Ultimate Beginners Guide to Using Electric Motors for Makers and DIY Projects; #068

Рет қаралды 2,000,000

Пікірлер: 3 000

@2049bits 5 жыл бұрын

Smart man, well spoken, info per minute rate ( IPM) is great! THIS is a KZfaq, Best Use: shared Experience. Thank You. Subscribed!

@LaneLarson 5 жыл бұрын

I second this. Excellent all around!

@jakeschrag 5 жыл бұрын

I was about to leave this same comment befor I saw yours. Thumbs up

@MisterKaen 5 жыл бұрын

I agree with you 100%

@2049bits 5 жыл бұрын

@@jakeschrag thanks for your support of making YT great!!

@slowburntm3584 5 жыл бұрын

I don't subscribe after one video very often, great video, thanks!

@markproulx1472 4 жыл бұрын

This can't be KZfaq. There's no stupid music. The presenter gets right to the point and provides supremely useful information. I'm confused.

@coguard3798 4 жыл бұрын

your not alone

@firuzpulatov7750 4 жыл бұрын

I was planning to fast-forward/skip the video, but continued to watch it because of your comment. Thank you!

@firuzpulatov7750 4 жыл бұрын

@Zane Zuccaro obviously youtube trends ;)

@fritzwilhelm8258 3 жыл бұрын

I also am struck relatively silent. Except for now...

@seanbaldeschwiler1891 3 жыл бұрын

Indeed it is Mark. How are things on the farm?

@padler5106 3 жыл бұрын

I've spent 40 years in the electrical end of industrial machinery and I know a lot about motors and controls. Jeremey taught me a few things watching this video. Well done. Smart man and he knows what he's talking about.

@flyback_driver 7 ай бұрын

I agree. When I started really tinkering and designing projects I've wanted to for years this is where I started. I think what I really like about his content is the layers. It probably took me (from zero) three years to completely grasp the information in this video and actually apply it. I'd watch it and then learn basics about electrical circuits. Come back apply the electrical design knowledge and get more from videos like this. It wasn't until I was designing my own vfd for my lathe to run a three phase motor that everything sank in and there's probably so much more I still don't know. "There are known knowns..." Haha Donald Rumsfeld always comes to mind when I think about the fact there's information I don't even know I'm missing but yeah man it's been two years. Come back and see if there's even more you might learn.

@stevelasher422 3 жыл бұрын

This guy is like the Bob Ross of Electric Motors. Stays in his lane, and gives TONS of great info. I could listen all day and I'm not even an electrician. Just awesome.

@totofromfrom1812 3 жыл бұрын

Happy little treadmills

@toddpiercey6595 2 жыл бұрын

Yes or like the Julius Sumner Miller; Who never gets the attention he deserves.

@thunderkunt5416 2 жыл бұрын

Bob Ross = Fraud !

@luciusseneca9162 2 жыл бұрын

Best part was "I'm not even an electrician". Lol same here

@richardcranium3417 2 жыл бұрын

I’m not an electrician but I play one on tv.

@kyleloudon 2 жыл бұрын

I’m a mechanical engineer and just wanted to say that you are a great teacher and I really appreciate your videos. Please keep doing what you’re doing!

@matthewwilson4592 4 жыл бұрын

This is KZfaq at its finest. No BS, no gate keeping, no talking down. Just good info with a nice defined scope and purpose.

@vimalakirti3908 4 жыл бұрын

I respect any man who drags a wood-chipper home to pull the motor.

@vimalakirti3908 3 жыл бұрын

@CW NunyaDamnBiznez I drag home anything with a wire

@baburaospeaks2429 3 жыл бұрын

@@vimalakirti3908 😅good one

@ruinunes8251 3 жыл бұрын

Vimala Kirti You just made me laugh lol

@ruinunes8251 3 жыл бұрын

Now imagine him dragging the chipper home just to find out that the neighbour already took the motor out😂😂

@philldavis5778 3 жыл бұрын

@@ruinunes8251 I imagine he would check that before dragging it home lol, he seems a little to intelligent to make that sort of mistake. I on the other hand have made that mistake 😂🤣 I'm so glad I have come across this channel as I've been dragging all sorts of appliances home and taking the motors out of them with the intention to learn how to reuse the motors, I've got milk crates full of motors now and finally I've found someone that explains things in a way I can understand. This is the first of his videos I have seen and I subscribed in the first 2 mins.🙌🙌😁😁

@Poljski 3 жыл бұрын

I have been through high school and collage for Electrical Engineering but none of the teachers could explain these principles in such an easy to understand manner, I am truly in awe. Thank you very much for sharing this knowledge!

@davidsawyer1599 3 жыл бұрын

Hello My brother in-law is a software engineer. In other words he's bad cholesterol. Of no use. Makes every day things insanely over complicated.

@bnb7094 2 жыл бұрын

There's No use for an education that doesn't teach you how to figure things out yourself. If there was, you'd be taught the basics so you can build upon them and actually learn the subject matter. Memorization is not knowledge. Information/data is not knowledge. A book on a shelf or an internet search engine is not knowledge. Applying information to your daily life is knowledge. If you can't make it work then you do not know it.

@Mr.8r1ce-8usch Жыл бұрын

Im hoping you wrote 'collăge' instead of 'college' on purpose. 🙂

@Mr.8r1ce-8usch Жыл бұрын

@@AJNoon I Fukin' knew it!!!!!!! Lol

@nxbeh9975 Жыл бұрын

Hey do you know any other channels that are as good as this guy

@SEThatered 2 жыл бұрын

I am glad your channel got recommended to me. Once in a while algorithm works.

@01blackhat 5 жыл бұрын

I'm watching you for the first time, and what first struck me is, if you are not a teacher or instructor in your professional life, you are keeping a gift from the world. You got that.

@CortMarshal 5 жыл бұрын

This video ALONE has reached 180,000 people so far. I'd say he's not worried about keeping things from the world...

@sixtycats8652 5 жыл бұрын

@@CortMarshal hey come on dont be like that. no need to be needlessly confrontational.

@greekkidshows9373 5 жыл бұрын

@@sixtycats8652 I don't think he is He is having a hard time saying thank you & that he is good at what he is doing. That he should be a teacher because all his students will learn! Unlike most teacher's that can only teach those who already know some. Those teacher's usually need to be corrected at least on a few occasions

@AndyNav1 5 жыл бұрын

Agreed 100%!

@sixtycats8652 5 жыл бұрын

@@greekkidshows9373 true.

@christopherdahle9985 4 жыл бұрын

This is what I want to see on KZfaq, real information from someone who knows what he's talking about.

@hibernianmelody6761 2 жыл бұрын

Exactly.

@MahmoudSuhail 2 жыл бұрын

This man should be well supported. And it’s the second time I say such a thing since started using the internet.

@H0mework Жыл бұрын

Your ability to speak to the layman and teach complex subjects without resorting to jargon is incredible. I'm subbed!

@williambarnes7948 4 жыл бұрын

"Fat kid on a see saw" this man speaks simple truths!

@cameron-wy4wd 4 жыл бұрын

Haha

@fredprater5012 4 жыл бұрын

when you're the fat kid there are no see saws only catapults

@1414141x 4 жыл бұрын

Cruel, but a great analogy !

@omni574 3 жыл бұрын

@@fredprater5012 I was the fat kid, can confirm.

@JareBareXP 3 жыл бұрын

I'm a fat kid and my see saw felt this

@jorgedante007 5 жыл бұрын

Perfect!! No background music !!! No distractions,easy to understand.😊

@ManuelGomez-rm1rt 4 жыл бұрын

Straight to the point

@David-bc4rh 4 жыл бұрын

Instantly hooked. No flashy edits, besides the fast forward, which is fine with me.

@mystical388 4 жыл бұрын

No slideshows

@markproulx1472 4 жыл бұрын

Good grief, no kidding!

@nunyabisnes6543 4 жыл бұрын

Zaklee!

@kennymiller4428 3 жыл бұрын

how could anyone, NOT, like this video

@Good-Enuff-Garage 2 жыл бұрын

The best video on motors on KZfaq ! so we can not use a potentiometer on a motor, I am a total newb, trying to learn this stuff

@user-sc5ob5ek9h 3 жыл бұрын

Learnt more from this guy in 10 min than my 3 years in technical school.

@TheBinklemNetwork 3 жыл бұрын

sounds like its time for *puts sunglasses on* you to cut your losses. YEEEEEEAAAAAAAHHHHHHH

@chrisrose774 2 жыл бұрын

Frin k. Mrinov

@KatoOnTheTrack1 2 жыл бұрын

That’s not good. We’re you listening in class? This is strange forward stuff with respect to motors.

@dubmob151 2 жыл бұрын

@@KatoOnTheTrack1 did you really mean straight? That's strange otherwise.

@willylo4090 2 жыл бұрын

No question here.. just a big thank you. And praying you will bred more of the same minded people.

@sailingheretic Жыл бұрын

BTW, you are obviously the type of super-smart dude I admire…the type whose knowledge is based on real world experience!

@leebrewer1190 5 жыл бұрын

You, sir, are a GREAT teacher. You are logical, organized, and easy to follow. The quality of your content is something that would take forever to piece together into a coherent source from other bits and pieces of info scattered through books and the internet. This from a researcher and professional teacher.

@reaDm4earl 5 жыл бұрын

Agreed

@DavidTangye 5 жыл бұрын

@@REL602 I can't believe you didn't learn a single thing. no you won't learn everything all at once and you may need to replay it perhaps two or three times or more. however I can assure you that many beginners should be able to get a heck of a lot out of this sort of video if they set their mind to it. You also need to take notes off anything that you don't understand and go look elsewhere to explain those specific things. Don't be lazy. Learn how to learn. Hopefully they tried to teach you that at school..

@JeremyFieldingSr 5 жыл бұрын

@@REL602 This particular video is focused on how to apply the various motors for beginners. You would really enjoy the "how motors work" playlist. There is one on three phase as well as all the types. My personal favorite is "how motors work; DC motors". It is the very beginning of understanding motors. They are linked in the description as I described in the video. It was just too much detail for one video, so I pointed you to other videos where I explain those kinds of things. I promise it will explain at the most basic level what three phase is, and any other motor question you might have in that series.

@ayporos 5 жыл бұрын

Really? I wouldn't rate him a 'GREAT' teacher. He is constantly mixing his words (for instance saying power where he meant torque) which is quite confusing if you don't already understand the concept. I'll concede that he does know what he's talking about and his intentions are good, but such blatant mixing and mashing of wrong words I cannot appreciate.

@fidelismutya1876 5 жыл бұрын

Awesome thanks

@RealEngineering 5 жыл бұрын

This was great.

@natedunn51 5 жыл бұрын

well if real engineering says it's great, must be worth watching.

@Zlugs 5 жыл бұрын

What are u doing here buddy *insert lenny face*

@elguapo1690 5 жыл бұрын

I wonder if I'm here because of Real Engineering...

@bureaucratbayonet 4 жыл бұрын

I saw the title and thought it was a real engineering video

@mr.waffentrager4400 4 жыл бұрын

OOOOOOOOOHHHHHHH....

@tonylawless5626 2 жыл бұрын

In case nobody told you today I just wanted to say you're amazing my friend keep up the great work. You inspire me

@SeeSaw72 3 жыл бұрын

Excellent description on various motors available to us home engineers.

@MucaroBoricua 5 жыл бұрын

I wish all KZfaq videos were concise and informative like this one.

@kaden56 5 жыл бұрын

This guys channel is gold. He’s on my top 10 recommended for engineering friends.

@JeremyFieldingSr 5 жыл бұрын

Thank you! A Recommendation is the greatest compliment

@Yonatan24 5 жыл бұрын

And Matthias Wandel Marius Hornberger Jer's woodshop (did he change the name?)

@erict964 5 жыл бұрын

@@Yonatan24 Jeremy Schmidt

@rid359 5 жыл бұрын

Top 10!!??? Top 1 I’d say!

@thisoldminewithlars5324 7 ай бұрын

Any time I have a question about motors, I simply refer to Jeremy’s videos. He has something about everything.

@Wbjpen 3 жыл бұрын

I don't know where to begin. I appreciate these videos so much. I just found this channel from reddit and can hardly believe the quantity and quality of these engineering videos. Mr. Fielding has enthusiasm, clarity, and technical prowess in abundance. Thank you!!

@zapatatapaz 5 жыл бұрын

Clear, with abundant information, and the consciousness of countries other than the USA existing, thank you.

@JP-xd6fm 5 жыл бұрын

True, so hard to find such a nice american just not thinking USA is the entire world. And also, very nice accent, I'm not english speaker and I understood all of it... well I had to google what a treadmill was lol

@tomyy666 5 жыл бұрын

Great way to put it.

@iian_ 5 жыл бұрын

@@JP-xd6fm You realize that this is how most middle class people speak in the U.S., right? Also you are on a platform based out of our country. So who is the one being rude saying you should be included?

@JP-xd6fm 5 жыл бұрын

@@iian_ Sorry, movies, music ant tv gave me a bad idea of how the afro-american people speaks, for example for me is hard to follow Dave Chappelle's stand up or Chris Rock, maybe also because they speak so fast, lol. What do you mean I'm in a platform based out of your country? , I don't get that.

@Styno91 5 жыл бұрын

@@iian_ What is that supposed to mean? "KZfaq is American, so everyone outside the US should either stand in line or fuck off" ?? Im guessing that kind of thinking is the exact thing Francisco, backed by J P meant.

@beckwil0852 4 жыл бұрын

I am a 67 year old grandmother who wants to learn more. Your video is one of the best I have ever watched on KZfaq. I actually learned something rather than listening to someone who just likes to hear themself talk. Thank you and keep making these videos.

@mackdaddy1891 3 жыл бұрын

Let me just say brother you are one hell of a teacher

@alitabattleangel9403 2 жыл бұрын

Im not patient for long videos but that 19 mins felt like 2 minuites. Thank you for the lessons sifu

@jonrok8576 5 жыл бұрын

Can't recall seeing anything on yt without at least a few loudmouth know-it-all/troll comments...I scrolled down a good 2-3 pages & only saw gratitude & respect... & I totally agree with them. Good work man. I wish my organize could mind function so & effectively!

@LBCAndrew 4 жыл бұрын

Agreed. Though it makes me wonder who those 432 people are giving the thumbs down.

@JordanBartholme 3 жыл бұрын

Did what you see there I do.

@JordanBartholme 3 жыл бұрын

@@LBCAndrew Haters.

@R3lay0 3 жыл бұрын

@@LBCAndrew Most likely Austrialians.

@timlucas143 4 жыл бұрын

Jeremy is a legend at explaining things accurately and concisely.

@bernardwind1633 2 жыл бұрын

Eloquent explaination, love your candid delivery style

@notoriouselwood9253 Жыл бұрын

focused intent, Usable information, expert delivery, valid opinion posed from the "one of us" perspective. 10-10-10

@dead_warrior_wae 4 жыл бұрын

one of the last remaining 'straight to the point' channels. what a gem

@hgbugalou 5 жыл бұрын

Great info. You have made it where I strip motors out of anything I throw away.

@Alkatross 5 жыл бұрын

Me too! I rip motors of all sizes out of my old junk. Even tiny motors. Cd drives to vacuums to garage doors

@MikeRobinson-ur8tv 2 жыл бұрын

Ya this guy is the first person that's been able to break this down so that I get it lol.

@user-ev3dq5yi1q 9 ай бұрын

You clear but not over simplified presentation cleared up some confusion / questions I’ve had about motors. Thanks

@harlanbaker7476 5 жыл бұрын

I've been called a hoarder because i save perfectly good motors out of things. at work we replaced an 800 dollar pump, i took it home and removed the pump and swapped the squeaky bearing and it works great. I wish more people would realize that its not trash and things can be fixed.

@RickTrajan 5 жыл бұрын

Components with smaller components can only need a small component but is the time for diagnosing, looking for those specific parts, chances of wrecking more things and down time of the equipment worth it? I personally think that learning to breakdown and understanding components to it's smallest component have some utility but the industry for the most part doesn't - except for people who work on machinery I'd say.

@soarer282 5 жыл бұрын

I am guessing you don't work in China, Russia or India.

@RickTrajan 5 жыл бұрын

@@soarer282 if you're talking about me you are right.

@peetre 5 жыл бұрын

Sorry, I see a divorce in your future!

@destroyer4416 5 жыл бұрын

If i ask to take a broken motor home i can't so yeah there are more people that wanne fix "trash" but most are not allowed

@taterfpv 5 жыл бұрын

Just excellent. Its rare to find someone with such a complete understanding of a subject able to share it seemingly effortlessly. I don't know if you are a teacher in your paid profession but you sir have a gift. First visit. Subbed. Thank you.

@jamesmichaelcabrera9613 4 жыл бұрын

TaterFPV Same here

@JordanBartholme 3 жыл бұрын

I concur. Bravo and Subbed.

@edwardbrownstien8741 3 жыл бұрын

Same.

@naturestudy100 3 жыл бұрын

If he is not a teacher, he certainly should be.

@FlyingAxel1010 3 жыл бұрын

Same here, excellent video !

@abebaabeba484 2 жыл бұрын

Hi, Jeremy Fielding 1. You explain motors in concise 2. Your voice and your English is excellent 3. Deep knowledge 4. Good you wrote some words Do it more !!!!!!!

@theinsaneunknown 2 жыл бұрын

This was the perfect amount of every ingredient.

@The-KP 5 жыл бұрын

One of the clearest explainations of motor and power facts I've seen yet. My college professor managed to unnecessarily overcomplicate this very same topic area, confusing a whole class! Only the strong survived, but Jeremy's style is very acquirable.

@tolkienfan1972 3 жыл бұрын

You know someone is good when many questions are answered with links to their other videos!

@SamieMac1 2 жыл бұрын

I think it's pretty cool that the smartest guy on KZfaq is humble enough to tell you up front he could make a mistake..

@rubertdandsalceda3861 Жыл бұрын

WOW. THIS GUY SHOULD BE HIRED TO GIVE PEOPLE BAD NEWS IN A GOOD WAY. He's very engaging,well spoken,and educating!

@Smershsh 3 жыл бұрын

I just found this channel, this is the 5th video i'm watching in a row. My weekend is shot now.

@CharlesCarabott 5 жыл бұрын

Jeremy Fielding you are a one man electric motor engineering university. Thank you for sharing your knowledge

@rrmusicman1 2 жыл бұрын

Jeremy, just to let you know this old eight plus year old loves your videos don't stop making them. Thanks

@algordon5843 20 күн бұрын

Just watched this video for a second time after seeing it a couple of years ago. It was just as entertaining a second time around but this time I was chasing information for an upcoming project and as I expected it had the stuff I wanted. Thanks.

@sheldonkirschbaum6213 5 жыл бұрын

Excellent practical professional teacher. Wish I had him teaching me 50 years ago.

@eilertb1310 3 жыл бұрын

Jeremy, you are fantastic at getting your message and knowledge across to us. You have a great blend of taking technical specifications and merging it to real world applications. Keep up the great work, I can’t stop watching your videos and I’m excited to see more.

@Silkroads733 2 жыл бұрын

this is why its said that we all have are gifts, this man was born to teach and be excellent at it.

@davidday866 2 жыл бұрын

This wins the internet today

@futureshock382 4 жыл бұрын

KZfaq reccomending something that DOESNT kill my braincells? Did I shift realities again? Great video, very clear and dense with info

@goju09alt9 4 жыл бұрын

You didn’t know? We switched to Universe #447

@beaconblaster33 3 жыл бұрын

We all have this in common

@joerobinson4453 5 жыл бұрын

A pleasure to listen to someone who understands their subject as well as this person.

@MrMaikeul 6 ай бұрын

Dude. If only KZfaq was like this everywhere. Amazing video. Thank you for the time taken. :)

@TheMoppersmurf 2 жыл бұрын

Interesting from start to finish and so easy to understand, even for a 62 yr old Dutchie:) Your vid's have value!

@surfinpsych 3 жыл бұрын

How am I just now finding this? You are amazing, sir.

@FL-gg4dq 3 жыл бұрын

This was one of my biggest things confusing me when I started building stuff. Thanks for explaining !

@bmccabe2147 3 жыл бұрын

you need more than a youtube channel, you need to be teaching in a classroom or lab! amazing video thanks

@JeremyFieldingSr 3 жыл бұрын

Well... I like the KZfaq platform actually... consider how many have seen this video... vs how many would see it in a particular lab or classroom. But I understand what you mean :)

@rishierish7720 9 ай бұрын

Good stuff wish I had you as a teacher when I was younger.

@0MoTheG 4 жыл бұрын

Now I look differently at treadmills. Now I think they are "useful".

@redangrybird7564 4 жыл бұрын

More useful dead than alive, ✌😵

@BrilliantDesignOnline 4 жыл бұрын

Not JUST for using as a clothes hanger.

@paulsmith778 4 жыл бұрын

HA! I feel you!!!

@dubsbarry9963 3 жыл бұрын

😄

@TimTrOn3000 3 жыл бұрын

If you want to blow your knees out, theres few more useful things

@P_RO_ 5 жыл бұрын

An excellent presentation as always. Other guys have covered the differences but they are either too deeply technical or too shallow. You always strike the right balance and make the info understandable for the average tinkerer. One of the best YT channels ever!

@glenndrew7917 3 жыл бұрын

Stumbled on this and watched it all the way through. Clear explananations. Will look at discarded appliances very differently from now on.

@walkingthruyourdata-6019 2 жыл бұрын

I swear, I don't know how I learned anything without You Tube. You have wonderful understandable explanations. The military training isn't as good. Thank You!

@snucc1000 2 жыл бұрын

This presentation was flawless in so many ways, it doesn’t feel like KZfaq. Thanks for sharing your immense knowledge man.

@rp4b449 5 жыл бұрын

As a fellow engineer, much appreciated. Have a go at permanent magnet multi-phase motors.

@alhajisesay2188 2 жыл бұрын

u made me a proud black man . god bless u . u know your stuff

@sherrybaig3159 Жыл бұрын

Big fan of yours from Pakistan. i am a mechanical engineer and i always watch your stuff before doing some of my own DIY. especially in concept building.

@johnberumen1666 2 жыл бұрын

Studying engineering right now and I’m very glad I found this channel, real life application conversations are the best! You’re doing gods work 🙏

@nathanbrungardt7885 4 жыл бұрын

Jeremy, you have no idea how happy I am to have found your channel, I recently was lucky enough to land an operator job in a power plant off the street where they are going to "train/school" me on the job, I was struggling with all the various motors that we use on different types of equipment and the way you teach and the knowledge you have is truly a blessing, thank you so much for your time in making videos and teaching others man, I greatly appreciate it!

@youpattube1 3 жыл бұрын

Motors. A very big subject. I think you have done a good job of providing an overview of them.

@hobbesip1 2 жыл бұрын

A lot of great practical knowledge in rapid:fire mode. Electric moders have a lot of configurations. This guy has experienced a bulk of scenarios. Pay attention and watch it over and over

@Kieran0 5 жыл бұрын

"you put a fat kid on a see-saw" SUBSCRIBED

@SteveJobzz 5 жыл бұрын

Engineers can't be bothered with this PC crap..

@zlotvorx 5 жыл бұрын

@@SteveJobzz In my mental image there was you and Kenny on a see-saw :)

@freggo6604 5 жыл бұрын

Can't wait to find the first negative comment about this 'insensitive' way of telling it as it is. As for me, I liked it :-) Way too much political correctnes out there.

@jaykyu1 5 жыл бұрын

If the fat kid just had lunch, he has to sit closer to the FULL-CRUM while the skinny kid farther from the the fulcrum or the see-saw will be tilted to one end and the skinny kid could fly over the fence. :/ that's torque in PCics.

@bobinthewest8559 4 жыл бұрын

PC police, watch out... lol

@andrewbezzina87 5 жыл бұрын

I am so glad KZfaq brought me here. This channel will become really useful when i start doing my DIY projects

@michaellocken2452 2 жыл бұрын

Wish I could hit the like button more than once. This video deserves many moments of "Wow this is awesome!"

@rikityrik Жыл бұрын

Your channel is by far one of the best I’ve seen lately. You better get ready for the competition, I’m gonna to start hoarding motors!! 😆✌️

@NorthernKitty 4 жыл бұрын

Just want to thank you for putting this video together - even though this is an "introductory" video, you cover a lot of ground that left me feeling like I have a solid overview of the types of motors that are out there and why I may wish to use one versus another. You organized the information thoughtfully and efficiently, and communicated it clearly and concise. Great job!

@88cameras 3 жыл бұрын

This is professional grade education material IMO.. I often wonder if YT will ever try and find the best videos of every topic and start an actual university out of it?

@bryanfarrow914 2 жыл бұрын

As a qualified, tradesman armature winder for over 40 years, I can assure viewers that this bloke knows what he's talking about.

@roha8993 2 жыл бұрын

Gotta love this guy, as if he's teaching his young children. Does presentation to make it so easy to understand. Gotta be a great parent.

@jimh6780 5 жыл бұрын

Jeremy, welcome to the hall of heroes ... this is an awesome video.. I'm restoring a band saw right now, and i have plans that include a need for your tutorials... I'm glad I ran across your site.. intelligent, eloquent, 'smart' (shows in your demeanor and presentation) and a very likable guy... may you prosper greatly.

@mudsuckingpig6246 4 жыл бұрын

26 year electrical maintenance and I love the your teaching, keep it up!

@nelsontheseagull Жыл бұрын

3 years later and I am coming back to watch because I have a specific project. This is free school for me. Thank you

@dtvm7469 2 жыл бұрын

Answered my question in first 5 minutes. Thank You, Jeremy.

@JevonMusicGroup 5 жыл бұрын

Love your videos! I'm a middle school STEM teacher, but always been a tinkerer at heart. I can sense your passion for this stuff... you're helping to reinvigorate my passion. Thanks!

@drhjr7516 5 жыл бұрын

Very nice! Tech for 30 yrs. Learned something new today. Thank you

@hanlines Жыл бұрын

Mr. Fielding is one of my favorite makers and teachers anywhere.

@montana1636 3 жыл бұрын

I’m on my girl friends KZfaq account, she’s not interested in this topic but I am, and you’ve answered quite a few questions in a practical application format. Now the only challenge is remembering!

@iansutherland4902 4 жыл бұрын

I did not pay enough attention in back in school and this video made up for that shortcoming. Thanks

@pacowang283 5 жыл бұрын

That was an excellent video. Thank you for the education

@lucasdominichini3095 8 ай бұрын

Future engineer here, this video is as clear as it gets. Thank you sir.

@tvsinesperanto7446 3 жыл бұрын

Damn Skippy! Usually I have to watch these sorts of videos at 2x speed. This is the first time I ever felt like I had to slow it down! Really information dense, logically organised, and brilliantly presented. I wish more people who make hobbyist/maker type videos would take the "Just the facts, ma'am." approach. Except This Old Tony. I could watch and listen to that guy make stuff all day. You, my good sir, have earned yourself a shiny new sub. I'm told by people born after the advent of colour TV that those can often be worth as much as cents per year to you newfangled KZfaqr Google machine whatsits. You're welcome. Don't spend it all on broken treadmills.

@mrkoemantekpeh 10 ай бұрын

I can relate. 2X speedwatcher and im watching at x1 and im taking it back more than once cos I missed something that I had to hear over again