Ultimate Clamp Storage For Small Garage Workshops

Ultimate Clamp Storage For Small Garage Workshops - Space Saver!

Рет қаралды 40,501

7 күн бұрын

SUPER SPACE SAVER! I needed to organize and store the few clamps I have. Because I have a small workshop I did not want to sacrifice the wall space required for a conventional clamp rack.
A little out-of-the-box thinking and this is what I came up with.
GET PLANS!
thewoodworkersplans.com/
Need hardware?
Amazon - amzn.to/3RLJapi
To support my channel visit one of our merch stores:
USA - teespring.com/stores/woodshop...
EU - teespring.com/stores/woodshop...
Or follow my projects on social media:
Facebook: / woodworkjunkiesite
Instagram: / woodworkjunkie
Check Out My Gear (Affiliate):
USA - www.amazon.com/shop/woodshopj...
UK - www.amazon.co.uk/shop/woodsho...
Some product links may be affiliate links, meaning I may earn a commission if you click on the link and/or make a purchase. The price will be the same whether you use the affiliate link or go directly to the vendor’s website. By using the affiliate links, you are helping support my channel and I genuinely appreciate your support.
Disclaimer.
All of the videos on this channel are intended for entertainment purposes only.
Should you choose to make or do anything as depicted on this channel you would do so at your own risk.
Woodworking and the use of power tools can be extremely dangerous.
The equipment and methods I use may not work for you as it does for me and by no means do I suggest that my methods of working are correct.
Therefore you should always use your equipment and power tools as instructed by the owner's manual supplied by the manufacturer.
Always use protective gear where applicable and never attempt something you are not comfortable doing.
Your shop safety is YOUR responsibility, so therefore I accept NO responsibility or liability for any injuries or accidents you may have if you attempt to do the things that I do.
Please, stay safe and work smart.

Пікірлер: 59

@troyboy4345 5 күн бұрын

That my friend is a cheeky little build, that solves an often overlooked need, without hanging them all over the shop, nice one fella ! .... Hope you are over the hill on your recovery ? ... love from Yorkshire England !

@SmoothAlf 5 күн бұрын

I dig this! Great organization build. I was thinking you might need a hole (handle sized) cutout handle on each or just on wing. That way you're not grabbing from the top and the build falling over if you hit a crack in the ground when moving it. Or just adding a "C" handle to the edge of a wing.

@Chsbobcat1 5 күн бұрын

I’m always excited when you post a new video! You’re such a great woodworker and inspiration. I’ve watched some of your videos five or six times over. Thank you for everything you do!

@guycullum3927 3 күн бұрын

nice project, the turn table ability is a really good idea especially when little bits of wood can cause the wheels to bind and so topple over when trying to turn it. if you want more stability you have the perfect place under the device between the wheels. just add some weight there, couple of old bar weights would be perfect to lower the centre of mass.

@taylormcintyre5759 4 күн бұрын

Great project and video sir! I like how you’re just the smallest more casual or more comfortable in this one Please keep them coming!

@robertkerby2581 3 күн бұрын

Wow, an Absolutely Genius Portable, Clamp Storage Cart! I love the simplicity of this project, but your sheer Genius design is what stands out! Well done, Sir!

@colinroberts4892 32 минут бұрын

Always love the solutions you come up with for issues. I have a small garage in which i do my woodworking, and it's also for our cars. Your ideas for mobile solutions are great and i've adapted some to use so my tools are always out of the way unless i need them.

@averagejoesworkshop 3 күн бұрын

Nice build. It looks like something you might find at a store.

@pinkytaylor5845 5 күн бұрын

I love that rolling clamp rack! Nothing more annoying than have your hands full and needing an additional clamp. ❤❤

@woodrowsmith3400 3 күн бұрын

Crikey! Brilliant! I can see building three...because I'm somewhat of a clamp hoarder, and because I can see the usefulness of having clamps right at hand during large or repetitive glueups. F-clamps and squeeze clamps on one...pipe clamps and extra pipe on another...leftovers (😂) on the third. All in a compact and mobile form factor. Love it! Another thing...as a Yank I enjoy seeing tool brands that we don't see here. Never seen or heard of the cordless tool brand of the drill and saw. AEG is sold in the US under the Ridgid brand name.

@bradleytuckwell4881 4 күн бұрын

What a great design and it’s It’s a perfect fit for your shop

@KrazeeKraftZ 4 күн бұрын

Great idea, I'm also stretched for space so might have to make myself something similar. I do think you need a custom knob on the top, maybe a shape of your logo or the like.

@DKHomestead 5 күн бұрын

This is a great idea. The only thing would add is a lip or stop block for loose fitting clamps such as the "C" clamps to prevent possible fall out while moving.

@RichardMerrill3Hawk 4 күн бұрын

At first I thought the rotating rotator was a bit much, and it was too tall, but by the time you finished it and filled it, it was obviously a fine clamp solution for small space. I love to see each new video from you; I agree with @Chsbobcat1, thanks for everything and the way you share the reasoning behind each decision.

@zapa1pnt 4 күн бұрын

When you mentioned the "Lazy Susan" idea, I too, thought redundant. But, with a few seconds of contemplation, I understood the benefit. The wheels are for moving the rack around the shop but the carousel allows you to turn only the center, without the whole thing giggling all over. Also, the carousel is Made to spin smoothly, in a circle, but the four wheel arrangement is not. It"s very clumsy. 😁✌🖖

@projectrebuild908 3 күн бұрын

I think that is great. Not just for rge small workshop either.

@mamamiddleagedmotorcyclead6643 19 сағат бұрын

Great project! Nice one

@barrettdent405 4 күн бұрын

Nice design!

@scottrelstyle3647 4 күн бұрын

I cant believe you didn't think of using a clamp to stop the clamp's from falling off when you move it..... nice project, i need more clamp's first...

@TheRealJackDiamond Күн бұрын

I'd love to see what you can come up with for that portable compressor in the corner. Maybe mounting it on the ceiling or way up out of the way? It doesn't really need to be taking up floor space, and the only thing that needs to be mobile is the tubing.

@WoodshopJunkies 20 сағат бұрын

@@TheRealJackDiamond that is in the works. Just looking at mechanisms to easily lower or lift the unit into place and properly secure it.

@danielreynolds9631 2 күн бұрын

Great work sir!

@robertfalconer5089 Күн бұрын

My garage has rafters and all the clamps live up there above the work bench where they're easily reached and replaced.

@lakirbs8927 5 күн бұрын

If you were to place a cut out hand hole exactly where you place your second hand, that might make it easier to manouver ? Maybe ? Just throwing ideas out. I'm a very novice wood worker and absolutely love your ingenuity, and content.

@MarshallLoveday 5 күн бұрын

i LOVE this idea. I do need more clamps, but right now I can't say I have enough that this project would be useful. Maybe next year!

@mandyleeson1 5 күн бұрын

This is a great design, Jean, really innovative. The cost of materials for me is a bit prohibitive and I was looking for something that didn't take up floorspace in my small shop.

@crossgrainwoodproductsltd9230 4 күн бұрын

Another excellent idea sir!! Right now my clamps are on the floor due to a shop reorganization and not knowing how to organize them in my tiny shop. This idea of yours is just what I needed. Thank you for sharing it with us.

@dougggiereid 5 күн бұрын

Great video again. Your constant innovative ideas are inspiring. I have really enjoyed every video you have released.

@Sebastopolmark 4 күн бұрын

Very well done. You still have some space to add even more clamps. Thanks! !! !!!

@MCsCreations 5 күн бұрын

That's actually brilliant, Jean! 😃 I may even buy the plans later! Stay safe there with your family! 🖖😊

@paulvanhouts3365 5 күн бұрын

Those clamps do present challenges as you grow the collection, based on need. I used an old 2 wheeled hand trolley and welded frames to hold small clamps and pipes near the middle for taller heavy clamps. Now I just move it where I need it and it has a very small footprint. I do have a large pvc pipe as storage for my 8’ pipe clamps as they are too tall and heavy, the pipe is hung off the rafters so it’s out of the way. I like seeing how others solve 5his as I may adapt ideas to what I have. I do get a lot from your videos, thanks for sharing.

@sheltonsmith9270 4 күн бұрын

looks great. How about a hand hold in the sides where you keep grabbing??

@BrouBrouZebra 5 күн бұрын

Great project, love the built. Starting at 13:16 and for the next 1min, it is obvious where you are putting your second hand on the rack, and I bet you could benefit from a handle at that position. A finger hole or simple groove would prob be sufficient. Anyways, great storing solution!

@tpsooner7816 4 күн бұрын

Really nice!

@Gazman299 4 күн бұрын

That's a great idea. I'm struggling with clamp location now, but this has given me inspiration. Thank you. Subscribed.

@onehandcowboy 5 күн бұрын

I have my spring clamps on a aluminium L-profile, so that the spring isn't under tension (seems to be better for the spring and keeps it tension power ;-) ) . Nice project btw :)

@robertfalconer5089 Күн бұрын

My small spring clamps are all on a cable in the roof like pegs on a washing line.

@TomsBackyardWorkshop 5 күн бұрын

I built a storage system for my clamps last year. Ive already outgrown it.

@braddeboer9317 5 күн бұрын

I'm invisioning cut outs for you to pull it with your hands.

@raymitchell9736 5 күн бұрын

A very interesting way to store clamps. I think that you have a lot more space on that cart but then it might risk getting too cluttered. Still, it is a way to bring the clamps closer to your work, however, in a small shop, I have a French cleat system and it's not a problem. And yes, I did think the turntable was redundant but now that you built it, I changed my mind. I'll keep this solution in mind in case I find a use for it. Thanks a bunch! Cheers!

@blainespaulding3197 5 күн бұрын

Inspirational! Appreciate the work you do here. Thank you!

@waynemahler2015 5 күн бұрын

Always enjoy watching your videos, nice thought pattern and execution for this one。 Thanks。

@monomax33 4 күн бұрын

отличная идея !!!!👍👍👍

@chrisrnz 5 күн бұрын

Brilliant. Not even kidding.

@nickpotter1897 5 күн бұрын

Love the videos, you give so many ideas for my own small workshop.

@tonyseeley 5 күн бұрын

Really creative, great build. Love all your videos.

@markallinson4935 4 күн бұрын

Fabulous build, but I suspect your are unlikely to use that central pole as a handle. I think you are likely to grab the nearest wing of the carousel and pull it around... How about some grab holes in them?

@MrTapanes 4 күн бұрын

Hey, how many clamps do you have in your workshop that you DON'T own? Are you a serial tool-borrower?!! :-) Seriously though, I almost clicked off the video because I've seen dozens of them and have not been pleased by any of the designs until this one. By far the most efficient use of space in a clamp rack I've seen. Will be building something similar. Thanks!

@athmostafa2462 5 күн бұрын

Nice 👍

@user-oe8gj7fz6v 5 күн бұрын

🖖

@kobusyssel2840 4 күн бұрын

Nicely done, sir. Nice to see some SA content. Where are you from if I may ask?

@WoodshopJunkies 4 күн бұрын

CPT

@kobusyssel2840 4 күн бұрын

@@WoodshopJunkies Still there? Seems like the WC is the carpentry capital of SA. All the decent secondhand woodworking machines are from WC

@WoodshopJunkies 4 күн бұрын

@@kobusyssel2840 still here, yes. I've been looking at the markets for a nice machine to restore. Nothing has come up.

@kobusyssel2840 4 күн бұрын

Our options are very limited with small budgets. I'm glad you're doing these videos. Your projects are great. All the best with your channel.

@zedwpd 5 күн бұрын

Couldnt find the plans for this one.

@WoodshopJunkies 5 күн бұрын

Going up soon.

@guyh.4553 3 күн бұрын

Why do everyone that pists DIY videos ALWAYS seem to use such long bolts that stick so far out? And they either never cut them down or recess th bolt and use proper lengthed bolts? I say its being lazy. Great build but put some thought into it.

@eawoodworking 3 күн бұрын

@guyh.4553 I can’t wait to see your thoroughly thought out and executed video once you put one out.