Ultimate Dillon Toolheads: Zero Play, Free Float & More!

No video

Ultimate Dillon Toolheads: Zero Play, Free Float & More!

Рет қаралды 13,978

Күн бұрын

Full Story: ultimatereload...
UR on RUMBLE: rumble.com/ult...
UR on Patreon: / ultimatereloader
We’ve previously shown a number of Armanov upgrades for Dillon presses including the RL1100 quick change toolhead. This time, we’re looking at all of Armanov’s upgraded toolheads for Dillon presses and how their free floating lock rings work in tandem. Check it out in this video!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Armanov
- Dillon
- Hodgdon
- Hornady
- Inline Fabrication
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...

Пікірлер: 44

@dxpvxo711 6 ай бұрын

I wish there could be some innovative advancement in primer production. I can't imagine all these reloading equipment companies think people are going to just keep buying there products if you can't get components to use there products.

@brazilcabo8850 6 ай бұрын

I have been using these for a year, and I love them! They work great.

@rici_rowdy 5 ай бұрын

I am using the free float system at my Dillon 650. Loving it 🎉

@erikjensen6503 Ай бұрын

I'm using a uniquetek locking screw kit with the Dillon tool head. It works but that setup looks better

@bob_mosavo 6 ай бұрын

Thanks, Gavin 👍

@ACGuy1 6 ай бұрын

I have 3 of the free float tool heads and most of the Armanov upgrades on my 750. My issue is I don't trust the consistency of the free float for sizing and bullet seating. it seems like if you are measuring to .001 or .0005 it will be hard to keep it consistent. I want to use them as I really like to concept but i am trying to only change one variable at a time in my hand loading journey. If the movement is typical and not an issue that takes away from consistent sizing and seating depth then I am all for this system. I rate the tool head a 5/5 as well as everything else Armanov

@brazilcabo8850 6 ай бұрын

I ran into the same problem but solved it by testing stations 1 and 2 with a shell in battery. I updated the springs and bearing and a roller on my guide rod. I always keep my eye on the last 2 rounds in a run to make sure they don't vary without shells in battery in the stations. I use them on the 10 calibers I load for. They are great for the competitions I'm in.

@ACGuy1 6 ай бұрын

@brazilcabo8850 so you are saying you have cases is 1(deprime/resize) and 2(prime/powder charge) while you seat in 4 and crimp in 5? So the load on the shell plate is evenly distributed?

@brazilcabo8850 6 ай бұрын

@jeffeaston6908 Exactly. That's how I was able to get consistent seating depth. I found the powder die to be tricky. It's easy to say it would not interfere, but it totally does. I have tested each station and found they will impact seating depth a little bit individually and partially, and when all station are full. It's important to know your machine. It's a pain at first, but now it's a second nature, and the precison is worth it to me. I documented for my kids to be aware off, so they know what to do when I am not around.

@thatguyoverthere2288 6 ай бұрын

Great upgrade, except my 223 sizing die is threaded down so far it doesnt have enough exposed threads to use the lock ring.

@ACGuy1 6 ай бұрын

Mine is kind of the same way. I don't like keeping the lock ring on the bottom of the tool head. There really isnt a good solution. I wish they made a low profile tool head or something.

@thatguyoverthere2288 6 ай бұрын

I mean they make the one for cutter dies but I didn't know this would be an issue until after I got mine. Gonna have a friend with a mill cut mine down some so it'll work as designed.

@ChadHollman 6 ай бұрын

Curious, why bother free float the powder drop? Actually, why bother free float anything but the bullet seater?

@ChadHollman 5 ай бұрын

Regardless, Armanov stuff is awesome. I have so much of their stuff. And these videos really help me with my purchasing decisions. Whether or not it's worth it, how it works, how to install, etc. Awesome content and products.

@jameshwang4750 6 ай бұрын

If the dies needs floating why not just leave the tool head floating as is?

@tnapierala 5 ай бұрын

Because floating dies allow for every station to have tome play, not entire tool head. Much smoother 😊

@roddecker1900 5 ай бұрын

Iv wonderd about the side lockig screw on lock ring. The conventional ones will mess up my work i leave em loose. Guessing u get better consistentency seating iftool head has less play? And still line up right?

@user-nl6et5kl4c 5 ай бұрын

Pretty similar to the floating toolhead offered by Whidden Gunworks

@IWatchedWhat 5 ай бұрын

Interesting, I have an almost 40 year old 550, and have never done any upgrades to it. But that toolhead setup does look nice. Now what I want to know is how do you lube your cases for sizing before you toss them in that feeder?

@ackjr41 5 ай бұрын

I use Dillon spray lube on the brass before putting them into the case feeder.

@tonydevich7937 5 ай бұрын

Looks nice

@jameshalpin1580 6 ай бұрын

I like the setup superb just a question do you not lubricate with sizing wax when sizing as that is standard practice

@agoogleaccount2861 4 ай бұрын

Regular bar soap is good as sizing wax. Less "oil dings " not as clingy as wax ..Just spin the rim on a dry bar of soap

@ackjr41 6 ай бұрын

Why float the powder measure?

@tnapierala 5 ай бұрын

It's also flare

@MarkSmith-bd5zv 6 ай бұрын

Take the backfire challenge please

@chestnutlouie4709 6 ай бұрын

Dillon presses do not need upgrading. You may choose to add “bells and whistles” to your Dillon press if you want.

@lars-erikbtkerpetersen9466 6 ай бұрын

Sorry - but they certainly DO need upgrade(S) to work smooth & flawlessly. And Armanov delivers PHENOMOUSLY upgrades for Dillon. Sorry to say - but true... Dont be blind - see the possibilities instead... 👍🤓🔍 - Armanov rocks - Maybe the reason even Gavin gives them time in his phantastic and valuable videos... 🤔👍👋💪😃

@cole4406 6 ай бұрын

I’m not sure about that. Lee presses NEED upgrading. I haven’t added much at all to my Dillion and have been using it a lot.

@patrickvernacchio7540 6 ай бұрын

I agree with Chesnutlouie. I ran a 550B for 20 years before I started playing around with 3rd party updates. Need? Not really. 3rd party parts & accessories certainly enhance a handloader’s experience. I do applaud Arminov’s innovations, and have applied his accessories to my 550’s and 650.

@tnapierala 5 ай бұрын

They DO need upgrades. Example is short powder bar if you want to use bullet feeder on XL750. Floating system works fantastic for me. Also she'll plate with bearings is much smoother, no powder spill.

@cole4406 5 ай бұрын

@@tnapierala those are all add ons though. If you want more than what it does out of the box, you need those things, which is fine. You don’t NEED those things for the press to work well though. I personally don’t use any add ons and love mine.

@kuronyan3006Ackley 6 ай бұрын

👍‼️

@livincincy4498 6 ай бұрын

Why do Dillons need so many upgrades ???? What hasn’t Dillon upgraded their press designs? Legacy costs of their warranty prohibits innovation and change.

@ACGuy1 6 ай бұрын

Every press out there has aftermarket stuff made for them. Dillon presses work great and definitely have the best warranty. Fortunately I live 20 minutes from them in Scottsdale and every time I go in there and ask about something that needs to be addressed they hand me parts for free with no paperwork or questions. I broke the ring indexer and in less then an hour I was back up and running after a trip to their office. I'm mot a fanboy but they are a good company.

@lars-erikbtkerpetersen9466 6 ай бұрын

But still there's gaps for improvement - and they unfortunately are (a bit) conservative at Dillon... 😢😂

@patrickvernacchio7540 6 ай бұрын

They’re not really upgrades. The original parts they replace work and work well. However, there is always someone out there who’s going to want to tweak their machines.

@lars-erikbtkerpetersen9466 5 ай бұрын

@@patrickvernacchio7540 - Test'em and your opinion will change - if you dare... 😂