The first 1000 people to use this link will get a free trial of Skillshare Premium skl.sh/dronemesh10201 Frame: bit.ly/36KqcIV Coupon (BGM4108 15%off) Motors: bit.ly/33Hh2uZ Coupon (BGBP2508 20%off) Camera: bit.ly/2GDjg5P Coupon (BG15THRC 15 %) Flight Controller: bit.ly/2FgljMw Coupon (BGSUXF4 10%) VTX: bit.ly/3d7UAhG Antennas: bit.ly/2Sk5d6D Motor Wrap: bit.ly/3chFGUf Nylon Stands: bit.ly/3iHDsk6
@crunchied83 жыл бұрын
your $80 camra link doesnt work also what is the brand of the $80 camera as well thanks
@danouski3 жыл бұрын
what is the name of the app for IOS? EDIT: ask FPV got it! thx for mentioning it again at the end of the vid
@boncharusorn61733 жыл бұрын
octonauts
@abodlb3 жыл бұрын
You're creative, but you lose a lot because of the image of the show, please accept my point of view kindly🌹
@MrCuervo227793 жыл бұрын
What's the total estimated cost on a build like this? Also what is the capability of this vs a DJI Mavic Pro (aside from crash avoidance tech)? I love DIY hobbies and I have been on the sideline for a couple of years with the drone hobby. Is this something that helps you stay of federal registration or does EVRRYONE register with local and federal aviation registration authorities? Sorry for all of the questions as I said I'm on the sideline and I'm looking at joining in the future.
@ianmurphy44023 жыл бұрын
Total cost of all the links in the description is $408, without the $40 soldering iron and $22 silicone pad it’s only $346, you can find way cheaper soldering irons. This is a great cheap build I’m looking forward to getting the parts in the mail
@BredihinKA3 жыл бұрын
8:45 - Feel free to use soldering flux. Its quality will increase. I know that this solder contains rosin, but this is not always enough. Personally, I really like the paste-like flux for soldering SMD components.
@eagle70153 жыл бұрын
Used paste flux with all my time and make life just way easier
@dr.lexwinter86043 жыл бұрын
As a private pilot who doesn't get to hit the aerodrome more than once a year or two anymore and has to compensate flying very expensive drones watching you fling that thing around that abandoned buildings rafters made my blood pressure skyrocket. I'm used to any clip of the blades leading to hundreds to thousands in repair bills. I wish I had the liberty to fly it like it's stolen. :P
@infyrno3 жыл бұрын
Yes i love to see the setup vid.
@antoniodesilva3 жыл бұрын
Setup guide and flight video, please! :-)
@cesarango013 жыл бұрын
I have a love-hate relationship with the VTX you used. When they are good, they're good. But when they're hot , they're bad. Lots of snow when hot. Make sure you have good ventilation in-flight as well as while messing with it in non-flight. Had 2 burnout already. Arghh!!
@nstadsnes3 жыл бұрын
try out the AKK race ranger
@mjfw10 Жыл бұрын
Thanks for these videos. I'm building my first drone and I find them very informative. Just a soldering tip. If you use a damp sponge and wipe the tip clean regularly, it will be nice and "tinned" as it's called and will give you better control of your solder points.
@zakariaabderrahmanesadelao3048 Жыл бұрын
subbed, always wanted to get into drones, then you mentioned teaching AI. you are an absolute gem of a person. Thank you
@JohnnyEire3 жыл бұрын
The VTX has options of RP-SMA Female and just SMA Female. Any advice on which one is needed?
@timn44813 жыл бұрын
You can use software called eCalc to exactly select the motors, esc and props for the flight speed range and duration you desire.
@JordanHourGlassDJ3 жыл бұрын
I missed the link for the xt60 3D printed part. Would you be so kind as to providing it? Thank you in advance, and nice build! Explanations were right on point!🤘🏻🍻😎
@KernsJW3 жыл бұрын
I use these www.thingiverse.com/thing:3600008 www.thingiverse.com/thing:3998532 www.thingiverse.com/thing:2995171 Also, if using a decently flexible tpu try looking through the ones for double standoffs. I have had decent luck stretching them out to fit a few of my quads without having to mod the part
@DanielBerdi3 жыл бұрын
You need to release a freestyle drone build kit!
@bigtastyfpv63433 жыл бұрын
Right, I've built this exact drone with exact parts. You sir, are a drone guru. This set up is amazing. 120c 6s batteries. This thing is like a katana blade. That Runham. Looks like a go pro with a fish eye lens colours pop. Smash that vtx on 600 and I swear to god this thing rips thru the air!
@jamesneville4412 жыл бұрын
What kinda flight time did you get?
@bigtastyfpv63432 жыл бұрын
@@jamesneville441 over 5 minutes dude! Motors are spot on 1200mah speedy pizza company batteries
@ibrahimozgursucu33782 жыл бұрын
Pro-tip; get some high current 18350's, stack 2 on top of each other (with something insulating inbetween) and wire as parallel. Bam, an extremely high current Lithium-Ion 18700 cell, just a tad longer than an 18650. Repeat for however many you need.
@Crusader46333 жыл бұрын
Great video (as always!) Maybe do an updated one for '21 with true long range (eg, with GPS), and maybe iNav? I'm looking to build such a machine myself. I'm older, don't care about flippy-floppy Freestyle and I sure don't race; I just want to fly around and see the sights. (And digital is too expensive; I have only analog gear.) I'd love to see what's recommended for a "long range cruiser" from someone that doesn't seem to be oversponsored...
@ApidaeY2 жыл бұрын
I'd like to see this too
@KimCheongBRO2 жыл бұрын
Same. Tricks are cool, but i just want long flight time and range to scout and enjoy birds eye view of nature
@michaelrusso26433 жыл бұрын
Surprised you didn’t use Crossfire for RX. Great vid!
@bendixtrinity3 жыл бұрын
8:20 why am I holding my breath everytime i see smoke. 😂😂😂😂
@yannickg69043 жыл бұрын
Love this frame. I'm just about done buidling the 7in version.
@yannickg69043 жыл бұрын
The motors on mine are going to be the weakest link, they're 3BR 2407 -2600s that I will cap off at 50% using motor output limit.
@sobolmx3 жыл бұрын
Hi, can you suggest transmitter that is good to go with tutorial?
@motazmohamad3723 жыл бұрын
And how long does it fly for?
@akshaybajaj77543 жыл бұрын
Amazing video! Can you please link the apps which you mentioned for the FPV community
@MayankMYadav3 жыл бұрын
I just subbed for the quality video that you made! I'm new to fpv and am just playing around with a tinyhawk 2 FR RTF, learning the basics. I'll build my own maybe a few months down the line but I'm glad some people in this community are making educational content for the potatoes out there that don' t know the first thing about soldering or assembling a drone. Something even more helpful would be setting up this build in betaflight. Thanks!
@WhatYaGaming3 жыл бұрын
it doesnt matter what wire from the motor to the esc/pb.. you can make it work in the cli of bf..motorswap.
@thyresias1942 жыл бұрын
Thanks for your's step by step vidéo, good work 👍
@300blk_kc3 жыл бұрын
You and everyone else has done budget builds to put together the drone itself. The one thing that no one ever talks about is batter packs, controller, and fpv goggles. I've never owned a fpv drone and very interested in getting into it. But whick radios and goggles work with your setup in this video?
@nucleo17723 жыл бұрын
Good job...so what flying time you will get with 4s 18650?
@Clynikal3 жыл бұрын
I would change the way you solder to the ESC. From from the inside to the edge.
@FloridaWildlife3 жыл бұрын
The drone build I have been waiting for, TY DM!
@ikramshaikh2282 жыл бұрын
And thanks for your videos.I really learnt alot... much love
@dronepilot260rc3 жыл бұрын
Nice. I built a 7" with this frame. HGLRC f22 fc, HGLRC pro 60a esc 2407 1850kv motors. Crsf. 7040 bi blades. Cruises all day it seems :-)
@TheNucleo67 Жыл бұрын
excelente video, saludos
@carlosfuhrer3 жыл бұрын
Hi drone mesh i want to copy this exact build for long range, can i add a gps with this fc? If so which one would you recommend?
@BogHopperFPV3 жыл бұрын
Yes recommendations for a stack with Baro and I2C please
@TeezyThaKidd Жыл бұрын
i need to know where to get that battery connector mount/attachment thing 👀
@bennedictbyy3 жыл бұрын
How far can the Eachine TX805 VTx go? Few kilometers? or is it depending on the RTx in the goggles more?
@eccomi213 жыл бұрын
Minor nitpick, but that solder is 0.8mm Not 8. 8mm would be around as thick as the tip of your pinkie finger. Maybe a bit less.
@techatk3 жыл бұрын
Best FPV build videos out there. Love the format and super helpful tips for new builders like me. Thank you!
@piratapro_4kFPV3 жыл бұрын
So glad I found your chnl man!! Just getting into FPV and this is very useful thank you!!
@JanRhenoServanez-dz8ep Жыл бұрын
Hello bro what type of video monitoring you use on video transmitter
@lezbriddon Жыл бұрын
come late summer with some time free i need to try to build a decent 250g (silly laws) 4k drone. desont need high speed, doesnt need to be that agile, just be a light weight steady camera platform and rth/waypoints because code doesnt add weight...
@StarsAtNight1 Жыл бұрын
I would add a gps for long range flights.
@floridamangonwild2 жыл бұрын
Nice good quality content.
@fippobak3 жыл бұрын
Made the same configuration, seems ok, but the antenna is too small. It has interference with battery when going back. Changed antennas, increased range from 300m to 800m (may be longer, haven't tested yet).
@blankblank68833 жыл бұрын
Bro i need help about setup frsky transmission with reciver 8R pro...
@woltrexgaming18133 жыл бұрын
Can someone pls tell me which transmitter and receiver he is using in this build
@glossyfpv11553 жыл бұрын
Hey man. For a cleaner and more robust build you can run the motor wires on the opposite sides of the press nuts and standoffs. I do It on all my mark4 builds.
@DroneMesh3 жыл бұрын
I do that sometimes but this video took so long I decided to go the normal route to keep time to a minimum.
@glossyfpv11553 жыл бұрын
@@DroneMesh yea I feel ya on that haha sometimes just gotta speed through it. Great build though brother
@aceblisskin91643 жыл бұрын
There is a youtuber who makes invisibility shields Made out of a reflective Plastic I would love to see a invisible drown made from this material
@nurfitriabdhalim36073 жыл бұрын
Nice explanation! I couldn't wait to build my first drone
@0Bariq03 жыл бұрын
Wow great video, im gonna follow ur guide for my first build.
@ilkoderez6013 жыл бұрын
That frame is so beautiful. Probably my next frame...
@jt22483 жыл бұрын
I really enjoy your videos and have learned so much from watching them. I am doing my first build over the Christmas holidays so far i have the geprc mark 4 5 inch, mamba F405 MK 2 stack, rush tank ultimate vtx, foxeer t-rex camera and some emaxx eco II 4 cell 2400kv motors and a tbs nano reciever any recommendations on what i could have done better on parts wise?
@woltrexgaming18133 жыл бұрын
Can someone tell a budget long range tranmitter and receiver for drone not for fpv camera
@NCGaming2 жыл бұрын
When you click the motors i cant tell does it come in a pack of 4 or 1?
@XeseKaiPese Жыл бұрын
whats the best size for long range and best signal? 5 or 7? or else?!
@gilgsn2 жыл бұрын
Thanks. I built a very similar quad, same frame, motors.. Would you please post your PIDs?
@mohamedbashar3393 жыл бұрын
How can I get a camera like this Small but highly quality
@Satalite1k13 жыл бұрын
Is there a follow up to this video with it flying? I am a complete newby when it comes to drones. Before i would commit to buying parts would like to know specs for range and flyability of this drone
@manuelhuber72943 жыл бұрын
Can I build this Setup in the 5inch Frame? Or should i use other Motors or so?
@ManfredHuffer3 жыл бұрын
Great video! What do you think about GPS and an anti-collision system? We need new ideas for building drones.
@caelenfry33213 жыл бұрын
How do I tell if my transmitter is sbus or ibus
@thomasgilbert69243 жыл бұрын
Can I use flysky sbus to the stack
@stoneage36023 жыл бұрын
What is the total cost?
@happybub9927 Жыл бұрын
does anyone know where I can get this frame now in Dec. 2022?
@adampinkerton80913 жыл бұрын
Thanks for a well explained build tutorial with nice camera work, very helpful. Anyway im going to smoke a joint and print some 3D Farts. 😊 Cheers mate 🍻
@DroneMesh3 жыл бұрын
Ahahahahah I kept those in for a little humor.
@DroneMesh3 жыл бұрын
Thank you for your feedback it really gives me the motivation to continue.
@babarumraisin48633 жыл бұрын
What size propellers with link?
@jeffsmith61873 жыл бұрын
Hello there friend, just wanted to drop by and tell you thank you and to let you know I think you make the best tutorials I've ever seen. And also was wanting to know for example, would a $150 home built drone be equivalent to a 300 and $400 store bought one? Take care Jeff
@satyamevjayate21232 жыл бұрын
This guide is brilliant.👍 Can you tell max range upto this model will go?
@ayecob5583 жыл бұрын
Kind of a longshot to ask here but I have a question about my DIY FPV setup. I am running a modified Blade 200QX and was wondering how I can extend my FPV and overall flight range. I am using a Dx4e controller and currently only have about 300-400ft of range. I am wondering which Tx/Rx and Remote Control I need to extend not only my FPV but also my flight range. Thank you so much to anyone that can help!
@josefdahari3 жыл бұрын
Good stuff brotha. Love the mark 4 frame actually working on a Mark 4 build as I watch this
@clement17273 жыл бұрын
drones and AI. 2 of my favorite worlds collapsing!
@DroneMesh3 жыл бұрын
I hope i will match your expectations.
@DroneMesh3 жыл бұрын
Had to fix the typo
@dalissonfigueiredo2 жыл бұрын
Any endurance tests on the quad? I would like know how long and how far it can fly.
@sebe88953 жыл бұрын
Why would you do a long range build with a xm+? Doesn't that limit the range to around 1.5 km
@jedics13 жыл бұрын
Does the iron support all the most common tips? Also doesn't say the temp it goes up to, can it handle much thicker wire for bigger jobs?
@JamesElledgejameselledge3 жыл бұрын
What battery are you using?
@kudinkudos21543 жыл бұрын
Yes please do setup guide video also
@vladimirvv9683 жыл бұрын
спасибо, это видео придало мне уверенности. 😀
@k1ortia3 жыл бұрын
Just what iv been waiting for...Perfect.👍🏽
@mattott42743 жыл бұрын
Holy crap man... Thanks so much for the great video. Lived my life woodworking but have never had a mentor to get me comfortable with wiring electronics. Diving into drones with my kids and your vid has me instantly comfortable with the challenges and skills required.
@viljar13053 жыл бұрын
Yes do a video for the setup guide.
@mrbigb123 жыл бұрын
What flight time does this get?
@Fahad-cx8hv3 жыл бұрын
what is difference between 5, 6, and 7 inch drone frame which is best for freestyle and long battery life
@limestone_xyz3 жыл бұрын
would you say tbs tracer is also viable for long range? The range should be pretty much the same and diversity on the receiver should als help, no?
@mike3000ization3 жыл бұрын
Good video. Need to change the location of both antenna's imo
@louismje19673 жыл бұрын
hey i have a question about how to connect your cables, you have 3 black cables for each motor and you do not look at the order when soldering? why 🤔
@alexanderkis90413 жыл бұрын
what connector did you use for transmitter? SMA Female or RP-SMA Female?
@careysmoak54782 жыл бұрын
What’s the range on these ? Anyone know a mile or so
@ikramshaikh2282 жыл бұрын
How much is the flight time
@nightwolf4493 жыл бұрын
hi whats the code to run this drone
@svenhuf66523 жыл бұрын
How much kilometers can you fly? Which lipo did you use? I want build also a longe range copter, have bought radiomaster tx16s with tbs long range Modul with 2w, but I have problems to build the copter...
@MrAlvits3 жыл бұрын
Sir how many mah for battery and what size of profeller on this unit 7inch
@ShivamPatel-hl9ys3 жыл бұрын
What propellers do u recommend I have the same exact build as this ???
@halimsahlan3 жыл бұрын
Great video.. Can i just use any remote controller with this and any goggles or screen?
@madebymarcin3 жыл бұрын
Very nice vid and well explained 👍
@jericho36803 жыл бұрын
Can I mount my Hero 9 on that?
@erlandfpv3 жыл бұрын
Hi just want to ask, the frame, have a fake one, and comparing to the this original 7inch geprc mark4 frame, its different how we tuning it? The model its the same, i dont use any fake one of course
@nabinbhandari90823 жыл бұрын
How long does it fly?
@yankl13 жыл бұрын
Hi, do you have a stable drone not for racing but just for video and pictures
@marquisalexander32003 жыл бұрын
What's the flight time
@nabinhalder48673 жыл бұрын
Finally a build video after a long long time 👍 covering most of the details & nicely put together. But why don't you still prefer the digital video systems? Is it for the price?
@DroneMesh3 жыл бұрын
The latency is horrible. I have such a hard time flying in my bando when attempting small gaps and time-critical throttle inputs. If you see my Instagram you will see that nasty crash was because of the DJI. I never crash or break as much as i do with the HD Setups.
@nabinhalder48673 жыл бұрын
@@DroneMesh Yes, saw that crash, it must have hurt.
@caelenfry33213 жыл бұрын
I need some new goggles because the 40$ ones i have are falling apart. I am still fairly new and want a descent analog pair that wont cost too much. Any suggestions?