Love the family in the background :) Thanks for the great review!

I haven't even bought my motorcycle yet, and I just purchased this carrier. I even need to get a hitch installed too. LOL, This contraption is so much better than anything else I've seen, and I've seen a lot. Thank you so much!

Super chill. I like.

Video was super chill. Easy.

These carriers are good because you can use them as an engine stand to change out tires and chains etc.

Ordered one today....they are sold out everywhere in summer 2023 it seems the spring riders bought em all up and they are making new batches to ship in a few weeks. Thats testament to the product.

This is amazing, Very compact aswell. Thanks for having No annoying back ground music too, Cheers..

I was on the fence in getting one good video bro

Dope video totally buying this thanx

The biggest sale point for me, is that it doesn't put stress on your forks. 500$ but it will save me from having to do fork seals every year

Thanks for the great video Paul. I ordered one a few days ago. I think I m gonna feel a bit nervous having the bike secured from the pegs.. Any issues with bike's security while on the road ?

❤ also makes a good service platform to change tires or other repairs.

Hey Paul - great video. Quick question: It's been a few months since this video . . . how is the hauler holding up? I've seen a few people recommend keeping a spare bottle jack on hand just in case the first one fails. Any challenges with any of the components on the hauler? Thank you!

This is brilliant carrier. It probably not recommended to use for big bikes like my 500 because the fact that the whole bike is resting on the skid plate and that's aluminum, it will definitely break soon. Am I wrong?

nice video man!! cool how your family was hanging out with you!!

I bought one off ebay for $375 new shipped in a wooded crate..it was not avertized as MX hauler in the add but the paperwork in the box says it is..I run a lifted 99 Hoe on 35s so my bike is a dead lift to get it up on the platform but beats hauling a bike trailer on the camp trails..I do use a 2 inch ratchet strap on platform to bike frame as extra mental security but feel my Hondas CRF frame reinforcement areas around the foot rest are strong enough to hang the bike upside down from ..I just prefer being critical of securing for travel ..I will mention if you have a sloppy fitting receiver fitment the platform will move around and the bike will bounce from side to side ..in my case I had a stop strip welded to the MX hauler tongue to take up any end play after the receiver pin is set..that will vary from receiver hitch to receiver hitch brands... I also added remote lighting since the bike blocks half of my tail lights ..a LED stop light on the hauler platform that plugs into my hitch lighting so HWY patrol dosent hassle me ..

Nice video. Quick questions.....on the first cotter safety pin, shouldn't it go through the hole in the bolt (as opposed to the end)...? I would think through the hole. 2nd question, after the bottle-jack raises the bike to up position and the safety bolt is threaded inside, would you release some of the "pressure" on the bottle jack? TIA

Nice video. You skipped a step though. After tightening down the upper pin, you should release the bottle jack. This will rest the weight on the pin, locking it in as well as prolong the life of the bottle jack.

wonderful description! do you think there is an adater available to a ball tow bar??

Good video. Are those lowering links for your DRZ400? If so, how do they work and what size?

So awesome! ❤️

The safety cotter pin goes through the hole in that security bolt.

Where did you get the gas can carrier?

So nice. I knew you could do it With a car Jack. Perhaps you could lower the platform to make it easier to mount the bike on that platform. Greetings fron Honduras

Where did you get the gas tank holder attachment? I love that!

There is a pretty significant design flaw with the U-MX... The silver retaining strap that goes around the jack is very weak and stretchable. After a while, it will fatigue and fail on you. There is a similar system that uses a better jack clamp system that prevents the jack from twisting. Look at the Switch Hauler system. Also, you didn't properly install your kotter pin. It needs to go through the hole to lock properly.

Wow. I am a new follower of your channel Greetings from Sweden

Hello Paul, great review! Do you still have the carrier? I do have a few questions about dimensions, as this type of carrier is not available in my country, so I have to build one by myself...your help is highly appreciated.

They are great until they aren't. Super nice for use as a stand. However I have had a few and the welds kept breaking, the jack kept failing. Replacing the jack is easy but the welds made me too nervous. I gave it to a welder friend and it kept going for a while. Switched to moto tote a long time ago. No perfect solutions. Just keep an eye on the welds. They only break in the middle of nowhere!

Is there a risk of it breaking on the highway? I’ve got a 4Runner myself and my dad wants me to sell it for a truck but I really don’t want to so I am considering a carrier like this. I’ve just heard that they’re super sketchy on the highway and I’m wondering if anyone thinks they’ll really break longterm?

Nice video thanks a lot ! I'm thinking about getting as it's much more practical than a trailer. I'm just concerned about the car ? Do you think the chassis and suspensions of the car is capable of supporting 220+kg at the far bag end ?

Nice review. Sir I would to know can it use for a mini bike like KTM 50sx. Thank you very much!

Pretty chill

Please use washers. Look up the benefits if you'd like, but it makes everything last longer and if you tighten the bolt it will hold for longer even after rattling.

I really like it, very sturdy, price is a bit stiff, I would buy it though.

Pretty sweet!

Looks really cool but seems overcomplicated. You have to use wrenches a bottle jack etc. Just too much going on but great idea of the concept

Coukd i use this on a toyota camry?

super chill

I googled it but can’t find an in stock anywhere

Is it possible to use a hitch lock instead of the threaded pin? I feel like it would be easy to have it stolen while you're off riding out in the desert?

Thank you...Sir

How has this held up? Do you still like it? I’m thinking about doing the same thing on a Highlander.

OK mr. Washington, im on Vancouver island. Were could i buy one of thoses .great idea.. And buy a ktm bro.lol. Good vid

Does the tailgate open ok without the bike loaded? It looks like it might hit the gas can carrier.

another question: what is the reall differenc between this MX Hauler and the recommended Switch Hauler ?

Where did you buy the gas can holder? I just purchased this hauler today waiting for it to arrive now.

Could you use this for a smaller dirt bike?like a 150r

I like it 👌

Whats the tounge weight

thanks bud

I wish this would work with my KTM690....the weight specs in no problemat 350 but these don't have double down tubes so the bile would be on it's engine bottom.....aside from that I would NOT want to have to lift my bike onto that think! Hernia time! It should be designed to be lower than any MX bike dirt bike's skid plate then you could simply put vehicle in reverse and back the listing pad under the motorcycle easy peasy

Do the tires sit inline with the hitch opening? Trying to see if the bike sits higher or lower than a normal hitch hauler.

The foot pegs are strong but they arent so strong they wont break. I like the system but I would weld on extra spots to still strap from. A failure would be...... unacceptable.

Can you access the rear door of your SUV with the rack down at its lowest point?

So you have to use their pin.. what about a locking pin to keep someone from stealing the whole setup?

Man, I would not trust the connection point at the foot pegs, there needs to be more holding the bike to the base plate of the unit. Very novel design aside from that though. The steel plate structure is thick, looks like it's quarter inch plate and eighth inch in different areas. You gotta get rid of any moments of movement where possible in designs like this. I hope it serves you and others well.

What happens if jack breaks and ur at the track? Is there an alternative method to lift bike?

I'd rather see it set up with turning buckles instead of bolts and nuts like the rock and roll or ride and roll orange carrier system does same price to just looked on eBay for the one you are showing 750

where it could be reinforced for more load capacity?

What's the best way to carry an adventure motorcycle that's going to weigh close to 460 or 500 lbs?

Awesome baby photo bomb!!!

Cómo lo construyes? Podrías subir el vídeo?

You are supposed to use ratchet straps from the handle bars to the carrier plate under the motorcycle frame. No way I would travel even 1 block like this. In a sudden maneuver the back wheel of the bike could hit the road / ground, causing drivers behind you to panic. Totally unsafe.

The safety pin goes through the hole in the pin, not around it.

How does this differ from the motojackrack?

Are you in PA>? Im like 99% certain thats my old RM250 lol

Do yourself a favor and get a Switch Hauler instead. Very happy with what I have thrown at my Switch Hauler.

I was very nervous putting my brand new beach cruiser on this rack. kzfaq.infoUgkxG6JIgwJhur8_Rg8UeQ3EmePzi_wSncL8 But after reading many reviews I decided to get this one and take a chance. When arrived it was very simple to adjust and put together. I also added spike tape over the metal hooks before securing and tightening the straps, and no scratches. I also purchased the top bar made by the same company so that my cruiser sits straight on the rack without having to turn upside down. Extra bungee cords are used to secure the front wheel from flapping and even piece of mind knowing your bike is secure. Definitely recommend...

wash your windscreen with rain-x, you'll almost never use your wipers at speed when it rains

Best video because your Wife and Baby photo bomb your video, so cute. Now I have to watch the video over again. Cool bike rack, We need to get one.

Hey man where can I find a gas can holder like the one you have??

Good vid re how it works but what a complete pita. Way too many pieces to keep track of + needing tools. Hope that bottle jack never fails. IMHO, of course.

Can you do it in Sedan ?

I guess your hauler is fine, as long as you like riding by yourself.

Can I put a KLR650 on there?

the safety cotter pin goes through the hole

According to the website it does not work with a 2019 klx 250.

Can you use it on a small car?

Carrier works ok, but just like bicycle racks they cover your tail lights. Not a big fan...

What if u don't have foot pegs

So what happens if you crash and break a foot peg off?

Its been out of stock for over a year...anyone have a replacement of same style?

It would be great if the plate came all the way to the ground. Thank you

I'd love to have one, but can't justify that pricee tag.

I wouldn't like to have to lift my bike up on it.(300 lbs). And I don't think I'd trust using just the foot pegs to hold it on.

Check out rack and ride better setup but $595

Is it recommended for a moped?

That baba was going somewhere

you are happiest man on planet lovely child and mom

Onde posso comprar este equipamento

I like this and see no issues, except one. But it has to do with other people. If someone rear ends you it could total your bike depending on the impact. That’s one reason why truck or trailer is better, but other than the risk of people running into your bike I think these racks are great, especially if you don’t have anywhere to store a trailer and don’t have a pickup. This is the best one for a single bike by far!

Put the pin through the hole

That's not how you put a cotter pin in 😮

$449 when this video was made $559 in January 2023

No rutzkys on utube

DISCONTINUED probably from lawsuits

Nah mate ,be careful they snap mate honest be careful weld not strong enough 🍀

That is not the right way in inserting the safety pin of the rattle pin hehehe

Wrong installation of safety pin