Ultimate Welding Cart with Folding Table Extension

Рет қаралды 1,136,918

5 жыл бұрын

I make this welding cart to fit my Mastroweld MIG-250MI Multi purpose welder. I wanted also a small table where I can weld inside and outdoors. Due to my limited space, I wanted to combine them. It has adjustable feet on the table to allow for uneven ground and locking pins in the folding pieces for extra safety. All the ends of the tubing are closed up and ground down. It features a torch holder, cable hooks and a place for accessories and grinders. The table surface is sanded clean and covered with anti-splatter spray for easier cleanup. I'm not a welder by any means but i think it won't fall apart and if I always can weld it back together.
Thank you very much for watching!
Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!
If you like my videos support me on Patreon: / ollaris
Or tip me: www.paypal.me/OllariS
Visit my Website for more details: www.ollaris.tv
Subscribe for more videos: / ollaris
Twitter: / ollari_s
Instagram: / ollari.s
Music by Epidemic Sound (www.epidemicsound.com)

Пікірлер: 965

@Johan_Pentrose 4 жыл бұрын

Yeah very well done! I am going make one for my AHP 201xd. Love the design and the table is brilliant. Good work. I will have to watch the video over and over until i cam make custom plans for my welder. Cool new project

@BigPowerAL 3 жыл бұрын

Looking to build a cart for my new welder. This is a really great example of a well designed cart. Well done !

@rafaelromero742 4 жыл бұрын

Thank you for the idea! This is exactly what I need. I have no space currently at home for a big table and this would work perfectly for me.

@michaelarenal1578 5 жыл бұрын

That was a sweet welding table & great video. No talking...no crappy techno music...just the natural sound of welding fabrication. Thanks!

@Ollaris 5 жыл бұрын

Thank you very much! Glad you like it!

@Aardrijk1 5 жыл бұрын

Terrific design!! I have got to build one of these for exactly the reasons you did! I'll probably watch this 30 times. :)

@Ollaris 5 жыл бұрын

Thank you very much! Glad it inspires you to make one!

@amscout1156 4 жыл бұрын

What a great idea. The table would be great for cart I've got my powertig welder on.

@chybz 5 жыл бұрын

Nicely done Seb ! As always, very clever design, thank you !

@Ollaris 5 жыл бұрын

Thanks Remy!

@prabhupillai9386 4 жыл бұрын

Really a smart welder... Each and every bit of cutting and placing.. Excellent..

@billcarter1199 5 жыл бұрын

Very cool man I'm needing to build a welding cart for mine never thought of adding a table to it to awsome

@BrettL64 5 жыл бұрын

Nothing left but to say " Thanks for the idea. Your instructions methods tips and shortcuts are likewise much appreciated"

@Ollaris 5 жыл бұрын

Thanks a lot!

@johnkimani254 2 жыл бұрын

Lovely concept and gives courage to non-welders like myself to give it a try! Thanks!

@markust.8368 3 жыл бұрын

Now this is a brilliant idea and very nicely done! I will be doing this after I finish my saunaproject. Thanks for sharing this!! 🙏

@PurveyorOfCuriosities 5 жыл бұрын

Love this video! No stupid talking, no stupid music, no stupid opening, no stupid break taken to play with your pet or small talk passers by. Just good informative content. I appreciate this format so much. Side note: You should sell plans for that welding cart.

@Ollaris 5 жыл бұрын

Thanks! I take that in consideration!

@JDLarge 5 жыл бұрын

Such a smart design! You’ve given me some great ideas thanks for sharing!

@Ollaris 5 жыл бұрын

Thank you very much for watching!

@donvanco3078 5 жыл бұрын

There's something really satisfying watching metal get welded then ground smooth. Another nice and very functional build!

@Ollaris 5 жыл бұрын

I love it too! Thanks Don!

@davecross5317 2 жыл бұрын

nice build. I'm getting ideas from all over and you're take on a cart is a good one! Well done.

@mkbcoolman 5 жыл бұрын

I just picked up a new multi-process welder, and need to build a new cart. This is the perfect idea for my hobby shop. Having that folding extension is a brilliant idea. Nice work sir!!

@Ollaris 5 жыл бұрын

Thank you very much!

@myronjohnson8899 4 жыл бұрын

That is a cool cart. That would be a great addition to my everlast welder.

@sgsax 5 жыл бұрын

Great design! Compact, yet good storage and nice-sized work surface. Thanks for sharing!

@Ollaris 5 жыл бұрын

Thanks Seth!

@harduszandberg Жыл бұрын

This is such a great idea! I'm fabricating one right now! Thanx for the great videos, gives me inspiration and some helpful tips.

@JDLarge 5 жыл бұрын

Perfect! Love the space saving thought put into this. Having a space tight workshop I think this will be my next build. Currently I’ve converted a small shopping cart into a mobile stand but still have to roll it over to a table so this idea nails two birds with one stone! Thanks for sharing👍🏻 I’m sold and a new sub now😉

@Ollaris 5 жыл бұрын

Thank you very much Joe!

@JohnMadeit 5 жыл бұрын

great design. when i get into welding i will have to use some of these ideas.

@Ollaris 5 жыл бұрын

Thanks John!

@kylecagle4808 4 жыл бұрын

I watched this because the pop up table intrigued me. Excellent idea and excellent build on the cart entirely. I will be adding a pop up to my cart ASAP.

@Ollaris 4 жыл бұрын

Thanks Kyle!

@paddlepower888 3 ай бұрын

Beautiful. Thanks. Great folding table. Love the torch holder. One day, I'll grow up and attach a folding table to my cart.

@emoneyblue 5 жыл бұрын

Man probably the best build I've seen on youtube.. well thought out.

@Ollaris 5 жыл бұрын

Thank you very much!

@woodbineshark 5 жыл бұрын

thank you for sharing this great video, just picked up a mig and I'm looking for ideas on how to get setup in my shop, this is great nice work . M from Calgary Alberta Canada

@Ollaris 5 жыл бұрын

Thank you very much!

@jasonsherrill5291 4 жыл бұрын

Impressive craftsmanship!! You did a great job, I hope I can make one half as nice as this.

@samsue1224 2 жыл бұрын

Awesome work man I was just starting to plan this and thought “hmm, surely someone has already done this” You did not disappoint

@edson-leonfox7 5 жыл бұрын

Parabéns pelo trabalho feito, serve de referência para fazer uma dessa para nossas máquinas de solda, ficou muito boa!!!

@davidfrank2824 2 жыл бұрын

I have to say with no doubt that you have built the best welding cart that I have ever seen built on KZfaq. I love how you use that round stock and put it on for the handle with notching around stock to match the square stock. I have never seen anyone do that. So once I get the technique memorize I'm definitely claiming it for myself telling everybody I came up with that idea -) but seriously I don't even know how you came up with that idea for that cable to come out. I don't think there's a part of that cart that I don't love. I honestly think I'm going to give it a try over the winter since all my projects are normally done by then. I've been looking for something to do during the winter since I'm retired and I'm not going to go outside in the cold. I rather spend it in my garage working on something. I must definitely hit the subscribe button and the like button. I'm really looking forward to seeing more of your work.

@Ollaris 2 жыл бұрын

Thanks a lot I really appreciate it!

@doc1701 3 жыл бұрын

Great job - you made it look so easy. Thanks for taking the time to upload the video. All the best from Australia.

@tnyberg67 Жыл бұрын

Love the folding extention! Thanks for sharing.

@jaimeland9392 5 жыл бұрын

Que capricho!!!! Parabéns pelo projeto 👏👏👏👏👏

@edwardrodriguez6374 5 жыл бұрын

Muy buen trabajo un suscriptor mas. Like comparte las medidas

@jacobbleary4806 2 жыл бұрын

Wow! That's one hell of an idea and table/cart. Love it and have been trying to find good ideas about this build for my new welder and tanks. Thanks again for the straight and to the point video. Have a good one brother!

@Ollaris 2 жыл бұрын

Thanks a lot!

@davidvarney7353 2 жыл бұрын

Great design and exactly the plan I’m going to use for my own weld cart great job

@bryanm3433 2 жыл бұрын

This is amazing man. Thank you for sharing this with us. Just got a new welder myself, and been trying to figure out how I'd have space for a table, and this is the absolute perfect solution. Thank you!

@Ollaris 2 жыл бұрын

Glad you enjoyed it!

@user-jk8cy6xg3s 5 жыл бұрын

Very good stuff! I'll do this myself! Good luck to the author, and greetings from Russia!

@Ollaris 5 жыл бұрын

Thank you very much!

@reforzar 5 жыл бұрын

Dude! If I ever start welding I’m building this. Awesome idea. Calming video. Great work Seb.

@Ollaris 5 жыл бұрын

Thanks my friend!

@muddyfences5559 5 жыл бұрын

Fantastic design and build. That flip out table is sweet.

@saloram990 5 жыл бұрын

so far coolest welding cart I ever see

@Ollaris 5 жыл бұрын

Thank you very much!

@MCsCreations 5 жыл бұрын

Brilliant work, dude! Really nice! 😀

@Ollaris 5 жыл бұрын

Thanks man!

@christofix 5 жыл бұрын

This is a wonderful project. It brings me ideas to do this with my own welding machine. Just brilliant how you use the folding table in the cart. In this way, this takes up little space to store and you always have everything, wherever you go. I'll keep following you, I'm a fan!!!

@Ollaris 5 жыл бұрын

Thanks a lot Christofix!

@FooTech1976 5 жыл бұрын

WOW man that is fantastic! Great job, and thank you for taking the time to film and share!

@Ollaris 5 жыл бұрын

Thank you very much for watching!

@DiesInEveryFilm 5 жыл бұрын

Awesome work Sebastian love the fold out table design 👍🏼👍🏼👍🏼

@Ollaris 5 жыл бұрын

Thank you, brother!

@danielecerone7536 3 жыл бұрын

0u7yj

@StudioJLT 5 жыл бұрын

Sweet cart! I don’t even weld and I want to make this.

@Ollaris 5 жыл бұрын

Thanks! Perfect, time to get started! ;-)

@Jennifer-mt5cx 4 жыл бұрын

trash if you dont nowe how to welding

@mikefinley4367 2 жыл бұрын

Awesome build ! When using a chop saw cutting long lengths, block support your piece at the distant end. Not sure if you have ever had a issue without doing so but it's done in carpentry and long length of plumbing pvc drain pipe for best accuracy cuts.

@jeremyspecce 5 жыл бұрын

Very creative, love the folding table. I used to keep my gloves flat on the bottom of my cart and then I found a mouse had moved into them. 🙀 now I clip them onto the side of the cart with the ground clamp!

@Ollaris 5 жыл бұрын

Thank you very much! Good idea!Haha! You didn’t use them very often huh?

@andrericardoantunes5752 5 жыл бұрын

Muito bom! Parabéns!

@luisrobertosilva1606 5 жыл бұрын

Parabéns brother, vou copiar seu projeto.

@FavaretoSE 4 жыл бұрын

Hehe eu também !

@TK-qx9mc 5 жыл бұрын

Wow, this is so great. You are a genius. I just took my first welding course and this will be a good project. Many thanks.

@Ollaris 5 жыл бұрын

Thanks a lot!

@hea5843 4 жыл бұрын

Waw! Great design! Very inspiring! Thank you!

@SharpAndCunning 4 жыл бұрын

Do you offer a set of plans that I can follow to make this? This looks like the perfect table for me

@user-dc1qp2hh6n 4 жыл бұрын

Creator, greetings from Russia. Health to you.

@nloggraficas 4 жыл бұрын

I love this welding cart plus table, great idea!!! Most perfect idea i do watch here is you tube, the only thing I would suggest to change its the position of the table respecting to the wire feed hatch door, if the wire feed door was at the right side of the machine wouldn’t have any difficulty to change the wire rolls but it will be under the table so you have to change the roll underneath the table or taking out the machine off the table in order to change the wire easily.... anything else it’s perfect i will keep it in mind, thans for sharing 👍🏼😎🇵🇷

@ivankal1191 5 жыл бұрын

Excellent work! Tomorrow I start to make my version inspired by your solution - enabling both welding and woodworking.

@Ollaris 5 жыл бұрын

Thank you very much! Great, have fun and stay safe!

@marciosantana9879 5 жыл бұрын

Amigo gostaria de saber as medidas usadas na construção. .

@davidemanuelspengler1803 5 жыл бұрын

Alguien le de al muchacho una cerveza... Bien se lo a ganado... 😀👍

@darkstatmat4891 4 жыл бұрын

es mas facil con hilo ?? porque no uso 6013??

@leemccorriston2170 5 жыл бұрын

I say it once and I'll say it again this man has some great project's I love all his videos brillant.

@Ollaris 5 жыл бұрын

Thank you very much Lee!

@gthmcty111 5 жыл бұрын

Looks great Sebastian!! I love the planters you added as well!!! Great video man!!

@Ollaris 5 жыл бұрын

Thank you! Ha! Yeah, I convinced my better ¾ do put some up!

@Tiersmoke92555 5 жыл бұрын

Tip- put the spot on the inner edges and it gets easier to square the frame.

@Ollaris 5 жыл бұрын

Thanks! I remember it for the next time!

@franciscowashington2155 5 жыл бұрын

Muito bem legal

@sir_pig2110 5 жыл бұрын

The folding table made me shook, really awesome cart dude👍

@Ollaris 5 жыл бұрын

Thank you very much!

@nvlvdave 5 жыл бұрын

Outstanding design and build. Great Job!!!

@BradHedges 5 жыл бұрын

Excellent craftsmanship! Nice design, looks very practical. Well done!

@Ollaris 5 жыл бұрын

Thanks Brad!

@johndude70 2 жыл бұрын

love the compact space saving design.

@danielsjack9018 4 жыл бұрын

Mister Ollarís: Cart with folding is VERY GOOD, congratuletion. Atte. D J.

@datalaforge 5 жыл бұрын

That cart is absolutely glorious! It's also nice to see that the wall is holding up too :) Richtig toll!

@Ollaris 5 жыл бұрын

Thank you very much!

@FreshAnton Жыл бұрын

That Table Idea is SICK.

@snoopu2601 5 жыл бұрын

Thank you for sharing I'm in a wheelchair and I want to make a welding table but not to big just looking at many video's to see what kind I'm going to make. By far the best one I seen yet for me.

@Ollaris 5 жыл бұрын

Thank you very much. It might be not ideal for you in this particular hight and weight. It’s pretty heavy but i think you could alter the design to make it a bit lower and maybe with a smaller bottle. I think you could use the space underneath to get closer with your wheelchair. And im sure you could fold out the table part if you make it a bit lighter as well.

@snoopu2601 5 жыл бұрын

@@Ollaris thank you yes I was thinking the same thing I'll just get smaller square tubing and make it to my hight 32-34" . I have done many drawings of just the table I like the set up for the welder your right I probably won't have the bottles but I will make a spot for them just in case. I'll find some good casters for the table. There is a store in Berkeley California just for industrial casters they have all types of wheels. I have a place for the table but if I need to move it to a diffrent location I want to be able to move it. I see other people making welding table but they need a Crain to move them. I don't want my welding table like that. I know what you mean about the small table being heavy. It's like my GMC Suburban tail gate it is very heavy to lift even the back door over the tail gate with the window very heavy to lift I couldn't lift it because I was sitting to low.

@Willeexd1337 5 жыл бұрын

One of the best welding carts ive seen!

@Ollaris 5 жыл бұрын

Thank you very much!

@CocaineYT 4 жыл бұрын

The best welding cart in KZfaq, Greetings from Poland :)

@michaelvoronov5716 4 жыл бұрын

Good job, man. I will take note of the mechanism of transformation.

@aaronwillett820 4 жыл бұрын

Nicely done! Well thought out.

@billy19461 5 жыл бұрын

GREAT JOB!!!! From a retired welder.

@Ollaris 5 жыл бұрын

Thank you very much! That is really nice to hear from a pro!

@romildocaetano1739 5 жыл бұрын

Quando pensamos que já vimos de tudo aí vem você e faz esta marilha de mesa (bancada) multifuncional. Parabéns pelo projeto.

@STohme 3 жыл бұрын

Very nice project with interesting design. Congratulations and thanks.

@DavidPlass 5 жыл бұрын

That. Is. AWESOME. My first welding cart was too bulky and I have no room in my garage for a table so I was thinking about making a table/cart combo but never could figure out the mechanism. I may have to rebuild mine using your ideas!

@Ollaris 5 жыл бұрын

Thanks!

@IIISpeeder 4 жыл бұрын

love this concept and idea. Thank you very much for the idea. The cart looks very good

@Ollaris 4 жыл бұрын

Thanks for watching! Glad you like it!

@walterforsiethe2567 5 жыл бұрын

I love your idea for the table extensions. I don't have much space either and that design would be great for my everlast welder.

@Ollaris 5 жыл бұрын

Thanks Walter!

@charlesstarkey5256 5 жыл бұрын

A very very clever design well executed Sir! I tip my hat to you.

@Ollaris 5 жыл бұрын

Thank you very much Charles!

@ArvizuDesignFab Жыл бұрын

Awesome design. I will try to build one similar! thank you!

@jaldemirbatista7603 4 жыл бұрын

Fantástico, que bancada funcional! Parabéns!

@MnktoDave 5 жыл бұрын

I like your design for that fold down wing. It's flat, quick to set up and take down, has adjustable feet, and takes little to no storage space. All the best features for a good quality, portable welding table. Nice! I built my table with slide out wings for both sides, but they don't store with the table, and they take a little more room to store.

@Ollaris 5 жыл бұрын

Thank you very much! It’s a bit heavier than i would like to roll around when working outdoors. I might downgrade to a smaller tank though.

@MnktoDave 5 жыл бұрын

@@Ollaris Yes, I completely understand what you say about the weight! My main table is 39" X 48" (w/o ext) and very heavy to move around, even with good castors. Each extension gives me another 3' on both sides (totaling 10' in overall length for large jobs) but adds a lot more weight. That was why I decided to make them slide out instead of folding, but I really do like the compact folding design of yours. Since it's such a beast to push around, I also made a 2' X 3' top (1/4" thick) that quickly fastens to my Harbor Freight 1,000 lb lift table, and that's often what I use for smaller jobs. It works great, moves around easily, I can set the table at any height I want, and when I'm done I just remove the top and store it out of the way on my lumber cart. I find myself using this one way more than I ever thought I would because it's so handy, and if I'm working on a taller project, I just drop the table and it makes everything so much easier to reach. I'm looking forward to seeing what you build with your new anvil and table.

@jbravo70 5 жыл бұрын

You should sell these. Best one I seen so far.

@bobbarrett4492 4 жыл бұрын

Very nice! I may try my hand at this. Just started welding and it looks like a good and useful project.

@Ollaris 4 жыл бұрын

Thanks!

@alfredodokaj7177 5 жыл бұрын

That is what is called smart craftsmanship Thank you for sharing

@Ollaris 5 жыл бұрын

Thank you very much Alfredo!

@BrothersMake 5 жыл бұрын

So cool Sebastian! Wish we had space for a welder. Top of my list if/when we get to upgrade our workshop space!

@Ollaris 5 жыл бұрын

Thanks! I'm sure you both would love it!

@KsSwordKing 4 жыл бұрын

Hi. I inspire from your project and now i start to build a welding cart for myself. Cheers from Romania.

@Ollaris 4 жыл бұрын

Thank you very much! Greetings from Hungary.

@vanderleiwandeur4833 5 жыл бұрын

ADOREI ESSE PROJETO ....CONGRATULATIONS!!

@tomfull6637 3 жыл бұрын

Great compact mobile weld bench solution! 👍🏻

@johnenriquez7993 5 жыл бұрын

What a true craftsman. I wish I had half that skill.

@Ollaris 5 жыл бұрын

Thank you very much!

@christopherdubour6662 5 жыл бұрын

That’s a pretty awesome track saw hack! Thanks for the tip!

@christopherdubour6662 5 жыл бұрын

Tips and tricks aside, great design and execution. (Now that i’ve finished watching)

@Ollaris 5 жыл бұрын

Thanks Chris! Yeah, I had doubts how well the hardboard holds while cutting metal, but it got barely warm.

@indoremechanics 4 жыл бұрын

simple and best weld table. This type of things Inspires me most. Great job

@Ollaris 4 жыл бұрын

Thanks!

@ShopNation 5 жыл бұрын

Awesome cart design! Just may have to leverage a couple of ideas when I make mine. Good work!

@Ollaris 5 жыл бұрын

Thank you very much!

@TheJaylen94 3 жыл бұрын

What a nice build ... I Love it... You Made a really nice Job ..

@panick.attack 3 жыл бұрын

Wow, great build!

@Zdunchyk 5 жыл бұрын

Dla mnie kozak. Świetnie wymyśliłeś z tum rozkładanym stołem. Podoba mi się.

@karolmotala 4 жыл бұрын

Very cool! I might "steal" your ideas when I will be making a welding cart for myself :)

@Ollaris 4 жыл бұрын

Please do!