375 CheyTac ELR Rifle Build Start to Finish

Рет қаралды 154,083

Ай бұрын

Full Story: ultimatereloader.com/xcrq
UR on RUMBLE: rumble.com/ultimatereloader
UR on Patreon: / ultimatereloader
My Incredible Hulk .50 BMG rifle set me on the ELR path. I knew right away this was only an entry point and that I’d want a more serious ELR rifle - enter .375 CheyTac. This build is designed for ELR competition, something I’m looking forward to learning under the mentorship of King of 1 Mile and King of 2 Mile Paul Phillips! (His friend and fellow King of 1 Mile, Clay Rhoden, will also be assisting.)
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this KZfaq channel (gavintoobe).
Any reloading data supplied on this KZfaq channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this KZfaq channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this KZfaq channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Bat Machine
- Precision Matthews
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereloader.com/about

Пікірлер: 265

@oldschooljack3479 Ай бұрын

The most difficult part about shooting 2 miles is finding a place to shoot 2 miles.

@RubiconBear 21 күн бұрын

99% of ELR Shooters don't have a practice range to shoot that far, so sign up for any of the ELRSO, Raton thunder or spearpoint matches to get the opportunity while competing with fellow shooters

@fallencrow6718 15 күн бұрын

@@RubiconBear Or befriend a farmer.

@Duck95ish Ай бұрын

We challenge you to the Texas Plinking 1 MOA At 1,000 Yards Challenge!

@ModernWelfare9 Ай бұрын

That would be cool

@bokiNYC Ай бұрын

That would be awesome to see, please do it! 👍

@eamonia Ай бұрын

Watch, he goes out there and totally bombs. 😆

@geekswithfeet9137 Ай бұрын

Should invite Overton…. Let’s see if he can do it outside of an editing suite 😂

@RubiconBear 21 күн бұрын

375 really isn't meant to be a 1000 yard gun, it's hard to see potential misses at that short a distance to make corrections

@RonSpomerOutdoors Ай бұрын

Beautifully done and shown, sir.

@Ultimatereloader Ай бұрын

Thanks Ron!!!

@Blue-cq2hl Ай бұрын

Always find it fascinating not just with the reloading stuff but machining and making these things to accomplish this stuff.

@WrenchHead Ай бұрын

Slow down 😂 ....still working on 1,000YDS, haha.

@Ultimatereloader Ай бұрын

😂

@alexandernachenkin263 Ай бұрын

👍👍👍1000 - 1400 yards is indeed a doable but difficult distance to hit on the first shot. Good Luck!

@robinepps7274 Ай бұрын

@alexandernachenkin263 my friend Chris Schmidt has the cold bore world record of 2874 yards! (Cold bore with 2 follow up shots, within 3 minutes)

@alexandernachenkin263 Ай бұрын

@@robinepps7274 👍 What rifle, what cartridge? What can I find this World record?

@chrismuncey3861 Ай бұрын

It surprisingly easy I got 1,000yrd a few months back. Before that 300yrd was the most I had shot. Don't over think it I built a very expensive rifle just for 1,000yrd and 1 mile. But I was surprised my 5.56 bolt rifle with a 4-16x50 scope was more than enough for 1,000yrd. And it was 1/5 the $. I intend to try for 1 mile this fall with the more expensive and powerful rifle I built.

@davidhill1374 Ай бұрын

Awesome! Your talent & skill set amaze me... Thank you for your content and support of the 2A community.

@Ultimatereloader Ай бұрын

Thank you! Cheers!

@francoisdavel1786 Ай бұрын

Accutac bipod with sled feet + adjustable bag rider is the way to go. All you need now is a piece of plywood with a carpet on for that bipod to ride on. It makes a HUGE difference.

@chrismckoy3533 Ай бұрын

Be great to see some statistically significant groups. Great build! Going down the deep ELR rabbit hole.

@coreystock5361 Ай бұрын

Over the top. Absolutely amazing.

@rangetime6779 Ай бұрын

Amazing build and results, can't wait to see long range.

@hornady6.5 Ай бұрын

What a dream rifle, nicely done mate.

@peripheralterror Ай бұрын

Absolutely beautiful build!

@C_oprator89 Ай бұрын

What an amazing video. Seriously what an experience just watching this

@IMPACTSHOOTING Ай бұрын

Badass build!

@Ultimatereloader Ай бұрын

Thanks Buddy!

@rogerculver4511 Ай бұрын

Loved this. Keep it coming.

@DoonAssassin Ай бұрын

Beautiful rifle, and an amazing video, well done, I enjoyed every minute.

@bravo9890 Ай бұрын

The first 2 groups I was like uhhhhh?.?. Then after you adjusted the seat depth I was like" there it is, all touching. 👏

@eggbert191 Ай бұрын

Lol meanwhile Mark and Sam After-work are shooting out to 3000 with a 308 Winchester

@HJPreen Ай бұрын

yes but it takes 20-30 shots for a hit.

@MikhaelWest Ай бұрын

@@HJPreen "A hit! A fine hit!" - Treebeard

@Unique377 Ай бұрын

Nothing but luck no science

@eggbert191 Ай бұрын

@@Unique377 lol show us a video of you doing it. You clearly don't watch or understand the videos

@Unique377 Ай бұрын

@@eggbert191 Been reloading and shooting for over 20 years so please tell me what I don’t understand? I simply said it’s nothing but luck and is comparable to standing at the far end of a basketball court and throwing the ball at the rim until you sink a basket. Do you believe military snipers take shots at those distances? Every shot I have seen was under 800 yards.

@rmp5s Ай бұрын

It's rare that I see something that's actually totally new, but this vid is full of stuff. This is friggin amazing. Subbed!! I wanna learn more!!

@lupooutdoors Ай бұрын

What a fantastic video! This year we are doing a quest to 1 Mile video series and this was inspirational!

@Ultimatereloader Ай бұрын

Thank you and good luck with the 1 mile shooting :)

@jonb7274 Ай бұрын

Fabulous content - you are the master!

@conservativesniperhunter7439 Ай бұрын

Another awesome rifle build by Gavin 😄👍. The 2 mile challenge is going to be fun to watch.

@joshuathrasher2056 Ай бұрын

I’ve been trying out a Zeiss LRP S3 4-25 on a 6ARC gas gun. I have it in a 20 moa NF mount. From my zero stop I have 34.7 mils of usable elevation. I don’t know how much magnification people generally use on ELR rifles but I was blown away by the amount of elevation that thing has.

@jamessammann9183 Ай бұрын

Can't wait gavin

@Big222Dog Ай бұрын

Great looking rifle. I really appreciated seeing all the process of making it. Do that again in future.

@Ultimatereloader Ай бұрын

Thank you for watching! Yes, lots more of these kinds of builds planned...

@hotchihuahua1546 Ай бұрын

Always fascinating and fun to watch y’all build a rifle to shoot accurately ! 👍

@Ultimatereloader Ай бұрын

Thanks for watching!

@4headshooter Ай бұрын

Gday from Oz. Great video, I enjoyed watching your build

@PewDieMilk Ай бұрын

Unbelievable workmanship 🤟🏽🔥🔥

@greasydot Ай бұрын

What an awesome build. Cool paint scheme. I am entertaining the thought of learning how to cerakote.

@ICU2B4UDO 15 күн бұрын

That rifle IS Dialed in!! 3 shots with a .375 Cheytac and you make 1 🕳 is freakin' amazing!!

@qh4007 8 күн бұрын

FN, incredible project!!! +10

@OFFICIALUND Ай бұрын

In the words of William Shakespeare, "3 shots a group does not make."

@pulldeauxduck2480 Ай бұрын

It’s alive !!👍

@chrisshumake83 Ай бұрын

Nice work 👍 👍

@ibrahim10910 Ай бұрын

Very good post.

@corytimm3136 Ай бұрын

And im proud of my 400yd ish gopher hits with my 243... wonderful video!

@ShoresyLK69 Ай бұрын

thinking how far that really is its insane!

@mrobinson9297 6 күн бұрын

thats awesome.

@jamesclark4 Ай бұрын

Awesome content my guy keep up the great work 👍 from canada 🇨🇦

@Ultimatereloader Ай бұрын

Thanks! Will do! Appreciate you tuning in from "Up North" :)

@user-TJ365 Ай бұрын

I use Peterson brass for my 7 PRC. It is very consistent and has held up well to multiple reloads.

@OregonBladez Ай бұрын

Amazing build, very jealous!

@Ultimatereloader Ай бұрын

Thank you for watching!

@OregonBladez Ай бұрын

@@Ultimatereloader Thank you for sharing your amazing build. I'm in awe of what appeared to be very little recoil on a rifle capable of a 2 mile shot. The color choice was perfect, I want something similar on my RPR.

@nathandawley3909 Ай бұрын

that gun's definitely on my grail gun list

@nathenfarmer5625 Ай бұрын

Very nice work

@Ultimatereloader Ай бұрын

Thank you, it was a lot of work, very happy with how it turned out!

@Longrangelefty Ай бұрын

Getting that cheek piece on will help tighten up that group too

@d0rrell 16 күн бұрын

Problem is there would be no room for the bolt!

@Longrangelefty 15 күн бұрын

@@d0rrell i run that chassis on my 375ct and it is made so the bolt clears under the cheek piece

@akathecanadian Ай бұрын

I’m have a family friend that was a sniper for a special forces team way back in early 00’s. Shooting to those ranges is difficult but once you get it, he said it’s a liberating feeling knowing you can hit targets at those ranges. Good luck I’m going to keep trying for 700 😂

@stevemiller6547 Ай бұрын

So awesome! True craftsmanship lives on in the USA!

@christiansmith9414 Ай бұрын

Tremendous!!

@trentsnaza3372 Ай бұрын

Holy crap!!!! I wish I had your bank roll!!!! Hell I'd build all kinds of rifles too! 😂

@ronmor8237 Ай бұрын

Crazy how you do all that!! Awesome!!! I was always curious how they do the twist inside the barrels....

@glockparaastra Ай бұрын

So cool!

@Ultimatereloader Ай бұрын

Thank you!!!

@BigTimberLodge Ай бұрын

I love King of 2-Mile.

@hunteranglin3750 Ай бұрын

You could use some swivels for fishing on your spraying rack that way you can turn the part 360 without having to take it off the rack and turn it

@RivinaR Ай бұрын

Would love to see you do a collaboration with MarkandSam afterwork channel on this topic.

@kellyrick4365 Ай бұрын

Damn nice rifle :)

@Ultimatereloader Ай бұрын

Thank you!!!

@TheFdgsgf Ай бұрын

I envy your tools and knowledge.

@OneCanisLupus Ай бұрын

😂😅😅😂

@p47rr Ай бұрын

The break is amazing. I have a Sabatti Rover Tactical in 300 Winchester Magnum. Barrel is huge in diameter. Unfortunately from the factory it has a non threaded muzzle. Had a local gunsmith thread the barrel. Ordered the same break made for a 308 diameter bullet. Recoil is like a 243 Winchester now.

@Moraprecisionreloader Ай бұрын

Gavin you ain't holding back on this one.

@user-gd8tr5gu8d Ай бұрын

Hallo nice gun and Video

@raywhitehead730 Ай бұрын

At this point, maybe a drone would be better. What do you think?

@philipejeuceoututkache Ай бұрын

375ct is definitively an amazing bullet and for sure the best for ELR. I don't even know if there's and ammo with better ballistic coefficient for that distance.

@jakeMTSU Ай бұрын

I have hit a 8x4 target at 2 miles with a 338 lapua, but it was tough lol

@duggydo Ай бұрын

Looking good. Definitely need to engineer yourself a good cheek rest though and it will be a laser accurate shooter Gavin.

@Mountain_Paladin Ай бұрын

So you made the Lightning Bolt of Zeus .... That is the tool of the God's. Wow very impressive 🤙

@kevinschneider1820 26 күн бұрын

I've done 2800 yards and the prep work for that was an absolute nightmare

@hotmetal459 Ай бұрын

I’d better see you at Spearpoint Ranch with that beast!

@tvvxq_9158 Ай бұрын

Just recently hit 1.2 miles (2100 yds) with my 300 wm. Crazy the equipment you need for 2 miles+

@magi5587 12 күн бұрын

Nice, what was your set up?

@eggbert191 Ай бұрын

You need a cherk riser. Your head is bobbing all over the place

@bokiNYC Ай бұрын

Great video, awesome rifle, it was a pleasure watching. Can you please take on the Texas Plinking 1000 yard challenge with this rifle once you are all dialed in - that would be amazing to watch. 👍

@chrismuncey3861 Ай бұрын

I've been looking at that same action and barrel for a 375!!!. I want a Cerus F class stock.

@kentuckywindage222 Ай бұрын

Hulk SMASHhhh!!!

@ecleveland1 Ай бұрын

I would put a check rest on the stock. Your head kept repositioning between shots.

@peterschmidt2849 Ай бұрын

That’s a poke ❤

@bluegunshooter9823 Ай бұрын

Hey Mister! Where do you currently get Peterson brass in 375 CheyTac?..... Love this project!

@johnfowler4264 Ай бұрын

Hello! Have been watching your videos with interest and finally subbed. I’m working on a .375 XC build now and am hoping you can provide some information on the O.D. Profile of your barrel. I’m also starting with a Bartlein (similar headstamp data too) of 1.350 x 35 (blank). This is incredibly nose-heavy. Thanks, John

@philippedomon5178 Ай бұрын

Don't forget the ears protect😂 you know what ? I'm french and every day I would like to be American 😢, great job man

@lynnkramer1211 Ай бұрын

Not fun being an American at the present time. We are humiliated on a daily basis by our President. It is karma from when the French delayed bombing Muammar Kaddafi by Reagan in the 70s. Our degradation is excruciating. Worse than being called a Frog Eating Surrender Monkey.

@chadjones7722 Ай бұрын

clean

@TexasTrained Ай бұрын

Paul and Clay are both fine guys that Ive shot with.

@joelobryan1212 Ай бұрын

really would be interested in you giving us the measured MVs with that barrel length.

@freeandfighting3069 Ай бұрын

Very impressive; I want one! FREE

@ishnifusmeadle Ай бұрын

And here I am trying to scrape enough together for a freakin 1k.....which being honest is pushing it in my area....most areas only offer 500yd safe shots with a few 1ks around

@ruststar Ай бұрын

Put a tarp or blanket under the muzzle so you don’t get so much flying debris

@avocadoarms358 Ай бұрын

Anyone else in the comments looking for people like “iv done this with a 22. Off my back porch” comments

@me2ontube Ай бұрын

Have you tried any outta the box ready-made 375 chey tac like victrix

@otiscarlwhite8745 Ай бұрын

Surprised Paul didn't guide you toward a Bix-n-Andy trigger

@Decki777 Ай бұрын

TacomHQ structured is pretty interesting .

@michaelvstheworld3680 17 күн бұрын

When are you going to try a structured barrel?

@snteevveetns Ай бұрын

Why not bed the pic rail to the action? Take any possible wobble out there too?

@lynnkramer1211 Ай бұрын

You guys are catching up to your elders by now. My rock chuck club has been competitions to shoot rock chucks across 3 and 5 mile wide canyons of the Snake River west of Twin Falls, Idaho. The club is 45 years old and going strong. Glad to see you young guys learning to appreciate this sport.

@ragnarok5056 Ай бұрын

What kind of twist did you run, and also muzzle velocity with the 400gr

@HowManyLegsItHas Ай бұрын

Do you think you would retain the accuracy going with a stock that was magazine fed, whilst still hand feeding (basically just giving the option to magazine feed if a guy chose)?

@BryanShull-lt8gz Ай бұрын

I would also go with a 40 degree shoulder, no sense letting Ackley have all the fun😂😂😂.

@johnbishop1911 Ай бұрын

Have you thought about using Barrett extended range scope rings? You gain 40 moa.

@ralphjones7240 16 күн бұрын

What was your barrel cleaning interval for the first three groups

@DJG_Official Ай бұрын

@UltimateReloader how much did your build cost start to finish not taking into account machine cost ?

@gtroxlar8597 Ай бұрын

What brand reloading dies for that 375 Cheytac, where can i get some?

@andreytodorov843 Ай бұрын

Hi, question. What is the final price without the scope? Just the rifle. Thank you

@Triggertarzan Ай бұрын

I’m an automotive painter and airbrush artist on cars bikes and anything that can be scuffed can be sprayed. When I met creakier at SEMA in 2018 those guys showed me some baggers they did exhaust fenders tanks heads and stuff on with their air cure formula. Have you tried any of their new pearl chameleon color changing effects pack yet? I’m debating on if I wanna spend the money on something that will model real bad or something I’ll have to cross stitch and coat multiple times to lay and not have a nasty flop light side effect.

@earlroach7672 Ай бұрын

Bud, I'm curious what your idea is for rumble and KZfaq? I downloaded rumble just for your show. I'm not seeing the "lack of interference " your talking about