Ultimation Modeling Tools

Рет қаралды 45,379

2 жыл бұрын

#olhabatchvarov #shipmodeling
💡All videos about the WORKSHOP&EQUIPMENT in the PLAYLIST:
• Perfect WORKSHOР
🎞KZfaq canal of the Ultimation Modeling Tools:
/ @ultimationmodelingtoo...
⚓️Official website of Ultimation Modeling Tools:
ultimation.ca
⚓️Sander:
ultimation.ca/collections/all...
⚓️Repeater - Sander Add-On Tool:
ultimation.ca/collections/all...
⚓️Slicer:
ultimation.ca/collections/all...
⚓️Sander, Repeater & Slicer Package:
ultimation.ca/collections/all...
🎞You can find all my built models in this PLAYLIST:
• Full build-logs with m...
🔴Channel's main page:
/ olhabatchvarov
🔔Subscribe to the channel - not to miss any issue:
/ @olhabatchvarov
💰You can thank me for filming and editing this video in the form of "LIKES", clicking the "THANKS" button under the video or become a member of the channel here:
/ @olhabatchvarov
🔥Official channel website:
www.shipphotographer.com/
📨Contact me:
www.shipphotographer.com/zvor...
⛵️GALLERY of my models:
www.shipphotographer.com/galery
#workshop #shipmodelbuilding #modelismonaval

Пікірлер: 145

@OlhaBatchvarov 2 жыл бұрын

🔥This video has subtitles that you can translate into any language🔥 🔥Це відео має субтитри, які можна перекласти будь-якою мовою🔥

@MicrobyteAlan 2 жыл бұрын

This takes modeling to a new level.

@allenlawton6581 Жыл бұрын

I have been using both of these for some time now. They are wonderful tools. Not cheap but well worth the cost.

@OlhaBatchvarov Жыл бұрын

Precisely! Absolutely agree with you!

@type2280303 2 жыл бұрын

Those are really interesting tools Olha ! Thanks for the presentation. Really like the idea of the sander, easy if you do not have a specific room for modeling indeed.

@OlhaBatchvarov 2 жыл бұрын

Thanks you! Sander became a permanent resident of my desk)))

@S_MannMann 2 жыл бұрын

THANKS! Your Product & Book Reviews are INTERESTING & HELPFUL!!!

@OlhaBatchvarov 2 жыл бұрын

Glad it was helpful!

@xKmotx 2 жыл бұрын

I love tools, and the way you presented these was just amazing!

@OlhaBatchvarov 2 жыл бұрын

Thank you very much!

@danielroncaioli6882 2 жыл бұрын

That chopper looks fantastic. Nice long handle for leverage.

@OlhaBatchvarov 2 жыл бұрын

And the perfect cut!

@davewar9098 2 жыл бұрын

I have the sander. It gets a fair share of use and replacing the sanding discs for different grit is not difficult. You can buy the sand paper at most hardware stores. I like it and it has held up very well. I like that it is small and portable, and, can be used for any number of projects and hobbies. Thanks! Have a great weekend!

@OlhaBatchvarov 2 жыл бұрын

Thanks for sharing

@alpro-ru 9 ай бұрын

отличный инструмент! поздравляю с приобретением!

@robertsalanon2909 2 жыл бұрын

Super materiel pour les petites mains d·Olha !! bravo ...

@OlhaBatchvarov 2 жыл бұрын

Obrigada!

@heathstephenson3863 Жыл бұрын

Love the tools and the equipment that you work with Olha.

@OlhaBatchvarov Жыл бұрын

Thank you!

@heathstephenson3863 Жыл бұрын

@@OlhaBatchvarov ❤️

@davidfeinberg5599 Жыл бұрын

I purchased these right after the holidays. The quality and precision of these tools are excellent ! I mounted mine to 9x9x1 inch wooden squares for stability and ease of use. Al Collins makes a truly wonderful product and is a delightful man who loves modeling. Great recommendation !!!

@OlhaBatchvarov Жыл бұрын

Yes, these have become my favorite tools now. Al is also preparing a new surprise - it will be another new tool - I can't wait to find out what's in there...

@richardclowes6123 Жыл бұрын

What a splendid array of tools. Just the job for small items when you don't want to kick out lots of dust from power tools. The only tool I didn't see was a rip/cross saw for longer cuts. I imagine it's great for model shipbuilding etc.

@OlhaBatchvarov Жыл бұрын

Thank you very much! Indeed it is! These are now my favorite tools!

@denisv4385 2 жыл бұрын

I went to their website after seeing the images of these tools in your video at the May 6 exhibition. The slicer is very interesting for my needs and seems very robust. I appreciate the fact that you can change the cutting mat once everything is scratched. To be used for its specific purpose. Your video convinced me... Sold!!! ))))

@OlhaBatchvarov 2 жыл бұрын

Yes, these tools are very reliable. All parts are metal and perfectly fit - the design is very strong. But I was more surprised by the sender. It is just perfect))) Although the slicer will now make my life much easier! By the way, one of the two partners of this company designed the scroll saw Dewalt DW788, so I'm not surprised by the reliability of these Ultimation modeling tools...

@kroumbatchvarov7671 2 жыл бұрын

@@OlhaBatchvarov The sander is nice, yes.

@denisv4385 2 жыл бұрын

@@OlhaBatchvarov I don't know if the manufacturer is Canadian but I already received my slicer after only 2 days. It is as I wanted, heavy, robust and efficient with extra cutting pads and blades. I recommend it too!!

@OlhaBatchvarov 2 жыл бұрын

Yes, this is a Canadian manufacturer. I have already tried this slicer on hardwood such as castello boxwood and pear. The result is impressive, even this wood that has the feature of stabbing, under this slicer blade has a perfect cut...

@colinnapier6662 2 жыл бұрын

Really interesting tools, great demonstration of their abilities.

@OlhaBatchvarov 2 жыл бұрын

Thank you!

@timothyfrost6543 2 жыл бұрын

Really useful info as always I think a really popular video from you would be how you organise your workbench and tools. I’m sure that I’m not the only one who seems incapable of organising my workspace efficiently and it can get in the way of modelling when you can’t find anything! x

@OlhaBatchvarov 2 жыл бұрын

The only way to find everything is to empty the table at least once a week. I completely empty my table and put the tools in their places on the shelves. And so every time I have on the table only the tool that I need at each stage of work.

@timothyfrost6543 2 жыл бұрын

Simple great advice…… once a week from now on….. I promise!

@B747-4OO 2 жыл бұрын

Thx for this tool showcase! As always: very informative and very good presentation!

@OlhaBatchvarov 2 жыл бұрын

Glad you liked it!

@guillermoamaro3591 2 жыл бұрын

Thank you very much for sharing the information! Very interesting!

@OlhaBatchvarov 2 жыл бұрын

My pleasure!

@user-pk7es6fb5h 2 жыл бұрын

Инструменты класс 👍 особенно шлифовальный, гениально и просто!🤔

@semenkhv 2 жыл бұрын

надо повторить))) из доступных материалов и строй магазина, и не переплачивать за брэнд

@1BatJam Жыл бұрын

Ohla it was a pleasure meeting you and your husband at the Connecticut show Saturday! I bought one slicer at your advice and I love it! I was the guy with the shyhawk on the back of his jacket! ❤❤ love to Imber!

@OlhaBatchvarov Жыл бұрын

Thank you very much! Now I will have to rewatch all my videos that I filmed at the conference to find you)))

@1BatJam Жыл бұрын

I was standing next to you while your husband was speaking! I was leaning on the separation door when you took pictures of him speaking!

@OlhaBatchvarov Жыл бұрын

@@1BatJam Now I remember you)))

@mynameisab67 2 жыл бұрын

Прекрасно. Дорого. Богато :) Потрясающий инструмент и не менее прекрасный обзор!

@OlhaBatchvarov 2 жыл бұрын

Спасибо!

@khalidsalim9854 2 жыл бұрын

Congratulations on your new devices, I'm very happy. Good luck Olha 🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦🐝🐝🐝🐝🐝

@OlhaBatchvarov 2 жыл бұрын

Many many thanks

@RodneyBuxton 2 жыл бұрын

I had not heard of these tools before but the look awesome and incredibly accurate. I would be interested in seeing you use them in your builds. Your level of accuracy is already amazing I can only imagine what these will add.

@OlhaBatchvarov 2 жыл бұрын

Thank you! Will do!

@toddwardwell4776 2 жыл бұрын

As you build future ship models, I would love to see you use a few of these tools. I saw them up at the NE Conference and will likely buy the sander.

@OlhaBatchvarov 2 жыл бұрын

Will do! I'm already shooting videos of using it on different woods and on different parts of the models. To show the full potential of this tool...

@Johnny-tt8zc 2 жыл бұрын

That slicer might have a home with me. I’m getting older and my hands don’t really cut straight anymore.

@OlhaBatchvarov 2 жыл бұрын

Yes, this tool makes life easier!

@randy-yk1yk 2 жыл бұрын

Picking up a used precision bevel gauge would take both those tools to the next level. Watch E-Bay and you can usually get them pretty reasonably. Your mitered frames and the butt joints will thank you.

@OlhaBatchvarov 2 жыл бұрын

I was amazed at how accurate these tools are, but as people say "There is no limit to improvement" and you can use a precision bevel gauge for an even more perfect result!..

@eduardosuarez4239 2 жыл бұрын

Olha Gracias por compartir tu vídeo 👌👌👌👌👌.....🇲🇽......

@OlhaBatchvarov 2 жыл бұрын

O prazer é meu!

@iannesbit3231 2 жыл бұрын

Hi ,I'm English and always use hand tools, both with wood and plastic. And a decent ruler

@OlhaBatchvarov 2 жыл бұрын

I hope my English is legible)))

@SB-fe5pc 2 жыл бұрын

Cool !👍

@OlhaBatchvarov 2 жыл бұрын

Thanks!

@moejotuber Жыл бұрын

always wanted to build a " stick " fuselage old time glider, these would be the way.

@philtatnell3685 Ай бұрын

Great video! I’m new to model ship building and I’m thinking the slicer would be a very handy tool. Do you think it would cut 0.4mm walnut planking cleanly?

@OlhaBatchvarov Ай бұрын

I cut a 7x7 mm walnut and everything was clear!

@jeffreycohn6407 2 жыл бұрын

Thanks so much for showing us these. If you had to choose this or the proxxon sander, which would you prefer?

@OlhaBatchvarov 2 жыл бұрын

For the apartment this is exactly it, and for the workshop something electric and bigger. Maybe it's even better to choose a thickness planer (drum sander) instead of an electric sender!

@djdyke47 Жыл бұрын

Just a quick question Olha. I’ve seen you use both the Ultimation manual sander and cutter as well at the traxxon electric versions of the same. Your work is so precise I’m wondering if you prefer the manual to the electric or vice versa. If you were just starting out which would you prioritize? TIA!!

@OlhaBatchvarov Жыл бұрын

I do almost everything on a hand drive now. Electric is now only used for sanding bars when sawing sheets on a tablesaw...

@dfmayes 2 жыл бұрын

Thanks for the video. Never seen a hand-cranked sander. Do you have to bolt the sander to the table? I may get the slicer.

@OlhaBatchvarov 2 жыл бұрын

You can fasten it to the table or just clamp it. And I like to move it around the model depending on which side I work from...

@andreyandrey4639 2 жыл бұрын

Dear Olha! Thanks a lot for new video. If it possible, send please the address and link (reference) of the shop, where you ordered. We Will wait the new video about additional options for tool. Best Regards, Andrey

@alexp7167 2 жыл бұрын

Присоединяюсь

@OlhaBatchvarov 2 жыл бұрын

I can't write links in comments because KZfaq blocks them. That's why I write all direct links in the description under the video! I also show in the video the address of the website at 00:21 and repeat it in close-up at 11:26...

@andreyandrey4639 2 жыл бұрын

Thank you!

@lidialidia6981 2 жыл бұрын

Ого 👍 цікаво, інструмент супер,браво Оля 💙💛

@OlhaBatchvarov 2 жыл бұрын

Дякую!

@user-hi6ux5jp8b 6 ай бұрын

Donde puedo adquirir esa maravillosas herramientas muchas gracias y felicidades por su gran trabajo un saludo desde canarias españa

@OlhaBatchvarov 6 ай бұрын

Escribí un enlace directo al fabricante en la descripción debajo del video.

@juancarlosbenidorm9398 2 жыл бұрын

excelentes herramientas para una artista seguro que con ellas harás maravillas, si es posible hacerlo mejor, la única pega es él precio muy elevado pero gracias por la información saludos

@OlhaBatchvarov 2 жыл бұрын

Es mucho ya veces tres veces más barato que una herramienta eléctrica. Si elige algo chino hecho de plástico, el resultado será el mismo. Por lo tanto, es mejor comprar una buena herramienta con consumibles disponibles una vez que una nueva cada año porque las falsificaciones de plástico chinas no se pueden reparar o tienen consumibles caros...

@viktorasavgulis1669 2 жыл бұрын

👍

@MrDastardly Жыл бұрын

Nice looking tools but from what I have seen they have limited use when working with hardwoods. Overpriced when compared with similar tools from other sources.

@OlhaBatchvarov Жыл бұрын

I work on them boxwood, pear wood, black hornbeam, ebony and I am very happy with the result... Are there any harder woods? I have separate videos of these tools in use, you can find them in the "Necessary Tools" playlist...

@MrDastardly Жыл бұрын

⁠@@OlhaBatchvarov I use Maple, Oak & Hickory which have greater hardness than the woods which you refer to. A German company makes similar tools of similar size (about 200 x 200 x 210 mm) which work off a tiny mobile phone size transformer. They range in price from €95 to €130. Made in Germany and no Chinese trash!! Highly recommended.

@kruzinshteinkukryniksy 2 жыл бұрын

ОЧЕНЬ ХОРОШИЙ ИНСТРУМЕНТ...

@OlhaBatchvarov 2 жыл бұрын

Спасибо!

@JustAnotherBigby 2 жыл бұрын

nice camera work.

@OlhaBatchvarov 2 жыл бұрын

Many many thanks

@Wilett614 2 жыл бұрын

Olha YOUR presentation and Video of these tools is Far Better than Al's lol ..... Thank You !!

@OlhaBatchvarov 2 жыл бұрын

Thank you! Glad you like them!)))

@shelbyseelbach9568 2 жыл бұрын

I'm assuming looking at the cutter that the fall off side always needs to be cut again to be usable? In other words it produces a straight cut only on one side of the blade?

@OlhaBatchvarov 2 жыл бұрын

Yes, because it depends on the shape of the blade, which makes only one side perfectly 90 degrees...

@shelbyseelbach9568 2 жыл бұрын

@@OlhaBatchvarov Thank you for the reply. I was pretty sure that was what I was seeing.

@generussell2559 Жыл бұрын

What is the thickest hardwood you can cut with the slicer?

@OlhaBatchvarov Жыл бұрын

So far, I was able to use it to cut pear and boxwood with a thickness of only 1,0-1,5 mm - the cutter coped with this thickness without problems...

@gerardtempelman4245 2 жыл бұрын

Hello again Dear Olha, Great tools that you have there, where they expensive and are they available in the Netherlands? May I ask you the price of what each tool? Greetings from your Dutch friend Gerard.

@OlhaBatchvarov 2 жыл бұрын

I don't know about delivery and where the distributors are! You need to go to the manufacturer's website and try to write in "Contact Us"! I wrote all the links in the description under the video, because KZfaq blocks comments with links...

@davidrasch3082 Жыл бұрын

This tool is worth checking out. Did you use this on Confederacy?

@OlhaBatchvarov Жыл бұрын

Yes, in issue #6 I used those new tools!

@Roman-hx3qj Жыл бұрын

What is the maximum cutting capacity in mm of the slicer when cutting Pear? Are the blade’s available only through Ultimation?

@OlhaBatchvarov Жыл бұрын

These are standard utility knife blades but expensive (heavy duty). I did not have to cut very thick strips of pear, but it is soft compared to boxwood... The thickest that I cut without problems was a 7x7mm walnut... About a month ago, I published a video about this slicer and its capabilities...

@Roman-hx3qj Жыл бұрын

@@OlhaBatchvarov thank you Olha. I will look for it.

@charming6184 2 жыл бұрын

🙏🥰

@ghrey8282 2 жыл бұрын

My initial response is; I must have these!!! I may eventually calm down.....

@OlhaBatchvarov 2 жыл бұрын

I am making videos about using it)))so you will not calm down...

@ghrey8282 2 жыл бұрын

@@OlhaBatchvarov guess I will just have to Subscribe!

@ekkehardlehmann7016 2 жыл бұрын

This are good Tools- but very expensive. Why you don`t use Proxxon (Tellerschleifgerät »TG 125/E«, 140 W, Elektro), you have to pay 149 € for it. And it is with an electrical engine. Good luck for your projects and your videos. I like to watch all! Greetings from Germany!

@OlhaBatchvarov 2 жыл бұрын

I have a proxon, but it still needs a vacuum cleaner, so this tool is only suitable for the workshop. And most modelers have only a table in their apartment and the issue of dust becomes very important! And by the way, accuracy is not about the proxxon, so it loses on several levels. By the way, I want to make a video comparing two senders!

@ekkehardlehmann7016 2 жыл бұрын

@@OlhaBatchvarov OK, I´ve a workshop and I can regulate the drive and I have a master/slave switch for the dust-cleaner. Of course, if you have only a table it is better to make it with handcraft. Sorry I forgot this... Have a nice day and thank you for your answer!

@carolinabravo5629 5 ай бұрын

Hello, I' m writting from.Chile and I want to know how much is the total cost of "Sander Repeater & Slicer Package including taxes and shipping cost. Thanks.

@OlhaBatchvarov 5 ай бұрын

You can find this out only by putting the product in the basket and specifying the delivery address. The manufacturer often gives discounts if you buy their tools in sets. Links in the description under the video!

@sub04aru 2 жыл бұрын

Magical tools. How do you guys afford these lol?

@OlhaBatchvarov 2 жыл бұрын

In my case - I need to work 24/7 ...

@sub04aru 2 жыл бұрын

@@OlhaBatchvarov I guess affordability isn’t really the issue, it’s commitment to the craft. Maybe I’ll get there one day. Looking forward to watching you use them.

@DamianSheesh 2 жыл бұрын

Of course this video comes out a week after I splurge on a micro mark table saw. I feel like these two machines are 90 percent of the work. I have a very crappy version of that slicer from artesania latina, which is more frustrating than useful. It's a toy. This tool seems like the real deal. I only wish it had the ability to tilt for compound miters!

@OlhaBatchvarov 2 жыл бұрын

Good purchase! Sander will definitely be needed to refine the details after the table saw. As for the slicer - I'm currently testing it on hardwood...

@DamianSheesh 2 жыл бұрын

@@OlhaBatchvarov thanks! I already have a belt/disc sander, but it's obviously not portable, quiet, or as versatile as this for small work. That slicer though... I'll wait for you report on hard wood

@cristianneagu6304 2 жыл бұрын

it seems like with the sander you'll only use a small narrow track of the disc's total surface which in time will get very used and the rest will remain untouched. not very efficient...

@OlhaBatchvarov 2 жыл бұрын

That's why you can move the table as a slider. I forgot to show it in the video, but if you pay attention, the aluminum part of the table is moved to the video several times. One nut from below fixes a table.

@cristianneagu6304 2 жыл бұрын

@@OlhaBatchvarov then that's very thoughtful, makes a difference.

@ZBFLEX 11 ай бұрын

Where can I buy the Slicer? Cost?

@OlhaBatchvarov 11 ай бұрын

Links are in the description under the video!

@lowlifescump2810 2 жыл бұрын

Hi, mich fasziniert deine arbeit seit laangem schon sehr und habe in meiner jugend schon einziges an rc gebaut auch ohne bausetze.. Jetz reizt mich der bau der santa maria pinta und nina aber ich bekomme keine bau plane for free haha, hattestvdu eine ide wo ich die finden könnte, würde dir auch meine mail senden.. Du baust sehr schöne modelle und bist eben so schön 🐌🐌🐌😅schleim.. Eine antwort wurde mich sehr freuen. Grüße aus bremen. Pascal

@OlhaBatchvarov 2 жыл бұрын

Vielen Dank

@degardinlaurent9371 2 жыл бұрын

trancheuse très intéressante mai très cher 245€ disponible que depuis le Canada dommage

@OlhaBatchvarov 2 жыл бұрын

Oui, c'est un fabricant canadien

@degardinlaurent9371 2 жыл бұрын

Il y as beaucoup de frais de port depuis la France

@laurentvialette6807 11 ай бұрын

Les tarifs de ces petits appareils sont complètement abusifs.😢😢 Vraiment dommage.

@OlhaBatchvarov 11 ай бұрын

Ils valent tous les centres ! Au lieu d'acheter un tas de cochonneries, je préfère dépenser de l'argent une fois et oublier tous les problèmes...

@user-pv3mu6ow7v Жыл бұрын

Де їх можна купити в Україні ????я з міста ужгород Україна 👍🏻🇺🇦🇺🇦🇺🇦🥇

@OlhaBatchvarov Жыл бұрын

Я не впервнена що зараз можна робити замовлення в Україну. Але ви можете перевірити на сайті виробника. Лінки в описанні під відео. Дистрибюторів немає ніде але в них доставка по всьому світу і в Україну теж була, до війни...

@user-pv3mu6ow7v Жыл бұрын

дякую за відповідь ,буду шукати ,можливо аналог хоча з оригінальним інструментом працювати набагато краще,дякую.👍🏻

@modelman65 Жыл бұрын

Good Tools but I consider them to be WAY OVERPRICED!

@OlhaBatchvarov Жыл бұрын

And they are worth every cent! From the moment you open the box!

@joaopacheco3690 Ай бұрын

Very, very, very, very expensive tools

@OlhaBatchvarov Ай бұрын

And these are the type of tools that are worth every cent. You just take them out of the box and you can start working right away. You do not need to improve them or adapt them to the needs of shipmodeling, which is sometimes worth twice the cost of the tools themselves...

@joaopacheco3690 Ай бұрын

@@OlhaBatchvarov you need to make an economic assessment for a statement like that. have you done that. If so, can you share it? Besides, for the vast majority of the viewers, we're talking about an hobby (already a very expensive one), not a professional activity. By the way, have you purchased these tools?

@ks-ze4cx 5 ай бұрын

na ja , mögen ja gut sein, aber wenn ich die preise sehe, wollte mich nicht an die firma beteiligen , einfach nur unverschämt

@OlhaBatchvarov 5 ай бұрын

Die Lebensmittelpreise haben Sie hier nicht gesehen, daher ist auf dieser Seite der Welt alles viel teurer. Ich war schockiert, als ich in die Staaten zog. Zu Hause kaufte ich früher ein Stück Birnbaumholz für 2 Dollar, aber hier kostet ein Block der gleichen Größe 44 Dollar. Seien Sie also nicht überrascht! Aber diese Tools sind jeden Cent wert!

@stephensimpson2814 11 ай бұрын

Looks like the great tools but the horrible music and with very little verbal explanation I turned it off

@OlhaBatchvarov 11 ай бұрын

But definitely better than my terrible accent)))

@stevenweir9437 5 ай бұрын

Where is the link to your channel so we can see your work? Or are you just a blowhard with 0 experience?

@Topper_Harley68 10 ай бұрын

Those tools are overpriced.

@OlhaBatchvarov 9 ай бұрын

When you try to work with them, you will understand why! I've also had Chinese junk and branded similar tools - so I can definitely tell you that these are worth every cent!