Ultimax Tips - Yamaha Grizzly drive belt change

No video

Ultimax Tips - Yamaha Grizzly drive belt change

Рет қаралды 201,162

Ultimax Belts

Күн бұрын

Пікірлер: 22

@Hunterworks 4 жыл бұрын

This video left out something super important and the person doing video did this wrong, that washer under the nut is not a washer it is a spacer that must be placed around the splines on that shaft before the nut is tightened, you can see in video how it was not centered

@adamr8628 2 күн бұрын

I just bought a 1998 Grizzly 600. It has a rattle coming from the clutch housing. Gets a little louder when its revved up in neutral. Its not really loud, not like a loose nut rattling around inside, but a metallic tapping noise. I haven't listened for it much when riding, as I haven't ridden it much yet. So far the info I've seen online says that Yamahas are noisy and its normal. I'm wondering if its the sound of the weights in the clutch that are rattling? Does have anything to do with not having enough grease inside? I don't know enough abotu the clutch to know how it works or why it rattles.

@Algonqiun 3 жыл бұрын

10mm socket, welp I need to go buy a new one

@anthonymartinez5634 28 күн бұрын

What tool too use too torque the primary nut. I cant keep it from spinning

@jbcraig3899 8 жыл бұрын

thanks for the easy to understand video

@gerardodeblas 5 жыл бұрын

muy buen video gracias que numero de banda sera para una grizzly 350 cc 2008 mexicana

@horsepassion8304 11 ай бұрын

The size socket is a 7/8 not 22 btw

@MrEldeanyo 7 ай бұрын

🤣

@armandorodriguezreyes4718 Жыл бұрын

Buenas tardes disculpe asiadonde afloja la tuerca de enbrague o clos de la grisle 350 2014 4x4

@UltimaxBelts Жыл бұрын

Follow the instructions as shown in the video. You'll need a 22mm socket and an impact driver. It will be difficult without an impact driver but should come off fairly easy with an impact driver.

@hunterman600cc 3 жыл бұрын

Do the belts age despite low usage? Looking at a '98 with only 500 miles...

@78FullSizeBronco 3 жыл бұрын

Yes, just like tires, they dry out and crack with age.

@phillacey926 Жыл бұрын

Hi im about to try and do headgasket on mi 660r 2003... Any info would be much appreciated 👍

@UltimaxBelts Жыл бұрын

I'm sorry we can't offer any suggestions with this project. Best of luck and Happy Holidays!

@CactusJackSlade 7 жыл бұрын

I wish they said if you were supposed to lightly lube the clutch shaft bushing or not??...

@ultimategaming5022 2 жыл бұрын

When I try to take the nut off of the primary the clutch spins what should I do

@UltimaxBelts 2 жыл бұрын

If you are using an impact wrench to break the nut loose, a ½” impact should work better than a 3/8”. A pneumatic impact will typically work better than cordless. If this still doesn’t work, some people have had luck wrapping a ratchet strap around the clutch and tying it off so that it will not spin.

@WrongBozzKillers Жыл бұрын

Thats the problem I'm having at the moment