Agreed, I will definitely have to look into that silver vinyl wrap you mentioned.

I actually had to stop watching.........

Thank you!

That's awesome, thanks for the great comments, and hope you continue to enjoy these.

@@timmy4539 My Colts all have rifled barrels. My remington(as well as the Schofield) have smooth barrels. However, I only shoot them using pellets. Never steel BB's. :-)

I have the Colt and the Schofield, using pellets l found the Colt remarkably accurate at 10 yards, the Schofield was not accurate with 177 pellets, l remarked to my gunstore owner that l had never fired steel BBs or any BBs before and he gave me a packet of 500 to try, l only used them in the Schofield as its the only smooth bore l have, and l was amazed at how accurate the gun was with the BBs, l always understood they were less accurate than pellets but maybe so if pellets are thru a rifled barrel but the smooth bore suited the ball bearings much more. And leaving the cartridges in the Schofield and with it being break action load its far quicker to load than any other revolver. I was going to buy the Remington but heard lots of reports of it breaking quite often not long after purchase, l would be interested to know owners of its opinions

Is the Remington a little longer than the colt ?

Ha ha ha

Very nice 👍

yeah, that's right, remington-silver grips, which is what i will be doing when i get mine!, schofield-black, cowboy gun porn !.

Nice

@@NickBrakattack Black satin

ASG Schofield is better quality than the Bear River. Barra 1 is really good aswel

Checked with some and they all said it's too small a job to do. Definitely looking into the paints though

@@NickBrakattack I painted mine, you need 3 spray cans, 1 an adhesive enhancer, 2 a plastic paint primer and 3 a plastic spray paint, all 3 you can get from auto goods supplier's or departments in stores. , remove handles take a dish scrubbing pad and using the rough scouring part rub the handles to take off the top coat of the grips that will repel the spray otherwise, just a light rub will take off the shine shake the can until it's rattling well, spray light coats from about 6 or 7 inches away, the trick is to keep the can moving to stop the primer /paint building up and dripping, do 2 coats of adhesion enhancer, one coat wait a few minutes but don't let it dry out, add another, wait a few more minutes add the plastic primer ( you can just use the plastic primer if you want but l like the belt n braces approach, let the coats dry for a few minutes again but not longer than 5 minutes, then with the colour of choice black in my case 2 to 3 coats, but again do them lightly one at a time with 3 minutes between coats, don't be tempted to do it all at once, then leave in a well ventilated but warmish room for at least 1 day but a week if you can wait and the job is done, you can apply a neutral varnish or lacquer spray after 7 days in matt or gloss whichever takes your fancy but it's not really necessary. You must let them dry completely after the last coat, as l said 1 day at least but ideally a week or longer depending how much self control you have lol.

Good call

Will do if I ever come across them. Thanks for the comments

Never shot any of them, just got them as a collection and to display. There are several pretty good videos on each around and seemed like the Remington was most accurate.

Thanks for the tip. I plan to get one at BUDK. I also ordered the Uberti "Frank James" version with the lanyard ring in 45 Colt but the dealer said it might take a few months to get one.

Have you had any issues with the schofeild?? i wanna buy one but they are almost impossible to find in canada i gotta order it online and id rather know what im buying

@@AntoT02 I have the Schofield and it's awesome. I suggest going through the pyramid air website. It technically comes in 3 styles, nickel, black, and "weathered". But the weathered and the black are very similar. Also, if you want the faux ivory grips, you'll have to order those separate. They all come with faux wood.

It basically fell off into my hand when I opened it.

@@NickBrakattack thanks for your quick feedback. I guess it was a manufacturing issue then

On one of them or all of them?

Ha ha ha

It has nothing to do with America and more to do with KZfaq's policies

Good stuff

I will have to double check about the cartridges ability to be used between each other, would assume so though.

I think at this point that is what I will try

What kinda boof are you smoking that you think a co2 pistol can reach 1200 fps? These things only peak at 500 fps *MAYBE* with alloy pellets

@@HaidoroTTV I was generally speaking of air guns. Not just pistols. Some rifles do exceed 1200fps.

Have plenty of other items to do shooting with, so ok to keep these in pristine condition.

Come to the U.S. and it becomes a toy

Here in my country, those Airguns (>0.5J

Yep, mis-spoke in the order of these, still looking to customize them to match up.