COULD YOU REVIEW THE INTEGRATED LASER GEN3 MODEL HDR 50 TR50L 13 JOULES 480FPS Vs THE TS68 HDR68 16 JOULES 360FPS VERSION

What does it cos

Haha one week it’s a .177 CO2 pistol another is a .50 Cal PCP monster - you never know in this new “profession” of ours :) Wishing you a great weekend my friend and lots of views on your awesome, very practical and helpful channel

Thank you so much Robert!! Both for the great advice and for the kind words! Using silicon oil on the belt mechanism makes complete sense and I will do it immediately! As for the .43 cal is that the HDP? If so, that’s the ONLY T4E gun that I don’t have in my inventory haha and you’re right, I should rectify that. Thank you again

@@AirgunAlleyNo, it's the Glock 17 Gen 5 0.43 caliber. Looks identical to the pellet pistol you reviewed, except it's 0.43 caliber with a different magazine mechanics.

@robertstevens9656 yess! Thanks, I googled it right after and found it. Thanks for introducing me to it man!

Loved your comment, thanks for it, as I could learn. I love replica guns, but I could not even imagine that the 0.43 could "fire" so many different "bullets"... 😮

Yess! Often people don’t realize how tough 10% ballistic gel is. 2 inches is still pretty deep! All the best my friend

Hey man, thank YOU for this - super happy I could be somewhat helpful 🙏🏽🙌🏼

Use the umarex airsoft glock instead. The slide action and magazine are way more realistic. If you're looking for a heavier blowback feel- The ghk g3 co2 is the way to go.

I was thinking the same thing. That blowback adds realism to films. I bought an SBR air rifle with blowback. I’m going to check this out.

Oh man, thank you so much!!! Your support is vital and thank you for appreciating the channel’s growth!! 🙏🏽🙏🏽

Hahaha! Thank you!!! 🙏🏽

Hey but at least you have Christiania 😂😂 I loved it there when I visited in 1997 :) Thank you as always my dear Henrik!!

Scott I can’t thank you enough for always being so kind!! 🙏🏽🙏🏽

As always thank you so much Jon!! A very fun pistol to play around with 🙌🏼🙏🏽

Thank YOU!! You’re always so kind and I truly appreciate your support my friend! Next week I’ll be putting out a video of a new PCP rifle , then it should be the new 1077 TAC :) Again, thank you!

Thank you Bernat! You too! 🙏🏽🙌🏼

Happy Easter my friend and thank you!! So I just found out that Umarex makes a .43 cal version of this exact same gun - that’s NOT the T4E HDP 🤯 I also had no idea… so there two .43 cal models!

Thank you as always, Michael!

Hahahaha! Was I convincing enough 😂😂 Thanks you my dear Craig 🙏🏽 Wishing all is well with your family

It really does! Thanks a lot my friend

Mitico Paoloooo! Da quanto tempooo! Hai visto, piano piano si cresce, l’è düra come ben sai, ma ci proviamo. Stavo proprio vedendo il tuo video del ritorno alla stagione. Bellissimo come tutti i tuoi video. Sei un gran narratore e i paesaggi sono a dir poco mozzafiato! Grazie ancora Paolo (e diveriti con la tua Glock 19!!)

No it doesn't. Only on the bb versions

The crosman vigilante is cheap and effective.

Thank you as always!! 🙌🏼

Yes, I actually just learned about that one… looks very interesting!

Easier to hang on the shelves of Bass Shop pro I guess haha - but I agree,there’s nothing like a cool gun in a nice box!

Hahahaha! He should! Thank you so much Luiz!! I agree with you very much, I’m also not big on Glocks, but it’s always good to learn a bit about everything. As always, I can’t thank you enough for your renewed kindness 🙏🏽🙌🏼

Hi George, 21 shots per mag. At min 8:40 it’s all explained…

Thanks again!

Haha we have all sizes and fps on this channel, at your service

Don’t they all come from there? 😂 Have fun my friend!

Yup. I just exactly thought of that same thing!😂 I've been working on my Canebrake lately and HPAd it a while back. Those H&N Hornet Pistol pellets caught my attention also due thinking they'd be a way cool choice for the Canebrake. Short/thin mags (or belts) can be an annoying things when searching for cool pellets - which can often be found as just a wee bit too long. And I always prefer to seat well every single pellet in my Sig belts.. PS. ...and what I just calculated on PA's Muzzle Energy to Velocity -calculator, my 10.2fpe (avg meas.) Canebrake oughta do an average of about 772fps with 7.7gr Hornet Pistol pellets.. My Canebrake is quite as og. Only has a pressure input of 105bars to have achieved that.. I did recently have it apart for the very first time and polished up internal stuff after those readings - but I'm not expecting differences in performance after my "1st service" to it, only hoping for a slightly smoother triggerpull..

@@brorjordas1979 772 fps then why the hell is mine doing over 800 Plus with 8 gr. pellets shit either way the Canebrake is one very Dangerous and Very Leathal Airgun. you can do Headshots at 100 yds. and drop them like Nothing get the LVPO Optic for the C-bake it's worth it.

@@joseglenn20 No idea why yours go over 800 with 8gr.😁 Must be differences between our Canebrake setups then. Mine was as original straight outta the box, and only equipped with an adapter and a 105bar HPA tank when tested. I bought a new 10ci tank and a clamp-on buttstock for it. But had to take and borrow the 105bar set regulator from my Virtus tank to just get it tested on HPA. I was just interested to see how my Canebrake shot with an HPA setup. Clearly good enough for me imo. Must test it again surely though. The inner barrel now well cleaned and attached. The inner barrel was originally kinda locktited..but yet still somehow loose. But now fit like a sob.👍🏻 I did order and get a new regulator, which now is going onto my 13ci Virtus tank to replace the og reg which the Canebrake got, now seemingly as a "permanent loaner".😂 My new Virtus reg was sold as a "1800psi" model - but apparently that is not really the case.🤣 The og 1800psi Belleville setup, (when settled down) made an output averaged around 97bar(1400psi) (including a slow creep) - and right just now, with an added 0.5mm shim, it is set at 128bar(1856psi)..🙄🤣 Yea.. I need to find a thinner shim than 0.5 now - or find a better Belleville setup.. But, I did already find my 75bar/1100psi setup with this reg..🤣 But, yes.. The Canebrake is one awesome .177 rifle. I now love it as much as my .22 Virtus.

@@joseglenn20 Oh yeah. I really gotta take this opportunity to ask you.. At what output pressure does your Canebrake do over 800fps with 8gr? A too high pressure will just lean more towards a valve lock - which might be more my case. The Canebrake's valve stem movement is more limited than the stem on my Virtus due a different stem spring. My Canebrake's stem only opens up 3mm maximum - which then also prevents the extending nozzle to get buttsmashed and ruined by the valve stem. A lower (or just an "optimal") pressure oughta keep the valve stem's opening movement time as long enough to put a good speed to the pellet with a lower pressure than I have now.. My Virtus once shot 850fps with 11.9gr Hobbys with just around 92bars.. But that was before, back when my Virtus was quite new and had all original parts. But my Virtus been broken and fixed a few times now already..

@@brorjordas1979 if your gun is Brand new Leave it alone and let it break in over time the power will go up. just dont use co2 in the winter you'll break it.

Grazie mille!!

Ummm... Pretty sure it was stated at the start of the video that this is a review of the Glock 17 Gen 5 .177 Pellet Gun; so, right, no AEA.

@MichaelWhite-cx4ho hey Michael, thanks for your response :) I think there was a loss in translation. He was asking if I have any AEA PCP guns as well… I appreciate you my friend!

Ciao carissimo! Vedo che hai trovato i miei video AEA… ce ne saranno molti a venire che quest’anno sia AEA che BinTac hanno una montagna di nuovi prodotti che fanno paura!