I couldn't agree more! I think it is a fantastic Co2 pistol at that price. What impressed me the most was the velocity. Thank you for the detailed information and I appreciate you watching 😉👍

What brand co2 tanks did you use?

@@dep7up I cannot say for certain as it was two years ago, but 90% chance that it was Crosman, as that is all I have been buying for a long time.

​@@AirgunDetectivessame here Amazon even wouldn't accept my return they rejected it and I wasted $65 on this model for the same thing that happened with the magazine it has a hard time reloading to the point where it jams up before I could even fire the weapon because of the fact that it stay in the gun itself the magazine tends to fall out or not clipped in all the way and it becomes useless and I'm wasting pellets this really sucks I would just works perfectly at first but then after using the spring clip to reload it doesn't work I wish I could find a nice stable pistol to be able to fire the right way

😂😂

I couldn't agree more! Thanks for watching 👍

@@AirgunDetectives quick question i have this exact gun i put the cart of co2 and shot off a good 30 rounds i still have half of the cart full am i fine to leave the co2 in it for my next shooting which will be in a few hrs ..until its empty or do i have to take out the co2 right away?

@@7991128 you can leave the Co2 in the gun for a few days with no issues whatsoever. The reason you don't leave Co2 cartridges in for an extended period of time is it compresses the seal. You are good to go👍

@@AirgunDetectives You can leave it in indefinitely. It doesn't damage the seal. I've had guns with the CO2 in it for years and they still fired properly.

@@CaptZdq1 No, on most modern CO2 guns if left for too long it leaves an imprint on the seal and makes it go hard (ask how I know!). A though soaking in Comma power steering fluid & conditioner seems to fix it although the seal is very soft afterwards.

Thank you for watching!!

What gen is it?

How much blowback is there, would love something similar to the same recoil of a glock

Yes sir

@@deltalou8987 no you

Alex, thanks for watching!

Wish it had Blowback at least but I totally agree. Although you're not necessarily dealing with the recoil of a real firearm BB/Pellet and Airsoft pistols and rifles are not only cheaper to shoot but also great training AIDS especially since you can go in your backyard versus going to a range. Yes some blowbacks do have little felt recoil nothing like a real firearm, of course ballistics are totally different. But still things like this are a very useful tool to work on your stance/hold, sight picture ect and are great beginners for youths to teach firearm safety. I have owned many air guns like the fully IWI licensed Uzi CO2 airsoft gun which came with a really nice case I wish I didn't sell it, a Walther CP88 pellet gun very nice weight and nickel finish all the way to a full metal WE TECH M4 CQBR which was surprisingly realistic in more ways than one. Not going to name them all but I just picked up the crosman R1 I have to say definitely check those out, you can use one or two CO2 in the magazine, Safe/Semi and Full auto at 1400 rounds per minute. But years ago I owned a .43 caliber magazine fed M4 paintball gun Way more realistic than anything Tippmann makes, it wasn't from RAP4 but it was mainly used for law enforcement training and millsem exercises. Just thought I would elaborate, great comment totally agree!

Yeah but the hammer coming back I mean the barrel coming back as the hammer okay don't always come back in the same direction and therefore don't really shoot consistent I mean this to me it's no fun if you can't hit anything

The higher velocity is usually because of how the blowback mechanism works, i.e. more gas is available and for longer.

Definitely more velocity with the non-blowback models.😉👍

not really a good idea to buy a bb gun for self defense but if its all you can get for it its a pretty good option

Its the best c02 gun ive ever had.. Rips through everything

screwing h

Donald, thanks for watching and enjoy your new Glock. They are a lot of fun👍😉

Bruh my shit keeps swerving to the left

Does yours do that

I pulled the pin apart and out with my finger tips within the firat 30 seconds of holding it. Works like a charm.

@@irinabeal3581 So I can take my safety switch off?? How again?

Thank you for watching and I appreciate you leaving comments!👍

Thanks for watching 😉

It's a heck of a bargain for the most part! Thanks again for watching 👍

Thanks Chris, welcome to the AGD family 😉👍That Glock is a bargain!

How is Blowback fake

@@CP-kb1du he means, it serves no actual function. It also reduces power by using c02

@@jayebejer7431 👌

@@CP-kb1du Jay answered. Still, blowback is fun if you don't mind less power. I personally prefer power.

I want BLOW BACK because I use for training. I want it to function as close to my real Glock as possible. Thats why I got the Glock 19X version. Blow back makes it more REAL...no Blow back is FAKE. (Wink)

Bought mine for 70$

You will love it! 😉👍

It would be perfect for you, and they are priced right. Thank you for tuning in 😉👍

I found one , it just sits inside your britches against your hip. No clips. No belt. The material holds it against your pants without it sliding down. And it slides in and out of the holster very nice. Got it for around 17$ at Cabela's

@airgun detectives-airgun reviews

Could kill a MF

350 is weak.. You want 450 like this glock ☝

It'll definitely hurt and almost certainly draw blood at close range against unprotected skin. If that's a problem get the Airsoft version.

Holster? If so where’d you buy one

You can't beat the performance for the $!👍😉

¡Muy poderoso también! ¡Gracias por ver!

hahahaha

It's a stick magazine

Read this airgundetectives.com/airguns-for-self-defense/

@@AirgunDetectives does it come with co2????

Yes

Have you try shoot anything like squirrels, rat, bird ? Does it kill?

@@whatgamerlol5831 i own this havent shot anything like that but it can pierce through every object i shoot at so it could probably injure the animal, maybe stun it and if u really tried then you could kill it

Look at the Type 3 and 4 models

Must be issue with safety not being turned off or you co2 isnt tight enough or your bbs dont go with this

One exists but has a poor reputation regarding reliability. A ballpoint pen with the ink tube and head removed seems to work, although you do need to use some care to avoid spillage.

Not worth repairing, parts are difficult to come by. However, it may be leaking by the o-ring that seals the Co2. Make sure you use some silicone oil on that Co2 or even Pelgun oil each time you install a new Co2. Just a small drop spread on the surface.

I mean… the Glock 19 is the smaller version of the Glock 17 so of course it’s smaller lol

The Glock non-blowback version should be well above 400 fps. If not you have a faulty gun.. You can't really compare those two guns. Completely different dynamics. Blowback vs non-blowback. I like them both! Add both to your collection and you won't be sorry 👍

Here you go amzn.to/40tL8g6

Try other BB's, don't by cheap ones.

Steel or copper? Copper can jam up

Β Π which ones do you prefer? Same issue happening to me

@@CamBamLifts These Daisy's work perfect. www.tacticalshop.gr/daisy-bbs I have Heckler and Koch BB's but haven't used them yet.

Make sure you use a drop of pelgun or silicone oil on the tip of every Co2 cartridge before you install it. Also, when you are screwing in the piercing screw, go at a rather fast or rapid pace. See if that helps. 😉👍🏻

same question

It would enter the muscle i think if u use metal bbs. 500 fps with a metal projectile is enough to go through clothing.

BBs only, but the pellets version is coming out.👍

@@AirgunDetectives oh hell yeah! I think I’ll wait for that to come out, I’ve always been more of a pellet man myself, but I live in California, do you think I would be able to own the pellet version in California?

Actually they are 5.1 grains as well. They have a similar velocity. I don't like the copper because they rust if they land in my pool. The zinc are much cleaner in the gun as well. 😉👍

Airgun Detectives-Airgun Reviews tnx for the explanation 🙂

Just use an allen key that fits the screw