Unbelievable Value with Lucky65 - Don't Miss Out!
Рет қаралды 2,735
10 күн бұрынIt's crazy how just a few years ago, QK or Zoom were the only options for a "budget" friendly keyboard. For some people, these still cost a lot and are not affordable. However, along comes the Lucky65, redefining the meaning of budget keyboard.
Overall, the Lucky65 is a very solid keyboard with a more clacky and creamy sound profile. The finishing is quite good. The anodization is not the finest, but it’s good enough. There is some inconsistency in the feel of the surface; some parts may feel super smooth while other parts can feel a little grainy. The stock stabilizers don’t have much rattle. The wires are properly balanced as well, which is surprising. I would still recommend relubing the stabs, as they feel a bit sluggish.
Music track: honey jam by massobeats
#custommechanicalkeyboard #customkeyboards #customkeyboards #customkeycap #customkeycaps #mechanicalkeyboard #mechanicalkeyboards #unboxing #keyboard #keyboards #unboxingvideo
@doanhle1748 6 күн бұрын
i bought one, and tried to make a clacky build: you just can't do it. The board even feels like you're typing on foam and the sound is pretty eh... but the board can be nice and thocky, and its tri mode capabilities also make the board worth purchasing.
@maxkeeb_official 6 күн бұрын
U probably need a clacky switch. Change the plate to carbon fibre, use UHMWPE tape to seal the flex cut. Probably can get it to clack, but won’t be as bright due to the flexcut.
@doanhle1748 5 күн бұрын
@@maxkeeb_official haven't found a CF plate for it, and i've tried HMX pearls on it. I liked the sound but it's not truly clacky, in my opinion. i see where you're going though
@keknoi1692 5 күн бұрын
Skill Issue
@ZeroChoices 6 күн бұрын
It's e coat version is great, pretty much on par to higher end keyboards in like the 100 to 200 dollar range
@maxkeeb_official 6 күн бұрын
You’re right. I’m just concerned with E-coat’s durability in general.
@Kenzie1051 7 күн бұрын
Why does the plate look like foam? Its so wobbly! very nice build by the way.
@maxkeeb_official 6 күн бұрын
It’s made of nylon. Similar to PC and POM, soft materials
@Kenzie1051 6 күн бұрын
@@maxkeeb_official I mean yeah but usually PC and POM have enough structure to resist the pull of gravity, but nylon doesn’t?
@maxkeeb_official 6 күн бұрын
@@Kenzie1051 You mean the plate seems bent upward? That’s because the gasket mounting point on the PCB. So the plate is free to move around the case. It will be held in place when you insert the switches.
@Kenzie1051 6 күн бұрын
@@maxkeeb_official every time you hold the plate in the video it seems to be bending downwards, barley able to resist gravity. around 0:27 and also around 1:55 are both places where we see this.
@maxkeeb_official 6 күн бұрын
@@Kenzie1051it’s a soft material. Same thing can be seen if you’re using PC, PP or even POM plate.
@Viper4ever05 7 күн бұрын
how do you deal with not having the F keys? I always end up needing them for something.
@maxkeeb_official 7 күн бұрын
I mainly use a TKL for productivity work. On a 65%, you can always use the FN key combinations.
@ambasing69 2 сағат бұрын
I got so used to having no f-row that I sometimes forget I don’t need to press fn on some keyboards
Meletrix
Рет қаралды 1,2 М.