( UNBELIEVABLE ) What have we achieved with the MINI GASOLINE ENGINE ( New Release )

  Рет қаралды 17,479,873

Manual do Motor Stirling - Leandro Wagner

Manual do Motor Stirling - Leandro Wagner

2 жыл бұрын

This 3.5cc stationary mini engine is a 4 stroke engine, but it is necessary to add 2% oil 2 stroke to the gasoline to help lubricate the piston, noting that it is not necessary to fill the crankcase with lubricating oil.
► Get your 3.5 cc Mini Gasoline Engine, Stationary Model from this page: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. This text presents a summary of the engine characteristics, engine technical data, precautions to be taken and its purpose.
► Cautions:
- should only be handled by adults;
- there is no need for lubricating oil in the crankcase;
- it is mandatory to add 2% oil 2 times, mixed with gasoline;
- after a few days at rest, remove the gasoline from the fuel tank;
- make sure that the two 3.7 volt batteries are charged;
- keep caution, to avoid serious burns from the engine exhaust, which is extremely hot, as warned in the video;
- the initial start of the motor is carried out in a counterclockwise direction;
- avoid leaving it running for more than 7 minutes, so as not to overheat the engine;
► Positive points:
- nice for those who like retro design;
- finishing with perfect details that resemble a real engine;
- the sound produced by the engine is loud and impactful;
- does not require maintenance;
- high performance and a lot of torque;
- low battery consumption in electric ignition;
- ease of starting the engine;
- good stability in its operation;
- does not need any adjustment;
- all the metals used in its construction have good quality;
► Negative points:
- super heating from 7 minutes;
► Observations and personal opinion:
1 - This 1/8 scale mini engine is a perfect replica of the Dongfeng S1100 stationary diesel engine, also known as D15, a 15 HP version, very popular and used in almost all rural Asian territory, in rice irrigation, sugar cane, pasture grinder and as a propellant for electric generators, in places without electricity.
2 - It is a product with a decorative purpose, it has an impeccable finish, with aesthetic details incredibly similar to a real engine.
3 - I do not recommend a prolonged use of more than 7 minutes, due to the overheating of the engine, even designed with a small water reservoir for engine cooling, it is not enough to keep the engine at a reliable operating temperature. This super heating occurs due to the high compression ratio, favoring this high performance.
4 - Do not exceed the maximum capacity of 8 ml of gasoline in the fuel tank, because gasoline can be expelled through the vent of the fuel tank.
5 - The entire engine block is made of aluminum and the other parts are made of stainless steel.
6 - The engine speed varies between 1500 rpm at idle, up to 8000 rpm.
7 - Another feature that caught my attention is the ease of starting the engine, just turn the steering wheel for two or three turns, blocking the carburetor air intake, turn on the ignition key and overcome the compression that the engine runs . There will only be a greater difficulty in starting the initial start, if the engine is for more than 24 hours without running, which is totally tolerable for a carbureted engine.
8 - It is also worth mentioning, high precision of the project, observed by the low vibration of the engine, solved with two additional rocker arms next to the main crankshaft, worthy of much praise.
► Get your Stirling engine battle tank on this page: bit.ly/2ZfFykx, using the code "Leandro" get 10% off.
► Product features:
- Material: Aluminum Alloy + Copper + Steel
- Engine size: 94 x 83 x 56mm
- Size of the base: 100 x 122 x 22 mm
- Displacement: 3.5cc
- Speed: 1500-8000 rpm
- Piston diameter: 16.60 mm
- Stroke: 17.00 mm
- fuel tank with a capacity of 8 ml of gasoline
- 15 ml water tank
- Starting mode: External power (electric drill) or manual traction start
- Fuel: Gasoline or aviation kerosene (fuel needs to be mixed with a small amount of lubricating oil for combustion)
► Get your tractor on this page: bit.ly/3fjm7wT ► using the code "Leandro" get 10% off.
Music Credit🔻
Music provided by NoCopyrightSounds:
► Song: Jim Yosef - Link [NCS Release]
Watch: • Jim Yosef - Link | Hou...
Download/Stream: ncs.io/LinkYO
► Track: Jim Yosef & Alex Skrindo - Ruby [NCS Release]
Watch: • Jim Yosef & Alex Skrin...
Free Download / Stream: ncs.io/R
Blog: manualdomotorstirling.blogspot...
Facebook: / 292018690925248
Thank you all for the attention.
Leandro Wagner.

Пікірлер: 1 600
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
*This 3.5cc mini stationary engine* is a 4-stroke engine, but it is necessary to add 2% oil 2-stroke to the gasoline to help lubricate the piston, noting that it is not necessary to fill the crankcase with lubricating oil. *► Care:* - must only be handled by adults; - no lubricating oil is needed in the crankcase; - it is mandatory to add 2% oil 2 times, mixed with gasoline; - after a few days of rest, remove the fuel from the fuel tank; - make sure that the two 3.7 volt batteries are charged; - be careful, to avoid serious burns in the engine discharge, which is extremely hot, as warned in the video; - the initial start of the motor is carried out counterclockwise; - avoid leaving it running for more than 7 minutes, so as not to overheat the engine; *► Get your* Mini 3.5 cc gasoline engine, stationary model from this page: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. This text presents a summary of the engine characteristics, technical data of the engine, precautions to be taken and its purpose. *► Positive points:* - nice for those who like retro design; - finish with perfect details that resemble a real engine; - the sound produced by the engine is loud and shocking; - does not require maintenance; - high performance and a lot of torque; - low battery consumption in electric ignition; - easy to start the engine; - good stability in its functioning; - does not require any adjustment; - all metals used in its construction are of good quality; *► Negative points:* - super heating from 7 minutes; *► Observations and personal opinion:* 1 - This 1/8th scale mini engine is a perfect replica of the Dongfeng S1100 stationary diesel engine, also known as D15, a 15 HP version, very popular and used in almost all rural areas of Asia, in rice irrigation, sugar cane, pasture grinder and as a propellant for electric generators, in places devoid of electricity. 2 - This is a product with a decorative purpose, it has an impeccable finish, with aesthetic details incredibly similar to a real engine. 3 - I do not recommend a prolonged use of more than 7 minutes, due to overheating of the engine, even designed with a small water reservoir for cooling the engine, it is not enough to keep the engine at a reliable operating temperature. This super heating occurs due to the high compression rate, favoring this high performance. 4 - Do not exceed the maximum capacity of 8 ml of gasoline in the fuel tank, as gasoline can be expelled through the fuel tank vent. 5 - The entire engine block is made of aluminum and the other parts are made of stainless steel. 6 - The engine speed varies between 1500 rpm at idle, up to 8000 rpm. 7 - Another feature that caught my attention is how easy it is to start the engine, just turn the steering wheel for two or three turns, blocking the carburetor air intake, turn on the ignition key and overcome the compression and the engine will start . There will only be greater difficulty in initial starting if the engine is not running for more than 24 hours, which is totally tolerable for a carbureted engine. 8 - It is also worth mentioning the high precision of the design, observed by the low vibration of the engine, solved with two additional rocker arms next to the main crankshaft, worthy of much praise. *► Get your Stirling engine battle tank* on this page: bit.ly/2ZfFykx, using the code "Leandro" get 10% off. *► Product features:* - Material: Aluminum Alloy + Copper + Steel - Motor Size: 94 x 83 x 56mm - Size of the base: 100 x 122 x 22 mm - Displacement: 3.5cc - Speed: 1500-8000 rpm - Piston diameter: 16.60 mm - Stroke: 17.00 mm - fuel tank with capacity for 8 ml of gasoline - water tank with a capacity of 15 ml - Start mode: External force (electric drill) or manual pull start - Fuel: Gasoline or aviation kerosene (fuel needs to be mixed with a small amount of lubricating oil for combustion) *► Purchase your tractor* on this page: bit.ly/3fjm7wT ► using code "Leandro" get 10% off. I recommend the "Enginediy" website, a serious and reliable company. The Product is not taxed in Brazil. If it is blocked at customs, a new product will be sent to the customer without additional fees. Thank you all for the attention.
@bowaolay3052
@bowaolay3052 Жыл бұрын
♥️
@rubinask186
@rubinask186 Жыл бұрын
জয় থথধর
@israfilsa5580
@israfilsa5580 Жыл бұрын
Bbb
@chelseamaharani6366
@chelseamaharani6366 Жыл бұрын
J
@samnarey101
@samnarey101 Жыл бұрын
០ផផ
@InvencoesDIY
@InvencoesDIY 2 жыл бұрын
Parabéns por esse belo trabalho amigo, o vídeo ficou surpreendente. Essa animação com certeza não foi fácil, pois precisa de muito empenho em cada detalhes do vídeo, e muita criatividade. Te desejo sucesso sempre 🙌👍
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muito obrigado, tenho uma divida de gratidão com você, que foi uma peça muito importante para este vídeo! Leandro Wagner.
@AbdusSalam-dr2wj
@AbdusSalam-dr2wj 2 жыл бұрын
@@ManualdoMotorStirling 0
@moazrayan6337
@moazrayan6337 2 жыл бұрын
@@ManualdoMotorStirling ভাই আপনে কি বাংলাদেশী
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
@@moazrayan6337 আমি ব্রাজিল থেকে এসেছি, এবং এখানে ব্যবহৃত আমার অফিসিয়াল ভাষা পর্তুগিজ। চ্যানেলে সর্বদা স্বাগতম। লিয়েন্দ্রো ওয়াগনার।
@asteriowagner7847
@asteriowagner7847 2 жыл бұрын
Muito bom 👏👍 esta cada vez melhor este rapaz . Mas conhecendo o Leandro não é surpresa. Fico feliz pelo sucesso
@kennethjanczak4900
@kennethjanczak4900 2 жыл бұрын
Fantastic..... Thanks for taking the time to make the video and share it
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
I'm glad you liked it, your satisfaction is my motivation. Leandro Wagner.
@MrMinimum24
@MrMinimum24 2 жыл бұрын
Wow i watched complete video. What a hardwork man on this project and editing is perfect . Your patience is the key to your success.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you so much for this encouraging compliment. But I confess that it was the most laborious video ever for me! Leandro Wagner.
@MrMinimum24
@MrMinimum24 2 жыл бұрын
Yes I know because video speak itself hardwork behind this masterpiece.
@marcosvaleriociencia1021
@marcosvaleriociencia1021 2 жыл бұрын
Pô Leandro!Eu, minha esposa e sobrinho não estavamos recebendo nada e ontem verifiquei que não estava inscrito! Ela tá inscrita e não veio teu video, ela vai têr que busca!! Que lindo são estes motores!!! Cassillldaaa!🙏🙏🙏👏👏👏❤Abraço pra v e 👪!!!!!!
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Que triste isso que o YT está fazendo, descrever eu não tinha notado, mas o sistema está me inscrevendo toda hora em canais que não quero, está um saco isso! Essa de não enviar notificação, isso é normal, são raros as pessoas que recebem a notificação. Na verdade você precisa entrar nas configurações do APP ou no navegador, e ativar as notificações, toda atualização o YT desativa, para justamente não enviar notificação alguma, só do interesse do sistema. O que o YT está fazendo!!! Ele está filtrando e enviando apenas vídeos tops para o consumo, assim retém a pessoa consumindo mais tempo vídeos dentro da plataforma. Leandro Wagner.
@marcosvaleriociencia1021
@marcosvaleriociencia1021 2 жыл бұрын
@@ManualdoMotorStirling valeu! Vou repassar pro meu sobrinho, ele cuida desta parte e a cada video dou 10 reais!! Fora o do final de semana pra namorar, ele mora comigo e têm 15 anos! Mas aqui eu trago no cabresto: é bença tio de manhã e antes de dormir!😊😊😊😊🙏❤❤❤
@agcxd
@agcxd 12 күн бұрын
​@@ManualdoMotorStirlingcara aonde consigo esse pequeno motor????
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Adquira o seu motor em: bit.ly/3oStnoQ, *ganhe 10% de desconto código: "Leandro"* *► ENGLISH:* Buy your engine: bit.ly/3oStnoQ, Extra 10%off code: *"Leandro"* *► INDONESIA:* Dalam deskripsi video ini, Anda akan memiliki akses ke beberapa informasi teknis tentang mesin. *► ESPAÑOL:* compre su motor: bit.ly/3oStnoQ, obtenga un código de descuento del 10%: *"Leandro"* *PORTUGUÊS:* Na descrição deste vídeo, você terá acesso diversas informações técnicas sobre o motor. *ENGLISH:* In the description of this video, you will have access to several technical information about the engine. *INDONESIA:* Menjelang akhir Agustus, saya akan melakukan review lengkap tentang mesin bensin stasioner; *ESPAÑOL:* En la descripción de este video, tendrá acceso a varias informaciones técnicas sobre el motor. *► Cautions:* - should only be handled by adults; - there is no need for lubricating oil in the crankcase; - it is mandatory to add 2% oil 2 times, mixed with gasoline; - after a few days at rest, remove the gasoline from the fuel tank; - make sure that the two 3.7 volt batteries are charged; - keep caution, to avoid serious burns from the engine exhaust, which is extremely hot, as warned in the video; - the initial start of the motor is carried out in a counterclockwise direction; - avoid leaving it running for more than 7 minutes, so as not to overheat the engine; *► Positive points:* - nice for those who like retro design; - finishing with perfect details that resemble a real engine; - the sound produced by the engine is loud and impactful; - does not require maintenance; - high performance and a lot of torque; - low battery consumption in electric ignition; - ease of starting the engine; - good stability in its operation; - does not need any adjustment; - all the metals used in its construction have good quality; *► Negative points:* - super heating from 7 minutes; I want to thank in advance, to everyone who is leaving their collaboration, both in likes, shares and comments. Leandro Wagner.
@jorgeabrahamhernandez1209
@jorgeabrahamhernandez1209 2 жыл бұрын
Toda América sería un solo país es México en un futuro próximo el idioma oficial sería en español México va ser el primer mundo México será potencia mundial vivA México querido México kzfaq.info/get/bejne/bdt6m82C27ComGg.html kzfaq.info/get/bejne/g9abltlzv7rFY4E.html kzfaq.info/get/bejne/jcqchbuXx6fRZKs.html Con amor se paga todo ❤️ con amor al pueblo Unido ❤️🇲🇽❤️ Con democracia Con capitalismo La grandeza de México Atentamente libertad 🇲🇽🌎💯🌍🇲🇽
@fafuksomrat9152
@fafuksomrat9152 2 жыл бұрын
😉😉
@iam7553
@iam7553 2 жыл бұрын
L)
@iam7553
@iam7553 2 жыл бұрын
QQ
@mdraihanchowdhury5570
@mdraihanchowdhury5570 2 жыл бұрын
Q
@Farmtractor
@Farmtractor 2 жыл бұрын
Very creative idea! Great job Leandro! 👍👍👍
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you my friend! This video took longer than I intended, but it was finally done. But the engine is awesome, I love it, it's my pet engine!
@Farmtractor
@Farmtractor 2 жыл бұрын
@@ManualdoMotorStirling Haha indeed! I am about to purchase a new engine soon. I will be looking into a new flathead model from enginediy
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
What is this engine, do you have a link?
@vijayborole2418
@vijayborole2418 2 жыл бұрын
ईस ईंजण का आरपिअम कितणा है
@vijayborole2418
@vijayborole2418 2 жыл бұрын
प्राईज किंमत रु कितणा है ईंजण का
@GranjaMascarenhas
@GranjaMascarenhas 2 жыл бұрын
Fantástico! Gostei e ver o boneco trabalhando kkkkk coitado até tomou um tombo. Parabéns, e um forte abraço, amigo.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Valeu pelo apoio amigo! Esse cara trabalhou, kkkk Leandro Wagner.
@GranjaMascarenhas
@GranjaMascarenhas 2 жыл бұрын
@@ManualdoMotorStirling kkkk
@marcelorocha5826
@marcelorocha5826 2 жыл бұрын
Fala Leandro, como vai essa força e essa criatividade, sempre em evidência hein, deve ter gastado quase um mes nesse clip, mas ficou bacana, continuando assim vai vir ar diretor de cinema, forte abraço, sucesso!
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Valeu pelo apoio Marcelo, que honra ser qualificado por você para parar direto ao cinema. Mas só para animação eu gastei 1 mês (trabalhei desde o dia 25 de novembro até 23 de Dezembro) Comecei esse vídeo em agosto de 2021 e terminei agora, kkkk Esse video trabalhei duro, mas é gratificante ver que vocês gostaram, é aí que vem minha motivação. Marcelo, gravei 286 clipes para este vídeo!!!
@akbarkeenan7754
@akbarkeenan7754 2 жыл бұрын
Bacana buku petunjuk pemakaian
@angelicasandiegocalderon7838
@angelicasandiegocalderon7838 Жыл бұрын
434
@francismso
@francismso 2 жыл бұрын
Buen video amigo, muy trabajado, bien hecho y el motor es una maravilla 👍
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hola, es muy gratificante saber que te gusto el video, muchas gracias. Siempre bienvenido al canal. Leandro Wagner.
@bhagchandmeena9735
@bhagchandmeena9735 Жыл бұрын
@@ManualdoMotorStirling दो
@TheFrog767
@TheFrog767 2 жыл бұрын
Professional video for sure well done on everything 👏👏👏🥂🙋
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.
@MrMinimum24
@MrMinimum24 2 жыл бұрын
Congratulations for Massive Success of this Video.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much, it was a very laborious video, but rewarding watching the good acceptance. Always welcome to the channel. Leandro Wagner.
@viniciusscaravelo3161
@viniciusscaravelo3161 2 жыл бұрын
Nossa eu imagino o trabalhão que foi gravar 😦 ficou sensacional! Parabéns 👏 o meu like já tá garantido😆
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
kkkkk deu sim amigo, comecei em agosto e terminei agora, kkkk Cara, raramente dá para fazer um vídeo assim, é muito demorado! Só na animação foram exatos 30 dias de serviço! Mas muito obrigado pelo seu constante apoio. Leandro Wagner.
@harunfaxre4436
@harunfaxre4436 2 жыл бұрын
@@ManualdoMotorStirling ي
@anggiakirana5313
@anggiakirana5313 Жыл бұрын
@@ManualdoMotorStirling 'TTS danclohjohny
@luluardi6826
@luluardi6826 Жыл бұрын
@@ManualdoMotorStirling xxx
@ThanhNguyen-uv1nv
@ThanhNguyen-uv1nv Жыл бұрын
@@ManualdoMotorStirling về việc 2ẻ
@walacedeoliveira1442
@walacedeoliveira1442 2 жыл бұрын
_PARABÉNS ! Eu vejo que, até que enfim, alguém descobriu para o quê serve a utilisação destas injeções !
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muito obrigado pelo elogio! Seja sempre bem vindo ao canal! Leandro Wagner.
@daleklatt1512
@daleklatt1512 2 жыл бұрын
Very nice I have some motors they are great this one is really cool thanks for sharing
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you so much for the support, I'm glad you liked it. Always welcome to the channel. Leandro Wagner.
@ashikurrahmangojol
@ashikurrahmangojol 2 жыл бұрын
One of the great legend you can go ahead bro,,, love From Bangladesh ❤️❤️❤️❤️
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you so much for your support, it's gratifying for me. Be always welcome. Leandro Wagner.
@ashikurrahmangojol
@ashikurrahmangojol 2 жыл бұрын
@@ManualdoMotorStirling ❤️❤️❤️❤️❤️😍🥰
@pimentafera1511
@pimentafera1511 2 жыл бұрын
Quanta criatividade e paciência 🤣🤣👏🏻👏🏻👍🏻
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Olá, muito obrigado, estou feliz que tenha gostado. Seja sempre bem vindo ao canal. Leandro Wagner.
@mdshoyiab8164
@mdshoyiab8164 Жыл бұрын
ভাই এটার দাম কত প্লিজ রিপ্লাই
@ramoneoliveira5851
@ramoneoliveira5851 2 жыл бұрын
Parabéns mano, um ótimo trabalho.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Estou feliz que tenha gostado e obrigado como sempre. Leandro Wagner.
@klapitall
@klapitall Жыл бұрын
I've never seen someone master so many techniques at once.
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
Thank you very much for your support. Always welcome to the channel. Leandro Wagner.
@toymakervn
@toymakervn 2 жыл бұрын
Unbelievable, exquisite details !
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Yes I agree, thank you very much for the support. Always welcome to the channel. Leandro Wagner.
@GeralNaPratica
@GeralNaPratica 2 жыл бұрын
Bela animação, esses motores são incríveis. Parabéns! 👏👏👏
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muito obrigado amigo, seja sempre bem vindo! Estou muito admirado com a riqueza de detalhes, acabamento e principalmente o alto desempenho. Estou feliz que tenha gostando da animação. Leandro Wagner.
@hirenpatel895
@hirenpatel895 2 жыл бұрын
Ghj me mnlpp ok km To Llllpp
@sergioricardodemorais7280
@sergioricardodemorais7280 2 жыл бұрын
Aonde posso comprar um motor desse
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
@@sergioricardodemorais7280 Olá Sérgio! Você pode comprar nessa página: bit.ly/3oStnoQ ► usando o código "Leandro" ganhe 10% de desconto. Para converter em reais clique no canto direito superior e converta de USD para BRL. Qualquer dúvida, pode me perguntar. Leandro Wagner.
@mdfaisalahmed6392
@mdfaisalahmed6392 2 жыл бұрын
How do I buy what I want to buy it
@nelioquintela
@nelioquintela 2 жыл бұрын
Suas produções beiram ao profissionalismo, Impecável, parabéns Leandro , muito legal , Motor muito top. Maravilhoso.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muito obrigado meu grande amigo! Você reconheceu o esmeril?? kkkk Obrigado, agora mais que nunca foi muito útil. Leandro Wagner.
@LandTruckKh
@LandTruckKh 2 жыл бұрын
Really good at thinking👍👍👍
@ythanthan6125
@ythanthan6125 Жыл бұрын
Tim
@Trang.Dapper
@Trang.Dapper 2 жыл бұрын
Amazing mini RC Tractor, i love diy
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
How cool that you liked it! Be always welcome! Leandro Wagner.
@100beamm
@100beamm 6 ай бұрын
i respect you, especially with the stop motion thing, how long did it took to make this video
@engenhocandoluisfernandoma820
@engenhocandoluisfernandoma820 2 жыл бұрын
Motores e vídeo realmente TOP! O esmeril ficou perfeito como demonstração das inúmeras possibilidades de uso...👍👍⚙⚙🖖🖖
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muito obrigado Luiz pela sua fiel presença! Cara, esse esmeril ficou violento, kkk pensa em algo forte, eu me surpreendi com o motor, não esperava tanto dele. Leandro Wagner.
@engenhocandoluisfernandoma820
@engenhocandoluisfernandoma820 2 жыл бұрын
@@ManualdoMotorStirling Era exatamente isso que tu relatou que eu queria saber, sobre o torque. Cilindro e pistão devem ser perfeitos.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
@@engenhocandoluisfernandoma820 Bom Luiz, esse motor eu não desmontei a parte do cilindro e pistão, porque percebi que era critico remontagem, além dos cuidados com a cola de silicone para não contaminar tudo e criar vazamento na compressão, ou mesmo vazamentos de água! Mas eu tenho outro motor que ainda não postei do mesmo fabricante, o anel de vedação do pistão e um o-ring por incrível que pareça, é durável. Agora o torque dele é muito alto, muito mesmo. Isso é possível devido a alta compressão do projeto, é tanta compressão que você precisa fazer um aperto absurdo das mãos sobre o volante para conseguir dar a partida. Também devido essa alta compressão, o motor esquenta rapidinho, o tanque ferve de quente depois de uns 7 minutos, ele não poderia ser nem tão potente e nem tanta compressão para evitar esse super aquecimento, mas prefiro que esquente mesmo, kkkk Caso não tenha lido a descrição, leia ela, que relatei todos os detalhes. Leandro Wagner.
@engenhocandoluisfernandoma820
@engenhocandoluisfernandoma820 2 жыл бұрын
@@ManualdoMotorStirling São jóias da Engenharia
@MrMinimum24
@MrMinimum24 2 жыл бұрын
Legend is Back with another Masterpiece
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you so much for your constant support, I'm glad you enjoyed the video. Leandro Wagner
@gazanfarkhan3684
@gazanfarkhan3684 2 жыл бұрын
रृयक्षहमभबप
@raihansk1679
@raihansk1679 2 жыл бұрын
Ami a machine
@raihansk1679
@raihansk1679 2 жыл бұрын
A machine dam koto Sitamarhi
@user-nd7nk2om3x
@user-nd7nk2om3x Жыл бұрын
@@ManualdoMotorStirling اقتصلففقص
@JawareShorts
@JawareShorts 2 жыл бұрын
Congratulation for 400k Subscribers 😀
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much for your constant support. Leandro Wagner.
@amazonicscircuitri3762
@amazonicscircuitri3762 2 жыл бұрын
It's like a diesel engine, your editing is outstanding bro, how did you do that? Haha, I am your fan
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello yes! This engine is inspired by a Diesel engine. Thank you very much for watching my video, it was really hard to produce this video, it took 6 months of work, 286 scenes that I used in this video, just the animated episode, I worked the entire month of December. But it is gratifying to read the satisfaction of those who watch. Be always welcome. Leandro Wagner.
@rafaelflunkes
@rafaelflunkes 2 жыл бұрын
Incrível! Muito legal este motor!
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Valeu meu grande amigo, estava pensando em você que nunca aparece, kkk Leandro Wagner.
@odairlonlobao9889
@odairlonlobao9889 Жыл бұрын
Muito bom! Parabéns!
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
Muito obrigado Ordairlon, estou feliz que tenha gostado do vídeo. Leandro Wagner.
@mikruson
@mikruson 2 жыл бұрын
Perfect Leandro!
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you so much for the support, I'm very happy to see you here watching one of my videos again. Always welcome to the channel. Leandro Wagner.
@HarekrishnaJaware
@HarekrishnaJaware 2 жыл бұрын
I like your video what a hardwork your doing for 1 video. Great
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello friend, thank you very much for this recognition. This video was really hard work, but it's very motivating to read comments like yours. Always welcome to the channel. Leandro Wagner.
@evolucaodamente4902
@evolucaodamente4902 2 жыл бұрын
Parabéns pelo vídeo amigo. Ganhou mais um inscrito no canal. Como você adquiriu esse motor? Abraço.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muito obrigado e seja sempre bem vindo! Este motor é meu sim, mas eu recebi de um site chinês para fazer esse vídeo rewiel, indicando o site deles para quem queria, possa comprar o seu motor. Leandro Wagner.
@RobsonMotoresCaseiros
@RobsonMotoresCaseiros 2 жыл бұрын
Amigo tá top de mais esse vídeo e a animação ficou muito boa. gostei do esmeril que você vez pra usar no motor 4t ficou perfeito e funciona muito bem. com certeza esse e um dos melhores vídeos que você já fez gostei de mais amigo parabéns 👏👏
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Obrigado meu grande amigo Robson, estou feliz que o video tenha te agrado! O esmeril ficou violento, quase ralei o coro fora ao amolar o facão, kkkk foi feio a coisa, kkk me distraí olhando para a tela da câmera e já era!!! Estou tendo um resultado satisfatório, acredito que vai dar certo. Leandro Wagner.
@steam212
@steam212 2 жыл бұрын
Hi, I just uploaded a video on a model m12b engine from Stirling kit, I think this is the same engine sitting in a different orientation. Great video! Thank you
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello, this M12 model of yours vertically, it is 2.6cc, this engine in the video is 3.5cc. The power difference is big. I have another M16 engine vertically, which I haven't finished the video yet, this is 1.6cc, but the engine power is extremely weak. Always welcome to the channel. Leandro Wagner.
@machineryworking4589
@machineryworking4589 2 жыл бұрын
Nice ❤ to see your channel video I am also Working on the actual use of the engine
@Javaw-8
@Javaw-8 2 жыл бұрын
Cara vc é incrível eu amo esse motores que vc trás no canal
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Fico feliz em saber. Seja sempre bem vindo ao canal. Leandro Wagner.
@rildomelo834
@rildomelo834 2 жыл бұрын
legal em breve eletrosdomesticos já vem com sua própria energia continua esse é um passo grande um motor elétrico desse tamanho com baterias autoregarregando é a solução
@Paulo_Ricardo_709
@Paulo_Ricardo_709 2 жыл бұрын
Muito bom leandro belo trabalho e dedicação,lindo video,forte abraço!😊
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Olá! É muito gratificante saber que vocês gostaram do vídeo, muito obrigado. Seja sempre bem vindo ao canal. Leandro Wagner.
@persimon6598
@persimon6598 2 жыл бұрын
Great little engine!👏👏👏
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you for your visit. Always welcome to the channel. Leandro Wagner.
@Brico-Relax
@Brico-Relax 2 жыл бұрын
Me encantan tus motores son chulísimos y las animaciones también saludos compañero 👍
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muchas gracias por su apoyo y su suscripción a mi canal. Me encanta este motor, es muy perfecto, me alegra que te haya gustado la animación, confieso que trabajé más de 30 días en toda la animación. Sea siempre bienvenido. Leandro Wagner
@ddk117natugumo7
@ddk117natugumo7 2 жыл бұрын
昔の日本の田舎で普通な光景であったが稲の脱穀に使っていたエンジンを思い出す様な形だね
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
はい、このエンジンはディーゼルエンジンのレプリカであり、アジア全体で非常に一般的です。 常にチャンネルへようこそ。 Leandro Wagner
@lefrederico9952
@lefrederico9952 2 жыл бұрын
Até da pra amolar coisas, que foda mano
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Olá, é muito gratificante saber que você gostou do vídeo, muito obrigado. Seja sempre bem vindo ao canal. Leandro Wagner.
@shamasali6337
@shamasali6337 Жыл бұрын
Excellent work
@tista2399
@tista2399 2 жыл бұрын
what a beautifull engine, regards from indonesia
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.
@projetosdebancada7715
@projetosdebancada7715 2 жыл бұрын
Belíssimo trabalho meu amigo, dá pra imaginar o tamanho do empenho e dedicação que você teve pra nós entregar uma grande produção dessas. Agora duas duvidas, qual a função do pequeno ímã atrás da parte rotatória do motor, e sobre o protagonista principal do vídeo (boneco), ele tem um nome? rsrs
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muito obrigado pelas observações! Esse imã no volante, serve para ativar o sensor que está lá em baixo do volante, quando o imã passa pelo sensor, é ativado uma centelha para a vela. kkk o boneco é um individuo não identificado, kkk Muito chamam ele te Thor!!! Leandro Wagner.
@qalibmammadov9788
@qalibmammadov9788 2 жыл бұрын
@@ManualdoMotorStirling ğğ
@LISZT369
@LISZT369 2 жыл бұрын
Faz um cabo de guerra entre o trator e o tanque 🙂
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Obrigado pela sugestão, mas coitado do trator, o tanque vira o trator do avexo, kkkk para o tanque não tem que possa bater, ele é muito forte! Seja sempre bem vindo ao canal. Leandro Wagner.
@hw0972100628
@hw0972100628 2 жыл бұрын
太有才了,很厲害,很想跟你交流。
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
非常感謝您觀看我的視頻,請問您有什麼問題? 隨時歡迎來到頻道。 萊安德羅·瓦格納。
@mdabdulhannan2722
@mdabdulhannan2722 8 ай бұрын
Bro what is the price of this engine
@marcosvieira3784
@marcosvieira3784 2 жыл бұрын
Quero um, onde comprar.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Olá Marcos! Você pode comprar este motor nessa página: bit.ly/3oStnoQ ► usando o código "Leandro" ganhe 10% de desconto. O valor está em dólar, mas no canto superior direito, tem a opção BRL para converter em reais. O motor é de fabricação chinesa, rico em detalhes, e com um prefeito funcionamento, tanto que vibra muito pouco se não fosse tão bem balanceado, este motivos encarecem o produto, pois também é montado de uma forma artesanal. Qualquer dúvida, pode me perguntar. Leandro Wagner.
@la_2elah_2ela_allah
@la_2elah_2ela_allah 2 жыл бұрын
لا إله إلا الله. محمد رسول الله La Elah Ela Allah. Mohamed Rasol Allah إنا لله وإنا إليه راجعون..سبحانك ياربنا ياعظيم ياخلاق يارحمن يارحيم ياعفو ياكريم ياحي ياقيوم يا{.الله.} Please Translate This Word's.. أستغفر الله العظيم الحليم الحي القيوم وأتوب إليه. ربنا لا إله إلا أنت سبحانك سمعنا وأطعنا غفرانك ربنا وإليك المصير. سبحان الله. الحمد لله. لا إله إلا الله. الله أكبر. لا حول ولا قوة لنا إلا بالله العلي العظيم. أستغفر الله لي ولكم. حسبنا الله ونعم الوكيل. وصل على نبي الله محمد. عدد خلقه ورضا نفسه وزنة عرشه ومداد كلماته وملئ موازينه لكل المؤمنين إلى يوم الدين سبحانك ربنا آمنا بك وبعظمة سلطانك اللهم تقبل دعاء. Please Translate English.May God Help You.
@renatoaugusto3960
@renatoaugusto3960 2 жыл бұрын
Cara parabéns pelo seu vídeo, ficou muito legal essa edição com o trator o boneco e tudo mais... Mas é sério que esse motorzinho custa 2.300 contos?
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Obrigado, é muito motivador ler comentários como esse! Renato, é sério mesmo, custa realmente 2.300,00. Olha, eu tento entender porque tão caro, mas eu no ramo dessas miniaturas, nem faria por essa valor. Primeiramente custo a entender, como o cara construiu esse motor, teve a capacidade de fazer dois balancim, imitado um real e o motor praticamente não vibrar!!! isso é algo que eu não entendo!! Ele passou dois anos desenvolvendo esse motor. A maior dificuldade desses projetos, não é fazer funcionar, mas sim fazer um desenho real e aí funcionar, você tem dois problemas. Mas sem justificar o preço, penso que o fabricante é ainda a pessoa que menos ganha nesse motor, já o atravessador, transporte devem ficar com boa parte desse valor. O fabricante tem todo o custo de fabricação, além de uma montagem manual, não é feito em larga escala, o que também encarece o motor. Mas mesmo os motores mini nitros, eles também são caros. O motor é caro, mas lindo demais, muito violento, alta taxa de compressão, acabamento incrível, e um desenho incrível, cheio de detalhes que nunca imaginei ver em miniatura.
@m.danishdanish260
@m.danishdanish260 Жыл бұрын
Ek mujhe de
@user-ur2ki1yj7e
@user-ur2ki1yj7e 2 жыл бұрын
Класс спасибо большое я бы не отказался от такого и даже приобрёл себе но наверное не возможно купить такую вещь
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Спасибо большое за вашу поддержку. Всегда добро пожаловать на канал. Леандро Вагнер.
@mikemarley7427
@mikemarley7427 Жыл бұрын
Where can i order this engine
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
Hello friend! This engine can be purchased with this link: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. As it is sold in dollars, use PayPal to make the payment, to convert from your currency to dollars. Any questions, you can ask me. Leandro Wagner.
@snsagorsn590
@snsagorsn590 Жыл бұрын
ha
@merajulislamridoy7616
@merajulislamridoy7616 Жыл бұрын
@@ManualdoMotorStirlingHow Price
@delowarhossain7193
@delowarhossain7193 Жыл бұрын
@@snsagorsn590 q1qaqaq
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
@@merajulislamridoy7616 Hello friend! This engine can be purchased with this link: bit.ly/3oStnoQ ► using code "Leandro" get 10% off. As it is sold in dollars, use PayPal to make the payment, to convert from your currency to dollars. Any questions, you can ask me. Leandro Wagner.
@user-vs8nd8rl8m
@user-vs8nd8rl8m 2 жыл бұрын
👍👏👏👏👏🧠
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
شكرا جزيلا لدعمكم. مرحبًا بك دائمًا في القناة. لياندرو واجنر.
@brentsmith5647
@brentsmith5647 Жыл бұрын
Brilliant video thank you 😍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
Thank you very much for your support. Always welcome to the channel. Leandro Wagner.
@markbecker8661
@markbecker8661 2 жыл бұрын
Great animation, really 😎
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.
@the.gods.sing.in.sweet.dreeams
@the.gods.sing.in.sweet.dreeams 2 жыл бұрын
Bu kadar emek var ve çok güzel.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Merhaba, çok teşekkür ederim, beğenmenize sevindim. Kanala hoş geldiniz. Leandro Wagner.
@mdaslammasallah5777
@mdaslammasallah5777 6 ай бұрын
veri good this Engine ❤
@thichphuocnang177
@thichphuocnang177 2 жыл бұрын
Oh, my Buddha! ha ha. Tôi đã không thể ngậm miệng, mà phải há hốc mồm, toét miệng cười từ đầu tới cuối. Thật là tí hon, thú vị và tài tình.
@marianroco5642
@marianroco5642 3 ай бұрын
Wow,genial clip,success
@syedraihanmahmud3136
@syedraihanmahmud3136 2 жыл бұрын
Animation was very good
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much for your support. Always welcome to the channel. Leandro Wagner.
@whoisme678
@whoisme678 2 жыл бұрын
It's a very good miniature tractor, but what can you set ablaze with the fire 🔥 at the front ?🤔 👍
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
This is a necessary care, for this reason it should not be handled by children, only by adults. Always welcome to the channel. Leandro Wagner.
@dz-abouttechnique1849
@dz-abouttechnique1849 2 жыл бұрын
Excellent video!
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.
@roedycalm1155
@roedycalm1155 2 жыл бұрын
Wow... istimewa
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Halo, sangat menyenangkan mengetahui bahwa Anda menyukai videonya, terima kasih banyak. Selalu selamat datang di saluran. Leandro Wagner.
@cindywieczorek5608
@cindywieczorek5608 Жыл бұрын
Nice, atleast yours runs, when I bought a smaller golden one it wouldn’t even start and was falling apart 😢
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
What model did you buy? I have another M16B model, it's smaller, this one doesn't start easily and I had a problem when it arrived, I had to make several adjustments to adapt to my warmer climate and the type of gasoline we have here. Leandro.
@rcdoebbora8086
@rcdoebbora8086 Жыл бұрын
Amazing 👍
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.
@LandTruckKh
@LandTruckKh 2 жыл бұрын
Really good at thinking
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much for your support. Always welcome to the channel. Leandro Wagner.
@LandTruckKh
@LandTruckKh 2 жыл бұрын
Very good
@titanthemachine5563
@titanthemachine5563 Жыл бұрын
The tank was awesome
@pensamaquina4777
@pensamaquina4777 2 жыл бұрын
Que vídeo caprichado !!!!¡
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Nossa! Obrigado, muito motivador. Seja sempre bem vindo. Leandro Wagner.
@fancyfarming6826
@fancyfarming6826 2 жыл бұрын
Nice video very creative idea I follow your video
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much, it is motivating to know that you enjoyed the video. Always welcome to the channel! Leandro Wagner.
@teco2645
@teco2645 2 жыл бұрын
Wah sangat mantap sekali mesin itu yang semangat trus moga sukses selalu hadir menyimak
@knobsdialsandbuttons
@knobsdialsandbuttons 2 жыл бұрын
Awesome job !, very well done 👍👍
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Wow, I was very motivated by your comment, thank you very much. Be always welcome. Leandro Wagner.
@knobsdialsandbuttons
@knobsdialsandbuttons 2 жыл бұрын
@@ManualdoMotorStirling You're welcome ! :)
@russchadwell
@russchadwell 2 жыл бұрын
Is it possible to replicate in miniature that 28 piston aircraft engine from like 1948 or around then? The R-4360 Wasp Major or something like that.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Yes, it is possible! But I find it very difficult for someone to have that courage, it would be a project of years studying and putting together. Always welcome to the channel. Leandro Wagner.
@russchadwell
@russchadwell 2 жыл бұрын
@@ManualdoMotorStirling that would be cool! If you accomplished that you'd be in history, personally, for 1,000 years!!
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much for your support.
@russchadwell
@russchadwell 2 жыл бұрын
@@ManualdoMotorStirling but, many might say it was merely 3D printed and not so great. So, today, such challenges are seemingly less appealing to attempt, I suppose. You're welcome.
@user-eb6qu7mp4x
@user-eb6qu7mp4x 2 жыл бұрын
Надо его в самокат ещё внедрить.. И посмотреть как тянет.. 😎
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Привет, большое спасибо, я рад, что вам понравилось. Добро пожаловать на канал. Леандро Вагнер.
@aqiladinan23
@aqiladinan23 2 жыл бұрын
Nice bro 👍
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much for your support. Always welcome to the channel. Leandro Wagner.
@jefferysilzer6413
@jefferysilzer6413 2 жыл бұрын
God bless my brother in Christ!!
@mobilfardi9273
@mobilfardi9273 2 жыл бұрын
Amazing video
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much for your support! Leandro Wagner.
@user-fo4jq8uf1e
@user-fo4jq8uf1e 8 ай бұрын
Nice video
@hattafauzansyakur3980
@hattafauzansyakur3980 2 жыл бұрын
Woowww super super very amazinkkkk. I like your idea sir.🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello, it is very gratifying to know that you liked the video, thank you very much. Always welcome to the channel. Leandro Wagner.
@magicgear
@magicgear 2 жыл бұрын
정말 환상적인 테스트 영상이네요. 최고입니다.^^👍
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
앗, 정말 감사합니다. 이런 댓글을 읽는 것은 큰 힘이 됩니다! 항상 환영합니다! 레안드로 와그너.
@ramoneoliveira5851
@ramoneoliveira5851 2 жыл бұрын
Eu tenho que perguntar. Quanto tempo vc levou pra fazer essa animação ????
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
kkk, bem observado! Comecei no dia 27 de novembro e finalizei em 23 de Dezembro. Muito demorado, todo o vídeo foi demorado, pois ainda estou em um processo de aprendizado. Leandro Wagner.
@edmilsonferreira2196
@edmilsonferreira2196 2 жыл бұрын
O vídeo ficou muito divertido esse motorzinho é uma belezinha obrigado por compartilhar
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muito obrigado Edmilson, pessoalmente o motor também é muito lindo e absurdamente forte para o seu tamanho. O que mais me encanta nele, são os detalhes fieis de um motor de verdade e ainda funciona bem. Leandro Wagner.
@JawareShorts
@JawareShorts 2 жыл бұрын
I made a test tube thermocoustic engine with 1 cylinder. All parts are perfect .Engine is frictionless. But it will not work. What can I do please reply. I used small candle 🕯️
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello, you have chosen to make the engine more difficult to run, I do not recommend this engine. 1 - First, what is the video tutorial that you based on your project?? 2 - what material did you use to make the piston?? Because the only way this model works is using a piston made with a glass syringe, there are some videos that used other material, but it's fake, it doesn't work. 4 - A spark plug is little heat for this type of engine. Leandro Wagner.
@JawareShorts
@JawareShorts 2 жыл бұрын
I watch video from channel (liberman) (grain). I used aluminium capacitor as a piston like you used in one of your video.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
@@JawareShorts Hi, I figured you had made an engine using the "liberman" video. I was super outraged when I saw that video, because I've made several types of engines and that engine would never work, I claim that video has a hidden electric motor. ► To prove what I'm saying, a Stirling engine of this model, never starts running at full speed, it even starts, but it needs to run it before, in addition to being very hot. ► Also when the engine stops running, it cannot suddenly stop running. Due to the heat, it remains running for a while and gradually loses speed. ► Watch this video of mine how the engine works: kzfaq.info/get/bejne/aKl5q9SI2LSYk4E.html ► note that before starting, the flywheel rotates back and forth, this happens in this engine model. It also works in both rotational directions. ► See this other engine I made: kzfaq.info/get/bejne/l8xpf9KYltavonk.html ► barely works, because there is a little friction in the piston and it is a design that the test tube needs to have an exact length and diameter, to give a thermal balance in the engine. ► If the "liberman" thinks I'm defaming his career, I challenge him to show the engine in front of me, and I will pay all the cost of this challenge, but I'm sure it's fake. This "liberman" motor is full of parts that produce friction, to start the shaft bearings, only with that type of traditional bearing the motor would not even work, I use special low friction bearings. His engine's connecting rods are full of play, another reason it won't work. His piston is far from perfect, full of air leakage, yet another reason it won't work. ► The capacitor piston only works when the motor has a second piston all made of steel, as the sealing of a capacitor piston will never be perfect, like a glass syringe. ► This motor that you made, only works with a glass syringe piston, or a piston made of graphite, to guarantee the perfect seal and thus the perfect compression, because it needs a good seal to work and no friction. ► I recommend following one of my canned motor tutorials, preferably the steel wool inner piston motor and balloon outer piston. Leandro Wagner.
@JawareShorts
@JawareShorts 2 жыл бұрын
@@ManualdoMotorStirling you are true youtuber. Because you help your subscribers. thanks for your help.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
@@JawareShorts Unfortunately, because I don't have time, I can't answer everyone anymore, but special cases like yours, I give priority. I have two channels, which takes up a lot of my time. I'm glad I was able to help you. Try to make this engine, the chance of working is much higher: kzfaq.info/get/bejne/n9qKd9x_rNa-hqc.html
@mickcarson8504
@mickcarson8504 2 жыл бұрын
I wonder if I can use this engine for my 6 feet long model Ferry boat. 🤔
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
It works for your boat, but I don't recommend it. Because the engine has a long-term use limitation due to overheating and a fuel tank allows only 8ml of fuel, which limits the engine running to 6 minutes. Always welcome to the channel. Leandro Wagner.
@mickcarson8504
@mickcarson8504 2 жыл бұрын
@@ManualdoMotorStirling Can't it be water cooled, with a pump that cools the engine while it is idling because it has a centrifugal clutch? With the engine running on idle, the clutch is not engaged, this allows the pump to keep in-taking the water, sends it through the engine and back out the boat.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
@@mickcarson8504 Yes, you can make this adaptation to solve the overheating problem. But as I told you, the fuel tank capacity is limited to 8ml, where the engine will run for about 5 to 7 minutes.
@thonayunpa8170
@thonayunpa8170 2 жыл бұрын
Cảm ơn bạn đã chia sẻ video này, mình ủng hộ bạn
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Xin chào, rất vui khi biết rằng bạn thích video, cảm ơn bạn rất nhiều. Luôn chào mừng các bạn đến với kênh. Leandro Wagner.
@poweredbysergey
@poweredbysergey 2 жыл бұрын
Nice catoons :)
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you so much for watching another video of mine! Leandro Wagner.
@user-vv1sc6ne7r
@user-vv1sc6ne7r 2 жыл бұрын
これは凄いエンジンだぁ😀
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
こんにちは、あなたがビデオを気に入ったことを知ってとてもうれしく思います、どうもありがとうございました。 常にチャンネルへようこそ。 Leandro Wagner
@marlonbriceno2112
@marlonbriceno2112 2 жыл бұрын
Muy bueno bonito motor de gasolina.saludos
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Muchas gracias por tu apoyo. Sea siempre bienvenido. Leandro Wagner
@andrzej3511
@andrzej3511 2 жыл бұрын
Przyjeżdża na stację paliw krasnoludek swoim samochodzikiem z takim właśnie silnikiem i powiada do kolesia przy pompie: - poproszę naparstek benzyny i trzy krople oleju. Zniecierpliwiony koleś przy pompie: - i co jeszcze, może pierdnąć w oponki?
@karam5958
@karam5958 Жыл бұрын
استمر يا بطل
@aldibragi5015
@aldibragi5015 2 жыл бұрын
Great job
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Thank you very much for your support. Always welcome to the channel. Leandro Wagner.
@canaljb8748
@canaljb8748 2 жыл бұрын
Muito bom as animações, parabéns vídeo ficou legal e criativo.
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Valeu amigo por me acompanhar a tantos anos! Estou feliz que deixe-o satisfeito. Leandro Wagner.
@canaljb8748
@canaljb8748 2 жыл бұрын
@@ManualdoMotorStirling Eu que agradeço por sempre me responder, forte abraço e sucesso.
@Traktor_Ngawi
@Traktor_Ngawi Жыл бұрын
Luar biasa karya yang bagus 👍😍sukses dan sehat selalu teman 🤲 salam kenal 🤝🙏
@jerimiahchaney829
@jerimiahchaney829 2 жыл бұрын
That's bad ass bro
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Hello friend, thank you very much for this recognition, it is very motivating to read comments like yours. Always welcome to the channel. Leandro Wagner.
@fahrurrozigat
@fahrurrozigat 2 жыл бұрын
Semoga sehat selalu mas aminnn
@musicloverscreation7062
@musicloverscreation7062 2 жыл бұрын
Love from India 💕💕💕
@mr.designer6211
@mr.designer6211 Жыл бұрын
Hi dear friend . This video is very beautiful and spectacular. You are a real engineer. I also make videos and I know how hard you work to make a video. Good luck . Thank You
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
Hi, thank you very much for visiting! Yes, the video was a lot of work, there are more than 300 scenes I filmed for this video, which gave me 4 months of service. But the most important thing is to see the satisfaction of the people who watch. Always welcome to the channel. Leandro Wagner.
@mr.designer6211
@mr.designer6211 Жыл бұрын
@@ManualdoMotorStirling Hello my dear friend . I am very happy to meet you. Always be successful and victorious.
@leonardosegatto9757
@leonardosegatto9757 Жыл бұрын
esse motor eu gostei muito o funcionamento e força que ele tem eu queria ter um dia um desse modelo cison
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
Olá Leonardo! Esse motor é um dos meus prediletos! Adoro ele, infelizmente para nós brasileiros é caro. O único problema que esse motor aqui, esquenta demais, não tem como deixar ele funcionando por longas durações, até a cor vermelha vai desbotar com o tempo se deixar aquecer demais. O motor te uma taxa de compressão muito alta, por isso esquenta e tem força acima da média. Em 2 meses, vou postar um vídeo de um motor modelo antigo, 4 cilindros, 12cc no total, a gasolina e baixa rotação, ele pesa 3,5kg. Muito lindo ele. Este modelo de motor que comentei foi muito usado na 2° Guerra mundial. Já para o fim do ano, pretendo postar um vídeo de um mini trator antigo esteira, com motor a gasolina, 1,9 cc e farei uma aventura com ele em uma paisagem natural. Seja sempre bem vindo! Leandro Wagner.
@leonardosegatto9757
@leonardosegatto9757 Жыл бұрын
@@ManualdoMotorStirling BA ESSE MOTOR 4 CILINDROS NÃO É UM HOLT POR QUE ESSE MOTOR É UM MODELO TAMBEM ANTIGO
@leonardosegatto9757
@leonardosegatto9757 Жыл бұрын
@@ManualdoMotorStirling MAIS TU SABE DUM MODELO MINI QUE SEJA BOM DE UM CILINDRO
@leonardosegatto9757
@leonardosegatto9757 Жыл бұрын
@@ManualdoMotorStirling QUE SEJA ADIESEL
@ManualdoMotorStirling
@ManualdoMotorStirling Жыл бұрын
@@leonardosegatto9757 Boa, você entende de motor em!!! Sim, eu tenho um Holt 75, é esse mesmo! Tem até um controlador de rotação por inércia, conforme vai aplicando carga no motor, ele acelera automaticamente. Eu sou de Venâncio Aires.
@josemanoelsilva2067
@josemanoelsilva2067 2 жыл бұрын
Olá!! amigo isso é incrível !!! Qual o preço desse motor ? É pra venda ou não? Você é um profissional, um fabricante excelente. Parabéns!!!
@ManualdoMotorStirling
@ManualdoMotorStirling 2 жыл бұрын
Olá José! ► Este motor, trator e tanque, são de fabricação chinesa, apenas produzo os vídeos para promover a venda desses produtos, eu não tenho ferramentas para fabricar tais produtos neste momento. ► Você consegue comprar qualquer um desses produtos nessa página: bit.ly/3oStnoQ ► usando o código "Leandro" ganhe 10% de desconto. ► No topo direito da página, é possível converter de dólar "USD" para real "BRL". ► Mas este ano vou construir grandes novidades, aguarde! Qualquer dúvida, pode me perguntar. Leandro Wagner.
@ShabbirAhmed-dr6yt
@ShabbirAhmed-dr6yt Жыл бұрын
I like dis..good technology
( THE SOLUTION TO PRODUCE ELECTRICITY AT HOME ) How to make a steam engine, COMPLETE TUTORIAL.
9:14
Manual do Motor Stirling - Leandro Wagner
Рет қаралды 10 МЛН
When Mechanics Lose Their Minds
8:00
DIY Garage
Рет қаралды 4,5 МЛН
Суд над Бишимбаевым. 24 апреля | ОНЛАЙН
7:26:50
FOOTBALL WITH PLAY BUTTONS ▶️ #roadto100million
00:24
Celine Dept
Рет қаралды 125 МЛН
NO NO NO YES! (Fight SANTA CLAUS) #shorts
00:41
PANDA BOI
Рет қаралды 55 МЛН
Building a V8 Engine Model Kit - Full Metal Car Engine Model Kit
18:10
kota scale model
Рет қаралды 4,9 МЛН
Amazing Mini Tools made with recyclable materials
16:12
Inventus
Рет қаралды 7 МЛН
Self Unboxing Steampunk Engine - Mini 4-Stroke Engine
4:40
DIY Garage
Рет қаралды 8 МЛН
Finishing & Running the 2 ROTOR Wankel RC!
15:36
JohnnyQ90
Рет қаралды 8 МЛН
Making a 2.4cc Petrol (Gasoline) Engine
15:24
Maker B
Рет қаралды 6 МЛН
How I Made A Thruster With 3 Brushless Motors 🚀🔥
19:11
YST-DIY YÊU SÁNG TẠO
Рет қаралды 2,9 МЛН
How to Make a DIY Projector
9:07
Simple Technic
Рет қаралды 19 МЛН
( MINI SANDERS ) WITH GASOLINE ENGIN, 4 stroke and world's simplest heat engine!
2:55
Manual do Motor Stirling - Leandro Wagner
Рет қаралды 610 М.
Как открыть дверь в Jaecoo J8? Удобно?🤔😊
0:27
Суворкин Сергей
Рет қаралды 817 М.
Which Phone Unlock Code Will You Choose? 🤔️
0:12
Game9bit
Рет қаралды 5 МЛН
iPhone 15 в реальной жизни
20:03
HUDAKOV
Рет қаралды 669 М.
phone charge game #viral #tranding #new #reels
0:18
YODHA GAMING RAAS
Рет қаралды 6 МЛН