Unbox & Install Powermadd Handguard Mirror Kit for a Polaris Sportsman Highlifter 1000

No video

Unbox & Install Powermadd Handguard Mirror Kit for a Polaris Sportsman Highlifter 1000

Рет қаралды 22,893

7 жыл бұрын

Unboxing and Installing PowerMadd's Mirror kit for their Sentinel Handguards for Polaris Sportsman Highlifter 1000
Thanks for watching my videos, subscribing and supporting Ricky's Garage Vibes. If you want to see any specific upgrades, products, trail or obstacle runs or anything else, let me know in the comments.
LINK to the PowerMadd's Mirror kit:
amzn.to/2GkryLd

Пікірлер: 23

@Deerector 7 жыл бұрын

just bought the hand guards, mounts, mirrors and lights thanks to you bro. I didn't even know they made this!!!! I love it...I hope I don't have a hard time with the wiring. Im not really too electrically inclined lol

@RickysGarageVibes 7 жыл бұрын

Deerector best news I heard today! I'm here if you need a hand

@Deerector 7 жыл бұрын

Ricky's Garage Vibes thank u so much. I'm sure I will def need spent tips when I put them on. 👌🏼

@DjSkipAlexander 6 жыл бұрын

Thanks Ricky I’m just looking at it also. Thanks for the video they look great. Have you thought of getting the extenders, it’s a foam surround that fits on the guards and gives you double the protection from with and rain.

@RickysGarageVibes 6 жыл бұрын

No problem man, didn't think Id enjoy making vids as much as I am. I haven't looked at the foam surrounds but it sounds like something I'd use ... I'll check it out. There is a way to mod the hand guard lights with a regulator type thing. Im looking into it and Ill post a video

@piedrudopiedro8151 6 жыл бұрын

Yes !

@mariomota9075 4 жыл бұрын

After watch your videos about powermadd im thinking buy them to for monting in my brute force 300.

@RickysGarageVibes 4 жыл бұрын

You’ll love it 🤝

@mariomota9075 4 жыл бұрын

Alredy bougth orange and black

@RickysGarageVibes 4 жыл бұрын

Perfect!

@JohnVeitch1 6 жыл бұрын

do those mirrors stay locked in place when on a rough trail?

@RickysGarageVibes 6 жыл бұрын

Danger Ranger they don’t slip, they stay where you put them ... I would take them off and tell you guys if they didn’t

@JohnVeitch1 6 жыл бұрын

I'm meant do they stay in the up position

@Deerector 7 жыл бұрын

Hey my man, ok so like I said, I have questions lol. Wondering if u can help me with this issue. I got front and rear led lights on my keyed power. I got a horn, front hand warmers, rear hand warmers and a thumb warmer. All on the same line. Even the Powermadd led hand gaurds. The 20 amp accessory fuse blew twice on me. Obviously that's the fuse for all the above. So I'm trying to figure out what is making it blow. Which one. If any specifically. Cuz the weird thing is, it blew twice randomly. Nothing was even on. So then I put another 20 amp fuse in and slowly put everything on one at a time to see what blows it. I eventually had every electric accessory running on the entire quad for over and hour and it didn't blow. So I can't figure out why it's blowing but won't blow when everything is on. I even turned things on and off over and over. Including the ignition. Nothing. Any ideas where to go from here? Also I know u shouldn't really throw in a bigger fuse but I was thinking maybe a 25amp. I would think it's still safe. Wdu think? Thanks in advance. And I'll post a vid soon.

@RickysGarageVibes 7 жыл бұрын

Deerector I'm not a pro but here's my opinion: the front and rear lights should be on its own fuse, the horn on its own fuse, both hand warmers on its own 1 fuse and the handguard lights should be on its own fuse. I can go into why but to keep this short its so you don't lose everything at once and the wires won't run hot. Cut the positive wire and put a fuse in between the cut. The main wire from the battery should be the thickest wire. Ask me anything else you need.

@Deerector 7 жыл бұрын

Ricky's Garage Vibes hey thank u for getting back to me. Ok so I'm a little unclear on ur recommendation. Your saying run each accessory directly to the battery, and put a fuse on each one of those lines going to the battery?

@RickysGarageVibes 7 жыл бұрын

no problem. there are two main wires coming from the battery (1 positive, 1 negative). On the positive red wire, between the battery and the component, cut the red wire and put a fuse. A fuse for the horn, one for both front/rear lights, one for both handwarmers and one for the hand guards lights. Ill put together a vid to show you what I mean

@Deerector 7 жыл бұрын

Ricky's Garage Vibes wow that would be great. I've always had quads but never did any upgrades. There are so much nice stuff out there and really wanna take advantage of it. And I wanna do it myself rather than pay through the nose. Thank u so much for the vid. But don't go crazy. I know these things take time.