OMG! My grandmother had exactly the same one. I actually learned to sew on this machine as a teenager! I was a lovely machine!

Yes, the delight on your face proves this was the right purchase for you. The right...FIRST....purchase. Good luck. Addictions can be very hard to break. ;)

Welcome to the VSM club😊 I bought a Singer 128 from 1931 at the beginning of the year and I said I'd only get one. But now I have four. My favourite and main one is a Singer 66 with lotus design from 1913 and she's my go to as she's so heavy and sturdy and does a lovely stitch. I just love the feeling that I have a functional bit of history. I'm sure you'll love using your new old machine and you can go as fast or slow as you want which really helps with precision sewing. That item that you showed with the feet. That's your seam guide and it attaches to the machine bed with the screw and you set it to your desired seam allowence. tomofholland.com/2012/12/18/singer-201-attachments-revisited/amp/

Did you do that on purpose? The Doctor is using a sonic screwdriver.

+

That’s what the seemingly random screw goes with!

Yup. Had one of those on my mother's first Singer machine. She is a beautiful piece of history, enjoy!

Thank you, I have an old Standard machine, dont know the year but its also a vibrating shuttle, anyways thank you as i have that part (minus its screw) and it has been confusing me since I got the thing.

It's my favorite kind of seam guide. 👍👍

windycitydreaming We're oversized children who haven't lost the capacity for joy in the simple pleasures. The sound of that sewing machine reminded me of the older trains starting out of the station at the beginning of a journey (when I was very small). So soothing and relaxing... but with a little bit of excitement for the end of trip.

@windcity Agreed. True joy is captivating to watch and contagious as all get out.

LOL! Absolutely great!

I , too, have sewn on a Pfaff 7570, for at least 25 years, before getting a treadle machine:) loving my treadle made in 1897:) I go between the two:) I just rearranged my sewing room to accommodate being able to make use of both of them:) thank you for your video:)♥️

Lol🥰

Singer is actually American and the family moved to England. They had a mansion in Paignton, Devon, England but I think the national Trust now look after it. 😊

@@mayacooke7843 thank you for that information. I wonder why I thought it was German. Maybe because everyone had one, where I grew up

That was my favorite part!!

I don't know if this would help in your specific situation but vintage machines were also offered with knee bar operation, so you just gently push your knee out a little to the right to activate the motor. I prefer these instead of foot pedals because they are more ergonomical. Don't know why they got rid of them...

@@stefanleenaars9698 That sounds quite good, I wouldn't be able to use that but it does sound good for people with join problems. My older machine has a weird sort or ring/trigger that plugs into the power output on the machine so you can sort of use your second hand minus the thumb. The newer one I have does not have this, is just has an on and off button which does not have the same nuanced control as my older one. They also stopped making those too, I think the expense of these speciality machines was not sustainable for the company when they can sell machines that work ok for everyone. Bit of a shame.

My friend has a sewing machine that basically sews on it's own. Something like that might be helpful if you have room in the budget for a new machine. IIRC it wasn't cheap. Hers is a modern one, but it has a start/stop button on the front so you push the button once to start sewing and the machine will just continue to sew (allowing you to use both hands on the fabric) until you push the button again to stop it. Apparently it's a common feature on computerized machines these days so it might be less expensive now than it was when she got hers. I couldn't remember what it was called so I googled and found this blog post that elaborates on the concept. Apparently some machines with this feature also have speed settings so you don't need to worry about your machine going too fast while you get used to it. I've wanted a machine like that for ages, but have never had room in my budget to buy one so just make do with one hand on the pedal like you do or my old hand crank machine lol It would be super cool IMO if someone could figure out how to link one of these machines with the start/stop button to an amazon echo or siri or something so you could use voice commands to start and stop the machine. One can dream... Here's the blog post in case it's helpful :) www.thesewingdirectory.co.uk/sewing-without-a-foot-pedal/

@@crazywoollady9325 Oh yeah this is the exact type of machine I have now with the stop start and speed control. It's pretty good still migg my old trigger one but these new ones are useful for lots of different people so I am pleased they are around, but yeah the cheapest I had seen around was $500 or so. Thanks for the blogpost!

Someone needs to invent a sewing machine for people in wheelchairs because I'm sick of realising some many things are able'ist

This warmed my heart

It is a drill. But instead of a drill bit inserted, she has a screw driver attachment. ❤🌅🌵😷

Probably named a universal, or multi tool.

@@suzisaintjames That, or an impact driver which is better for screwing things down whereas a drill is better for making holes 🤓☺️

@@catherinejustcatherine1778 , a multi tool is a bit different... it moves the blade back and forth instead of round and round. Angela is right it's either a drill or a impact driver. 💖🌞🌵😷🎅

@@suzisaintjames Ok, good to know.

I have one of these, sadly not yet restored - though it was electrified in the 1930’s it can be returned to its original state - but my goodness it is such a large thing to move. It is a cabinet model Singer from 1906 and a beautiful piece of furniture when not in use. Well it has been unused for many decades now and needs something more expert than my hands can provide. I learned on a pre-war Singer hand machine, but graduating to an antique treadle machine, and they are fabulous for leg exercise! And much nicer than an electric machine if you have a lot of sewing to do. No sliding foot pedal! Both legs get a workout! I hope you manage to find one you like, you can get a gadget to exercise your legs, but it has no other purpose, and your effort will have no practical outcome except healthier legs - but a treadle machine has so many possibilities.

I own two, a 66 Singer and a bigger 99 Singer. Your PT is right. I am a masters level OTR and treadling is great for calf and ankle joints and muscles. Start out a few minutes at a time and work up your endurance slowly so you don't get leg cramps.

I have a treadle-able machine, but it's electrified at the moment. Finding a table for it has been impossible, just because they're so heavy the shipping quotes are $300 on top of the cost.

I've got one, but its stored at my mums. Too heavy to move down where I live not for the moment. I hope to one day have it up and running

@@cbayon106 They make reproduction treadles, but I hear they are not nearly as good as the originals.

I learned restoration out of necessity during lock down. What an engrossing hobby! Who knew?

Yours is right about the age of mine. They are such wonderful things. I was once asked what it sounds like & I answered "like magic".

@@lajoyous1568 It’s true: the best part of it is the sound.

Thank you for the lovely story Danee.

Do you use it?

Ahhh I'm SO going to watch this soon! I thrifted an 1873 Singer recently 🤞🤞. Merry whateveryoucelebrate :)

@@KellyLenior Oh that will be amazing when it is done!! All the best luck in your restoration journey. If you need any help i know some wonderful resources to point you in the direction of, don't hesitate to ask 😁

I have one of these I need to fix up! Thank you for sharing this!

@@thesewingarchaeologist9495 thank you so much, that is so kind! I have your channel bookmarked - will definitely check in when I get stuck. 🧡 (The craftsmanship in these things is incredible - almost 150 years old, still running. 😳)

I’ve seen your videos! They’re so helpful!

I dont know how anyone has that much space to store them all XD When she said she knew someone with six machines i was shocked.

You too? The bug bit me too!

I resemble that remark. I only have three though.

Uphill, uphill!!!

Oh what a wonderful project, to be able to get your great grandmother's machine working again. I'm smiling ear to ear at the prospect of it. I'm reading deeper into the comments, and if you look below, there is a comment about where to look for resources on how to get treadle machines working! Good luck to you, if you decide to take this up.

I have gotten a lot of treadles back to stitching again. It is not difficult just a little sweat equity and some love.

@@annelittlebird8282 that's good to hear, this machine probably hasn't been used for upwards of 40 years

@@copper589 I reworked my grandmother’s 1910 treadle and it runs like silk. My everyday is a 1925 Singer 66 and I have reworked several singer 99s. Mostly it’s cleaning and oiling. I am working on a 1935 Singer right now a friend brought me as she was taking it to the dump. The machine is in fab condition and after I refinish the cabinet I will offer it up to free so someone who will love it. There was no reason for it to go to the dump at all

@@annelittlebird8282 that's amazing, I hope it finds a good home

Someone actually dumped them?! People dont appreciate what they have,good God!!

What a great idea! I've often felt bad about throwing away an otherwise good needle (e.g., not broken or bent). Tinfoil as well - just run it though a few times. I think it knocks off the burrs (as an emery board would do), so it doesn't actually sharpen it.

@@EsmereldaPea, here's the thing (if you want to get technical)... Stropping (on leather, like the barber does with a razor) doesn't sharpen or remove the burrs... you are right! It just re-aligns the burrs back into position for a sharp edge or point. But an emery board is actually a type of sand paper. So running the burr over sand paper will remove the burr....Fun fact: according to most dictionaries, both are included in the definition of "sharpen". Thanks for your comment... I learned something. 💖🌞🌵😷🎅

I use 1500 sand paper but if the needle gets too short it will start to skip stitches.

@@marjohnsmusings3222 , I try not to file the point of the needle... I work on the sides, rolling as I pull across the sand paper. 💖🌞🌵😷

Thanks for the resource Jenn.

Hot chocolate with whiskey... Thanks for the idea!!!

@@m.woodsrobinson9244 you are most welcome :)

Chai tea with a bit of hot chocolate mix and a dab of whiskey is nice too

I have a 150 year old sewing machine that has been passed down through my dad's side of the family from mother to daughter (skipped my dad's generation because no girls but was given to my mom to hold onto until I was old enough to have it) so I have not only a piece of history but a piece of family. It has many old sewing notions and antique bits and bobs that have been left in to be passed down with it (crocheted lace, a wedding ring, a drivers license, razor blades from companies that don't exist anymore) and I cherish all of it. When I use it I know I am the 6th generation to use it and someday I will leave my own bits and bobs in it with the others to pass down to my children and grandchildren

@@maggieholland8202 I love every bit of this story! What an amazing family heirloom!

@@rebeccashields5994 it really is! Like truly it is

I so agree ❤️

That important looking screw goes with the seam guide. ❤🌅🌵😷🎅

You ca nput a tiny piece of fabric or felt under the edge of the seam guide so it doesn't scratch the finish.

@@rinaeperron7746 I've never had one scratch one of my machines, but that's a great idea! However, I would use some of that non-slip shelf liner, because those seam guides are not very secure... mine were always slipping. (the magnetic ones are worse.) But I stopped using the screw in seam guides when I learned that removing and reinstalling that screw over a hundred years will eventually wear out the screw threads in the bed of my machine. So I switched to an old credit card and some double sided tape. Bonnie Hunter has vintage machines and uses a tape that is temporary... that doesn't mess with the paint finish and I believe she removes the tape after each project so that the tape doesn't have time to bond to the paint. On my machine, I tape it to shiny metal throat plate (no paint), so I don't worry about what kind of tape I use. 💖🌞🌵😷🎅

@@suzisaintjames I have also put a small strip of blue painter's tape just on the long edge of the seam guide. Lots of good ideas and info@

@@rinaeperron7746 the painter's tape is good, but a thick credit card or room key has a thickness that makes a wall that helps keep the fabric from going over. It all depends on the level of accuracy required. The screw in seam guide is fine for garment construction as a mm here or there doesn't make that much difference. Strip piecing ... just a piece of tape is cool. But some of the quilt blocks where they stress accuracy over trimming to size... You need all the help you can get. There's no wrong answer here... just the love of sewing. 💜🌞🌵😷🎅

Feliz Navidad to you too 💖🌞🕯🧚‍♀️❄☕

Me too, Lilline. I hope your 2021 is much more fun.

But... What happened with the sewing machines?

Nouria, thank you, I was combing through the comments to see if anyone else had mentioned the usage of this part before I made a silly of myself, and there you are!

I have one for my machine but instead of using it I bought a new needle plate from a reproduction parts store that has the gauge engraved on it. I kept the old plate of course but since I use the machine all the time I went for practicality. I also got more bobbins for it so I can have all my colours loaded up

I'd never thought of that, but what a great idea! They're wider, but very similar to modern boning!

This is why I love watching these sewing videos. I always ALWAYS learn something.

Wow!

Seriously if you can find someone with 3d printer or even check out your local library to see what services they offer(you might be surprised) you can easily print pin bobbins, plates, levers, even pressure feet. In rather interesting way it combine the past and future breathing new life into these old machines

I think to the Right , from the sewer's point of view. Left of the foot is for the cloth

Sergers are invaluable for modern sewing! You can find them pretty inexpensive. Mine is a cheap 3-thread and after almost 30 years, it's still going!

@@EsmereldaPea Unless you’re like me and would prefer to never have to let a serged seam touch your skin again.

If you don't have the manual, Singer has just digitized their entire library of manuals. It's worth a look.

@@DodiTov And the service manuals, meant for the repair men. Invaluable.

Good advice!

Also, ONLY clean it with Sewing Machine Oil. Never water or any other cleaners. SMO (Sewing Machine Oil) is the Best thing you can use, and it won't cause any rust.... if anything it will Remove any rust or built up gunk :P

Yes!!! Great suggestion!

I think I was up to 7, then life happened and I had to sell all but my essential one plus my serger. Perhaps one day. . .

I received for Christmas, a small book which I presume was distributed by GE in 1928 with Featherweight sewing machines, before they were Singer. What is interesting about the book, is it gives an idea of the type of person who could afford such a machine back then. It suggests setting up a sewing room with the most extravagant range of equipment, including things like a pinking machine and belt holing machine. I use handcrank machines at home, though newer ones from the 60s and later. The book has certainly peaked my interest in trying a featherweight ♡

@@sophiesong8937 I hunted for a featherweight for five years not because I quilt (I haven't tried that yet) but because I was convinced it was the right machine for me. If you have the patience to hunt one down, they are great. A featherweight feels just like an old metal Singer that can do all the things you want it to be able to, but that hasn't gotten past the steampunk attachments and gone dangerously over into the world of Plastic Things That Don't Really Work. It is also cute and light and tucks into its own neat little box. Couldn't love mine more.

@@jenlb You described that in just the right way to make me want one. Haha. I do have a beautiful vintage Brother buttonholer, which is equivalent to the old Singer buttonholer that looks like a stapler.. Makes the most beautiful buttonholes, but using it feels like a magical toy, because it just operates with a turn of the crank on my machine. They've really done an amazing and sneaky job of marketing the idea that new must mean better, haven't they?

@@sophiesong8937 I think I was cured of the need to sew on plastic by a horrible 70s Singer Touch and Sew my family bought at a garage sale. The only thing it did right was wind the bobbin in place. The rest of it was a raging disaster. It had a tube that dropped down like an oxygen mask on a failing airplane to suck the thread through the needle, but it couldn't sew a decent, properly tensioned seam to save its plasticy little life.

That’s possibly one she’s made herself. Try searching for waistcoat patterns on Etsy, there are a couple of great pattern companies there, or there may even be sellers with vintage waistcoat/vests for sale. You’ll have to adapt them to fit but the good news is waistcoats are really simple construction usually, great beginner projects and they don’t use a lot of fabric.

@@helenyoung41 never thought about that, but thanks.

Thank you! I made this one myself. It's roughly 1790s style, if that helps!

@@CathyHay that's great, i prefer much older type of clothing, i love the way it looks and the pattern is great.

@@lunavictorian9605 🐝There is a reliable online shop called Historical Emporium in the U.S. I haven’t bought a waistcoat yet, but my “pirate” blouse and riding skirt are very good quality fabric, and well made. Do check the size charts and comments for hints about each particular garment. Enjoy your enhanced wardrobe!

Yes, this; I got a dozen pack of reproduction bobbins and they are a couple mm too short to work right. I did eventually find some old ones in a second hand shop to use.

I only have the 1 shuttle, but a couple bobbins, I just re-thread the shuttle with the thread I want to use. It's nice to have a couple shuttles, but not a Must. It can also be extremely hard to find the shuttles and bobbins for German machines. ;)

What you didn't see was that the rest of the screws were in so tight that we were left with little option but to tear one side off and carefully walk the machine out of the crate. The benefit of the doubt is important too. 🙂

The handle is to lift the top of the case off. It cannot support lifting the weight of machine... at least not often.

Do it!

I thought the same thing in case of a breakage. My brother took a broken part from his father-in-law's antique sausage stuffer to a local machine shop and they were able to duplicate the part.

@@EsmereldaPea Now I am curious where such a machine shop is (what country)...?

@@catherinejustcatherine1778 Alex Askaroff Is in UK and has THE BEST collection of vintage sewing machines. He repairs them and is a wonderful resource. He has written wonderful books about the old machines and tales about his repair adventures. He is delightful! sewalot.com/collection_picture_alex_askaroff.htm Welcome to the rabbit hole!