Unboxing and review of the Metabo 160-6 W OF Compressor

Рет қаралды 30,085

3 жыл бұрын

In this vid I am unboxing and reviewing the Metabo 160-6 W OF (small 6 Liter) compressor. I share my experience and will give you 4 reasons why you should (not) buy this machine.
You can purchase the compressor here: amzn.to/3dLQGxq.
Please leave me a comment below and subscribe to the channel; i am planning to make more tool reviews.

Пікірлер: 16

@gplusgplus2286 2 жыл бұрын

Very good video. Made me not make the same mistake. Looking to get the 280-50 OF model

@vollmond1822 2 жыл бұрын

mooi filmpje.bedankt!

@hossphoenix4272 3 жыл бұрын

Good Review. I'm going use it for my nail gun for the first time. Can you recommend a hose and size diameter connector. Is this a standard fitting.?

@dlmm2645 3 жыл бұрын

Hi Hoss, It is a standard fitting. I would recommend to get a more silent option as compressor. Perhaps the silent line from Airpress or Senco (if you are in Europe). Going to try those anyway.

@theneone111 3 жыл бұрын

Thanks what compressor did you settle on in the end?

@dlmm2645 3 жыл бұрын

Have my eye on some models but did not test them.

@cell32005 2 жыл бұрын

I am looking at this compressor to use with a modelling airbrush, which usually operates on little over 10 PSI. The compact size and clean design seem very cool, but I paused when you said it was not meant for spray gun; did you mean the larger (car-body painting) type, which operates for longer durations?

@dlmm2645 2 жыл бұрын

I ment the larger ones, like HLVP. But if you are searching for a compressor primarily for airbrush purposes I also would suggest you take an other option.

@cell32005 2 жыл бұрын

Thanks for the reply; what is your main concern (so that I know what to look out for)?

@dlmm2645 2 жыл бұрын

@@cell32005 an more all-round compressor like is not intended to run continuously. This will result in have a fairly short life. Next is the sound level. I can imagine that you have to be concentrated for an airbrush job. Not only the sound but also the vibrations (due to the sound) are significantly present with this model. It is not a bad compressor, dont get me wrong. But perhaps more suited if you have more space (store the Compressor in an different room) and if the airbrush is not the main activity.

@cell32005 2 жыл бұрын

@@dlmm2645 the sound level and vibrations are legit concerns, even if perhaps not for me personally. The continuous running less so; many in the hobby use even compressors without a reservoir, so ... Will try to find out a bit more about it, thanks again for your replies.

@MrTcardoso 10 ай бұрын

Thanks for the video! Did you end up getting a different one?

@dlmm2645 10 ай бұрын

Hi, I did not (yet). I did come across the world of LVLP spray systems. So... still trying some things out to find the best solution.

@MrTcardoso 10 ай бұрын

@@dlmm2645 I came across this DEWALT Pancake Air Compressor, and there are similar ones from other brands. It looks pretty cool and at a reasonable price in the USA, but here in Europe, it sells for double the price, unfortunately.