It says it's a 48 volt inverter all over it so I would say it's a 48 volt inverter.

I'm actually more impressed that you ran 60v through it and it just took it!

Just purchased the 24v version of the 3kw inverter. Ran a mild test of 1800 watts without a single issue. So glad I've watched so many of your videos before I made a purchase.

You do know the quick temp difference when heating a cold electrical device will create condensation right?

Same thing happened to me. I ordered a 12 v 600w inverter and they sent me a 24v 800w. I didn't bother returning it. Just use it in a portable bank. I've actually been loving it.

U got a nice new place & really nice new equipment congrats on the new home .

Hi, for the 60V inverter, did you have to have them custom set it for you? I couldn't really find any inverter they listed for 60V? Also what's the cut off voltage set for the 60V version? I'm trying to find a 2000-3000w inverter that can handle up to 64-65volts and cut off at about 56-57volts. Running 16s Chevy Volt. :)

hey love your vids bought one of those the 24v 3000watt just awaiting jamaica customs to tell me how much duty to pay been sitting there for a week now any way thats jamaica keep testing you rock

i hope since i sent ya the link for the inverters i hoping your testing will show it a pretty decent brand

My inverter came with an open ground from the factory and I want to charge my Nissan Leaf which requires a neutral ground bond. How do I get around this so I can charge my car? Thanks.

I just tested the same inverter but it is 24V DC 120 AC 60hz with two NEW truck battery's (31-1125S) I ran a 1500 Watt heater and a 1500Watt paint stripping gun for ten minutes the cheap clamp meter said 116.5 amp X 22 Volts sagged through the cables that came with the unit read on the front of the inverter and 109 AC Volt out on the inverter. The fans came on in 4 minutes at the first of the test and ran for another 2 minutes after I shut the two heater load off. I left the inverter on so the fans could come on later to finish cool the internals. So with the voltage sag that would be a 2563 Watt test no flickering red light. Ruffly what a V8 starter would draw, The battery's started at 25.2 Volts and finished at 24.7 :)

surprised it did not go pop when it was on 60v battery (was unsure of what was up with it until stated it as 60v when its setup for 48v), the inverter was marked for 48V and the transformer had 48v on the inside as well so one would assume it's a 48V inverter in the incorrect box (it should really have overvoltage protection as it has under voltage) not sure why they stated on where ever you got it from that it had a wide voltage range 48v-68v

hey what would you charge to fix my mppt 60 the electrion put to much voltage to it

just hooked up the reliable 3000 watt 48 vdc inverter.. I grounded the unit to an earth ground and the tester I used indicated an open ground when inserted into the inverter's plugs.. anyone else having this problem.

i have 4000 watt 36v version of this inverter what solar mppt charge controller do you recommend for a decent price...

Link for wave analyzer please?

I would like to buy this product I wanna know 3 things 1)how is the product can I get 3000w from it 2)what is the no load current draw 3)is it bad to choose a 12v inverter as it draws too much amps so more heat I can supply all the necessary copper wires still it a bad idea

The voltage is too high that's why the red light is lit when these type of inverter have a high voltage they flicker

I have the same inverter 1500w When it reaches 55v during boost all lights flicker. I hope the dirty wave wasn't the reason my fridge broke.

so, what do you do with the fuses?

Are reliable inverters neutral to ground isolated or does it spit out 60vs etc between them

Nice vid ! this one did fail, after a while ?? Question about your Tracer controllers... I have the Tracer 4210a older model and want to know how much I might be able to over-volt it past 24vdc from the PV panels ?? Tnx rc

good afternoon I have 3000 watts 60N60 Reliable , 4 shunt resistance burned, what kind of resistance should be installed instead of burnt out?

I was about to self harm waiting for you to turn that inverter on. Damm

I hope someone here can help me. There is a strange voltage/bee sound out of the front of the inverter... Is this normal? Thanks in advance

Hey on your batt bank is that just copper pipe hammered flat?

With the _little_ and _big_ fets: Actually, from an electronics point of view it is more efficient to use more smaller fets in parallel than fewer bigger ones. That is because any mos-fet transistor has it's own D-S resistance. It can be fractions of an ohm for the higher voltage ones to less than one thousand of an ohm (0.001ohm) for low voltage ones. Now, the lower the D-S resistance, the lower the voltage drop across it and therefor the lower the power dissipated and lost on that fet. More fets in parallel means the total D-S resistance will be lower. And you can get so low resistances that the copper traces and leads begin to count towards parasitic resistance :D And the smaller TO220 fets have about the same lead current capabilities as the big TO247 ones so more smaller fets gets the lead current limit higher. The bigger ones have better high voltage handling and better power dissipation. They are good when you use them in their ohmic region like linear amplifiers, linear current regulations. And yes... it says on it 48v... But... again, if the first stage mosfets and the filtering caps and the control circuit can take more voltage without tripping an input OVC protection, the inverter will run more efficient as more voltage at the input requires less amperes for the same input/output power. It actually should run cooler and longer... if well designed and manufactured... and few are...

de donde salen los electrones de los inventos que yo fabrico(memorias virtuales y programadores)

I have a problem. I want a type of inverter with bypass but no charge control , do you think this inverters exist

this is 48 volt unit . why you connection 60 volt ?

I hate when I order something and they send the wrong item it's a pain to deal with.

you must be loaded! i think you're the king of solar on KZfaq by far.but i enjoy your video's none the lest.i just wish you would do a poor man's version or the best way to get started with a budget system and maybe the best source to get good deals on solar stuff.anyway great interesting videos and thanks for posting. even though you're way outta my league.

we think a like I have a video coming soon on a 1500 watt unit I just got from reliable to replace my 500 watt

I recently purchase a 3kw 12 v unit. Ir woek es lo in stanby for a week, test it for continus uses for 8hr, it fail. Alarm on, no poder output, blue and red light on. Julio

Mine 12v 3000watt does the same thing when its no load on it

i think i just got the 24 volt version lol im crossing my fingers on this one lol

I wound up with an Aims 2000 watt inverter charger 24 volt...($653 after coupon) ...it only has one transformer but it has about 10 pounds of copper in it I think so maybe it'll hold up....

Can you confirm something for me. I see a reliable 3000w 24v on ebay for 10.99 USD is it real or fake

just sent it thanks

that is the biggest battery bank ive ever seen on youtube lol good review thanks man. what is the usable amp hours available with that monster battery bank?

Im guess Im saving for a magna sine...lol...it seems to be working..they must have silver windings kinda pricey

Can I used one for my home 24/7 I bought one in florida and I need it to run my two doors fridge band also my small portable air conditioner for 24/7 if it can't work I will be disappointed

Can this inverter run 1hp pump

i have the 800w 12v inverter from the same supplier (reliable electric) and it is working pretty good for about 1 year at 500w continuous.... will be no prob if you run this one at 2300 2400W continuously

This is why I left the relm of chinese inverters. I have outback radians and am super curious of the magsine

Hi friend. I like how you put screwdriver on your battery contacts...i was just thinking ...hmm will we see some explosion or not ... :) It is really dangerous to put anything on those bare wires (pipes in your case :) ) . I like also your hacked watmeter...and cables all over ..This is not safe. I'm saying it just to warn you you could get hurt. please be careful with that stuff. You have too many batteries so you should be really careful. But that is how i see it. Feel free to ignore me if you like :). Anyway nice video.

i buy this same inverter but 1500wand they send me a bad inverter they say to send them 170 more and they will send me a 3500w inverter 24v , and guess what this one came damage to i open it and they did a cosmetic repair and i lead them know and they sy the is strange, i am still fighting to get my full refund but the giving me the go around the company on ebay is reliable power and they asking me to pay for shipping and i just want a inverter the last long and a good price any one know what will be a good one? i need 3000w and up pure sine and need to be 24v 60 mhz 120v any suggestions

Your Batteries will rise in voltage the warmer they get...

si no tiene el sello LTD no compre la unidad,porque no esta garantizada.

Chinese junk :D Nah i hope you get it sorted but my experience with custom stuff is that they cheat and dont reconfigure/rebuild it. Your incoming voltage to it is a bit higher than usefull for a quick reconfigure to work with the current hardware. I will follow you and we will see what will happen :)

On your 3000W inverter appears to have... ... You have a - 4 pairs - 2x mos-fet-s IRFP4668 - 9.7m ohm - maiby from Infineon. This is a 130A at 25 deg celsius and 92A continous at 100deg celsius, with 520A pulse. With 4 pairs, and 4 transformers ( you have 4 sets that can handel around 368A for a short time ) - and a very small impulse of 2.000A ... !!! You will never reach this... Will blow many other component in the way.... 368A on 48V = 17.600W - 17KW. as an impulse. You can start any applyance. The limits are the transformers, wires, and many others.... ... IN REALITY = on maximum 3.000W you will have 17A per pair, on 4 pairs = 68 A in a 48V sistem . This inverter will run almoust non stop. ................................................................................................................................................................................................... Let`s go to your new 8.000W. here you have F59N30 - 56m ohm - 59A at 25deg celsius and 35A continous at 100deg celsius and 230A pulse ( disipate 5 times more heat in running regards to - IRFP4668 ) When you run a 8.000 W model it will be hotter than 3.000 W modell. There are people who observe that. At same current ratings almost 5 times hotter the tranzistors... ... in this 8.000W model you have 9 pairs. 9pairs x 35A = 315 Amps max continous --- ATTENTION !!! smaller maximum current than 3000W modell !!! Maximum pulse can be 230A x 9 pairs = 2070Amps , the same as 3000W modell.... ... IN REALITY = 8000W ... WILL HAVE TOTAL -181Amps - IN 9 PAIR = 20Amps - PER PAIR OF TRANZISTORS and transformer ... ( equal with your fuses2x10A, probably something bad calculations, or a scam ) ... YOU MUST CHANGE THE TRANZISTOR, PUT THE ORIGINAL THAT ARE IN 3000W MODELL - IRFP4668... Of course, if there are damage in control board must be repaired. The fuse 2x10A must be bigger, migt be used 2 x 15A. fuse

Power factor is not percent. It's the cosine of the I/V delta.

What's the update? I bet they already redesigned.

It only said 48 volts on it

It says 48 volts. Why would you think it's 60v??

Go to China and have one them Chinese go by you one then pay duty on it and bring it back you will get a good one they keep the good stuff and sell use the rejects

Well it says 48V right on top of it....

That looks incredibly similar to an AIMS inverter.

its not a 12 volt inverter..why would you buy a 48 if you need a 12

hey how can i send you a personal message

It's a 48 volts inverter, it's marked all over.

i dont see it as being sent the wrong item, i see it as not being sent the ordered item, therefore item ordered has not arrived.... and they can damn well send what i ordered or i will raise hell till i get a refund or the right item.... and if you want this item back i did not order, pay return shipping or come and get it, because after1 week i'm charging you storage....

Oh no, is this 30 minutes of here we go again?

There is this video (kzfaq.info/get/bejne/js2gp6h-17i4l4U.html) about this type of inverters that claims that this inverter from Reliable have a live ground...is your like that too? Thanks

no te meta en lo que no te importa,para no mandarte 7 pie bajo tierra(dangerous)

Can you send it to me

some hing is fishy about the inverters you tubers say its ok and amazoners say it is bad so i will just believe amazoners because in you tube the reviewer may be playing advertising tricks

Chinverter lol

This vid is about 29 minutes too long.

I have one of these and the mosfets blew. Fuses are totally useless. 3000w is a stretch. Transformers are too small. I found bits of solder between the legs of the Fets, so manufacture is sloppy. Ordered some replacement mosfets, and the person a Reliable sent test instructions with a link to a video of a chinese guy, testing and replacing blown transistors. His unit still wasnt working and the video cuts off with him hitting the back of the board with pliers. So there you go American Imperialist suckers. Another blow for global communism!

oh man, you have some good ideas but what a mess. Your battery room is SCARY. That enormous battery bank with unshielded copper pipe connectors?!.... this is a very dangerous accident waiting to happen. PLEASE at least clean things up and shield / cover your open connections before you make more videos.

I would stop over volting these inverters. no matter the quality.

Reliable inverters are shit ive had 3 and they all failed