Understand the difference between iPilot and iPilot Link. #minnkota #humminbird #oneboatnetwork
Пікірлер: 374
@cs776Ай бұрын
Very enjoyable and informational, thank you for taking the time to put this on You Tube..
@principleoutdoors8932Ай бұрын
Thanks so much!
@Bassandbackpacks3 жыл бұрын
Thank you. Just bought a terrova. You answered all my questions. 👍
@principleoutdoors89323 жыл бұрын
Glad it helped...thanks
@swamp45rat3 жыл бұрын
Great video John! As I am purchasing a new motor for my boat this spring, this has helped me make an informed decision when picking it up!!
@principleoutdoors89323 жыл бұрын
Great to hear!
@jimkingsland16453 жыл бұрын
Thank you for this most informative. easily understood presentation. Touched major points I was wondering about and had no explanation of before! Yes more please!’
@principleoutdoors89323 жыл бұрын
Thanks so much for taking the time to write this Jim!
@frankclark41042 жыл бұрын
Very informative video John...great job
@rogerramjet75673 жыл бұрын
Amazing. Very informative. Thanks.
@russellcherry32883 жыл бұрын
Thanks for the great information this has been helpful
@striperfishing4083 жыл бұрын
I been waiting for a video just like this great video. Now I really know the difference between the two.
@principleoutdoors89323 жыл бұрын
Glad you enjoyed it!
@duanew3324 Жыл бұрын
Very good intro, and Min Kota has really helped the fishermen and women with these products.
@principleoutdoors8932 Жыл бұрын
Agreed!...thanks for the comment
@duanew3324 Жыл бұрын
I have Down Imaging on the trolling motor and side imaging on the boat transducer. It could be that it is working right, and that I haven't set the settings correctly. Thanks for your reply, I am forced physically to wait until next year which has been a bummer since we have had some great late fall weather. Good luck on the water!!
@johnrogers3781 Жыл бұрын
I also wanted to give a shout out to Minnkota for making an awesome product. I have a 21ft pontoon that 3 large anchors couldn't hold in the wind. But with spotlock my 80lb 24volt Ultera holds me in place on even the windiest days.
@BlockchainToTheFace Жыл бұрын
You should’ve watched some videos on how anchors work
@evantaylor9282 жыл бұрын
Best video. I have been searching for this video!
@principleoutdoors89322 жыл бұрын
Thanks so much for taking the time leave this note Evan!
@bradmatz86223 жыл бұрын
This was the best explanation of these systems I have found thank you and I subscribed
@principleoutdoors89323 жыл бұрын
Thanks Brad...I appreciate you taking the time to say that.
@waderowcliffe48073 жыл бұрын
This video was very well done. Some people are just born with the skill of being a great teacher. And you my friend, are one of them. Knowing the info is only part of the process. Well done. I learn alot & enjoyed the video.
@principleoutdoors89323 жыл бұрын
@@waderowcliffe4807 Thanks so much for taking the time to write this...much appreciated
@Bights-On-Fishing2 жыл бұрын
Thanks for the great video. I hope Minn Kota makes a saltwater I-Pilot to fit a Hobie Pro Angler 14 Kayak.
@brianfreethy93222 ай бұрын
Thanks for the video, it cleared up all my questions, well done
@johnnoel20422 ай бұрын
Thanks for the kind words!
@coplock66893 жыл бұрын
Great video. Thanks for sharing. I just bought a MK Terrova and have no idea about ipilot. I believe I only have the ipilot and not the link, but still good video to watch. Thanks
@cmau8852 жыл бұрын
I've got a terrova with ipilot link and helix 7. I cast docks so following contour (shoreline) is awesome. Only complaint, if I manually take over to avoid an object, pick a snag, or spot lock to catch a fish...there really should be a resume button. I have to go from front deck back to counsel to reprogram. Resume would be nice.
@daveengstrom9250 Жыл бұрын
Excellent observation. I agree. Minnkota, get with it!
@jimhallila5006 Жыл бұрын
I have the same problem I have an ulterra with a helix and when I catch a fish while on contour follow I want to hit resume but I have to go through all the screens just to get back to contour follow. What is there a resume key on the remote if it doesn't have a function?
@lostviking540 Жыл бұрын
Agreed
@djmikelove15782 жыл бұрын
The ABSOLUTE BEST review on KZfaq! I'm having the Riptide Terrova 24/60/80 w/ I-Pilot (powered by two 50ah LiFePO4 batteries) installed on my 2019 Robalo R160 (90hp Yamaha 4 stroke). I'll pick it up from Charleston Marine on 23 Dec 2021. CAN'T WAIT!!! BEST VID!!!
@principleoutdoors89322 жыл бұрын
Thanks Michael!
@jamesbowden16602 жыл бұрын
Yes great video u explain everything to me that I needed to know thank you have a great xmas holiday
@principleoutdoors89322 жыл бұрын
Thanks Lames...all the best!
@pepajelito19792 жыл бұрын
*Looks good even in daylight **enjoyable.fishing** recommend it was exactly what it was described to be , works awesome , overall happy with product*
@TeamJesusOutdoors3 жыл бұрын
Great explanation of the differences between I pilot and link!
@principleoutdoors89323 жыл бұрын
thanks for taking the time to write this...much appreciated
@TeamJesusOutdoors3 жыл бұрын
@@principleoutdoors8932 my pleasure. Great work should be rewarded, even if in word only!
@fishingwithhonor25202 ай бұрын
Thank you for sharing! 🐟
@smoochmcguire52913 жыл бұрын
Great video thanks again
@principleoutdoors89323 жыл бұрын
Thanks Smooch!
@skipman47353 жыл бұрын
I have the min kota riptide Terrova on a tracker v-16wt. I've used it to 1 year. It is amazing. I troll by myself slot. I adjust the speed and set a heading. Now I'm able to put my trolling lines out without trying to keep the boat on course. When I hook a fish it allows me to fight the fish without trying to control the motor. If I hook a large fish I dial the speed back after hookup and reduce the effort to land it. I use spot lock in areas with heavy current. Anchoring in heavy current by yourself can be very dangerous and by the time the anchor sets your usually not where you want to be. This motor is incredible. It's totally changed the way I fish. I increased my catch rate significantly by using it in the past year. I'm out fishing the boats around me . It's a total game changer.
@migueltrujillo59322 жыл бұрын
Your enthusiasm is making me sick, get an Ultrex and be done with. Lol 😀
@trumpking487411 ай бұрын
@@migueltrujillo5932why? Really the only the different is auto deploy and stow and it will raise for different depths
@gregstrama7750Ай бұрын
Did you buy 12v or 24v Terrova ? I have simillar bout
@robbiesreapers2292 Жыл бұрын
Great vid!!!!
@vinosfinostapasandwinebar5109 Жыл бұрын
do, let me know when you are in Raleigh. Thanks. Very Clear answer. Got it
@johnpayton38243 жыл бұрын
Nice job Sir!
@principleoutdoors89323 жыл бұрын
Much appreciated John
@artieshow86293 жыл бұрын
Bought a 55 terrova riptide last year..best investment I've ever made..I mostly smallie fish but go to bays for fluke a few time so choose riptide..its sweet and at 63 no more anchors 😁
@principleoutdoors89323 жыл бұрын
Must be nice to be able to fish fresh and saltwater...very cool Artie
@clearwaterfishing3 жыл бұрын
Fantastic information!
@principleoutdoors89323 жыл бұрын
Thanks for watching!
@principleoutdoors89323 жыл бұрын
Thanks so much Clearwater Fishing
@MartinHentges3 жыл бұрын
My boat is currently in the shop getting outfitted with entire I-Link system. I’m pairing an Ulterra with a pair of Helix G3N. Can’t wait for the call when it’s finished and ready to go play.
@principleoutdoors89323 жыл бұрын
That's great! You'll have a blast
@johntully4608 Жыл бұрын
So after a year, how do you like your Ulterra? Any issues? I’d be curious
@robertwoodward3884 ай бұрын
Thanks for the info
@randylee68232 жыл бұрын
I have the 2017 power drive I pilot I really enjoy no issues always performs well.
@principleoutdoors89322 жыл бұрын
Awesome!
@fishnlift01 Жыл бұрын
Thanks for sharing!
@principleoutdoors8932 Жыл бұрын
Thanks for watching
@IATG-tl3jf Жыл бұрын
Awesome thanks
@joelmyers2026 Жыл бұрын
Wish you would have spent more time on recording and following tracks. I just bought a Terrova and it's quite different than my old Powerdrive, Still a great video.
@itmustsuck2bu2 жыл бұрын
Thinking about a Terrova but I run Lowrance HDs carbon I saw in other videos that there’s cables to link them with the trolling motor will also be able to do all the functions with Lowrance as I would be a hummingbird helix Basically wanting to use auto pilot spot lock and make use of the transducer in the trolling motor
@principleoutdoors89322 жыл бұрын
If I understand your question, this would be the answer. The functions like AutoPilot and Spot Lock have nothing to do with the sonar. It's in the motor that it happens. Buy an iPilot Terrova ( not iPilot Link) with a US2 transducer (not DI or SI) and the transducer in the motor will hook up to your Lowrance for 2d sonar readouts
@Dw89773 жыл бұрын
Thank you
@benlavoie49513 жыл бұрын
I put Ulterra with i-pilot link and Helix 7 on my river boat for fishing big rivers. One issue I have found is that many features like cruise control and auto pilot don't operate well when I have boat pointed into the current (as it usually is) and fishing as we drift downstream. I would love to be able to set a speed and distance from shore (similar to lake contour) and have the motor be smart enough to simply slow the boat's drift and bump me in or out based on shoreline. Admittedly, I am still learning a lot about what it can do, but I haven't figured out how to do anything like this yet. I usually just have to do it all manually and then lock spots I like. Just a thought for the next generation
@muskietime Жыл бұрын
Probably 15 years ago, I owned a Pinpoint Trolling Motor which did as you asked: You could set the Distance from Shore. Plus, you could Set the Depth after “teaching it” which side of the motor was closest to shallow water. Unfortunately, most shorelines are irregular (docks, underwater boulders, fallen trees...) and the motor would “correct” for what it saw as the shoreline. The Depth Contour was good but would get really confused with inside or outside turns. Perhaps in the future they can figure this out by scanning further ahead. I was told that the Pinpoint had five transducers built into the unit!
@duanew3324 Жыл бұрын
A great video, I put fishing aside for the last 12 years. Prior to retiring last year, I wanted to upgrade my 16 foot Deep V Tracker with a new trolling motor. I admit I didn't do a lot of research but did ask a lot of questions at Cabela's. Based on their info I bought the Ultrex I Pilot 80#. Due To health reasons, I was unable to put the boat in the water until September of this year. I bought a new Helix Humminbird Chirp GN3 gps Mega SI. I love the combination, but first time out the transducer didn't work on the boat. I was told to switch the Y cable around which fixed the boat transducer but now it seems that the trolling motor isn't working on the down imaging. Now I'm laid up until next year but am wondering if I was sold the wrong cable. Any info would be helpful, so I get it all working before next year. If the salesman would have talked more about the I Link system that is what I would have gotten. Pays to Reseach more thoroughly, but I'm sure I'll be satisfied once things work as they should. Spot lock is amazing.
@principleoutdoors8932 Жыл бұрын
Thanks Duane...I would need to know what transducer is built in to your trolling motor
@Aaron.Davis563 жыл бұрын
Nice machine, but try getting one. I've been waiting a month for a Ulterra 112/72 Riptide (National Back Order). It's cold in CT so I hope it shows up before Memorial Day
@principleoutdoors89323 жыл бұрын
For sure. Demand was crazy last summer but then over the fall and winter the demand skyrocketed. Minn Kota has increased production and is starting to catch up.
@brianbartos63882 жыл бұрын
THX, again for great break-down explanation of the difference between the both ! Can the I-pilot be retrofitted to be a i Pilot -Link , and at about what is its cost ?
@principleoutdoors89322 жыл бұрын
Thanks Brian..You can buy a new iPilot "Link" kit which will replace you're iPilot controller. Very easy to do on Terrova...less easy with PowerDriveCost is about $650 USD so most people find it more cost effective to sell their motor and buy a new Link motor.
@fysh19453 жыл бұрын
This is a great video for a first-time iPilot Terrova owner like me. Question... Do I need to plug both cables into my Helix 9? They sold me an adaptor for the ethernet cable but not the metal 6 pin cable. And that pin cable doesn't seem to have a plug-in on the back of my Helix? Thanks!
@principleoutdoors89323 жыл бұрын
Sounds like you didn't get the adapter for the transducer in the motor. If the metal 6 pin cable is talk the size of the other cable, you will need and MKR-US2-8
@user-jc7ic1mb1g9 ай бұрын
question, I have a Helix 7 on my console can I put another Helix at the front of my boat and run them both of the same transducer ?
@chachi59752 жыл бұрын
Do you have any information on the I-track offset? I've seen it advertised but can't seem to find it. I have some tracks following the shoreline and as the reservoir drops I thought I could just move the track over a bit but haven't been able to figure it out yet. I've contacted Minn Kota but they only sent me how to move the file not the actual track!😂
@principleoutdoors89322 жыл бұрын
Hi Cha...It doers not look possible. Only Follow The Contour offset can be done
@Hookemsteve3 жыл бұрын
I have the powerdrive v2 and was looking at the upgrade system for changing it to i pilot what are your thoughts on that
@principleoutdoors89323 жыл бұрын
Any upgrade to iPilot is great, even if just for Spot Lock. Keep in mind that if you do the upgrade on a PowerDrive , you can't still use the pedal. Also, the cost is about $400. Depending on budget, it may be better to sell the PowerDrive and buy a new motor withiPilot pre-installed
@butchfolsom49743 жыл бұрын
Can I mount the i-pilot trolling motor on the stern of a 14' boat or does it have to be on the bow to work properly?
@principleoutdoors89323 жыл бұрын
Hi Butch...It would have to be mounted on the bow for the functions to work properly
@vinosfinostapasandwinebar5109 Жыл бұрын
Very helpful video. Thanks! What is the difference between a route and an itrack? Can you plot a route and then have mine kota trolling motor do a "go to" so it follows the route? How many points can be in an I track?. I heard that the itracks use to be six tracks at 2 miles each. Maybe that was just iPolit. Is the new ipolit 66 tracks at 2 miles each or is it less?
@principleoutdoors8932 Жыл бұрын
Thanks! A route is created on the Humminbird for boat navigation. An iTrack is created with the iPilot motor for the motor to follow.Yes you can create a route on the Humminbird and have the iPilkot follow it, but this is a lot of work. Always easier to press record iTrack and do the route you want, then it will be in the memory. Regular iPilot is still 6 iTracks, iPilot "LINK" is 66....you now owe me some Tapas and wine LOL
@GmGarlo2 жыл бұрын
how do you keep the trolling motor cable from wrapping around shaft when on spotlock? some say it will unwind by itself but mine doesn't.
@principleoutdoors89322 жыл бұрын
only the newer Bluetooth models stop at 1.5 turns. If yours is older you'll have to keep an eye on it
@kwaks19793 жыл бұрын
I need help finding what we need for adapter from helix 7 g3n to the terrova ipilot. AND what do we need for extra cable from helix to terrova? Also, when we try to do a record on our i-Pilot it says it saves but when we go to I tracks it says that record isn’t as long as what it recorded. So we record 1.8 sq miles and when going to I track it says it’s only 800 feet. Any help with why it isn’t working???
@principleoutdoors89323 жыл бұрын
Hi Shannon...for the Cables, I would need to know exact model of sonar and exact model of Motor...there are different transducers involved here. I suggest calling the tech support line for your question on tracks 1-800-2276433
@patrickhealey65662 жыл бұрын
Great video..just purchased the Terrova 24/45/80 US2….question; I have a lowrance hook 5 unit..I know I’ll lose my down imaging but still keep sonar with the built in transducer that on the Terrova…all I need is the compatible cable MKR-US2-10, correct ??
@principleoutdoors89322 жыл бұрын
Thanks Patrick. You can look up your sonar/ US2 compatibility here www.minnkotamotors.com/learn/technology/trolling-motors/universal-sonar-2?_ga=2.190444523.1159642399.1651080700-1756615834.1649439848
@diegomedina56902 жыл бұрын
I'm having problems spot locking under a bridge. Trolling motor literally goes everywhere but the spot I need to be. Is the built in gps signal too weak for spotlocking under bridges? Would the heading sensor help fixing this problem? ( autopilot 120, sportsman kayak )
@principleoutdoors89322 жыл бұрын
It would be difficult for a GPS receiver to get signals through a concrete and steel bridge. The heading sensor would only help with direction, not receiver strength
@Austin_Torres3 жыл бұрын
Is there anything available to get a power drive minnkotta wireless control to replace the foot peddle control? I have one for my kayak but man its a bummer when I want to move around. Im bound to the foot controller.
@principleoutdoors89323 жыл бұрын
Hey Austin...Yes there is a wireless remote called the CoPilot...does everything the pedal does but on a wireless key fob . Here is the link for a V2 PowerDrive. minnkotamotors.johnsonoutdoors.com/accessories/trolling-motor/copilot-system-accessory-powerdrive-v2 there is also a version for older Powerdrives. The receiver mounts to the side and plugs in where the pedal was
@thomassater34627 ай бұрын
I just picked up a used boat with various Humminbird Helix screens and an Ulterra with I-Pilot Link, so I'm just starting to figure it all out. But the VERY FIRST THING I noticed was the placement of the buttons on the Link remote. The non-Link remote has buttons on the bottom so you can see the screen above. Plus, any phone in texting mode has the buttons (keyboard) on the bottom, where your thumb naturally is when you hold it. I think buttons on the top was a bad choice.
@principleoutdoors89327 ай бұрын
I agree with you 100% but keep in mind you can go in to the menu and flip the screen
@thomassater34627 ай бұрын
@@principleoutdoors8932 True, but the buttons are still upside-down (e.g., the house). Do the direction buttons function backward if you flip the screen?
@principleoutdoors89327 ай бұрын
Pretty sure they do but I never tried it@@thomassater3462
@samuelchancock Жыл бұрын
Quick question, please. Will the I-Pilot Link and Hummingbird combo, allow the trolling motor to go directly to a way point that is stored. For example, if you're using Silesian and mark a brush pile. Will the trolling motor go to the exact way point and hold its position? Thanks in advance
@principleoutdoors8932 Жыл бұрын
You can tell the motor to go to a waypoint that is on the Humminbird. You will have to be within a certain radius of that waypoint though...2 miles I believe
@robertdowney73932 жыл бұрын
Heading sensor. I bought a boat with the 80# terrova I pilot link. Question on heading sensor placement. Mine is on the side of the console and I was wondering if that is ok, or should it be flat on the deck
@principleoutdoors89322 жыл бұрын
Best installation is flat. anywhere in boat that has no magnetic interference (you can check for this with a normal compass). Mine is installed on the back deck.
@lucst-michel3 жыл бұрын
Can I use a I-Pilot Link motor with my Helix 9 Gen 2. Thanks for this very good video.
@principleoutdoors89323 жыл бұрын
Yes you can. all you need is an AS EC QDE adapter and update the software on your Helix...Merci Luc!
@shawnkopinski5719 Жыл бұрын
I recently purchase a Minn Kota Powerdrive with I-Pilot. From the beginning the spot lock has not worked. I hit the anchor button and the motor sits for a second or two and then revs up to 8 or 9, moves off the spot 100 ft and turns off. I have adjusted the boat scale down to -2 to compensate for my smaller boat and still the same result. Minn Kota has told me I need to test my batteries under load. The batteries are brand new. I have 2 12V in series. Output is about 12.8V.
@principleoutdoors8932 Жыл бұрын
I can't really diagnose form a distance but if you've calibrated the motor successfully with no luck then I would contact your dealer
@johnnooyen87243 жыл бұрын
When using follow contour feature can hit spot lock then unspot lock continue following the contour line or can you jog the contour line?
@principleoutdoors89323 жыл бұрын
You can hit Spot Lock while doing follow the contour. From there you can jog.
@ollejarleborg12072 жыл бұрын
Thank´s for a great video. I have a Minnkota Terrova 55 BT and drop my remote control in the lake . I have now installed the IPilot Link app and trying to pair my iphone with the motor but failed. The motor is powered up and I hear a BEEP from the head when I push the pair button. and the Ipilot is active in the BT list in the phone. What is wrong since I cant pair the motor ?
@principleoutdoors89322 жыл бұрын
Thanks Ollie...be sure that if you are using the i-Pilot "Link" app, you have a "Link" motor...there are two apps.Also, the pair button must be held down while it tries to pair
@brianpeter71392 жыл бұрын
@13:58 - I don't think you can use the Minn Kota Heading Sensor puck with Humminbird units as you stated, unless something has recently changed? Doesn't it only communicate with the trolling motor via bluetooth? To get heading info on the Humminbird units you need the Humminbird external GPS receiver with integrated heading sensor, which is yet another $200 extra addon...
@principleoutdoors89322 жыл бұрын
Nice catch. I should have been more clear. It links with the motor through Bluetooth, then you can go to your Humminbird and tell it tu use the motors GPS (which is using the heading sensor
@geralds58343 жыл бұрын
I have an Ulterra i-Pilot link and a Solix on the bow and dash. The pink boat direction line was short when I first got the system it is now indefinite. Is there a way to get it back to short?
@principleoutdoors89323 жыл бұрын
Try this...Hit Home button / select settings / select my vessel / set COG Vector and HDG vector to "Time" / set Vector Time to 1 minute
@devernedunnum7215 Жыл бұрын
Great information but I have one questions. I currently have a Ipilot Ultera. Can I upgrade the head unit with an Ipilot Link system? I love the Ultera but want to switch out my electronics to Humminbird and integrate the two.
@principleoutdoors8932 Жыл бұрын
Yes you can...find your local authorized service center and they can quote you the cost...Thanks!
@jimhallila5006 Жыл бұрын
Two things you didn't touch on. What is pause and resume used for? When I'm on contour follow and I catch a fish I hit spot lock but the problem is that I want to resume my follow contour I can't unless I go through all the screens to start contour follow again. I once had Pin Point troweling motor and any time I hit pause all I had to do to resume was hit one button on the side of my foot control. This would also let me reverse direction but hitting one button on the side. I find it hard to believe that there isn't a simpler way to resume contour follow. I have a ultera troweling
@principleoutdoors8932 Жыл бұрын
sounds like an observation more than a question. I would call the Minn Kota tech line and pass that on
@joeturner1195 Жыл бұрын
What about the ultrerra the auto stow /deploy talked to several people and they said that they had trouble with them getting messed up and not working as well and had to have them worked on if they bumped into something or some times just acted strange and had to work on them or get adjusted do you have any thoughts on what they may be talking about I'm looking at getting ultrex or ulterra would like to get auto stow/deploy just don't want abunch of problems I have a terrova already thanks
@principleoutdoors8932 Жыл бұрын
If you consider how many units were sold a few issues is minor. In my experience helping people, the issue is always poor boat wiring between motor and batteries or old batteries
@principleoutdoors89329 ай бұрын
You can...IF they are bothe networking models, meaning G3N or G4N (must have the "N":) if yes, you just need one ethernet cable and two AS EC QDE adapters
@speedpiet8872 жыл бұрын
Thanks for the video. Can you plot in way points in the hummingbird, and sail via Them? In Advance thank you.
@principleoutdoors89322 жыл бұрын
Thanks Speed. Yes you can add waypoints manually or simply on the chart plotter screen when the GPS receiver is locked on. After that, they can be joined together in a route
@alanmorris28652 жыл бұрын
I have an older iPilot that came with a boat I just purchased will it have that heading sensor on it like the new ones have? My system is probably pre 1016. Has the older iPilot remote.
@principleoutdoors89322 жыл бұрын
Hi Alan...No it won't. Only the Bluetooth BT models have and can be used with the heading sensor
@tjcamp3835 Жыл бұрын
Hello, I enjoyed the information in your video. I just bought my first boat and the seller tells me that the trolling motor and hummingbird are hooked up. If want to switch out the hummingbird for a new one do I have to change out the transducer or are they universal being the same brand?
@principleoutdoors8932 Жыл бұрын
Thanks TJ...hard to answer that question without all the details. Minn Kota has motors with three different types of transducers. If the motor is 5-10 years old it is probably a US2 (2D) transducer and that will work with most Humminbird
@coplock66893 жыл бұрын
Oh......I did have a question, and this is my first trolling motor so sorry if it's a stupid question, but do I have to lift my boat motor out of the water when using the T motor??? So that it doesnt work against the T motor?? Sorry for the question, I'm new.
@principleoutdoors89323 жыл бұрын
Not a stupid question at all...don't worry about where your outboard is. The motor has plenty of power. In fact I keep my outboard down to act as a rudder and keep the ass-end of my boat swinging around on a windy day
@coplock66893 жыл бұрын
@@principleoutdoors8932 Thanks for the reply, and keep up the good videos.
@411sponge723 жыл бұрын
Thank you for the video! I love my I pilot link. You mentioned that its not necessary to install the heading sensor but don't you lose some functionality of the trolling motor without it?
@jeisonhansson3 жыл бұрын
Yes, you loose the JOG funktion.
@principleoutdoors89323 жыл бұрын
Yes you absolutely loose functionality and accuracy so it is best to install...but most functions will work without it. I just found it funny when customers would ask if they should install it...it's in the box for a reason...thanks Duke!
@dalehayslip57113 жыл бұрын
I just hooked up my new Minn Kota I-pilot with spot lock today be never put in the water I paired the blue tooth and everything seem yo be working but I seen videos were you Got to go out on the water and go in a circle 2 times does that something I have to do with my motor
@principleoutdoors89323 жыл бұрын
@@dalehayslip5711 yes it helps with performance and is very easy to do. Just follow the instructions on the remote...."calibrating"
@KTMotorsports992 жыл бұрын
Do you have to calibrate to motor each time?
@vaschier725 ай бұрын
Hi, very good video, I have a question ,what is the difference between the two remote control which one is the best and I live in Canada and I had two model to choose of terrova, the first is 135880 model and the second is 1358894 what model you recommande to buy, thank you again
@principleoutdoors89325 ай бұрын
that really depends on what boat you have. One of those motors is a 45" shaft, the other 60 ". They are for two different boats. Also, they are discontinued models but that's not always a bad thing
@alekcook9957 Жыл бұрын
Does it have an option to read the depth of the transducer. So u can set the depth of say 60 ft and it'll follow 60ft by transducer, not the map?
@principleoutdoors8932 Жыл бұрын
No it doesn't. I suspect the difference in bottom depths would cause the motor to over work
@Darkrider9982 жыл бұрын
I have a 2017> terrova I pilot and want to upgrade to I pilot link, I noticed there's a kit you can buy is there any issues you have with the upgrade kit ?
@principleoutdoors89322 жыл бұрын
No issues at all. I've done it myself... 4 screws and plug in the new head...works great
@richgorkes22842 жыл бұрын
I just bought an Ulterra with ipilot link and on the remote there is not a "follow the contour" button like it shows in your video. Any thoughts?
@principleoutdoors89322 жыл бұрын
I've never seen it on the remote either actually....hadn't noticed that in the video until I just checked. May have been in original plans. Easiest way is on your humminbird. Put your cursor on the contour line (LAkemaster or Autochart only) press "Go To", select Follow The Contour
@jamesmurphy10402 жыл бұрын
I have 24v Ultrex, it was install in Dec. 2019. Since then I have had in the shop under warranty for losing spot lock. First problem, they claim on and off switch. It worked great for a year and went out again, this time they claim motor head and pedal circuit board. It is working but the puck is not working, I paired everything but the puck is not working and ability to run the trolling motor from my solix 12 front and rear. There is no icon on the graph anymore! I am frustrated can u help?
@principleoutdoors89322 жыл бұрын
Hi James..this is very hard to do through KZfaq. Is your Motor an iPilot "LINK" motor or just iPilot? Does the Puck light up at all when you push and hold the button?
@NuclearPlaysMCPE2 жыл бұрын
Hey I have a power drive and the spot lock kicks around just got it this year?
@principleoutdoors89322 жыл бұрын
be sure to calibrate and the Bluetooth heading sensor will help
@CHIPPOFISHING3 жыл бұрын
why would my ultrex i pilot spot lock keep cutting off on a regular and or sporadic regardless of the conditions very frustration
@principleoutdoors89323 жыл бұрын
Be sure that you performed the calibration and maybe do it again. You can also call tech support at 1-800-227-6433 if that doesn't help
@ernie98192 жыл бұрын
Great video! I'm wanting to upgrade my trolling motor to one of the Ulterra's but no one seems to know when or if they will be in stock. Do you know they being discontinued by Minn Kota?
@principleoutdoors89322 жыл бұрын
Thanks Ernie! Ulterra is definitely not being discontinued for 2022. They are very hard to find because demand over the ;east 18 months has been way higher than expected.
@ernie98192 жыл бұрын
@@principleoutdoors8932 Thanks, I was concerned when I couldn't place a backorder on the Ulterra but other models I could. I'm looking forward to moving into the modern world of fishing!
@timb22942 жыл бұрын
I have a question about using the I-pilot link for trolling with a kicker. If I set my trolling speed with the kicker do I need to set a speed on the trolling motor? Can I set the I-Pilot so it will only hold a bearing and not speed? I basically want to troll without having to manually steer the boat
@anonimous596 Жыл бұрын
will the remotes and heading sensors ever come back in stock? I have the terrova (2022) that shipped with only the micro remote, Id like the full remote as well but still out of stock 7 months later - I know supply chain and all that but are they ever coming back in stock? the motor itself works great but the micro remote doesnt tell you prop on / off speed etc. would be nice to know all that.
@principleoutdoors8932 Жыл бұрын
Supply chains are improving for all industries and models now ship with full remotes
@68ray3 жыл бұрын
I have an Ulterra Link and a Helix 7 Chirp DI G2. I cant figure out how to pair them. What’s the trick?
@principleoutdoors89323 жыл бұрын
The Helix 7 needs to be a G2N, not G2. From there it connects via ethernet cable form motor and an AS EC QDE adapter
@andrewblanchard42654 ай бұрын
Does this allow you to pick a degreed heading? I.e. 240 degrees for big lake trolling
@principleoutdoors89324 ай бұрын
No but you can point the motor in the direction you want to go and it will hold that heading
@user-lu6il7cp2b Жыл бұрын
wonder if I can use a split transducer cable to hook my Terrova built in transducer And my original transducer at the transom to my helix 10.
@principleoutdoors8932 Жыл бұрын
Humminbird doesn't make a splitter for that
@steveide3276 Жыл бұрын
My Terrova iPilot is a 2011 model but has the link. Have not taaken it on the lake to pair with my gen 2 Helix & or Helix 5 on console. Nothing seems to hook up inside boat shed.
@principleoutdoors8932 Жыл бұрын
Did you use an ethernet cable and ethernet adapter to make the connection?
@johnrogers3781 Жыл бұрын
I have a Ultera with ipilot. Recently my motor while storing would not sit properly in the cradle. Instead of sitting horizontal it was sitting straight up and down and getting stuck. What could have caused this.
@principleoutdoors8932 Жыл бұрын
Easy fix, as this does happen occasionally...use this link kzfaq.info/get/bejne/d5ufgtWLzMvWeZs.html
@ThePikeHunter12 жыл бұрын
Great video. So, my question it would be, an MinnKota motor with i-pilot will work on spot lock mode without being connected with a fishfinder?
@principleoutdoors89322 жыл бұрын
Thanks Adrian. Yes, absolutely a motor with just "iPilot" will spot lock. You can also do cruise control, autopilot and some other great features
@ThePikeHunter12 жыл бұрын
@@principleoutdoors8932 thank you very much!
@Cowboy6843 жыл бұрын
nobody warned me that if i backtrack it will try to spot lock on random waypoints that it leaves behind. lost a downrigger ball and a half spool of seahorse cable when it spun me around in a circle! 😣
@JoeyVaillancourt-mp9dy3 ай бұрын
My Powerdrive came with a micro remote, can I upgrade?
@soosporter1 Жыл бұрын
Is there a button on new remote style to follow a heading only. For big water trolling.
@principleoutdoors8932 Жыл бұрын
yes, the AutoPilot button...just point the motor where you want to go and it will stay on that heading
@petera.di.salvatore44933 жыл бұрын
Hi. I would like to ask a question if its possible please. Is this working without Hummingbird. I have Lawrence HDS9 carbon model and also have 9 live model of Lawrence. If not is it possible to program it from the Ipilot to make it turn back on the same root where i have target it. Thank you
@principleoutdoors89323 жыл бұрын
iPilot Link only works with Humminbird. iPilot (without Link) has no connection with GPS/Sonar units and you can record tracks up to 2 miles long and follow them back
@petera.di.salvatore44933 жыл бұрын
@@principleoutdoors8932 thank you
@borisminkov1405 Жыл бұрын
Can I record track and follow track with the micro remote? Wasn’t sure if this is function only with regular size remote . Thanks
@principleoutdoors8932 Жыл бұрын
You would need the full remote for that. Or if it is a "Link" motor, you can do it on your Humminbird
@borisminkov1405 Жыл бұрын
@@principleoutdoors8932 gotcha. Thank you
@wawrzyszko Жыл бұрын
Do I have to disconnect the heading sensor from the battery when boat is in storage? Will the heading sensor drain battery when not in use?
@principleoutdoors8932 Жыл бұрын
Not at all...when the motorr is shut off , the heading sensor shuts down. Try it and you will see it stop flashing a few seconds after the motor is turned off
@johngoodwin27682 жыл бұрын
I just bought the Ultrex. It says Ipilot only but it has the wire you mentioned. But the end has 3 pins. Bassproshops told me that it will connect to a hummingbird. I am a bit confused now. You are saying that mine will not connect. Any input will help. Its the Model 1368800. Thank You
@u2ubecanadacollects9432 жыл бұрын
iPilot has one cable coming out...iPilot Link has two cables. The one coming out of yours is the US2 cable for the built-in transducer. There is an adapter to connect it to your sonar but it has nothing to do with iPilot functions
@desmondjohnson63606 ай бұрын
Add rivers and it would be great!!
@robbiebirr43973 жыл бұрын
how far can you mount the blutooth puck from the i-pilot head
@principleoutdoors89323 жыл бұрын
mine is right at the back of the boat with no issues
@fwmarine Жыл бұрын
Just bought a Minn Kota Terrova, with I-pilot link. My boat is equipped with a Garmin fish finder. So, it would appear that I should take the Minn Kota back and get one with just I-pilot.
@principleoutdoors8932 Жыл бұрын
Correct...the Garmin does not have the capabilities to control the Minn Kota
@billsimpson88022 жыл бұрын
Can I buy the little white puck for the power drive trolling motor
@principleoutdoors89322 жыл бұрын
If it is a PowerDrive BT, yes.
@marmac27689 күн бұрын
Does this motor connect to my Helix 7? Or, will I have to buy a new one? Thanks for the video! I just bought this motor and I'm trying to learn how to operate it.
@principleoutdoors89328 күн бұрын
I don't know which motor you bought....I have another video that covers this
@mikegonzales7073 жыл бұрын
Can you still use Spotlock on your Ultrex WITHOUT having installed the i-pilot puck?
@principleoutdoors89323 жыл бұрын
Hey Mike...yes you can but I would expect it to be less accurate. Very easy install and it is included with the motor so I recommend using it.
@simonkue3 жыл бұрын
Yes, that puck is only for Jogging
@mykedwyer64743 жыл бұрын
Any help to my question would be helpful. My 7-yr old Minn Kota Power Drive 2 just stopped yesterday. After clearing off thick mess of weeds, when I turned on to clear weeds off, I heard a click as if it blew a fuse? It just died? I unplugged from boat etc, plugged back in - still nothing? Battery was charged. Do these things have a fuses ? Is it toast after 7 years ? Any idea would be helpful. Thanks..
@principleoutdoors89323 жыл бұрын
Hey Mike...ckeck the wiring from the motor to the battery. some boat manufacturers put a fuse in the line. It looks like a block and could be blown. Also, if it was covered in weeds the motor may have drawn a lot of power trying to force through and if your boat has low gauge wiring, it can overheat and shut down
@mykedwyer64743 жыл бұрын
@@principleoutdoors8932 - thank-you so much from Ottawa, Ontario) That makes, sense - I'll ck for a few fuse today by the batteries. Have yourself a great day !
@mykedwyer64742 жыл бұрын
@@principleoutdoors8932 - by the way, just wanted to say I did as you suggested - replaced the fuse - and my TM powered back up. Thanks so much... !
@principleoutdoors89322 жыл бұрын
@@mykedwyer6474 Awesome! Thanks for letting me know Myke
@btv16762 жыл бұрын
I bought a power drive with the i-pilot remote this year. The spotlight in cruise control works great but the jog feature I can't figure out. When I am in spot lock and I touch any of the jog buttons the motor immediately turns spot lock off. Am I missing something? Is it is there a mode I'm not in?
@principleoutdoors89322 жыл бұрын
try this link kzfaq.info/get/bejne/ird4oMWS1NKxf2g.html
@chachi59752 жыл бұрын
Yeah I have the same problem. The link doesn't show anything but just pushing the button left, right, up or down. Have to play with this in the spring.
@joe224743 жыл бұрын
have to have a heading sensor to use the jog feature and i didn't get one with mine