Understanding turbo balancing

Рет қаралды 13,218

Turbo Lab America

Күн бұрын

Пікірлер: 25

@ichoozjc 3 жыл бұрын

Please do a video of the balancing being done! Would love to see it in action. So fascinating.

@bobross6677 3 жыл бұрын

This just reminded me why good tubos cost so much

@javierguerra9086 3 жыл бұрын

That's a 70' technology!! There are so many automated machines on the market now that will save you a lot of time!

@mrnurse4479 3 жыл бұрын

What will happen if the turbo is unbalanced? Will it lead to 100% failure?

@sethhughes2163 3 жыл бұрын

A Shenck balancer utilizing an air bearing is what we use....

@Lostsoul.668 3 жыл бұрын

Hello did you update your website? I’m looking to get my HE300vg rebuilt and upgraded, I looked on the video of 2017 idk if prices changed or how to contact and so on

@jmart24v49 3 жыл бұрын

Do you still offer hy35 upgrade?

@7.3clan41 3 жыл бұрын

Do you have a number I can you guys to get my turbo rebuilt?

@frontlinemedia4270 Жыл бұрын

So I just had a company balance my turbo wheel assembly. The turbo went out at 650 miles. My vehicle also would not go up to speed and I knew something was wrong, but didn't know until this went. It even appears that that the turbo vibrated so much that the support bracket bolt became lose on the block. What would you do at this point? What is the cost to balance a this?

@turbolabamerica Жыл бұрын

What do you mean the turbo went out? Is it leaking oil? Or does it not create boost

@joeyc4584 Жыл бұрын

Hi I rebuilt my f150 turbo. It was my 1st time I failed to balance them and they are chirping. From the unbalance. How can I send you mine ?

@ProjectCarTV Жыл бұрын

Bought a broken Heins TC3 balancer for a great price once. Too expensive to fix it. 😢

@strokerz2858 3 жыл бұрын

hi do you have gtx3584 turbin shaft for sale

@silver_n5442 3 жыл бұрын

@Turbo Lab America Where can I email you at to buy some turbos?

@turbolabamerica 3 жыл бұрын

Turbolabamerica@gmail.com

@Ayang1125 3 жыл бұрын

@@turbolabamerica I emailed you guys also

@turbocpt1 Жыл бұрын

You're like a layer, you speak without telling us anything.

@CharlesTun4 3 жыл бұрын

Is that a tub of playdoh on your work bench? 👀🤔

@turbolabamerica 3 жыл бұрын

We ran out of clay so we use play doe

@error-hb1mq 3 жыл бұрын

Following you for a long time, never imagined that you do not use a VSR! Yes, they are expensive, but you would be amazed on what level of unbalance you can get on the final assembled CHRA when only using the stage 2 balancing! Thei usually still get over the limit or they just have pikes of fluctuations, depending on the number of rotations! Big dislike for this...and i thought i should look up to you...i am extremely dissapointed...

@PokeChu0107 3 жыл бұрын

Not all turbos require VRS balancing at 150k+ rpms. Especially journal bearing turbos. I have a stage 3 Allroad with k04s that were balanced this way. And not a single problem and I have 60k+ miles on them so far of 25psi spikes and hold at 22psi. Now ball bearing turbos should be VSR balanced. But journal bearings normally don't need it. As the journal bearing doesn't spin. The only thing that spins is the turbine wheel, the shaft, thrust collar, and compressor wheel.

@error-hb1mq 3 жыл бұрын

@@PokeChu0107 your answer is so wrong that i do not know where to begin! Actually, only Holset say that their turbos do not need to be balanced, all other producers do. Also, balancing has nothing to do on wich parts rotate and witch do not. Next week i can make you a video vith a journal bearings big turbo vsr balancing, you will be shocked to learn that sometimes the unbalance is very big.

@error-hb1mq 3 жыл бұрын

Oh, and majority of the journal bearings DO SPIN in order to reduce turbo lag. There are alot of the Garrett and a small number of KKK turbos on wich journal bearings do not spin, and they ale locked in place, but the rest of producers make them spin so they have reduced "drag", as they can apool up faster that way. Trust me, i am a true turbo specialist and i have the knoledge, my only problem being the fact that i am not a native english speaker/writer.

@LMSILVIA 2 жыл бұрын

That machine looks a bit outdated and sorry but it seems there are a lot of holes in your knowledge or thats how you come off the way you speak about things....

@davidcatlin1970 Жыл бұрын

So I guess turbos from a 70's vehicle were junk? Enlighten us as to these "holes in understanding". Maybe you know what you're talking about, and we'll all be better together. Maybe you're just a narcissist keyboard warrior who doesn't know his backside from his elbow........ but likes to sound cool and tough and everything..