🔧 Undervolt Your INTEL CPU to increase FPS, Lower TEMPS & Use LESS POWER ✅

Рет қаралды 267,322

Күн бұрын

Optimize YOUR CPU Easily in 2023 👍 - 25% discount code for software: PAN20
Windows 10 Pro OEM Key (16.5$): biitt.ly/KVEYh
Office 2019 Pro Plus Key (45.8$): biitt.ly/Sul3E
Windows 10 pro +Office 2019 (60.1$):biitt.ly/TowHc
Windows 11 Home OEM Key( 21.1$ )：biitt.ly/pbz6f
Thanks for mediamz for sponsoring todays video!
How to undervolt cpu in minutes to fix intel cpu temps / lower intel cpu temps on ALL generations IF you cpu is supported, in this video we will cover how to easily and quickly undervolt your CPU to reduce the amount of power it draws, increase cpu efficiency leading to lower cpu temps, more cpu fps (sometimes same performance) and lower cpu power draw to dial in your CPU, save money (on energy) and increase your PC effiency on INTEL CPUs, AMD Ryzen cpus are also supported but will be covered in a seperate guide coming very soon - CPUs which are NOT supported with these methods can still be optimized easily and we will have something coming soon for that! This works on Windows 10 and Windows 11
Lets try for 5000+ Likes! 👍 For this Extremely helpful tutorial?! Do your part and hit "Like" now! Lag Fix + FPS Drop fix included! and feel free to suggest more & Subscribe! ✔️
This video will teach you how to setup and use CPU UNDERVOLT and best cpu settings 2023, for CPU fps boost, stuttering pc, fps boost all in this video! CPU settings / best processor settings to fix fps stutter in all games using the best settings for gaming in 2023 - providing lower temps and less power drawn to stop cpu thermal throttle, optimize cpu for gaming
#increasefps #optimizefps #windows11key
🔽 All links to follow along with this video are below 🔽
📌 Patreon - / panjno
📍 Prefer Shorter Content? 📍
Check out the 2nd channel! Same content, cut down into small bite size videos
Panj2 Here: kzfaq.info/love/FnS...
🔗🔹Tools, Software and configs to use!🔹🔗
▫️
▶️Other extremely helpful & Effective Optimization guides to follow ▶️
🔸 How To CLEAN Install GPU drivers for major FPS boosts & fix fps stuttering!
• 🔧 You NEED to be insta...
🔸 How To CLEAR ALL Cache in windows 10, 8, 7!
• 🔧 How to CLEAR All Cac...
🔸 How To Clear UPTO 30GB+ Diskspace Quickly & Easily!
• 🔧 How to FREE Up More ...
🔸 Ultimate Guide to Improve Performance in windows 10
• 🔧 How to Optimize Wind...
🔸 Ultimate GPU Overclocking Guide:
• 🔧 How To Overclock You...
🔸 nVidia Geforce Best Settings Guide:
• 🔧 How to Optimize Nvid...
🔸 AMD/Radeon Best Settings Guide:
• 🔧 How to Optimize AMD ...
🔸 Ultimate GPU Overclocking Guide:
• 🔧 How To Overclock You...
🔸 Ultimate Guide to Improve Performance in windows 10
• 🔧 How to Optimize Wind...
🔸 nVidia Geforce Best Settings Guide:
• 🔧 How to Optimize Nvid...
🔸 AMD/Radeon Best Settings Guide:
• 🔧 How to Optimize AMD ...
🎵 MUSIC BY EPIDEMIC SOUND🎵
- Tracks used in order
Howling - Lupus Nocte
Bowl Of Flour - OTE
Purple Corals - Midnight Cycler
Last Odyssey - ELFL
Creatio Ex Nihilo - Ave Air
Clearer Views - From Now On
Timecodes:
0:00 - Intro (Benefits of Undervolting CPU)
0:38 - What does undervolting do and how to do it?
1:36 - Getting INTEL XTU to undervolt WITHOUT using BIOS
2:58 - If your CPU isnt supported, there are other options!
4:01 - Using XTU to start undervolting CPU
4:30 - If you want to monitor temps, voltage & CPU performance (get these)
5:20 - How to undervolt CPU
8:30 - What if the PC crashes?
8:45 - If you would rather UNDERVOLT using the BIOS here is how (advanced users only)
10:30 - Once you've found your MAX UNDERVOLT
11:30 - Testing CPU stability when undervolted (add back 0.010v if crashes)
12:40 - Testing CPU at IDLE speed
13:18 - Benchmarks (Stock vs Undervolt CPU)
Disclaimer:
Due to factors beyond the control of Panjno/Panjnotutorials, I cannot guarantee against improper use or unauthorized modifications of this information. Panjno / Panjnotutorials assumes no liability for property damage or loss of data as a result of any of the information contained in this video. Use this information at your own risk. Due to factors beyond the control of Panjno, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, programs, or from the information contained in this video is the sole responsibility of the user and not Panjno.

Пікірлер: 398

@MrBigpappaT Жыл бұрын

Thank you for this, I was able to go from 95c under stress to 74c. Much appreciated 🎉

@AshesXNV 10 күн бұрын

ACTUALLY?

@potvinsuks8730 Жыл бұрын

Make sure to keep an eyeon the Cache as well as, undervolting won't do a darn thing if the cache is still sitting higher then the voltage

@pktgako Жыл бұрын

You have no idea how thankful I am for your video. I was able to get a -0.100V offset for my 9900k and went from 140w and 84°c to 110W and 73°c at full load with slightly better performance. Thank you !!!

@timotmon 9 ай бұрын

You gave yourself some headroom for overclocking. The 9900K is very comfortable at 85° you might be able to feed back some of that voltage and get it to a steady 5GHz.

@SeynGod 9 ай бұрын

@@timotmon Overclocking wears out the processor faster and we are looking for the opposite, reducing consumption, temperatures and increasing its lifespan.

@timotmon 9 ай бұрын

@@SeynGod This is an overreaction. unless you're constantly revving your CPU to it's throttle limit whatever degradation may be occurring is negligible at best. Even so performance is unaffected. I've had the 9900K since launch running at 5 GHz. It's always around the mid 80's during rendering and transcoding tasks. 5 years strong. I don't know why people don't trust the manufactures guidance either. The manufacturer is telling you these are safe temps yet all the enthusiasts have been stuck on 80 degrees or below for more than a decade now. It's just not true. Laptops hit 90 degrees all the time and other than having a hot machine they keep working as well. Unless you plan on using a CPU for 20 years then fine.. baby it all you want.

@sokantnevesti603 5 ай бұрын

@@SeynGod Underclock your cpu than,and don't touch the voltages,that is the best way to secure longevity and low temperatures.power consumption too,

@bartrolloos4204 4 күн бұрын

@@timotmon I managed to degrade my 4790K but it took me 10 years of 100% cpu usage. In the end it only operated at 3 Ghz and + 0,1 V. Now it's in my museum of much appreciated cpu's and it's finally at room temperature

@StalwartNightmare Жыл бұрын

OH MY GOD FINALLY! It should be a federal offense worthy of capital punishment for BIOS makers to have various UI's and wording. I couldn't find ANY tutorial that had my Gigabyte Bios on undervolting and google searches were vague, so I just used XTU which had an issue of randomly resetting it back to no offset. This finally explained what I needed to select to get the offset which was setting it to "Adaptive" THEN changing the offset. Google searches just said "Set this option to normal then change offset" which never worked/showed in XTU but having adaptive on was what I needed so thank you for uploading this video. Also, I am totally serious, there should be capital punishment for BIOS makers NOT having a uniform GUI with the same terminology/wording.

@vasildimitrov6661 Жыл бұрын

I loved the quality of this video, how helpful and straight forward it is. Thank you Panjno!

@DAEMONF1RE Жыл бұрын

I learned a lot from this video. Thank you so much for your explanation and easy-to-follow undervolting guide.

@xlRaqeD Жыл бұрын

I was able to undervolt my 12900KF by -0,180V and save ~80 Watts, max temps are also ~20°C lower and my performance is the same if not even better. I'm so glad I actually watched this video 🥰

@Typhon888 Жыл бұрын

you should see what a de lid plus liquid metal will do. Most of the times you can get 200-300mhz more OC at same or lower voltage.

@kn6836 Жыл бұрын

0.18v lmao i doubt it's stable

@xlRaqeD Жыл бұрын

@@kn6836 I did actually have to alter a bit but -0,16v seems to work fine for me now

@Captain_Kebap Жыл бұрын

Do you have to reactivate Core Isolation again when you are done?

@diomed96 Жыл бұрын

@@Captain_Kebap there was a comment here saying you should turn it back on after you've finalized everything

@haies09 Жыл бұрын

Earned a sub, Thanks for the detailed description

@bankaikun94 Жыл бұрын

Thanks! Amazing guide! I have the 13700k, was hitting 100C and nearly 300W under a stress test with Cinebench. Was able to reach 0.165V offset, and improved temperatures to a max of 84C with 190W. While increasing Cinebench score from 28000 to 30600. Really amazing, I think I got lucky with the silicon lottery too. Mind you this is also all in an SFF case with a 4090 pumping out its own heat. Edit: System failed after using prime95 and avx2. Had to readjust the offset to 0.135V. Cinebench remained relatively unchanged, however it runs stable on prime95 and avx2 now. I would recommend everyone to use those two softwares to also test your stability, as Cinebench might not be enough.

@therealalpha5430 Жыл бұрын

What case are you using as I was looking at doing 13600k in a few SFF cases that I was looking at with something round a 4070 ti? Also what itx mobo are you using that you are allowed to undervolt with? Is it the Z series?

@bankaikun94 Жыл бұрын

@@therealalpha5430 I’m using the NR200P Max. It comes with a psu and aio. Using the MSI Z790i Edge. And my 4090 (Suprim X) just perfectly fits the case. So I wouldn’t worry about fitting the 4070ti if you got the same case. I wouldn’t worry too much about the 13600k, as I believe that cpu can be one of the most efficient processors if properly undervolted. We’re talking about high 60C under load compared to low 80C for the 13700/900k. I should edit my post. I did testing with other software, such as prime95 and avx2. My system failed those benchmarks after a few minutes. So I had to tune it to a 0.135V offset instead. Been running stable with that. Cinebench scores were relatively the same and temps increased only by a degree or two and wattage increased to around 200W. As for prime95, that software really stressed the cpu, going to 95C with a 250W draw. But it was running stable after an hour of stressing with that software. I might play around with CPU lite load though, and see how stable and cool that will be.

@therealalpha5430 Жыл бұрын

@@bankaikun94 Thanks for the info! I was looking at that case the Lian Li A4 H20 and the Meshroom S as my final list. Or the potential new Dan Case C4 SFX when that releases since its a little bigger A4 that fits 280mm rad.

@PrivateTouch Жыл бұрын

@@bankaikun94 Currently running around 60C with 13900KS - Stock Voltage on ASUS MBO with just simple Kraken AIO, feel like I could for sure undervolt it for even better temps, but too lazy.

@StalwartNightmare Жыл бұрын

I love how I always see the 13th gen and temperature in the same sentence LMAO! I have a 13700k and it throws out some H E A T. I am only undervolting it now because its summertime and it's getting a bit TOO toasty. Also running only 3 stock case fans along with a DeepCool AK620 which is a solid CPU cooler. The case in question is the Lian Li Lancool II which is NOT a good case, I found that out by removing the front panel which is just plastic (not mesh) decreased my temps by 10 to 12c. So currently my PC has no front panel, tempted to buy the mesh front conversion but its money and I am so lazy.

@Shadowdoom547344 Жыл бұрын

I would recommend finding your best offset voltage through Intel XTU, then uninstalling XTU and setting the offset voltage in BIOS.

@AncientHunter Жыл бұрын

Why?

@pktgako Жыл бұрын

The reason behind that?

@jeeroylenkins3081 9 ай бұрын

@@pktgako From what I have seen, XTU lets you safely test your CPU when performing undervolts - if your system crashes during the stress test after you've applied an undervolt, it will revert your CPU to it's stable settings. I suppose if you do it just straight through the BIOS, you have no way of testing if your undervolt is going to be and remain stable or not.

@nicane-9966 3 ай бұрын

@@jeeroylenkins3081 this intel utility will boot with these settings from the beggining or you need to open it every single time?.... if thats the case rather unisntall the app and aplly those settigns in the bios and forget about it

@everything-bagel Ай бұрын

@@nicane-9966XTU can be set to boot with a setting profile you save. You can also set profiles to load for various programs. This is why I use XTU instead of making the settings in bios. Use standard settings for basic Windows tasks, and an undervolt-overclock profile for games. Also it takes quite a lot of work to test different configurations from bios if you are getting crashes from maxed out settings in certain applications

@seventhkishin3830 11 ай бұрын

I have a 10700K with a 280mm AIO and as of late been using my pc to backup/compress my owned movies. CPU usage is usually at 100%, 84C temp, fans at max speed, uses 150W and I just browse the internet while it goes on. I was getting past the -0.13V but the scores were getting lower. Tried playing low resource heavy games (disgaea) but get MAJOR STUTTERS. Results: I left my cpu at -0.1V and now I dont go beyond 72C, 80% cpu usage, fans are very quiet, 119W. However, I can do so much more now at the same time. Been able to play games with BARELY any stutters (rare; been enjoying darktide), compressing videos, backing up videos, having a mobile game on my other monitor and watching shows. I guess its because my CPU isnt thermal throttling. Thank you for the video and explaining what to do. I really appreciate it :)

@Raptor_i81 Жыл бұрын

Make sure to use heavy load tests like Y-cruncher , I thought my undervolting was stable with Cinebench until I start doing a long render for my work, then I noticed that HWinfo have errors in the final line called "Windows Hardware Errors" , if you get even 1 error then your UV is not 100% stable.

@legendteigen461 4 ай бұрын

you're a lifesaver dude, undervolting my CPU helped alot with the temps and improved the performance! Havent experienced any crashes either.

@vaan_dex7728 Жыл бұрын

Great video 👍! Panjno I am waiting for the power limiting version for people who cannot do this. Even though I couldn’t do this, I still found it interesting! 😊

@fanaticbeatz Жыл бұрын

Thanks for the instructions, I was able to get -0.100V offset for my 10700K cpu and have much better temps now. When I was testing the undervolt I had no issue with cinebench and went even lower to -0.14 but prime95 was crashing so I had to find a stable offset.

@Kriro85 6 ай бұрын

How do you manage to do it? I have the same proc but I get the unable to start ETU error or the program just stucks on the Intel extreme tuning utility screen.

@Gidrah Жыл бұрын

Motherboard manufacturers always go crazy on the voltage except for Asus. I've had my 10850k undervolted for for years and saw a significant temperature drop for negligible performance loss. Good job getting the word out. On a related note Ryzens newer CPUs with Eco mode and thier non X skus look to be an amazing compromise between value, performance, and thermals.

@user-sk3nf2vv4p Жыл бұрын

Does it work when you update bios?

@SolarNeonFlare 10 ай бұрын

Finallllyy a video that shows how to proper undervolt, ty

@MrVoayer Жыл бұрын

Well explained and well illustrated !!!

@blazeac5016 Жыл бұрын

Another great and informative video. Is there a chance you have an updated FPS/settings guide for Destiny 2. Lightfall is dropping soon and it would be great to see an updated video.

@marlo_0 10 ай бұрын

hey, aorus z790 elite ax, i5 13600, xtu undervolt have no impact bios undervolt with undervolt current protection enabled/disabled there is 0 impact on voltage draw/power consumption by CPU, nor thermals. Up to date bios. it seems like in bios is an option which overide that offset or adjust diference from stock one not allowing on drop under ~ 1.2 acctualy hwinfo shows 1.14 uder load all time 148w power consumption and always cinebench r23 ~ 23.4k any idea how make that undervoltage to make it work?

@Pallabon1 7 ай бұрын

Disclaimer: I'm extremely new to this, so I don't have much knowledge on this and am going off guides. I got the 14900k and tried undervolting it, but I can't really do much with it. When following your guide, I started with -0,050V, but Cinebench R23 instantly crashes, so I lowered it by 0,010V until it reached -0,020V. Then it could run the test once. The temperature also went down slightly, but from 96°C to 94°C. Compared to how much people are going down in this comment section and how different the temperatures are, this is very miniscule in my case. Also I'm very fearful of running the 30 minute test; I'm pretty sure my CPU will reach 100°C very early and I don't want to do that to my CPU for an extended amount of time. I have the Gigabyte Aorus Master X and everything seems to be on Auto, only the CPU mode was on a setting called "optimized". (This PC was built and tested by a vendor who sells pc parts. I don't know if they changed settings in the bios and I don't want to reset everything. Sure I could take pictures of everything, but since I'm not well versed in there, I fear that I may skip an important setting or so and fuck everything up.) Cooling solution is a 360 AiO by MSI. Currently, while gaming, I haven't experienced any high temperatures yet, so I'm a little optimistic that I'm not ruining my CPU with too high temps. Still, I would really like to have a solution to this, because I want this processor (and pc) to last me a long time and not have to change it again in 3 years. Maybe someone has an idea what could be done. I'm a little scared tbh

@killedbychuckles 6 ай бұрын

I'm having the same issue as you described with my 14900k with 360 aio. Did you ever figure out how to lower temps?

@Pallabon1 6 ай бұрын

@@killedbychuckles I monitored my stuff playing games. Currently, it's fine with a maximum of 75°C and average about 55°C. I haven't tested rendering a video, emulation or something a long those lines yet, so I'm leaving it at that for now. If in those cases, it gets too hot for a longer period of time, I might underclock and undervolt it instead of just undervolting, to get it under control. I asked in the Linus Tech Tips forum and the repliers all said, that it's fine; CPU's were made for higher temps and can run a while at 100°C with a stress test; it's only if that happens in your day to day activities or if it runs for a very long time at those temps that it's bad for the CPU (a stress test isn't day to day stuff). So I will just wait and see what happens with rendering and emulation once I want to test those things out. Currently I'm pretty happy with how it's working, even though I was concerned in the beginning; everything has been going smooth with low/adequate temps.

@Luganoo 6 ай бұрын

Checked because my experience is exactly the same lol, crashed at -0.050V in like 10 secs and lower than that there isn't really that much of a difference. Also have a 360 aio. The processor is too powerful I guess lol. Nice to see your LTT input, cyberpunk with Overdrive and Ultra settings goes hard on the temperature, it has reached a max of 90ºC for me so I will just keep monitoring it and if remains at +80ºC consistently I will just lower them or I might end up melting myself. Edit: Also one small little tip, reducing performance core ratio from x57 to x56 has eliminated 100% of the problems I have had with games crashing on start. This applies to other intel CPUs going from an odd p-core ratio to a lower even one (i.e. x55 to x54, x53 to x52).

@Steve0.0 6 ай бұрын

I’m having the same issue with my i9 14900kf. I have a 420mm radiator water cooler, and my cpu was running sometimes at 80c while gaming (which is not bad but I want my cpu to last and wanted lower temps), I did noticed a temperature drop when underclocking it from 57 to 55 in Performance core ratio and from 44 to 42 in Efficient core ratio and undervolting it to -0.035v or -0.030 any more than that will make cinebench crash or will make the pc crash. Let me know if you found a better solution I’m noob in this and don’t know much.

@jiaxuanng2396 10 ай бұрын

Solid guide, would love to see undervolted oc at some point

@frostraven23 Жыл бұрын

Undervolted my i5-13600KF to 1.140v, overclocked P-cores to 5.2Ghz & E-cores to 4.0Ghz. At 100% load in Cinebench R23 it draws 152/147W for the Package & IA Cores and doesn't exceed 72/73c and idles at 32-34c. I'm quite satisfied esp considering I have warmer ambient temps where I'm at.

@spacecore2077 Жыл бұрын

I have an i5-13600K, those idle / usage temps are very nice.

@Rakansaleh95 Жыл бұрын

I have a 13600KF too... What method did you use? XTU? and how many volts did you decrease.

@KAIKAO06 8 ай бұрын

@@Rakansaleh95 135v?

@xbenj9191 Жыл бұрын

😂😂 was genuinely looking at doing this today you hero !

@haies09 Жыл бұрын

Me too 😊

@Rhanoss Жыл бұрын

Also what i've noticed is that Intel XTU is great for finding your undervoltage value, but it won't save after restart. So going into the Bios to put in your undervoltage value seems necessary after all. I would've liked to jus tuse Intel XTU but after every restart the settings are discarded.

@Dave-kh6tx Жыл бұрын

xtu does keep your settings across restarts unless it crashes due to instability. it defaults back to default for this reason so you don't get stuck in a bootloop. but xtu is best used an in OS software and then cap the final settings in bios, uninstall xtu and put your core isolation securtiy back.

@JorgenVonk Жыл бұрын

If you find your optimal settings, can you just copy paste them into bios without any problems?

@bluecheese86 Жыл бұрын

when doing your videos can you show the diff in multiplayer conditions and not an apex training area? those places always have best optimization any ways cheers for all the info you provide

@fantic_24 Жыл бұрын

Hey there panjno!thanks for the video my cpu temps have been much cooler since i tried this! Also if possible can we have a tiny11 gaming review?

@gil80 5 ай бұрын

We have the same BIOS. If you notice when you set the offset voltage, at the bottom of the screen it says that it's only available if the CPU VCORE (Above) is set to Normal, but for you it is set to Auto. How come it works? Furthermore, once you've found the values you like with XTU, do you then apply them to your BIOS to make them sticky?

@Aaroneasdon 6 ай бұрын

I usually never comment on videos, but this video actually helped me out so much. Lowered my average i7 13600k temp when playing call of duty by 10 degrees.

@TheDBZCollector 11 ай бұрын

Went to bios after building my computer it says I'm using .9xx volts. Can't remember. At work as I write this. So does that mean it knew what I wanted at fixed itself accordingly?

@Rhanoss Жыл бұрын

Hey there, great video! I just built a new pc last weekend with a i7 13700k with NH-D15 and am in the process of undervolting. I've found that im stable with -0.11V offset in CinebenchR23. Ran multiple 10mins tests and was all stable. Then i tried out the Intel XTU stress tests and i instantly fail the AVX2 stress test and after a minute or two i fail the AVX stress test. Now im unsure how important the AVX and AVX2 cpu stress tests are for a gaming rig. Since im very stable on -0.11V offset with Cinebench23 but am failing the AVX and AVX2 stress tests on XTU, i have to lower my undervolt to around -0.5 or -0.6V to be able to pass those tests... Would really appreciate your insight on those stress tests in XTU! Thanks again for the video!

@marocel Жыл бұрын

I've heard C23 is less demanding than some previous iterations and other benchmarking apps, this might explain why.

@kn6836 Жыл бұрын

AVX AND AVX2 are instructions for the cpu, some game used it like The Division 2 so if you fail the test there is no doubt your system is unstable. Trust me you want a system that is stable.

@djacob9800 Жыл бұрын

Make sure you didn't click the overclock button, i ran the same test but it failed because i had it oc, passed it with 01.25v, crashed at 01.45v

@Snarkoid 8 ай бұрын

Thank you, very useful info.

@Russian__hammer Жыл бұрын

I have a i9 12900H and have not been able to undervolt this CPU on my laptop. Only thing i was able do was download throttlestop and bring down my wattage in TPL settings. Def looking forward to better options.

@attilakok 5 ай бұрын

For Intel 10600k I needed a older version of XTU to adjust the voltage. Thanks for the guide!

@GammaAkutabi 3 ай бұрын

Ty after the newest bios update that fixes the cpu baseline, I got to work on this. Not sweating while using the PC and less power usage. -.095 volt was the max I could do.

@Dubzye Жыл бұрын

Ah, finally. Regular uploads from the GOAT. 🙌🏼

@elstukov 10 ай бұрын

Also running as an administrator helps with the issue of not allowing installing the utility

@IAMLXM0 3 ай бұрын

Amazing video! exactly what I needed

@Flopz_fn Жыл бұрын

Thx sm, I have a 12900ks and when running a 10 min test I hit 100c in seconds, finally have an offset of 135v and running 85 max, currently doing a stress test to see if she lives out

@robertcras8151 Жыл бұрын

And, How did it go? I have a 12900k also and think it is quite warm standard. I am also looking at the thermal grisly to assist in this.

@jameshagans3725 Жыл бұрын

Great video. You have to turn off XMP profiles to get to the menu on your motherboard to set those values. When I turn XMP back on it defaults to the earlier setting with no undervolt. Have you experienced this ? Using Win 11 I91300K with Z790 Aorus Master. I was able To use Intel's XTU and under volt and get a great result but you have to leave the core isolation turned off for it to work. I had same issue when using the bios with XMP enabled. Hoping some one has solved this issue.

@PhilGoodzGaming 10 ай бұрын

I have an asus z790 motherboard but not sure where to go to turn core isoloation off. I did turn off my XMP profile and restarted my computer , went back into the utility to turn down my voltage but it just freezes when i do cinebench now.

@lilmexicopassthegas167 7 ай бұрын

in intel extreme tuning utility the manual tuning is greyed out by me... how can i fix it ? i got an 7700k

@TonyCantShoot 11 ай бұрын

after a few hours of playing with XTU and cinebench, I got a stable -0.080 with 30 minute test. I was able to run my computer normally on -0.100 but I would get a "bug report" error while running cinebench. I'm not sure if my settings are getting reset but when I restart my PC and run XTU again, it doesn't say -0.080 anymore but just 0.000. Is that normal or is my undervolt not being applied?

@ChakibTsouli Жыл бұрын

Should XTU remain open or load on windows start for these settings to be applied?

@SillyTwister739 Жыл бұрын

Thank you this cool down my gaming laptop

@diyaribrahim2831 Жыл бұрын

I am unable to undervolt my 13900K, I use intel Extreme Tuning Utility bot the voltage offset slider is greyed out, I have updated my ROG Z690-F BIOS to the latest version, I also enabled and disabled Undervolt protection in the BIOS with no luck. Could you please help in this matter!

@awesomebishek2530 Жыл бұрын

The only options I see for you is to buy z790 motherboard which is what i did too. I bought Asus Prime Z790 p WiFi board which is already supports 13Gen, DDR5 RAM. I also have "Intel i9 13900k CPU" and am being able to undervolt due to temperature issues.

@poppop8795 Жыл бұрын

Yo just wanted to say great background music this time around

@madarasoun3018 Жыл бұрын

My Intel extreme tuning utility doesn't allow me to adjust core voltage usage on 10700F. Can I still undervolt from BIOS?

@theandroids Ай бұрын

Does not work for me. Nothing is changing. TDP the same VID the same 3 tests already. Something must be overriding XTU right?

@shibabrataghosh6858 Жыл бұрын

Great video👌👌 Please make a video on how to undervolt amd cpu

@eggsclusive12 2 ай бұрын

Great video....thanks

@moanizm 4 ай бұрын

every different minus core voltage offset, except default; R23 always crash on my test. i714700K. not the PC. cinebench keep crusing. any suggest?

@springhour4504 Жыл бұрын

@Panjno any way possible you could go through and give every possible optimization for AMD GPUs and CPUs I have a 6950xt and a 5950x and Im having issues with stuttering etc I want to squeeze every little bit of performance out of windows and my AMD driver.

@paulsleighty 8 ай бұрын

I set 0.1000 on my 14700k and it reduced my max stress test temp down from 88c to 75c, only thing is I can't keep the settings between boots, it says I need some watchdog timer enabled, but I can't find that on my windows 11 install.

@baimar77 7 ай бұрын

hi there. I've got i7 10700k, undervolted down to -0.120v stable, its supposed to be oc up to 5ghz but once I open XTU, on the top right corner shows 3.8ghz only? why is that? could you help please?

@gametizandooficial4137 3 ай бұрын

My processor temperature does not drop at all. I have an I7 12700K and I did the procedure, I went to -0.095 on the Intel XTU which is the maximum it can do before the PC crashes. I went little by little up to this voltage, but in all tests, the CPU is hitting 100 degrees. I've had the PC for 2 years and I've never had a problem with it. I noticed it when one day I went to restart the PC and it was stuck at the boot screen, informing me that the CPU was at high temperatures. Then I downloaded the HW info and saw that the CPU is hitting 100 degrees. I bought the CPU bracket for socket 1700, bought thermal paste from thermal grizzly kryonaut and nothing helped. I have a Thermaltake TH120 Water Cooler. Can someone help me? Should I try to undervolt through the bios instead of using the Intel XTU?? I thank the attention!

@richcats7249 3 ай бұрын

extremely useful video thanks

@Venoom-ji5dj Жыл бұрын

I lowered temps by 12celcius but unfortunately it didn't boost CPU perfmormance. Anyone had same results?

@sdgbhenry5741 Жыл бұрын

Unfortunately I dont think I am able to undervolt. I have a i9 13900k with rog z690-f, 2024 bios update. I need the bios update to run 13th gen on the mobo but I believe the bios update that allows 13th gen also blocks undervolting. would there be any other way around this? (corrections are welcomed as I am new to building pc's and this is my first one)

@awesomebishek2530 Жыл бұрын

the only options i see for you is to buy z790 motherboard which is what i did too. I bought Asus Prime Z790 p WiFi board which is already supports 13Gen, DDR5 RAM. I also have "Intel i9 13900k CPU" and am being able to undervolt due to temperature issues.

@scottc2455 Жыл бұрын

There may be an option to disable undervolt protection in the bios. There is on Z690 boards from MSI.

@GriffinheartPlays Жыл бұрын

Hey-uhhh, why is mine grayed out? I'm using a laptop, the MSI GF63 Thin 10UC model and the option to lower the core voltage is greyed out for me, a lot of the options are greyed out for me actually T^T

@ohingres Жыл бұрын

11900kf here, and it craches on PassMark SSE test with -0.050v adaptative vCore on Bios... Is there anything more to do?

@equify2158 19 күн бұрын

Whenever I try undervolt in bios.. it doesn't lower when I check in HWinfo. But when i use the software it works but I don't want to use the software all the time.. any one know why?

@acewind2453 Ай бұрын

This doesn't work at all for me. I reduced the voltage in XTU until Cinebench crashed and the temperature and core voltage stays exactly the same.

@Geordie8t4DMZ Жыл бұрын

My PC shutdown after lowering 0.50. I then had to load optimised defaults. Is there something I have done wrong?

@slipinjimmy-9421 Жыл бұрын

Lower in smaller increments, 0.05 volts for example, then test stability until you reach the lowest possible voltage that you cpu can run at whilst stable

@ElohimMethh 9 ай бұрын

Will the settings revert after restarting the computer? Also, do I have to run XTU on background all the time for it to work?

@iamrustworthy9340 6 ай бұрын

Is undervolting only provided with a higher class intel mainboard like the z mainboards where Cpu overclocking is enabled?

@vk45dett 7 ай бұрын

Hi, I done the undervolting, but for some reason everytime i restart the computer. It goes back to default values ?

@rodrigovieira1838 6 ай бұрын

How do I set it to automaticaly apply it on startup ?

@IAMLXM0 3 ай бұрын

Any idea why my Core VID doesn't go down when I set the offset lower than -0.060? my MB is Aorus Elite AX and i'm using XTU like you showed

@C0nv3rsE Жыл бұрын

Done some tuning using the Intel Extrem Tuning Utility on my i7-11700k and it seems i cant go lower in voltage than 0.025V. Why?

@UpgradeLemonade Жыл бұрын

Have the same cpu and ya got the same result as you... Did you end up getting anything different since then?

@C0nv3rsE Жыл бұрын

@@UpgradeLemonade didnt bother anymore, left as it is

@patorikusutaru7483 3 ай бұрын

i can't undervolt my cpu thru xtu, but i can do it thru bios, i want to do it thru app since some workload is not very stable with undervolt. i use 13700kf on b660m motherboard, does xtu limited only to z motherboard ?

@austinmorgan8630 3 ай бұрын

Hey panjno! Was wondering if you could help me. I tried using xtu for my i9 13900k and I’m not able to undervolt whatsoever when stress testing with cinebench r23. I can go to -0.010v but that’s the most! I’ve seen people get a minimum of 0.040v and even up to 1.150v! If I disable e cores I can go to 0.040v. I plan on getting the Lga 1700 contact frame as I currently don’t have it but I’m not sure if that will even help :( what should I do?

@tossitupman 28 күн бұрын

when i did the intial lowerage to -0.50, the benchmark would freeze when itried to run it. previously when I ran it, I only got 2600 pts which sounds abysal,Im starting to think I've gotten a horrible processor. Intel Core i9-14900KF

@kmiller65km 7 ай бұрын

I stopped using xtu as it had a habit of randomly resetting my offset back to default. Far easier to underclock in bios with better results. I no longer need to disable core isolation. Test for at least 1hr with prime95 small fft for a proper stability test.

@En3rg3t1c Жыл бұрын

@Panjno Please make a video about processor undervolting through throttlestop

@justgaming7588 Жыл бұрын

what to do for locked cpu i7 1070H laptops bios dell vostro 7500

@mikewright2858 10 ай бұрын

On my new 13900K I have been able to get down to -.054mv offset, and only by setting the max on all p-cores to 5.5GHz. With my NH-12A air cooler, I stay just below the thermal throttle on most stress tests. Losing the 300 MHz "two core" speed doesn't bother me as it's not noticeable. Seems to get the 5.8 it needs a little more voltage, but I like the lower temps.

@feragamotv 6 ай бұрын

when you undervolt you lose mhz ? this affect mhz ?

@N0AHELL Жыл бұрын

i got i7 13700kf and corve voltage offset is grey and cant adjust why?

@kess0009 10 ай бұрын

Question, if I undervolt with intel XTU app, will this still take effect if I reboot into linux/batocera?

@LyTtLeHands 10 ай бұрын

so im having an issue and id why, i was only able to get my 13900K to -0.085v and was no longer thermal throttling, but when i went to go play fortnite i had a "out of memory" issue, turning back on core Isolation fixed it, but it reset my voltage offset after i restarted and i couldnt change it because i need core isolation OFF in order to go into XTU and changed it

@tri-unetrl3966 Жыл бұрын

Would undervoting my Omen 15 2020 laptop increase performance for music production???

@iGOTiceCream-yp2cl 5 ай бұрын

Hi. I'm using 13900k and just wondering if I should copy the p core and e core value in the vid?

@mmv3604 11 ай бұрын

MY laptop doesn''t let me to use any apps to undervolt, overclock or under clock my cpu, what do I do?

@silvestras2639 Жыл бұрын

i cant change the core voltage offset values its grayed out and i cant click on the arrows to change anything

@user-ib7fr4vw3z Жыл бұрын

my cpu temp spike to 60-75c when idle. but once i start using pc . it sit at 40c - 50 c. not sure what happened here. damn

@PhilGoodzGaming 10 ай бұрын

I don't know if it's my bios/motherboard not letting it work for me. I have an Asus Z790 PRIME-A WIFI MOTHERBOARD and when i take my voltage down cinebench won't work at all it just freezes so i tried lowering the voltage to .25 and it still didn't work. I can not find a way to lower it. When video editing or anything intensive on my cpu i always hit 100c and sometimes 102 or 103 and then it throtlles. Anyone have suggestions for me?

@moanizm 4 ай бұрын

Same..

@pullmeifinger 4 ай бұрын

Thanks for this! Got my 13700kf under control 😂. What do you think about disabling MCE?

@sumicumi6317 Жыл бұрын

at my intel XTU, it says overclocking is disable on this system and the core voltage offset option is greyed out...anyone know how to fix this?

@4rtoria Жыл бұрын

Chances are that your cpu isn’t supported.

@chadmann2724 Жыл бұрын

My locked i7-4790 told me over clocking would damage my system. My system with no overclock features, was running hot like it was overclocking… Opened her up to find the refurbisher used no thermal paste…

@b9bot148 9 ай бұрын

I have an MSI Z790 DDR5 WIFI motherboard and a 13th gen i7 700k and I am unable to go negative on the Core Voltage Offset.

@DistarBute 8 ай бұрын

same... idk what to do, i cant go negative in bios also....

@jeffreyphillips3419 Жыл бұрын

@panjno My score was lower after changing the offset. Why is this? Voltage was higher as well?

@Deltatwo3 6 ай бұрын

Geekbench is also good to test transients/idle/light usage. I would recommend geekbench 5 or 6.

@bigdog3628 11 ай бұрын

font is too tiny on my system and I don't seem to have the same sensors you have. Is vcore the same?

@kiz__ Жыл бұрын

Flying around in minecraft Java with elytra on 32 chunks is the best cpu stress test lol

@Jennacide. 4 ай бұрын

Love it, updated my BIOS and performance shit the bed, But downgraded the bios and performance doubled, Now I can't use XTU

@awym7524 Жыл бұрын

if you want to really check if your undervolt is stable try to stress test your cpu with prime95

@zverkokaradjordjevic3339 Жыл бұрын

I have a completely different window, and all the items are locked, I can't change anything, softvare is up to date

@Mrclutch1939 Жыл бұрын

(i7 3700k ) ( -0.075 V) i got 10 to 11 degree difference when it is on stress, and good performance also stable. good video.

@Undiadebirding 4 ай бұрын

Hi! This video are awesome but i cant apply to mY i5 14600k on B760 MB, the offset values are grey out. Anyone know why? Only Z chipsets MB?

@GabrielLyrio369 8 ай бұрын

I have an i7 13700f and can't disable the undervolt protection. The option in bios for Undervolt Protection is disabled but Intel Extreme Tuning Utility says the protection is enabled and it is preventing me to proceed. My CPU is thermal throttling and sometimes hitting 80° just by watching KZfaq videos on Chrome. I changed the thermal paste because of this and I believe it actually may have made the situation worse. This computer build is 2 months old. Did the CPU come with a problem or is this due to some bad installation or something else? I'm using the shitty Intel stock cooler but just bought a Noctua NH-D15S that will arrive in probably less than a week. So the Undervolt Protection in the i7 13700f is really unbreakable? My motherboard is an ASUS ROG Strix Z690-a and as I said the Undervolt Protection in the bios is deactivated. So am I doomed for eternity to be banned forever from undervolting my CPU? I don't even want to overclock and nothing, just undervolt. Intel is a son of a bastard for doing this.

@user-gt4vm2fd9r 7 ай бұрын

انا مثلك لا اصتطيع تقليل الفولت

@GabrielLyrio369 7 ай бұрын

@@user-gt4vm2fd9r किं वदसि, अहं अरबीभाषां अवगन्तुं न शक्नोमि, यदि अहं आङ्ग्लभाषायां प्रश्नं कृतवान् तर्हि कृपया विदेशीयभाषायां उत्तरं मा ददातु!