Set the delay time. So you don't have to be quick to save the frequencey
@joseph_donovan3 жыл бұрын
Many thanks for this. Much appreciated. More please! Best wishes.
@riflesrigsandradios46363 жыл бұрын
Thank you. These are great recievers and I've only just skimmed the surface of their capabilities! Hopefully it gets people going with them.
@Westlake2 жыл бұрын
Check to see if you have an option for a “delay” input while scanning a range of frequencies. :)
@cjdub5437 Жыл бұрын
im thinking of getting one of these but i was wondering what sort of range (in terms of distance) do you get with this radio and what antenna do you use because im not sure if ill pick much up from my location (11 miles from bristol airport)
@riflesrigsandradios4636 Жыл бұрын
You'll do quite well. I can get Bristol from my home location in Dorset, so they pick up really well. You should also be able to pick up traffic on the water too, seeing you won't be too far from the harbour. They definitely work better outside, but with an antenna upgrade, you should do well. I use a Watson w881 on mine.
@cjdub5437 Жыл бұрын
@@riflesrigsandradios4636 thank you very much, i really appreciate the information, your video was very accessible and informative by the way, great job!
@riflesrigsandradios4636 Жыл бұрын
@@cjdub5437 thank you. I've neglected the radios a little bit lately, so hopefully going to get back into it over winter. 5ye shack needs a makeover and 8ve got a couple of new antennas to put up, so hopefully some new content will be following soon.
@cjdub5437 Жыл бұрын
@@riflesrigsandradios4636 cool, im looking forward to it
@david_uk Жыл бұрын
Thanks. Do you know what the numbers are that appear top right corner when adjusting vol or sq? Usually 2.30 or similar.
@mall231 Жыл бұрын
How are you getting on iam thinking of getting one
@deenunya77353 жыл бұрын
You havent set the Search Banks To Scan Air Civil set a bank with hi freq of 136.0 and lower Freq of 118.0 Have you not set delay time to hold on a freq found, max is 5 secs Use a PC free Software to programe and to Control the 125 Scan 125 ..ARC Software
@enrique8613 жыл бұрын
Nice video. Can I change the frecuencies step to search? I obseved in Air channel advance in 83 in 83 numbers. And 456....frecuencie advance in 62 to 62. Thanks
@softmusic_uk Жыл бұрын
Hi Im from Poole...great movie :-) do you have any good Dorset frequency to share?
@colinjenkin20062 жыл бұрын
Can you please tell me if 150 mhz is available on the marine channel.
@riflesrigsandradios46362 жыл бұрын
Hi Colin. Yes the 125xlt will happily Rx all the marine frequencies.
@geredo17012 жыл бұрын
Here are your owner manual, it list all the available chanel in this book. manualzz.com/doc/o/buxnl/uniden-bc125at-owner-s-manual-introduction
@WelshLad.3 жыл бұрын
I've got one coming from Amazon. Can you adjust the squelch on this radio.
@riflesrigsandradios46363 жыл бұрын
Yes you can. Full details are in the instruction manual.
@davidjones60102 жыл бұрын
I got a scanner I have used a telescopic Aerial and still cannot pick anything up
@riflesrigsandradios46362 жыл бұрын
What's your location?? There's usually something to pick up. Also the telescopic antennas don't seem to perform the greatest, but that's not to say you wouldn't pick anything up at all. If you scan the airband frequencies, you should certainly pick up something. Make sure your squelch isn't set too high as well.
@davidjones60102 жыл бұрын
I have picked up amateur radio channels I’m from the South Wales valleys do I need to get an aerial fitted on the roof to pick up more
@alannorthdevonuk7632 жыл бұрын
Try checking your squelch control. If it's up to high it will filter out all signals, try setting it to 2, if still hissing slowly go up.
@colinjenkin20062 жыл бұрын
I have just bought a new one and it keeps showing all channels locked out.Can anyone please help
@riflesrigsandradios46362 жыл бұрын
Press 1,2,3 etc to open up channels.
@colinjenkin20062 жыл бұрын
Thank you without your help I would have given up
@riflesrigsandradios46362 жыл бұрын
@@colinjenkin2006 no worries Colin. Any more problems then just ask. Gary.