If you're planning on buying any Ubiquiti gear and want to support me use the affiliate links below :) ▶Ubiquiti USA Affiliate Link: store.ui.com?a_aid=MacTelecom ▶Ubiquiti EU Affiliate Link: eu.store.ui.com/?a_aid=MacTelecom

Hey there! Thank you for the overview on this! Looking into adding access control to our church main office to keep our bathrooms from being vandalized during the day.

Nice video Cody. We should be adding access control to our church doors for the day-care area. This is a good over view to show what can and can be done.

Couple comments: 1. It is 1/3 Amp, not 33A some could be confused, this is a small device. 2. The din rail mount, it actually pushes onto a din rail and snaps on top. This is actually a part i dont like, now when you plug in cables while mounted, it tries to disengage the mount, the spring load should be on the bottom.

I wish that UniFi would add NFC to the G4 Doorbell Pro so that it could be used for home access control.

I was so confused for the first 3:20s I thought the new control unit only had two inputs on the left and three on the right or I thought it was the reverse of the unit. Finally realised that it's jsut a cardboard cover over the front of the unit. Great review as always.

Helpful video, thank you! If you can tell us about unlocking with phones and other mobile devices, that would be cool.

more stuff about this kit: - Many cell phones randomize their NFC tags now so you cant pair MANY models of cell phones with the reader including the google pixels, rendering the NFC functionality useless. - Notifications on the Uifi Access app are broken and are unreliable, so there is about a 30% chance the door attendants will get the call. Ive seen the access reader calls not work on 8 of 10 cell phones.

Love the vid's...Always Amazing! 😍 Waiting for full upcoming Install Video, these are even better & amazing to watch Ubiquity Devices in action as it's perfect-perfection. Love Ubiqity so much. 😊😅

I have a perfect project for this! Back gate strike lock, I can put my old g3 flex to capture then Front of the gate and then another to capture the back side, just wondering as this is the gate I bring my motorcycle in do we have a setting that will allow ai to detect the number plate then unlock the lock 🤔 Would work so well zip in form work don’t even have to get off the bike 😂

I've installed a feu and they are indeed sleek, still for some reason most clients like the Gen 1 more in design.

Hi Cody, do you know if the Yale Smart Key tags or any other brand work with UniFi? I expect we are tied to Unifi Keys tags.

Do you know if the access electric lock works with typical push bars?

HI , thx your videos are great , we just install the G2 , but the door lock is working on reverse , meaning it locks when we unlock , would you know how to have this fixed

I hope they also release a physical numpad. It's frustrating to use a small touchscreen in cold climates.

Is there a way to add multiple cards at once, instead of just adding 1 card per door at a time? This doesn't seem very enterprise friendly unfortunately.

Will these work with any NFC cards. Something less expensive if my church where to go with this.

Hi Cody, thanks for doing this videos! Quick question, the Electric Door Strike, works randomly (the setup is correct), it happened to you? could be a defective unit?

Hello, greetings. I'm a fan of your Ubiquiti technology videos... I hope you can help me with something... we are installing Ubiquiti technology in the headquarters of the company I work for in Venezuela... part of that technology is Telephony... but the system does not allow us to use Venezuela even though the line is analog... any advice?

Interesting video; although I'm not using it. Do you know when you might release the full Unifi setup 2023 video?

Hi Cody, Hope you're doing well. I'm reaching out because we're experiencing some issues with our door access settings. Currently, we have the doors set to open when a specific person arrives, and this works perfectly from 8:00 a.m. to 12:00 p.m. Eastern. However, at 12:00 p.m., they should lock for our lunch break and reopen between 1:00 and 5:00 p.m. Eastern. Unfortunately, the doors stay locked after 1:00 p.m., and we can't figure out why. I've tried a few times, and it seems to work initially, then stop working. I'm not sure if there's a glitch or if I'm setting it up incorrectly. Your expertise in Ubiquity is much appreciated, and I trust your guidance more than customer service explanations. Looking forward to your advice. Thanks for your help, and we'll definitely support your live stream with some coffee funds soon. Best regards, "Reflect who you are!" #Ubiquity #AccessControl

Hi, do you think that install this system into a apartment door worth? Thanks for your videos

Hi, what poe switch did you use to power up the hub?

Do you know when you will be uploading the install video?

Hi Cody, what happens if the hub cant reach the UDM but has power? Does the user information get stored locally on the hub? Looking through the UI forums, it seems if there is a power loss the HUB maintains some settings in regard to scheduled unlock? Im thinking in the event the UDM loses power before the HUB it continues to work on the last configuration?

Hey Cody, does every door need an Access Hub? or can one hub control multiple doors? Also does the Access Hub have the ability to do contact sensors? Can the access hub sound an alarm if a door is opened? like my Brinks alarm can it trip that?

I want... :)

Nice video

Is the G2 Pro weather proof / rated for outdoor use?

Does anyone know if you can use a UniFi PoE++ Adapter rather than a $700 24 port pro switch? I have a client that need one door with an electric lock and I doubt they want to spend the extra money for a $700 switch if we can use a $30 UniFi PoE++ Adapter. Thanks

Stupid question, possibly. Do you have to buy one of those kits for every door (for the lock/unlock feature) or can one do multiple doors? IE: you need one panel per door?

Can we use the same nfc card to multiple site?

Hey, sry for my Question in bad Englisch, I have an aluminum door with an electric locking system, where I can connect the open function with two cables. Can I connect this to the system or do I need to change the electric strike on the lock? Many thanks for your help

Hi, stupid question, how can I use ONE G2 Professional to manage the entry of a single door for two apartments in the house.

Hi Cody, this new hub controls 2 door? Door1-maglock/sensor/rex sensor Door2-maglock/sensor/rex sensor Much appreciated😀

Is it possible to configure mag locks to auto unlock on power failure?

How many users are we able to use for free on unifi acces??

Can this be connected to a fire alarm system?

is there or will there be a subscription fee

why dont they add fire integration in the software? we want the hub to receive a fire signal from the buildings fire module and activate emergency evacuation on all hubs in the network...

I would love to add these to a couple doors, but they are just to expensive.

wait... you can't unlock the door remotely? really?

I thougt there was an g1 elevator kit

Does this system require internet access to function?

---> POINT