Connect the car jack to the table, and you will be surprised by this idea !

Рет қаралды 304,271

13 күн бұрын

Hi friend. I made a great video for you in which I used a car jack. I have turned it into a very useful mechanism that may be useful to you!
Friends, my name is Vanya! I am the author of the channel HandCraft.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy

Пікірлер: 103

@hand_craft 12 күн бұрын

Hi, I hope you liked this mechanism) Rate from 1 to 10

@beaverworks1969 12 күн бұрын

Ten points 👍

@HillbillyJim72 12 күн бұрын

I see it as a 10 !

@kevinjohnson2528 11 күн бұрын

Definitely a 10 from me

@pereezd_na_Kuban_emi_immigrant 11 күн бұрын

@pauluspriems4442 11 күн бұрын

Very nice. 10

@S.Acosta-yg6od 9 күн бұрын

Wow, curiously, for at least 15 years I've been thinking about doing something similar for my use, not with wood, but i do more things with metal, but was never been able to figure out the way to do it, and now you've shown me how to do it.. thank you very much.. that's a super great idea..

@TopCat2021 12 күн бұрын

I'll give it a 10 Genius!

@hand_craft 12 күн бұрын

Thank you for such a high assessment! I am very glad that you liked it)

@mygarden365 11 күн бұрын

This content, is great work. Very worthwhile.

@andrewjones-productions 11 күн бұрын

That's very clever! You deserve 11 out of 10 for that!! To be honest with you, I think that if you mass produced that table, it would very likely sell! As you demonstrated, it is operable with a load on it. I would love something like this (a variation of your design) that is a storage frame/box that allows me to load fully laden box/frame onto a trailer (or van) without any lifting whatsoever.

@tenncutt 10 күн бұрын

Thought I was going to die of old age before I figured out what you were doing! I was impressed in the end!

@Lutzboater 11 күн бұрын

Very unique and a very nice cart. I'm sure the kids enjoyed riding around on it.

@RPO6464 9 күн бұрын

Very cool work bench. I definitely give it a 10. Good job!

@ussling 21 сағат бұрын

Brilliant execution. Put blue thread lock on the bolts or replace with longer bolts. In military aviation, a minimum of three threads showing after the nut was tightened was mandatory.

@beaverworks1969 12 күн бұрын

I really liked the idea! Of such systems made on KZfaq, this one is one of the best 👍 Continue on

@onjofilms 11 күн бұрын

Cool. I think I'll use that jack to create a scissor lifting table.

@qwe1231923 11 күн бұрын

Thenk you man

@alsnyder1660 11 күн бұрын

It's a 10 for me. And I'm immediately impressed... you seem to have cut the shaft off at a nice 90 degrees. I can't cut or drill at 90 degrees even if my life depended on it.

@PaulJones4968 8 күн бұрын

Nice video, but adding 2 rolling casters and 2 locking casters wouldve sufficed

@paulpalomo417 11 күн бұрын

10 👍. Fun project to watch as well!

@SilasLennonJr 12 күн бұрын

Wonderful addition!!! 10 ⭐ Rating!

@hand_craft 12 күн бұрын

I am very glad that you liked it! Thank you for such a high assessment👍

@traceyluck8722 11 күн бұрын

10 could you post where you ordered the Jack from, I don’t think we have that kind in the US, thanks and great job and idea.

@stevetaylor5269 11 күн бұрын

That's a standard Mercedes jack, go to any wreckers

@MachineEarth 8 күн бұрын

Trailer tongue jack.

@bobh3394 6 күн бұрын

Great idea and plan!

@manuelpavan1647 11 күн бұрын

Bellissimo lavoro! come hai mostrato, col tuo meccanismo anche un bambino potrebbe spostare quel banco da lavoro

@jamesgiovagnoli7754 8 күн бұрын

Nice modification, but it's not really a feature of the jack if you change its structure so much.

@CoolIdeasDIY-qv1nz 11 күн бұрын

Great job, man👍

@viorsa8200 12 күн бұрын

Ok, fantástico trabajó maestro, gracias por compartirlo.👍🤓😜

@jerryodell1168 12 күн бұрын

Awesome idea. Its a 10.

@hand_craft 12 күн бұрын

Thank you sir for such a high assessment!

@MarkEichelberger-cw6cb 12 күн бұрын

That's an awesome table set up...I need one adjustable in height...18 inches of travel... can support and raise/ lower 1500 pounds... and is 12v powered ... and either end independent raise/lower from the other

@cebithwala4161 10 күн бұрын

I am giving it a 10/10 brilliant 👏 idea 😃

@MrNovruz 10 күн бұрын

Hi friend

@user-jb7lv1qs5m 8 күн бұрын

Это можно сделать с помощью двух рычагов.Если посложнее-одним. И не портить домкрат.

@DonDomel 12 күн бұрын

absolutely fantastic !

@fred-san 11 күн бұрын

9 rolls near soil price ?

@MachineEarth 8 күн бұрын

It's very nice, but couldn't you use a locking lever to do that?

@user-lu8lf7lh8m 11 күн бұрын

Стол с вертикальным взлётом))

@AndrewPinkFloyd 11 күн бұрын

Genius! 10/10

@Majorkooldad 9 күн бұрын

Nice cart, Well thought out! a 10 for creativeness and usability :🙂

@mariodelmanso9345 11 күн бұрын

Geniale e semplice da realizzare: complimenti!!👍👍

@georgechalifoux4668 4 күн бұрын

That’s awesome👍🏻👍🏻👍🏻👍🏻

@USMC1984 11 күн бұрын

9.5 lol. It would have been better if it were a metal table! ( from a welder…lol). It’s a great idea, this could very easily be incorporated on to a vice stand or movable welding table.

@ron827 11 күн бұрын

An over center foot operated lift would be much simpler.

@maobfh 11 күн бұрын

Really smart!! I would give it a 99/100

@matthewwalker7024 11 күн бұрын

Not an idea I've seen before. Great job 10

@MCsCreations 11 күн бұрын

Amazing work, dude! That's just brilliant! 😃 Stay safe there with your family! 🖖😊

@foxwhiskey 10 күн бұрын

Of course a 10 !! Great job and a really useful idea ! 😊

@5774222 10 күн бұрын

Супер идея 👍

@MrDan7171 8 күн бұрын

Very ingenious idea but also very overly complicated for its use. There are much easier ways to accomplish this, i have a table that uses a simple pull lever to to do the same thing and is a much simpler process to build.

@dreamkiss4u 10 күн бұрын

Hmm you know they sell wheel casters that you step on an they lift then step on the small lever next to it an they fold back up , and they don't cost much at all that can do the same thing.... just saying.

@ClassicSteelRC 11 күн бұрын

Awesome video and a 10 on the table!!! 👏👏👏

@123232ism 11 күн бұрын

Brilliant....10. Excellent video work too.

@mrgodBG 11 күн бұрын

great idea! until last min i was like wtf is he building??? 😂👌

@user-px7zf9tr4y 11 күн бұрын

Хорошая идея для станков в мастерской

@shallowgrave2642 10 күн бұрын

Если у вас валяется в ведре домкрат колëса, болты и гайки, фанера и клей. То да хорошая идея. А так это, чугунный мост.

@user-px7zf9tr4y 10 күн бұрын

@@shallowgrave2642 в столярной мастерской всегда не хватает места. Возможность перемещать станки очень хороша.

@lonpowley 10 күн бұрын

10/10 cool project.

@tielkgate 9 күн бұрын

Nice!🤩 Lowell

@bradleytuckwell4881 11 күн бұрын

What a great idea

@moisesgomez5593 11 күн бұрын

Me gustó mucho el sistema es muy original, pero no logre entender el mecanismo

@musiquepourmoi11 11 күн бұрын

Très bien: 10

@JohnJohnsTinShedSnyman 10 күн бұрын

10/10......awesome idea

@h4z4rd42 11 күн бұрын

10! That's a LADA jack, right?

@mikeelwood8626 11 күн бұрын

Solid 8!

@ingokuhn4192 9 күн бұрын

So ein Aufwand für ein Tisch mit Rollen, so kann man auch die Zeit vergeuden 🤦‍♂️

@mikebarrett3428 11 күн бұрын

Sweet!

@jamesalmsr.7493 10 күн бұрын

10+ great work

@marcoaureliobarbiero80 10 күн бұрын

very good!

@the250mikec 11 күн бұрын

9👍👍👍👍👍

@markduggan3451 11 күн бұрын

Cool.

@user-xl2ls2cm3m 11 күн бұрын

в поддержку канала 🤔

@soundlydiy 11 күн бұрын

Cool ❤

@PeterNetped 11 күн бұрын

@billlichirie14 10 күн бұрын

😁👍

@stuartkorte1642 11 күн бұрын

Yes, 10

@aungsint9058 11 күн бұрын

what it is balls size number??

@user-xl2ls2cm3m 11 күн бұрын

залипательно 👌👌👌👌👍👍👍👍😅😅😅😅

@AlainStar 12 күн бұрын

🙏👏👍💪

@chuckclark9464 11 күн бұрын

👍👍👍👍👍🤜🤛

@kriss2787 8 күн бұрын

@charlesslack8090 11 күн бұрын

Photo on video cover has nothing to do with the video = 0 Execution of an idea = 8 Practicality of end product = 5 Materials used = 6 Questionable use of plywood for moving parts under stress Cost of materials = 4? Dependent upon longevity of apparatus could be a 1 Video enticement to build one for self = 1 Good luck with your next idea.

@hand_craft 11 күн бұрын

Hello. Thank you for such a detailed assessment of my work. I will correct mistakes and get better)

@charlesslack8090 11 күн бұрын

@@hand_craft Keep in mind that they weren't mistakes, they are all just learning opportunities. 🙂