Check out our full Universal EZ Lip Splitter installation guide at www.ezlip.com/installation
PREPARATION: Careful preparation is important for maximizing the life and durability of your EZ Lip. Clean application area using isopropyl alcohol (test a small unobtrusive area for color-fastness). Application area must be completely dry before installing your EZ Lip.
FOR MAXIMUM LIFE: For long lasting strength and durability, apply when temperature is at least 72º F (21º C). In colder climates, apply heat to the tape using a hair dryer or heat gun to help strengthen the bond.
STEP 1 (PEEL): Peel protective film from tape starting at one end of the EZ Lip and attach to the surface of the vehicle.
STEP 2 (PRESS): Continue installing to the rest of your vehicle while making sure to firmly press and hold the EZ Lip for several seconds against the surface of your vehicle. Make sure to eliminate air bubbles and gaps.
STEP 3 (CUT): Cut excess off with sharp scissors.
CLEANING: Clean the EZ Lip the same way you would clean your car. Using soap and water will help eliminate dust and grime build-up. Do not wash vehicle for 24 hours after installing to give the tape time to cure.
SHINING: You can easily give your EZ Lip a nice glossy shine or help eliminate scuffs by applying tire-shine or Armor All to the surface.
Check it out installed on your car at: EZLip.com/gallery