Thanks

Thank you very much!

Glad you like it

👍

Glad you liked it!

If you want to see what a trailer looks like hauling a jetski a motorcycle in the barbecue pit plus a large tool box give me your telegram name I'll show you what I built

i made a slideshow video for KZfaq of my Motorcycle Jet Ski & Barbeque Grill Trailer kzfaq.info/get/bejne/q9OYmclmnKjXmH0.html

Thanks

Thanks!

Thank you 🤗

Thanks

Thanks ✌

Thanks

Thank you

My is 102" , but 2.5 meters is totally doable

Thanks

kzfaq.info/get/bejne/q9OYmclmnKjXmH0.html

Steel is way cheaper than aluminum and the trailers are not that heavy. I did not weight them but I can pick one up of the ground myself

Sorry, no time

@@jaceksuchon4717 I will make it sooooo worth it for you ?

Yes

@@jaceksuchon4717 how can i contact you ?

Thank you

How will I tow two skis at once?

@@jaceksuchon4717 using the original dual trailer. I may have miss understood but I thought you had that already. Or build an actual dual place trailer. Only issue I can see is there are different stresses on the sections of the trailer. Suspension can only handle so much force, and absorb so much impact. So if you hit something in the ground, only one trailer is taking the impact and reacting it to, not both sections so they would be pulling and fighting against each other. Same as if you hit something with a center tire, the one next to it may miss it and cause the impact forces to stress against the trailer that is not reacting to anything. Be mindful of the wiring for the lights too. I would have the center lights still come on when the running lights are on because you are over 80” wide and need ICC lighting (Federal requirement, and each state requires it) since you are in the US. So the center lights should still be lit up to show the width of the trailer at night.

@@PTRRanger951 It's not shown at night. I would HOPE that the running-light wire is run to both sides. Personally, I'd wire it so that both lights on the left trailer light up for indicators on the left, and the same for the right. So every light gets the same amount of use, the middle brake lights still work as intended, and it doesn't get messy.

I can see this trailer setup being useful for things other than jetskis too. Like a motorcycle trailer, where it WOULD be a good thing to separate the trailers before going to the river. Leave the bike trailer back at base camp. (Or a supply trailer, or any number of other modules). Personally, if I were designing a trailer like this though, I'd leave it normal width with a center rail at all times, and just have slide-in modules on dollys, including the jetski, motorbike, and cargo modules. Because then I wouldn't have to put a specific module in a specific spot like this design has to.

@@NikkiTheOtteragree. There is a company in the US called Shadow Trailers that make various trailers. One of the ones they make is a universal one that has a flat bottom. It has receivers, the same for a trailer hit for a vehicle, mounted up and down on the floor in certain spots. You put the bunks for the skis into them so you have a jet ski trailer. Remove them and it’s a flat deck trailer for anything else. They make it up to a four place trailer for 4 skis so you can have two skis on there and a quad, or three skis and a motorcycle or luggage or anything else. Remove them else and haul a car or UTV. It’s truly a universal trailer.

No patent

@@jaceksuchon4717 you should get it

@@RY4NP It's not a new idea, not patentable.

@@jaceksuchon4717 Please comtact me i am very interested in a few of these