Unleash The Power Of Your Gopro With Gopro Labs! Get The Latest And Greatest Features Today!

Рет қаралды 12,535

Күн бұрын

#goprolabs #goprohero11black #goprohero10 #goproheroblackgoprolabs #gopronewfeatures
GoPro Labs gives you access to innovative, exciting and creative new features before they appear on a future GoPro camera!
GoPro Labs is currently available to use on HERO11/10/9/8/7 Black, HERO11 Black Mini, and HERO5 Session.
Simply download firmware from the GoPro Labs website, put the update onto your GoPro then use QR codes to instantly change the settings on your GoPro Camera. How awesome is that?
Access GoPro Labs here; gopro.com/en/us/info/gopro-labs
Thankyou for watching my video.
To learn more about the amazing GoPro Hero, check out this video next :
• GOPRO HERO 11 vs GOPRO...
Chapters:
00:00 Introduction
00:31 How to download GoPro Labs firmware
02:26 How to update your GoPro with GoPro labs
03:18 How to create your own QR code using GoPro Labs
05:28 How to put your QR code on your GoPro using GoPro Labs
06:28 How to use QR Control to put QR codes on your GoPro using GoPro Labs
07:48 How to use the QR Control Mobile App to put GoPro Labs QR codes on your GoPro
10:23 Using GoPro Labs QR codes to film slow motion footage
10:36 How to use GoPro Labs QR code to film a sunset timelapse
10:50 Outro
Equipment used in videos on this channel:
GoPro Hero 11 Black: amzn.to/3TRmnaz
GoPro Hero 9 amzn.to/3oJZyay
GoPro Media Mod : amzn.to/3oJZyay
GoPro Double Camera Mount :amzn.to/3U7yxfo
GoPro Hero 9 / 10 Replacement lens : amzn.to/3tNPEcd
GoPro Suction Cup Mount: amzn.to/3GAqDo2
GoPro Bite Mount and Floaty : amzn.to/3FdW0DE
GoPro Handler : amzn.to/30Lh1HQ
GoPro 3-Way: amzn.to/30Lh1HQ
GoPro Magnetic Swivel Clip: amzn.to/3oJZyay
GoPro Mouth Mount: amzn.to/3HGuYqk
GoPro Volta: bit.ly/3ybjGIN
GoPro Zeus Mini Light & Magnetic Swivel Clip: amzn.to/3O26N93
Telesin GoPro Hero 11 /10/ 9 Mini Storage Cover :amzn.to/3DIjKlY
HSU All Aluminium Alloy Extension Arm Kit: amzn.to/3yl5o8e
DJI Osmo Action Camera : amzn.to/3oJZyay
Samsung S10+ : amzn.to/3cyP2xa
Smart Phone tripod holder /adapter : amzn.to/3DlVi8D
Phone holder, Gooseneck mount :amzn.to/3DKNpLd
Ulanzi VL49 Video Light: amzn.to/3NlRlFn
Fitstill waterproof GoPro 3 way tripod for GoPro :amzn.to/3sGJSan
Newer 6 x 9 feet Photography Backdrop /Background : amzn.to/3SPJv7W
Manofrotto Compact Aluminium Tripod: amzn.to/3b3eSM9
Snowball Ice USB Microphone. amzn.to/3oOrKsL
Iron tree Microphone arm stand amzn.to/3nBvHBQ
Microphone Pop Filter : amzn.to/3OLcAAd
Sandisk Portable 500GB SSD : amzn.to/3kY25Nr
Micro HDMI to HDMI cable, 1.8m amzn.to/32c3Ob9
San Disk Extreme Pro 512GB amzn.to/3HLefTB
Canon 200D SLR Camera - updated version amzn.to/3oK35pk
Rode Video Mic amzn.to/3HM84hR
MacBook Pro 13 inch (2016): Latest version available: amzn.to/3HJto7B
I also feature Action Camera accessories from HSU in my videos including
the Windslayer : hsushop.com/products/hsu-wind...
and the Shoulder Mount: hsushop.com/products/gopro-he...
if you enter the coupon code Adventure Tim when you make a purchase , you will qualify for 10% off the regular price.
How awesome is that!
Try Amazon Prime for free for 30 days! www.amazon.com.au/?tag=advent...
Try Amazon Prime Video for free for 30 days! www.primevideo.com/?tag=adven...
Try Amazon Music for free for 4 months! Wow! www.amazon.com.au/music/unlim...
Try Amazon Kindle Unlimited for free! Unlimited reading and listening for any device! www.amazon.com.au/kindle-dbs/...
The above are affiliate links. If you make a purchase using one of these links I may make a small commission but at no cost to you.
Thankyou for your support!
You can also connect with me on social media!
linktr.ee/adventure_tim
All the great music used in this video can be found at at uppbeat.io
Click on the link below to create a free account and find the best royalty free music for your next video.
uppbeat.io/?as=adventure_tim
If you'd like to help me out on my creative content journey you can buy me a coffee or hot chocolate for $3 here. Thanks so much for your support.
ko-fi.com/adventuretim

Пікірлер: 85

@AdamBoltGoldCoast Жыл бұрын

I'm glad I saw your video Tim. I noticed when you scrolled through the web page of some of the features of GoPro Labs that there were new features now available. One thing I'm super excited about is the new function available for GoPro 11/Mini, that you now have auto white balance lock. This is so handy for us scuba divers. No need for coloured filters now. Just get to your desired depth point your GoPro at the scene, let it recognise it, then hit record. The white balnce will now be locked, so no more colour shift with white balance as you move around your scene. It's like being able to set a manual white balance under water now 👍👍😱😱😎😎🤿🤿🐋🐋🐠🐠🦈🦈🐢🐢🐬🐬

@AdventureTimMedia Жыл бұрын

Hey Adam, That sounds like a great feature that will definitely help when you are underwater. I'd love to see some of your footage using the new settings, mate.

@AdamBoltGoldCoast Жыл бұрын

@@AdventureTimMedia Yeah I can't wait to try this feature out. Just looking now for a waterproof grey card/colour checker which I hope will also help with getting good colour/white balance using this feature. The GoPro does a pretty good job using no dive filter and using auto white balnce (like this clip I took at 20m depth with some cheap dive lights kzfaq.info/get/bejne/r51lh82qsLDdeWw.html ). Being able to lock the white balance while underwater is a bit of a game changer for those wanting consistent colour in your dive videos at certain depths.

@Morphaplasm Жыл бұрын

Thanks for this vid Tim, easy to follow and set up🙂

@AdventureTimMedia Жыл бұрын

Hey Morphplasm! Thanks for your comment! I'm glad you found my video helpful !

@philippecloarec 11 ай бұрын

Hi Tim. Thx for sharing your expertise. That tuto is pretty complete and will help most of us.😉

@AdventureTimMedia 10 ай бұрын

Hey Phillippe! Thankyou so much for taking the time to watch and comment on my video. Really glad you found it useful. All the best.

@GrabLifeByTheGourlays Жыл бұрын

Awesome stuff Tim! Will try it when I get home from work! 🤙🏽

@AdventureTimMedia Жыл бұрын

Hey mate. Glad you liked it. Let me know how you go. I'd be interested to hear how it works out for you. Cheers.

@sucofnisucofni8935 10 ай бұрын

Brilliant. Works a treat on my 10. Game changer, so quick. Easier that the camera menu. Thanks

@AdventureTimMedia 10 ай бұрын

Hey Sucofni ! thanks for yoir comments. So glad to hear you found it helpful ! All the best

@KineticAirRgV 2 ай бұрын

TY!!

@AdventureTimMedia 2 ай бұрын

You are most welcome, KineticAirRgV! I hope you found it helpful! all the best

@speedstatus9 10 ай бұрын

Hey great video. Didn't know this existed. Is there anything in GoPro Labs on audio like "Gain Level" adjustment? Or possibly "Stereo/Mono" options? I read in a GoPro community forum that there is, but I didn't see it in the video anywhere. What I do involves having the GoPro 11 close to my mouth when I talk and I'd like to lower gain level without having to rig an external mic or anything. Thanks.

@AdventureTimMedia 10 ай бұрын

Hey _m_d ! Thanks for your comments and so glad that you enjoyed discovering gopro labs in the video. I have done some digging and I think I may have found a solution for you. If you scoot down the link I've provided to 'Audio and media mod extensions' it does have a section where it mentions changing the gain. Basically you copy the code oMGAIN=required dB ( ie.oMGAIN = 5) , open the QR control app and paste it in as the QR command. Put that QR code in front of your gopro with gopro labs installed and the gain will be altered. NB: using the oM prefix will only apply for that power on session. To permanently add that gain level use the prefix !M (ie: !MGAIN =5). I haven't had a chance to try this yet myself , due to work commitments, but I think it might be able to help you. Let me know how it goes. All the best. gopro.github.io/labs/control/extensions/

@speedstatus9 10 ай бұрын

@AdventureTim1 Dude you are the best! Keep killing it! 🫡

@AdventureTimMedia 10 ай бұрын

Thankyou so much for your support, _m_d .I really appreciate it!

@gregoh8087 8 күн бұрын

Hi, I just want to add a date time stamp on every video that I take, I tried and not working, would you please do one QRCode so I can scan or do a video to show how? Thanks.

@AdventureTimMedia 4 күн бұрын

Hey Greg ! Thanks for your comment. More than happy to help you out with this one . I'll try to put up a short soon on this topic for u. Cheers

@CyclingInTheAlps 8 ай бұрын

Great video - I've just started using an 11 mini - can you still use the gopro app to control the camera after you have installed gopro labs?

@AdventureTimMedia 8 ай бұрын

Yes, absolutely! gopro labs just opens you up to a ton of new options ! Have fun with your new 11 mini. It will capture some great footage while you are cycling!

@ArmyJosh 3 ай бұрын

Hey TIm, great video man. I noticed in your video there was a little green bar at the bottom of your GoPro showing the sound level. How did you do that?

@AdventureTimMedia 3 ай бұрын

Hey ArmyJosh! Thanks for your comment. The green bar of lights is due to my GoPro being in the media mod. The lights appear as soon as you pop your camera into the housing. I think there is a GOPRO Labs option where you can add it to your camera too, but I am struggling to find one that works. When I do I will let you know. All the best.

@ArmyJosh 3 ай бұрын

Hey Tim, thanks so much for responding! I dont have the media mod but I have thought about getting it. Thanks so much

@AdventureTimMedia 3 ай бұрын

You are most welcome. Thanks for your questions and thanks for your service. all the best

@sgtrock3259 2 ай бұрын

Hey! Is there any way to burn in a timecode to GoPro video so you can see the date and time ticking away?

@AdventureTimMedia 2 ай бұрын

Hey SGT, Thanks for your comment! If you click on the link and input your time and date to create a new QR code, and then scan it with your GP you should be on your way. If you have any questions or you would like me to make a little video, please let me know. All the best. gopro.github.io/labs/control/overlays/

@PeterLinyov 8 ай бұрын

Hello. I'm trying to set Delayed Actions to shutdown and capture in & End capture after(8:00-17:00), create a QR, send HERO11B, everything is fine but...the camera turns on immediately...why? What am I doing wrong? I want to turn on the camera to film only the day at the construction site, without the night...

@AdventureTimMedia 8 ай бұрын

Hey Peter, thx for your message. Sorry to hear you are having some issues with GoPro Labs. I've been looking into this one and it's kinda got me a bit confused too. My camera turned off fine after scanning the QR code and then started recording fine but didn't stop when I programmed it too. hmmm. Have you tried using the QR control app? Let me know how you go. I'm still planning on digging into this one some more. If I find anything out I'll let you know. Cheers

@FOOTBALL_CPT 23 күн бұрын

I need some guidance please. I film after sunset 5v5 Football. The camera is set up on a pole and we play under floodlights. What settings should work to battle the low light for my hero 12?

@AdventureTimMedia 18 күн бұрын

Hey CPT, thanks for your comment. Great question btw. Normally when it gets dark I use a WB of 3200 or 4000 . As it's sunset I would probably start at 4000. I would leave the shutter on auto but I would adjust the EV comp to let in a bit more light, maybe increase by one two stops. Try it at +0.5 or +1.0. I would also make sure your iso is set to a Max of 800. any higher and it will look grainy . I hope this helps.

@FOOTBALL_CPT 18 күн бұрын

@@AdventureTimMedia thank you for the reply. Jip unfortunately I struggle with the grain. I've actually realised that the software I'm using on my phone also does compression on the footage.

@AdventureTimMedia 18 күн бұрын

Hey mate , if it's looking too grainy I would decrease the ISO. 400 is ok, but 800 would work best at sunset. Try having min and Max ISO at 800, the same. If you have min at 100 and Max at 800, the gopro will automatically choose the best ISO in between. Using this setting gives you more control over the shot. Compression is common on phones and cameras- ad otherwise files would be too big to be sent. You can zip files but you will lose some of the quality either way. I hope this helps

@FOOTBALL_CPT 18 күн бұрын

@@AdventureTimMedia thanks again. I will revisit Iso settings this week. Damn these cameras don't like low light. When we play it's very dark. The flood lights are powerful but the GoPro 12 still doesn't like it.

@AdventureTimMedia 17 күн бұрын

@FOOTBALL_CPT OK. Good luck, mate. Btw do you find if you film in the flood lights it looks washed out and then its grainy elsewhere?

@jamesyount2423 9 ай бұрын

Can I permanently save the settings I loaded on? I noticed my settings are gone if I power cycle my gopro. I want the USB to always trigger the camera

@AdventureTimMedia 3 ай бұрын

Hi James! Thanks for your comment. Awfully sorry I have taken so long to reply. The easiest way is to go to the QR Control app, swipe to the extras tab, use the drop down to find the Feature FourCC code for your option - which sounds like it might be WAKE from your description. Ensure the box next to the word 'Permanent' is ticked, hold your GoPro up to the QR code, and you should be good to go. Hope this helps. All the best.

@sten6537 9 ай бұрын

What actually happens if you select a preset? I really miss the respons from the website or app what settings are selected if you apply a preset.

@AdventureTimMedia 6 ай бұрын

Hey sten6537! Do you mean an existing preset, like one of the ones in Protunes section?

@fahmiramadhan3198 7 ай бұрын

How do I return it to normal, or return it to the default settings, or disable this GoPro Labs feature?

@AdventureTimMedia 3 ай бұрын

Hey fahmiramadhan! Sorry to taking so long to get back to you - I do apologize. Which one of the features to you wish to return to normal? The easiest way is using the QR control app - swiping to the Extras tab - and then using the Four digit code for the setting that you wish to remove - (ie.LEVL , which displays an onscreen spirit level on the screen) - and then inputing the data level that will remove the setting- usually zero. When you hold up your gopro, it will find the QR code and change the setting for you To remove all GoPro labs setting from you camera, on the Extras tab, select !RESET from the dropdown at the top of the page, hold up your camera to the QR code and all your labs settings will be gone. I hope this helps.

@fahmiramadhan3198 3 ай бұрын

@@AdventureTimMedia ohhh thankss man 😇👍

@sucofnisucofni8935 9 ай бұрын

Have you tried taking it off and reverting back to the original firmware ?

@AdventureTimMedia 6 ай бұрын

Hi mate, it is possible to fully remove it from your GoPro if you don't require it anymore. I have yet to do it myself but I found this video that you might find helpful. Cheers. kzfaq.info/get/bejne/ap1zi6WSt6zDpmg.html

@sucofnisucofni8935 6 ай бұрын

@@AdventureTimMedia I did finally succeed . After about 15 attempts. Unsure what or if I was doing wrong.

@AdventureTimMedia 5 ай бұрын

@@sucofnisucofni8935 all good mate. Well done. I'm glad you got there in the end. Just wondering why you wanted to get rid of gopro labs ? Cheers

@sucofnisucofni8935 5 ай бұрын

@@AdventureTimMedia wanted it back to original in order to sell

@CycleMan2200 5 ай бұрын

I have a 12, and I selected 2.7K, 30 Narrow and 2.7K 24, Wide, and it does not show up on the camera. Why is this?

@AdventureTimMedia 5 ай бұрын

Hey CycleMan2200! Thanks for your comment! If you are using 16:9 the only 2.7K option is 240fps and the hero 12 no longer has the Narrow lens. The last model to have that lens was the Hero 10. The lowest or smallest lens option is now Linear with Horizon levelling which is still pretty versatile. If you do want 2.7K you have to change your aspect ratio to 4:3 where you have 60 or 120fps and three lens options - including wide. A better option - if you want 24fps would be to go with 8:7. The default lens is wide and your resolution options are 4k or 5.3K with 10-bit colour. This resolution and the 10-bit colour is really going to look far better than 2.7 K and you can crop your footage to 16:9 or 9:16 in post. I hope this helps. All the best.

@playercool003 4 ай бұрын

Not available for hero 12 ??

@AdventureTimMedia 4 ай бұрын

Hey playercool003! Gopro Labs is also available for the Hero 12 by following the same process I outline in the video. This was filmed in March 2023 using the Hero 11. Hope this helps and thanks for watching!

@playercool003 4 ай бұрын

@@AdventureTimMedia thnks!

@no15minutecities 8 ай бұрын

Why 60fps when you're in PAL land 50p????

@AdventureTimMedia 6 ай бұрын

Hey there, thanks for your comment! You are correct I do live in a land of PAL but I just find 60fps works just as well when I play back on my TV. Thanks for watching.

@jpfourie2020 Жыл бұрын

Will this void my warrantee?

@AdventureTimMedia Жыл бұрын

Hey JP. Thanks for your comments. Using GoPro Labs won't void your warranty as you are not changing anything on - or inside - your camera. Gopro actually has a whole selection of QR codes they have created on the website I mentioned in the video. I hope this helps .

@jpfourie2020 Жыл бұрын

@@AdventureTimMedia Thanks for the quick reply. How stable his the firmware

@AdventureTimMedia Жыл бұрын

Hey JP , I've had it on my camera for nearly a month now with no issues at all.

@jpfourie2020 11 ай бұрын

@@AdventureTimMedia I’m really great full for your time you spending to reply to this, thank you 🙏🏻 . If you don’t mind I have one more question. Do we keep all the stock presets after the firmware change. Or do we have to keep scanning the QR?

@caalinAbyan 4 күн бұрын

Gopro labs which problems is solving?

@AdventureTimMedia 3 күн бұрын

Hey Caalin! thanks for your comment. Gopro labs is a free download that you can put on your gopro that broadens the number of options you have when using your camera. It's gives the user access to a lot of features that are still in the testing phase and often end up on the next version of gopro. This multitude of options also solves a lot of problems users may have with their gopro. Check out the video and if you have any questions feel free to hit me up. all the best.

@caalinAbyan 3 күн бұрын

@@AdventureTimMedia after I updated my GoPro 11 after seconds it is turning off it self’ . Now no battery it says and I use with power bank. GoPro labs can solve or!

@danielionut4738 6 ай бұрын

After I installed gopro labs, the quality of the image dropped drastically, especially in the shadow areas! the settings are the same! Gopro goes from failure to failure!

@AdventureTimMedia 6 ай бұрын

Hey Copilul, thanks for your comment. Sorry to hear your bad experience with GoPro Labs. I haven't noticed any difference in image quality but I did notice the screen brightness decreased greatly after the installation. I just changed it by swiping down , swiping right, preferences, display. What gopro do you have ? I was using the Hero 11 in this video.

@nutrino75 4 ай бұрын

so if you dont have your phone or laptop with you, your screwed.

@AdventureTimMedia 4 ай бұрын

Hey nutrino75, Thanks for your comment. You can preload your GoPro Labs options before you leave home and they will be on your camera when you come to use it later in the day. I like using the QR Control app on my phone in case I need to make changes while I am out on a shoot. I hope this has helped. If you have any more questions, I am happy to help.

@nutrino75 4 ай бұрын

@@AdventureTimMedia thanks for the reply. As much i love the settings with GPL, i just dont understand why you can enable and disable the unique settings on the camera. Example, i set shutter speed 45 degrees with the code, that setting is hardwired on my camera now. If i need to change it, cause i like tinkering with different senarios, without an alternate code, and i dont have it on me, im screwed.

@AdventureTimMedia 3 ай бұрын

Hey Nutrini, you can reset your shutter speed by using the QR control app . You can also set the setting for permanent or only for use this time by ticking a box on the app. worst case scenario you can fully remove GPL from your gopro. Let me know if you need any further help.

@Argeniumus Жыл бұрын

Настройка камеры через qr-cod появилась в 20 году, а обзоры этой настройки делают спустя 3 года))

@AdventureTimMedia 10 ай бұрын

Hey Pavremerelentiumimus ! Thanks for watching! You are right! GoPro Labs started in 2020 but every year more and more features are added! Have you had fun using GoPro Labs?

@no15minutecities 8 ай бұрын

Seems quite tedious. Why not just add all the features into the camera??

@calvinatdrifterstudio8438 8 ай бұрын

These features are based on a system of commands and originally it would so you could program the camera to do something complex. For example record videos at certain intervols with certain settings. You can actually write a little script and print it in a qr code that you can keep with you in your camera bag. Want the GoPro to do a little pre programed time lapse? Just flash that qr code. The qr system was for handling complex settings and programs without having to use the touch screen menu at all. In the video above it looks tedious but it's because he is only using simple features. Think about it like this - the GoPro has a preset menu, and you can create extremely specific presets, but the GoPro is capable of hundreds of small adjustments. This could never be navigated reliably on the tiny screen so GoPro only shows the major stuff. If I want a specific video quality, a specific bitrate, custom picture profile outside of vivid/natural/flat, a specific min and max iso and shutter, ect, I can simply build one qr code and print it on a card. Simply flashing that in front of the overides everything in the gopro and guarantees it's going to do exactly what it's supposed to. It's really incredible when you think about it. It's a perfectly reliable accessibility feature with access to over 100 developer settings. No need to even use the tiny souch screen. Gloves? Underwater? No problem at all

@AdventureTimMedia 8 ай бұрын

Hey Calvin, thanks for your comment. The video was created with newbies in mind. Gopro Labs has lots of different options available- many of which you've listed above - but the intention was to show people what's available and how to put it on your gopro using the methods available. Cheers