@Oreointhemicrowave 5 күн бұрын
worked with a bit of problems because I haven't used a computer in a while, but fixed them with some help from the comments and some I just fixed by myself, thank you!
@user-fg2sj2qo7v Ай бұрын
just helpful tip. explain and expound on the commands youre using. good content brother
@ibhardwajrahul 5 күн бұрын
Subscribed 💖
@sweezek3719 6 күн бұрын
Great guide! Hrlped a lot!
@harshvardhan9585 Күн бұрын
Nice thanks
@TomWall-s7b Ай бұрын
Just a warning to anyone using a phone without a carrier. I have a Motorola Power G that I purchased unlocked and without a carrier, so I wasn't sure what factory image to download. I found an image for a carrier matching my exact factory image ID, and so went with that. Everything was successful, but after flashing, my device is now in a soft brick status. The device boots, but the screen is unresponsive to touch. I did a complete wipe and factory reset and that appeared to work but the device is still unresponsive to touch. Just a warning, may not want to try this unless your phone was actually purchased from a carrier.
@sakshamkatoch2559 Ай бұрын
just follow the steps properly and you will be there.. very helpful
@AkkiE. Ай бұрын
hey dude!! been following ur procedures and it works like charm.thanks for that... but heres a situation i am currently using moto g72 running android 13 it has google dialer ..but it only shows limited call logs of about 500 ..i want call logs like xiaomi which is practically unlimited..is there any module or modification?? kindly help sorting this out.
@richardcly3 8 күн бұрын
Does this work for Moto g 5g(2022)? My phone isnt the stylus version
@agarjakendu 5 күн бұрын
mine just restarts after "adb reboot fast boot." Literally stuck.
@faserstostun 5 күн бұрын
Two things for clarity: 1.) Procedure: If the phone is carrier unlocked already, we can skip to the "root" procedure. Correct? 2) Image identification: If the phone is originally a Tracfone and I'm using T-Mobile as a carrier, do we flash with a T-Mobile (current carrier) image or TracFone (original carrier). My assumption is current carrier. Thank you for this incredibly detailed guide!
@daviddavis8102 17 сағат бұрын
No. A carrier unlock is a totally different thing than a bootloader unlock.
@RobertD-kg7my Ай бұрын
you are the best yo rooted on android 14 n i was pretty sure the internet said you cant, not sure how but it woked 🤙💪😎
@chacaabbaylee768 2 ай бұрын
Unlocking and flashing the firmware to get root access are separate parts of the process and both require quite a bit of knowledge to achieve. You should def make a video about the different variables with unlocking a device. It's easy, but people spend tons of hours just to finally learn that their model isn't unlockable for whatever reason. The main one being that carriers don't want you to have access to the USB tethering feature
@cometosuccess1776 4 ай бұрын
(bootloader) Failed to get unlock data. 4:06 please can you solve this problem when i entered this command " fastboot oem get_unlock_data" it returned an error "failed to get unlock data"
@EvilMonkey7818 2 ай бұрын
You can't get past there if it's been less than 180 days since the phone was initially activated on MetroPCS. Maybe it's different for other carriers. I looked all over on xda developers and other places. In fact most of us had to manually put the phone in fastboot mode.
@sdmfbastard Ай бұрын
might need to update windows drivers. go to windows updates while your phone is plugged in and check optional updates
@SilverCat486 Күн бұрын
do adb reboot bootloader instead of adb reboot fastboot that worked for me.
@tamimali1506 3 ай бұрын
In my moto g52 4g device after bootloader unlock DRM info showing Widevine l1 support but prime video & Netflix playing in 480p
@jonpeck3113 10 күн бұрын
At fastboot OEM get_unlock_data keep getting FAILED (remote: 'Command not supported in default implementation') suggestions?
@user-ce6cs7xq4c 13 күн бұрын
i am not tech savvy but my phone is locked to Cricket and i was wondering if this would actually help unlock network so i can use it on other network?
@av3edits 2 ай бұрын
I know the carrier i am using but how to know this 5 letter code on moto g54 5g
@kazishohel11 12 күн бұрын
Hi, I need help to install patch boot image. I used the command that you provide to flash, but it's not flashing it's says preflash validation failed. Remote failure. Note: I did rename the path file name boot.img. please help me..
@mostafakhalil6201 16 күн бұрын
Why i need firmware and flashing my phone again with software since i had the latest software ? All i need is Root validity and an app to install it . Maybe need to install some recovery .
@the-scholars-den 27 күн бұрын
Really said good
@SsarunS-y9g 19 күн бұрын
i have factory reset moto g 5g (bootloop issue) can i recover data?
@vincentjrphiri7558 22 күн бұрын
Can it unlock a network locked to spectrum?
@Zero-ff6ky 2 ай бұрын
motorola site says cant be unlocked, is there a way around this?
@amirkhan-lv1lg 12 күн бұрын
thank u abe ☺ how to install xposed framework for moto G7 play XT1952-4 android 10 bro plz make a video
@Gage-dg3hy 2 ай бұрын
one hell of a lengthy process made a few oopsies, but i am rooted
@CHenry-q6r 26 күн бұрын
What if you don't have a computer?
@jacobwilson6296 2 ай бұрын
Can see all your numbers your white box was transparent a bit
@Maliciouscheese 27 күн бұрын
having the waiting for any device issue and cant find a fix..? help someone!!
@rosexd618 16 күн бұрын
check drivers
@andrei.armaniii 2 ай бұрын
Site is not working
@halking6932 25 күн бұрын
What firmware do you get if you never had a provider? I bought an unlocked phone.
@Mourning-Sun 22 күн бұрын
It SHOULD be RETUS (if in the us anyway) or another RET variant if you're somewhere else in the world. I just finished rooting my Stylus '24 with this method and using RETUS, I bought it new from Amazon during Prime Day. Good luck. 🤙
@ZeroStasis-bp8gh 2 ай бұрын
moto g power 5G (XT2311DL) oem is gray out, does waiting 7days work? If no how do I access this option
@IHATESCHOOLMAN0998 Ай бұрын
I read if you factory reset without the sim and make a rush for the oem unlock without signing into google and such you can unlock it.
@theenginerd5967 Ай бұрын
I had a Verizon SIM plugged in immediately(Phone is unlocked by Default). I don't know how long I waited, but the phone died somewhere over the course of the month after ejecting the sim, and the switch ungreyed. So, just try letting it sit without a sim for a bit?
@ZeroStasis-bp8gh Ай бұрын
After 14 days it was available to click oem toggle, but Motorola says not eligible, I'll wait a while and check again. While I wait I'll explore alternative methods.
@ZeroStasis-bp8gh Ай бұрын
OK, it's been little over a month, going to check the Motorola website again, if still no, I'll contact support and find out why, as well as explore alt methods / work arounds
@ZeroStasis-bp8gh Ай бұрын
OK, it's been little over a month, going to check the Motorola website again, if still no, I'll contact support and find out why, as well as explore alt methods / work arounds
@theenginerd5967 Ай бұрын
I'm able to run 'reboot fastboot' and the device(Moto G Power 5G 2024, Android 14) executes properly, but from the device I have to manually tell it to reboot to bootloader and from there neither the computer nor the device detects each other(Ran ADB devices to confirm). I've tried three separate USB-C cables(OEM cable, A data cable for an external NVME drive bay, and a USB-C to USB-A cable) and none of them detect. Kinda at a loss figuring out if there's another security switch preventing the connection. Any help is welcome!
@sdmfbastard Ай бұрын
yea I was doin all kinds of weird stuff for hours. Finally, I found that I had to update my windows driver for android usb. I went to windows update and clicked view optionial updates while my phone was plugged in ( it showed something like motorola android usb update). next I physically rebooted my phone in fastboot (restart, then hold the down arrow and the power button until the boot screen appears). At that point I again entered " ./fastboot oem get_unlcock_data" and it worked.
@Con-np9yx Ай бұрын
The commands onward are not "adb". They are "fastboot". Yes, I know its hard to see. I ran into this problem when I attempted rooting last year. Fastboot, not ADB.
@theenginerd5967 Ай бұрын
I made a post but it didn't show up; I was able to successfully root my device several weeks ago. Make sure that the machine you're running powershell/terminal from actually has the OEM drivers FOR YOUR PHONE. Otherwise, the computer won't see the device properly, and you wont be able to send commands to it.
@supera244 23 күн бұрын
Can you explain the root process in detail? Is it for the xt2415-1?
@theenginerd5967 22 күн бұрын
@@supera244 Everything the video details is relevant to getting any Moto phone rooted, just make sure your computer that you're running the adb commands from has the drivers for your phone locally installed. otherwise, it won't detect the phone while it's in the bootloader.
@vincentjrphiri7558 22 күн бұрын
I have the same phone but locked
@fawadahm82 Ай бұрын
hi abe , is there any way to remove Bootloader unlocked warning message on this devices ?? thank you
@rosexd618 16 күн бұрын
1. First, remove root access from your device. 2. Flash the device with the stock firmware. 3. Enter ADB mode and type the following command: `fastboot flashing relock`. ⚠️ **Warning:** Do not relock the bootloader before removing root access. Doing so may hard brick your device, with only a 2% chance of recovery. ⚠️
@fawadahm82 15 күн бұрын
@@rosexd618 thank you a lot..
@mohangawade6152 3 ай бұрын
How to find out carrier name
@Con-np9yx Ай бұрын
Well... What's your carrier? On most phones you can see it listed as "SIM Status" under "About Phone" in settings
@HannahWalker-zo5bs 22 күн бұрын
It would be Verizon, if I got my phone through Walmart right? @@Con-np9yx
@IHATESCHOOLMAN0998 Ай бұрын
Do the Pi Hole. I have an extra moto G power now
@stanleyrudzani1592 3 ай бұрын
when i entered this command "fastboot oem get_unlock_data" it give me an error so how to get this work plus my device after a bootloader it no longer display my phone if is connected or not if using same command ./adb devices
@sdmfbastard Ай бұрын
I had to update my windows driver for android usb. I went to windows update and clicked view optionial updates while my phone was plugged in ( it showed something like motorola android usb update). next I physically rebooted my phone in fastboot (restart, then hold the down arrow and the power button until the boot screen appears). At that point I again entered " ./fastboot oem get_unlcock_data" and it finally worked.
@blues_me_tender_real 2 ай бұрын
when with windows cuz it dosent work
@Con-np9yx Ай бұрын
It does work, I'm doing it right now. What problem are you having?
@NITINMODS 3 ай бұрын
How can i contact you
@user-ks2ly6pb2q 4 ай бұрын
HOW TO UNLOCK BOOTLOADER DEVICE MOTO EDEG PLUS 2022 US I NEED TO KEY
@abeatech 4 ай бұрын
if you already have you phone and computer setup - you can start at 3m30s of this video, otherwise start from the beginning. Some US carriers prevent bootloader unlock, in that case try the tips shown at 2:02 kzfaq.info/get/bejne/npmDadaesqqqkp8.html&lc=Ugw0VRl-fNtTwzPhzeh4AaABAg&t=3m33s
@user-ce6cs7xq4c 19 күн бұрын
i am not tech savvy but my phone is locked to Cricket and i was wondering if this would actually help unlock network so i can use it on other network?
MovilAndroide
Рет қаралды 66 М.
Marvel Techz
Рет қаралды 11 М.
N Unlocker
Рет қаралды 69 М.
Explaining Android
Рет қаралды 16 М.
GSM Phone Repair
Рет қаралды 45 М.
Technical Krrish
Рет қаралды 101 М.