How To Deep Clean A Dyson V11, Outsize, or V15 Vacuum

No video

How To Deep Clean A Dyson V11, Outsize, or V15 Vacuum

Рет қаралды 171,832

Күн бұрын

If you have been using your Dyson V11, V15, or Outsize vacuum for a few months, it's probably in need of a deep clean. Don't worry, it's not a hard process, but it does take about 30 minutes to do properly! Here is how to clean your Dyson cordless vac and make it look way better and work like new!
Replacement Filter For Your Dyson: amzn.to/38ekvTf
How To Empty a Dyson V11 or Outsize Bin: • How to Empty the Bin o...
Join this channel to get access to perks:
/ @unsharpen
#dyson #cleaning #vacuum
Want more videos like this? Please subscribe! / @unsharpen
note: amazon links are affiliate links and I get commissions for purchases made through them. Any other affiliations or agreements will be noted in this space, if they exist.

Пікірлер: 64

@Xanduur 2 жыл бұрын

If you clean ALL the dust off the rubber gaskets, the bin will be hard to open and close. It actually uses the dust as a dry lubricant. After the gaskets are FULLY dry rub a small amount of talcum powder on the gaskets and you’re set.

@laurenhardaway5942 Жыл бұрын

This comment just saved my life lol! Thank you!! I’ve been trying to figure out what the problem is for two days!

@fzihana954 4 ай бұрын

Thank u so much for this tip!!!!

@joannagarcia2001 4 ай бұрын

Whoops. Wish I read this before I cleaned so well 🤣

@DustSprite 2 жыл бұрын

It’s easier to initially clean out the High Torque head with a small paint brush. Then after removing the beater, push a moist microfiber cloth behind the remaining roller with a chopstick or other blunt tool. Be patient. The gunk on the clear plastic comes off after a few rubs.

@rudyfan1926 6 ай бұрын

Thank you for this informative and helpful video. I have a V10 and this aided me so much in cleaning it and now it is back to running like a champ.

@unsharpen 6 ай бұрын

Great to hear!

@eleanawoods4510 Жыл бұрын

This is the BEST dyson cleaning video! Thank you so much. :)

@kristinstockholm1008 2 жыл бұрын

Thank you SO much for this video. Extremely helpful! I’m amazed that with the great help, I was able to completely clean my Dyson V11 - the before and after is remarkable.

@unsharpen 2 жыл бұрын

Great to hear!

@cherylalexander970 2 жыл бұрын

I was determined to get the plastic shield looking clean. A damp rag did not do the job. So, I used a Mr. Clean scrub sponge. It did a great job on the the shied.

@nena8046 2 жыл бұрын

Wow thanks! I did it and it worked great!

@yvette2039 Жыл бұрын

Thanks! I will try that! I absolutely hate the look of the plastic when its gunked up!

@sixty2612 6 күн бұрын

I was able to get the clear plastic on the head pretty clean by taking a straw-cleaning brush and bending it around the motor

@unsharpen 5 күн бұрын

Great tip!

@gcruishank9663 2 жыл бұрын

The problem is that that inside of the motor unit builds up with dust and debris. Either the older Dyson’s like the DC25 you could run water through the entire assembly. A long bottle brush kind of works.

@janicesieg9526 2 жыл бұрын

Thank you for this video! Your instructions were easy to follow and I now have a very clean Dyson V11

@keithjones203 3 ай бұрын

You need to make clear that cleaning the bin and seals may cause the bin opening mechanism to stick (you may have lucked out and did not have to do this but many people have been frustrated by this issue). As others in this thread have pointed out and other videos address, you need to rub talcum powder or corn starch on the bin seals after cleaning, otherwise the the soft silicone rubber will stick to the internal parts they are int contact with. The dust acts as a lubricant to allow the seals to slide across the internal parts.

@noraidavis2454 9 ай бұрын

Thank you, great instructional video.

@vartig12 2 жыл бұрын

Thank you, that's a realistic demonstration!!🙏

@jeffreyvanwelt7549 Жыл бұрын

Life saver bro! Big thanks❤

@reidjulin1439 Ай бұрын

I actually use my leaf blower to blow out all of the built up dust. You’d be amazed at what comes out

@unsharpen Ай бұрын

Ha clever. It doesn’t damage the pleating I guess?

@lashellemarlow Жыл бұрын

Thank you perfect description and step by step how to efficiently!

@unsharpen Жыл бұрын

Thanks!

@socorronunez5869 Ай бұрын

Great Video, thank you so much.

@unsharpen Ай бұрын

Glad it was helpful!

@lindat9628 5 ай бұрын

Very good video on deep cleaning. My problem is the roller bar will not spin and appears to be locked into position. The roller itself does not turn even when manually trying to turn it. Once the end piece is in Unlock position, the bar will not move out of the casing head. I'm afraid to get too aggressive in trying to remove the roller bar. Everything is cleaned out from the roller bar, including the ends. The main motor works fine with all the other attachments and all electronic connections are clean. I'm at a loss other than buying a used replacement. Any suggestions in trying to remove the roller bar?

@windblaze8 5 ай бұрын

The brush section of mine doesn’t come out, just the plastic face on the side comes off (without the brush moving) - any tips on how to troubleshoot?

@myrnacardenas4955 Жыл бұрын

Thank you of making it so easy!

@veronicapena7094 Ай бұрын

The red seal and a ring came loose and I don’t know where or how or goes! Can you help?!

@cathydavis210 Жыл бұрын

Thank you for sharing! Just what I needed to know.

@rioclemens 4 ай бұрын

I want to know how to get ALL THE DAMN DUST out of the inside where you can’t clean. If I knock it on the side of the sink, TONS OF DUST DROPS OUT, but there’s no way to clean it?!

@Roma-lw2rh 2 жыл бұрын

Great video , easy to follow.

@dianagtz1294 2 жыл бұрын

So I cleaned the bin and it went ok but when I put it back in I don’t know how but it got stuck. Now I can’t open the bin anymore. Please help

@michaelbohmer362 Жыл бұрын

Brilliant thank you

@MBAngel 12 күн бұрын

Can I use soap and water to clean the extension wand?

@unsharpen 12 күн бұрын

I’d say no. There are electric components to it and if it’s not totally dry when you run the vac next it will ruin the motor

@MBAngel 12 күн бұрын

@@unsharpen okay! Thanks for replying!

@austinbeyak2422 2 жыл бұрын

big thank you for this video.

@unsharpen 2 жыл бұрын

Thanks for watching

@faisalabdullah2418 11 ай бұрын

Will washing the whole head damage it ?

@Moon888-oy8bb 2 ай бұрын

why not wash the plastic canister in warm soapy water?

@WhiteManInAVan Жыл бұрын

More like instructions for standard clean rather then a deep clean. Looking for a video to show how to clean the metal filter and cyclone tunnels.

@funkeokeniyi6556 Жыл бұрын

Thank you

@unsharpen Жыл бұрын

You're welcome!

@robinglasgow7693 Жыл бұрын

My outsize doesn't have an end with the slot to twist open. There's a red tab on one end & the cap comes off but I can't see how to remove the roller. HELP!

@vivianebajjani Жыл бұрын

I just did it . When you take the cap off just pull the roller out .

@ginettemorley5875 2 жыл бұрын

Can you use water to wash the high torque beater head, or can you just pick out hairs and debris?

@unsharpen 2 жыл бұрын

Just pick the stuff out. Unfortunately

@calandjens.1125 2 жыл бұрын

have 2 outsize and torque (multi purchases of v6,v10,v11) ...love my outsize but roller stopped spinning. It starts to spin and stops a second later and motor unit makes a different sound. Sometimes it works and sometimes it doesn't. No clogs/hair in wand, roller, and clean filter. watched your video on v6 but canister is different. Any suggestions? Also the one of the rollers on v11 outsize won't work at all even plugged into other motor units. Any suggestions?

@unsharpen 2 жыл бұрын

Look for a clog in the tunnel leading to the filter. I just pulled a ton of rug fiber out of mine. I didn’t even know this was an area that could clog as it’s a very smooth channel with no sharp bends. The pulsing is a dead giveaway it’s a clog

@victoriadragun3724 2 жыл бұрын

Can you use soap on the filter or just cold water?

@unsharpen 2 жыл бұрын

Just cold water will be fine

@lachlannicholls827 7 ай бұрын

So my wife soaked the whole head in water for 24hrs. safe to say the electronics are dead forever? :'D

@unsharpen 7 ай бұрын

That would be my guess but honestly I’d put it in a bucket w 5 lb of rice for a week and see what happened before throwing it out.

@coozbayt1021 Жыл бұрын

A can of compressed air adds to process

@michelefiorentin 2 жыл бұрын

i submerged in water for one night.... not a smart idea ! let's see

@TheDriver21122001 6 ай бұрын

Just use shop air outside......

@threepwood56 2 жыл бұрын

WHAT ABOUT CLEANING WHERE THE MOTOR IS? Hardly a deep clean if you leave all that dust and dirt in there.

@unsharpen 2 жыл бұрын

I’d highly recommend not taking apart the motor unit.

@gcruishank9663 2 жыл бұрын

That’s the problem with these cordless units, cleaning out the motor head. Why they didn’t make the plastic side so it could come apart easily so you could flush with water is bad design in my opinion. There are screws to take it apart but it’s a real pain so not really a solution. I think a long thin bottle brush or a thin air compressor rod might be the only viable solutions.

@cooljool1 Жыл бұрын

yes these cordless units are poorly designed@@gcruishank9663