Unveiling all the NEW Harbor Freight Tools At SEMA 2023!

Рет қаралды 548,488

Күн бұрын

PLEASE SUBSCRIBE AND CHECK OUT👇🏽👇🏽👇🏽
WORKFORIT APPAREL: www.workforitapparel.com
HYPERLITE UFO LED HIGH BAY LIGHTS:
amzn.to/3593tEv
HYPERLITE 200watt LED FLOOD LIGHT
amzn.to/2SikJVb
iYing 10.1" Head Unit:
amzn.to/3c5CfD4
FENIEX CANNON LED HIDEAWAY STROBE LIGHTS: amzn.to/38bCfOP
FENIEX T3 GRILLE LIGHTS: amzn.to/37ZXDpM
GET MY SUNGLASSES HERE: amzn.to/2SnnS0s
LED RECESSED LIGHTS: amzn.to/3a4boqc
THE BEST MILWAUKEE LED HEADLAMP: amzn.to/2KmuywY
CONVERT YOUR CIGARETTE LIGHTER TO USB: amzn.to/2IH460l
VLOG CAMERA: amzn.to/2CZfPll
GOPRO HERO 7: amzn.to/2VCZaLO
BULLET ANTENNA: amzn.to/2SK1Oxt
5" EXHAUST: amzn.to/2SLBR0u
MICROPHONE: amzn.to/2VFYtB7
JOYING HEADUNIT: amzn.to/2s8WmbD
CONTACT INFO:
Instagram:
dmaxryno?h...
Email:
Dmaxryno@hotmail.com
Join this channel to get access to perks:
/ @dmaxryno

Пікірлер: 828

@auntmaryspals7978 6 ай бұрын

I am a 67 year young woman who started woodworking a couple years ago and buy lots of things at HF. If I were going to be living where I have my shop for many years, I would certainly buy the purple tool chests. Unfortunately, senior housing doesn't usually allow people to bring their shops. 😄😄

@AZTrucker 6 ай бұрын

Harbor Freight is gonna have to expand the size of their stores a little bit. They keep advancing more and more and impressing me.

@shelltoe_soul 6 ай бұрын

Naw they will just keep getting rid of the lowest quality products like they have been doing.

@ricktallent8748 5 ай бұрын

The store on Walnut Ave in Dalton, GA is in what used to be a regional department store---half of the building is warehouse space or unused. The last time I was in the store, they had PLENTY of room to enlarge the merchandise they carry in stock. I call Harbor Freight "Toys-R-Us for Adults!"

@garrettgiuffre7298 3 ай бұрын

Thank God. I don't know why the Craftsman, kobalt and husky all have a space between the top and bottom cabinets drives me nuts

@maxracingteam23 6 ай бұрын

Harbor freight has really stepped up their game! I purchased a medium sized roller tool box this summer. Perfect for what I do

@Carlos.Rivera 6 ай бұрын

What do you do?

@lavishlex 6 ай бұрын

And they are always offering savings!!

@maxracingteam23 6 ай бұрын

@@lavishlex big time! I think I had a 30% off coupon for the tool box I purchased. It was a no brainer!

@user-kh2yl6nn3l 6 ай бұрын

And built as good or better than everyone else's tool storage out there .

@user-kh2yl6nn3l 6 ай бұрын

Does it matter ?...They are built as beefy as the tool truck boxes ... And actually better in most cases . :)@@Carlos.Rivera

@jesseroberts5681 6 ай бұрын

I knocked Harbor Freight for years. They have really stepped their game up recently. Their products are well made and affordable.

@AmericaFirst069 5 ай бұрын

I own one of the original Harbor freight trailer. The 4 X 8 that was built back in 1987. I still have it and use it. This was back when Harbor freight was just a mail order, company.

@alcerz984 3 ай бұрын

Well it was bad back in the day but not no more

@JohnDoe-xo7gg 2 ай бұрын

I swear they’re the craftsman replacement. Sadly not a lot made in the USA but the price point and warranty are great

@DavidPerez-nk4gc 5 ай бұрын

love that they’re all passionate about their new products. Great job with this unveil!🤙🏽

@wilahinely 6 ай бұрын

Harbor Freight straight up set up a new store in SEMA.

@nickjackson4683 6 ай бұрын

Harbor freight really is impressive nowadays. I'm a full time mechanic and I've been using that 6 drawer service cart for almost 2 years, about to pull the trigger on a 56" Series 3 w a hutch! Glad to see more and more good things coming from HF!

@krisparrish6153 6 ай бұрын

I just got a series 3, I love it.

@connor3288 6 ай бұрын

My coworker just got a new snap on box, maybe 72ish in, for $8000, making payments. How stupid. And was supposedly originally 16k. He got some money off due to cosmetic damage. Same us general box is probably less than 1/4 the price. Snap on box cost more than his car! 🙈

@nickjackson4683 6 ай бұрын

@@connor3288 Ive got a coworker who makes $14 an hour as a lube tech, and he owes $150 a week to the matco guy for a Matco 4s box. I cant imagine half of my paycheck going to the tool truck.

@slynn5138 5 ай бұрын

They’re definitely not the same.

@damnitdang 3 ай бұрын

I'm looking at the series 3 56" also. I believe it's like $900 now. I hope it'll drop a bit in the holidays lol

@voskamp7022 6 ай бұрын

Its nice to see that harbor freight is moving towards the heavy duty side as well. Especially with the reIease of their 3/4 drive torque wrench and their U-jount puller in the Icon line. Personally, I would really like to see a heavy duty yoke puller in the Icon line sometime soon.

@robinmerica7797 6 ай бұрын

I bought a ujoint puller two weeks before they dropped it, in person it feels just as good as my otc. I’m hoping for a brake anchor pin press and yoke puller aswell

@1STGeneral 6 ай бұрын

Hopefully the younger workers manufacturing these larger tools will lift with their knees 😮

@williambrady7135 6 ай бұрын

I remember 25 years ago when HF would come to town twice a year. They have become the go to tool store for me and have done so just in time when other places like Sears are gone. The products and tool box options are impressive.

@Ron-0417 6 ай бұрын

Great video guys. Here is some things that Harbor Freight needs to come out with or improve. Hopefully the right Harbor Freight people read this and do something about it. 6" long reach Torx sockets. They have them in Allen, but not torx. I had to buy another brand, because I needed them. I bought the Hercules 3/8 12v ratchet, and wish it had more torque. I have the old Earthquake one, and it seems to have more torque than the Hercules. I wish I hadn't spent the money on this one. I use the Flexzilla hybrid air hose and love them. I bought 2 Merlin hose reels, and the black rubber hoses that came in them were garbage. They were sticky and turned my hands black from using them, right from brand new. I then bought the Merlin hybrid hoses to put on the reels, and they are better, but do not come close to the flexibility of a flexzilla hose. Make single wrenches and sockets available for purchase. People do loose stuff, and you shouldn't have to buy another complete set. This would help in the case of some sets that skip sizes. If they don't have the shelf space, make it so they can be ordered into their local store. Does Harbor Freight have a place for customers to send comments and ideas, where they will actually be read?

@joshdane5657 6 ай бұрын

Yes they need single sockets and wrenches for sure. It would make it easier on them too for warranty purposes instead of them getting one out of a new set.

@joshdane5657 6 ай бұрын

And the skip sizes. Id fill my skips in if they offered them sooner but instead I filled them in with tekton or similar brands

@paulmysliborski4832 6 ай бұрын

I love how HF actually listens to their customers. That said..... Could they PLEASE, PLEASE, PLEASE offer individual ICON wrenches and sockets?? Buying a wrench set is nice, but if the biggest one in the set is 1-inch, and you would like to have 1-1/16" , 1-1/8"..... etc. Then you are pretty much out of luck. Great video!! 👍

@midtennturney 6 ай бұрын

Have to agree on this one. I would love to see the individuals in the bigger sizes or the skip sizes. Really needed them this past weekend, needed a 30mm wrench and socket. Checked with harbor freight first and unfortunately was unable to get either without buying a whole set of large wrenches or sockets

@CrawlSD 6 ай бұрын

Can the air brushes be connected to the larger 20+ gallon Fortress compressors?

@Ken-wv2wg 6 ай бұрын

@@CrawlSD yes, but you would have to use a air pressure regulator. The kind of regulator that has the gauge on it so you could dial/adjust the psi down to the specs. The psi specs will be in the papers that come with the air brush

@garrisong 6 ай бұрын

That’s my one complaint sometimes I just want to buy a single wrench or socket if I’ve lost something. I realize theft would be a problem with individual wrenches and sockets but other retailers seem to be fine selling individuals.

@Estranged180 6 ай бұрын

What they need to do is mass produce (more than usual) 10mm sockets, in both impact and non-impact variants. Mechanics everywhere will buy them out.

@Cabbagepatch66 6 ай бұрын

We need the off-road jack in that purple flake! 😂

@phoenixlawnokc285 6 ай бұрын

Love harbor freight, can not beat the quality for their prices I’ve slowly been switching everything over. Excited for that tri fuel generator to come out

@GRMobileWash 6 ай бұрын

Love these type of vids! Those guys at HF were all so great and normal.

@cobrapond 6 ай бұрын

I just wish Harbor Freight made it easier to get individual replacement sockets if you lose one. It's the main reason I don't buy their socket sets.

@joeclement3680 6 ай бұрын

Ryan should get an HF sponsorship for all the advertising and great feedback on HF products!!! Now, I jus bought the new welding table and I believe it's gonna workout really great for my "Tinker'n Around Fab Shop"! I've got a question bout the new welding tables. Are y'all gonna come up with some kind of couplings/connectors to join the welding tables into a modular style system??? Ryan, I preciate all of the videos y'all make! An keep on "ROCK'N THE OBS FOREVER "! I've owned my '97 Ford F-350 7.3 P.S.D.,5-SPEED,4x4,CC,LB since new February of '98!!! Thanks very much, Joe C.

@Cujo71321 6 ай бұрын

I am very impressed with the Hercules line. Having said that, I have everything that Bauer makes, corded and cordless. I have over 20 Bauer batteries and two Bauer double-chargers. I can't imagine the expense of trying to upgrade to the Hercules line bit by bit unless I could use my Bauer batteries with the Hercules tools. Harbor Freight needs to make converters to use the Hercules line of batteries on the Bauer tools, and vice-versa. I love the new 8-amp Bauer batteries and have 6 of them. I am sure they would perform very well with the Hercules tools if the right converter was made. So, for now, I can only admire the Hercules line from a distance and wish that there were a way I could afford to slowly make the change-over.

@DB-yj3qc 6 ай бұрын

I've been impressed with the Bauer line of cordless tools so far too. The 3/8 Bauer impact I've got actually outperformed a top name brand 1/2 cordless impact. The next time I was at H.F. I bought the 1/2 drive one.

@brianwester5385 6 ай бұрын

The bauer, Hercules, & dewalt batteries are basically the same footprint & couple mods will work with each other, or Amazon sells premade adapters

@iamnotafraid 4 ай бұрын

I am in the same boat, I have pretty much everything Bauer. When I first got into it, I didn't really know the differences between the three brands, I just heard Bauer was good so I bought that. Now that I know what I know, if I could go back I probably would've got the entire Hercules line. But for now I'll stick with Bauer, because like you said, it would cost way too much to replace everything. I've never had any issues with my Bauer tools and they've been able to handle everything I've thrown at them, but Hercules is definitely slightly higher quality and has higher specs on most tools. The biggest thing for me though is the fact that you can get way larger batteries for the cordless Hercules tools. At least Bauer has the 8Ah batteries now, I already picked up a few of those.

@jimderrick846 6 ай бұрын

Harbor freight has totally come a long way in the last 20 years. It is great 👍 🎉🎉

@COPPIPERGaming 6 ай бұрын

This stuff is so much more affordable and the quality has improved so much. I am gonna head over to the website and see what they have for a dew things I have been needing.

@ryandoyle825 6 ай бұрын

I got a green tool cart, a couple months later, they came out with the grey. I was so mad at myself because I wanted the grey. Now they’re coming out with purple and I gotta come up with an excuse to get it. I saw the purple Jack in store the other day, it is beautiful and another thing on my list to get.

@MisteryMan2000 6 ай бұрын

I'm with you - that purple metal flake jack is a must have.

@marcstruglia5910 6 ай бұрын

@@MisteryMan2000 That new Jack and Purple Tool cart is SIK!

@bravo_the_broken4003 6 ай бұрын

Harbor fright is sending fire down range! I love that they're always innovating and making things more affordable for us common folk lol.

@JCBRMR 6 ай бұрын

Great meeting you yesterday at BagelMania DMAXRYNO!Thanks for being cool enough to take a pic and chat, can’t wait to check out the Harbor Freight booth and the rest of the show! Keep up the great content man!

@purplebooger6410 6 ай бұрын

Just bought the portable bandsaw and standup/chop saw combo, 10 out of 10 can recommend! I didn’t realize how much faster it is to use the stand up bandsaw and a straightener cut than a cut off wheel until now. I do exactly like you said and leave the corded bandsaw in the chop saw stand up on the workbench and use it for everything now. Love it.

@chadhowell1328 6 ай бұрын

Something I wanted once I saw it for that exact reason.

@jameschristensen662 6 ай бұрын

Icon is really hunting for snap on and I'm all for it. Keep the prices reasonable and I think they're going to sell very well.

@danielpomeroy 6 ай бұрын

Quinn is pretty good too

@jasonstorie8740 6 ай бұрын

Knipex as well but are the tolerances going to be as tight and the steel as good. I'm an appliance service tech and i've had the same pair of knipex cobras for over a decade and can still hook onto a pipe like I could when they were new the teeth have not rounded off

@jasonstorie8740 6 ай бұрын

And the anti-cam tip on the screwdriver is copied from Wera, again is the steel going to hold up if so that's great

@fishboy3179 6 ай бұрын

The Blu and black handle 1.99 Philips screwdriver from HF is as good as my snap ons. I'm anxious to try those serrated needlnose slip joints I have the snap.on ones and.i like thm but the are useless in any twisting motion, the tips separate immediately

@glbennett66 6 ай бұрын

The biggest gripe I have about Harbor Freight is store layout and organization. When you're either looking at a certain line of tools or a category of tools, it seems they're just randomly placed throughout the store and it's like a treasure hunt. Even the employees have a hard time finding them sometimes.

@SgtJoeSmith 5 ай бұрын

i agree with that. like their bauer battery tools and battery packs are in 5 or 6 locations instead all in same place. maybe they hope you will see and buy more while hunting. thats why walmart puts the milk in the back and started moving pharmacy to the back.

@huf67 5 ай бұрын

That keeps you moving thru out the store and hopefully pick up something that you ran across while looking for what you actually came in for.

@AmericaFirst069 5 ай бұрын

Exactly I have been dealing with that same issue for years.

@LemonySnicket-EUC 4 ай бұрын

Their focus is boosting impulse sales not making finding what you came for easy.

@colorado1975 4 ай бұрын

Agree in that I can rairly find what I'm looking for. Any chance of doing like Lowes and Home Depot, in you download thier app to your cell phone then do a search of what your looking for and it comes back with what row and bay you can find your item at.

@BDJ4mTex 5 ай бұрын

Harbor Freight has been very impressive to me. Im a diy home and auto type customer but theu always seem to have what I need. Their US General tool boxes are very solid for the price.

@marklengal9990 6 ай бұрын

I love to Icon and Daytona line. I completed my wall tool box with icon including the large storage cabinets on each side. My first air tool was the Chicago Neumatic 1/2 impact bought in 1986. I still use it every day.

@downhomeonthefarm6464 6 ай бұрын

HF needs to add on more shop machinery. Such as the floor model drum sanders, planer/joiners, molders. Give Grizzly and Northern Tools a run for their money.

@MisteryMan2000 6 ай бұрын

I'm sold on the trailer, I'll be picking it up (along with both accessory kits) as soon as it's all released. This is a minor thing, but I wish the basic kit included a tongue jack, just so I don't have to wait weeks or months for the correct jack to be available at my local HF stores. Excellent coverage - Thanks!!

@lParohlx 6 ай бұрын

That’s seems silly you can get a nice much stronger 3500lb capacity trailer for a few hundred more and it’s actually welded together with a full width ramp gate

@maxswaxsportscards 6 ай бұрын

Trailer seems like a pos a build your own trailer that doesn’t come with deck material 😂

@DB-yj3qc 6 ай бұрын

It looks like a good light duty trailer, and it's late to the game for me. Now, on "Why would someone" get that vs 3500 heavier duty trailer. If you are towing it often but not needing that capacity, one wasting money on fuel for one. Second is tires wear and cost of replacing them. My heavy-duty trailer in 1.5 years of use, I've worn out the tires a good bit of the wear is due to not being loaded heavy enough for the tires to get even wearing. I don't even want to think about the extra fuel expenses. A 1200-2000 lbs capacity trailer has less drag, especially if it's only loaded to half capacity. Just towing my heavy-duty trailer is a 4-6 mpg hit, and I've been towing it over 30000 miles in last year.

@MisteryMan2000 6 ай бұрын

@@DB-yj3qc Exactly! I've been using my old "piece of junk" Harbor Freight trailer for more than 20 years now and it has worked great for me, but it's finally done all it can do and needs to be replaced. BTW I paid $495 for it when I bought it, and other than regular maintenance, I've had to do very little work on it. That's why I just laugh at people that say HF trailers are a "piece of junk"! Why spend more money when a quality light-duty trailer is all I need?

@johntalbert8227 6 ай бұрын

@@lParohlx I would not want a full width ramp. Big sail out back.

@EliJ87 6 ай бұрын

I love harbor freight I spend hours in there stores checking everything out, I use the Bauer power tools for all the jobs I do around my house and so far have had no issues with them

@carlvitko1355 6 ай бұрын

Same here I have a few of the Bauer cordless and love them for around the house

@tomm3338 6 ай бұрын

I like the pliers line up. I have a couple and impressed so far on the overall quality, also the handles feel great. The socket sets in the case with foam inserts looks like a winner to me. I’d like to see those come out in 1/2” drive as well

@justinleonard4411 6 ай бұрын

I can't find those sets even mentioned online

@P46345 6 ай бұрын

Back in the early 2000's Harbor Freight sold a slide top cart, I'd like to see one of those. Also a locking flex head ratchet.

@98ChevyK1500Z71 6 ай бұрын

On the ratchets...I'm the opposite. I buy their flex head ratchets because they are one of very few readily available mfgs that make non-locking. (Tool truck brands excluded) Seems like everyone makes locking or at least ones with detent stopping points for the flex head.

@advancedleveldiagnostics 6 ай бұрын

Thanks for sharing, Looks like great new tools are coming! I love how the pliers guy was trying to explain the handles without saying that they were just copying snap on 🤣🤣

@user-bz1nt9yt3u 6 ай бұрын

next step is to have some harbor freight tool trucks. thatd be a freaking killer. love how harbor freight really listens and goes above and beyond to customers request. Thanks for this amazing video.

@animademachina2747 6 ай бұрын

Really liking this new stuff, that welding table is super impressive I don’t have a large area to work in so I love the size of it, and always like seeing new spray guns

@vinnyivanov2906 6 ай бұрын

Wow harbor freight is really stepping up their game. Been using their cart in a professional environment and had no issues for 10 years

@teresaallen3045 6 ай бұрын

Love see paper catalog back out

@zachbaker9310 6 ай бұрын

Those icon wrenches and pliers look awesome. Can't wait for those to drop. Especially those vamplier dual grip knockoffs.

@edgarventura8744 6 ай бұрын

Anybody else waiting for a harbor freight tools truck to start coming by your work once a week 😂 ? I am !!

@cbmech2563 6 ай бұрын

Nope

@srmofoable 5 ай бұрын

It's crazy to see how far they have come with making decent quality tools in the past 20 years. They really stepped up to fill that void created by the fall of craftsman and then some. I like seeing them creeping into those niche market tooling even though I'm no longer in the business.

@mambaforlife8245 6 ай бұрын

It's always a good day when ryno post a video 🇺🇸

@ozyg67 6 ай бұрын

Those new pliers are going to change the game, unfortunately I already purchased the snap on slip joint long nose pliers but it’s nice to see they are releasing similar ones for an affordable price!

@R0GUEC0BRA 6 ай бұрын

Same here but I am going to buy a pair to keep in my to go bag and keep the snap on at home

@RJIVHALO 6 ай бұрын

Just bought the snap on ones a couple weeks ago lol. Oh well. Might pick up a set of icon ones for home

@ws4835 6 ай бұрын

I got both sizes of the snap ons and will still get these with a coupon if I can. Not even professional but I would love to have these in the car for use on the go.

@jasonstorie8740 6 ай бұрын

I'm sure the quality of the steel and tolerances aren't going to be as good and tight as snap on and knipex but for people that can't afford those brands it's a good compromise

@fishboy3179 6 ай бұрын

@@jasonstorie8740I'm gonna find out

@rybfish76 6 ай бұрын

Just commenting to boost this video and say Harbor Freight is hella sick.

@madcapsportsgarage9761 6 ай бұрын

I love the Harbor Freight step up, but I would like to see one Battery type for all of their cordless tools.

@rjedro 6 ай бұрын

I guess one battery type is too much to ask. Must be where all the profit is.

@cbmech2563 6 ай бұрын

Big difference in the warranty between Bauer and Hercules batteries. It would be nice if they made adapters for Hercules battery to Bauer tools

@casey360360 5 ай бұрын

The Hercules batteries make Bauer look like 20 year old ni-cad. The brushless motors in Hercules tools are night and day better too.

@mattbenson2497 6 ай бұрын

Man, I have used harbor freight tools for years, but now they are getting some really cool tools, which makes me want to buy all new ones. Maybe they should do a tool exchange deal! 😅

@geraldclemens1682 6 ай бұрын

Really like those impact tools. Predator generators have pretty decent reviews, couple quirks I have read about, but those linger around maintenence of machine.

@juantrevino8119 6 ай бұрын

I'm a harbor freight fan for sure, been using tools from them for over 10+ years and never had any issues. So definitely looking into some of there new stuff!!

@iamnotafraid 4 ай бұрын

The best part is when people diss your tools and then realize yours are better than theirs. I helped my buddy install a wall mount for his TV and his DeWalt drill could barely manage to get the bolts into the wood studs. To be fair, he only had small batteries for it, but it was still funny. I kept telling him to buy Bauer tools but he went yellow instead and seems to regret it after that.

@EcoMouseChannel 6 ай бұрын

I've been shopping HF since they had truck/trailer parking lot sales in random towns, and you'd get the color newspaper flyer before the weekend. They've obviously come along way, and I'm afraid to go back and add up receipts from over the years, rebuilding new workshops from scratch several times in my life.

@robertsneed7689 6 ай бұрын

Wow I'm impressed with those tools. They are really competitive with the big boys, Milwaukee ,DeWalt and Rigid. 👏🏾👏🏾👏🏾

@cricepot 6 ай бұрын

I love how most tools have there own case. Very important!

@EricGonzalez-bd1qd 5 ай бұрын

When he said, "I watch at 2x speed", I really felt that!!!!!! 😂😂😂

@rickmitchell5415 6 ай бұрын

Soo awesome Ryan,thank you for the upgrades with Harbor Freight

@shadeshiest22 5 ай бұрын

Love Harbor Freight, best tool store in America!!!

@resatchel4389 6 ай бұрын

I got that welding table the second I saw it was out. Perfect for my small home projects, I have already used this table multiple times. I only wanted and needed it as a table top since I have a large sold steel welding table I put it on so I turned the stand into a fish tank stand for my 35 gallon tank.

@jetenginethrust863 6 ай бұрын

Thanks for sharing, there's a lot of great new tools & stuff coming out. I've been buying Harbor Freight tools since 1997 down here in San Antonio, Texas. Harbor Freight has saved me a lot of money over the last 26yrs. 👍👍

@j76148 6 ай бұрын

I love my Hercules brand impact and electric ratchet. I charged both batteries over a year and a half ago and with my here and there basic work with them they are still charged and work great. Really goes to show the quality of the tools they produce. And with all my other tools I’ll buy harbor freight first if possible and if I break it twice (which isn’t very common for me) I’ll replace with a bigger brand name like Snap-On.

@JamesBrown-db9pk 6 ай бұрын

yup me 2 that purpel t box asummm

@marvelaturraz5405 5 ай бұрын

Great video! I never had this thought before--but I do NOW--to be looking forward to going to Harbor Freight to check out their high end tools! I am so glad that they've chosen to partner with their customers and improve everything in the best ways possible. I don't know of any other company which has done that to the degree that Harbor Freight has. Here's an unsolicited T-shirt idea: It's my own creation, and I'm granting all rights to it royalty-free, to any and all parties, in perpetuity. There is no licensing required. Harbor Freight is GREAT! I think that a patriotic theme with Red/White/Blue colors would compliment it well. 👍 Go team!!

@Tallchevy350 6 ай бұрын

Follow up question: Will Harbor Freight ever offer a 6k vehicle lift like the Bendpak LR-60P portable lift?

@purplebooger6410 6 ай бұрын

Or more in store welding support supplies?! Not a lot of options to choose from in the welding accessories?!

@ryanpalmer7854 6 ай бұрын

The roll the out row in the background got me😂

@lloydprunier4415 6 ай бұрын

I've bought stuff from HF since they used to come around and stay a few days with a semi trailer. Those were some sketchy products. Now they have stepped up their game and we have a choice like you show here. I am one who recently purchased the band saw stand and it is unbeatable for the price and way better quality than I was expecting. Hope they stay in business for the rest of my life for sure.

@mike9405715 6 ай бұрын

love the vids man keep them comin!

@garrettsctt 6 ай бұрын

I have a Ridgid impact that has the auto mode and it's great. When tightening a bolt as soon as it starts using impact it stops. It'll use the impact 3 to 4 times and then stops it definitely makes sure you don't over tighten or strip anything.

@xx_sm1l3ym3rk_xx7 3 ай бұрын

I order in 11nov got it in january, the series 3 tool box in orange, took over a month to deliver, but I got it in my favorite color in orange and everyday I go to work it always puts a smile on my face and gets me ready for the day. I love the company for having my color. I can't wait to get the top addition

@ljk5573 6 ай бұрын

I’m in the UK and we don’t have harbour freight stores.. if we did I’d be buying so much stuff!!

@DMAXRYNO 6 ай бұрын

I believe due to export issues, they sell in the US only.

@ljk5573 6 ай бұрын

@@DMAXRYNO yeah…😏 here in the UK quality tools are expensive!! I’m a contractor, if we did have a harbour freight I’d be like a kid in a candy shop!!

@christelting1359 4 ай бұрын

That trailer is a game changer. Perfect for light weight hauling. Motorcycle, ATV, construction supplies.

@jammils38 6 ай бұрын

Years ago you wouldn't catch me near hf for anything less than a throw away paint spray rig I used for one job.... now I have a shop full of hp tools and gadgets watching the emails for new things to be on sale so I can get it before there gone 😅 love me some hf!! I'm eyeing that new trailer and welding fixture table. Yeah those will be mine very very soon. I'm thinking at least 4 of the welding table kits for start.

@gavincardwell2223 6 ай бұрын

This video is awesome. I have a general tool cart that I bought from my dad’s cousin years ago and it’s still going strong.

@ozzstars_cars 6 ай бұрын

I'm a tool addict. Low price, more tools. Way to go Harbor Freight!

@Ken-wv2wg 6 ай бұрын

I love the tool trucks but the quality and prices are phenomenal on the new tools. The Baxter tools have saved my bacon on a few jobs

@evnrayash 6 ай бұрын

The clone of the knipex twin grips will be a great seller. That design is awesome

@Drewfvalencia 6 ай бұрын

Great video ry, love that your humble man 🙏🏽

@PunisherOfDeath101 6 ай бұрын

Job site tools and hardware is my go to. That ban saw attachment is bad ass. As an on the road tech in all about portability and compact tools.

@dustinjohnson3469 6 ай бұрын

Is there any plans to be able to buy and add additional drawers to the series 3 locker like you can for the icon locker?

@desertfox3860 5 ай бұрын

That was fun! Thanks for sharing!

@johnjones9387 4 ай бұрын

I’m into woodworking and some home rehab projects. Nail guns, air compressors, saws all types, clamps, routers, etc. great video 😊

@JohnDoe-xo7gg 2 ай бұрын

As I write this, I’m down to just the snap on truck at my shop. The rest have gone out of business. snap on is great, but way too expensive these days. I have turned to the icon line of tools and have been very impressed. I abuse them every day and they haven’t let me down yet!

@scubbarookie 6 ай бұрын

Harbor Freight is changing & revolutionizing the entire industry for all kinds of builders! The future looks great! 🌄👍💗🌌

@stephenfurr8769 6 ай бұрын

I have those Dollie’s with the stands. They work great! I move one of my cars around my large garage with ease!

@aldojer5543 4 ай бұрын

Awesomeness. Loved all the info. Keep it up!

@Ken-wv2wg 6 ай бұрын

That new plier line is reminiscent of Knipex and Snap On

@dbag222 6 ай бұрын

I think that’s the point lol cheap clones

@christophervienneau8125 6 ай бұрын

Im glad to see the upgrades to the jack stands the one i bought were recalled i believe, which sketches me out

@XDrippingxXBlood 6 ай бұрын

the guys sold me the new welding table the day it got in their inventory. was gonna buy the cheaper one. must say as a begginer it is a great table to start with.

@shanefarley3575 4 ай бұрын

I got a new 56” series 3 roller and top box in grey over Christmas, I love it. Looks amazing in my garage.

@dalegereaux1863 6 ай бұрын

Great tour of the Harbor Freight tools ! 👍

@huntercarrigan1854 6 ай бұрын

Love harbor freight can’t wait to test some new stuff out I had the recall jack stands and they fell apart while I was doing a exhaust lol so I’ve been looking for a new jack stand

@richhinton4233 6 ай бұрын

I purchased a Bauer impact driver around 3yrs ago i am a mechanic i use it daily with a 3/8 socket bit works great last all day no issues when it stops working i mite try the Hercules

@donlum9128 6 ай бұрын

Was at a Big O Tire shop in Utah, they were using HF cordless impact wrenches to remove lug nuts.

@DJ63phx 6 ай бұрын

I really enjoyed watching this video because I've been thinking about buying some of the Harbor freight stuff that you guys talked about.

@artszabo1015 6 ай бұрын

A very very excellent video - thank you so much!! Art from Ohio

@Slane583 6 ай бұрын

I've been eyeing that Series 3 tool chest in the purple color since HF released it on their website. I want one so badly to put all of my tools in but I just don't have any place to store it. Our tiny yard is to its' limit with what we can put up for buildings.

@R0GUEC0BRA 6 ай бұрын

I have a question about gen 3 Us general tool holder for the big boxes! For holding drills in the drawers!

@alangliniak9514 5 ай бұрын

I have a big kalimazoo horizontal bandsaw in my shop. My father in law gave me a HF portable bandsaw and although I was appreciative, I didn't really know what I was going to do with it. And that little thing gets used for everything

@terrellrhodes4256 6 ай бұрын

Sitting here geeked out for the purple coming in been wishing they would do purple and here it is 😁

@timothymckern8956 6 ай бұрын

Tell those guys they need to come up with a kit for the new lock mechanism to upgrade the old US general boxes with the single latch

@benratliff9157 6 ай бұрын

The new impact guns intrigue me, as i have a bus as an rv and it’s so hard to justify spending the small fortune one the Milwaukee 1” but it would be nice to be able to pull the tires off when doing maintenance. I’m curious if the 3/4” will pull them off 🤔 i know my old dewalt 1/2” would not do it.

@millwrightdad3753 6 ай бұрын

I’ll be buying the 3/4” impact wrench for sure

@hulkhuggett 25 күн бұрын

The only Harbor Freight tool I ever returned was a cut off tool. It worked too good. I couldn't even put it in my vice, it shook my whole work bench. And I definitely couldn't hold it in my hand. Also, I think it's worth noting, I bought a 21 gallon compressor 14 years ago. It gets used daily at my shop. I only changed the oil in it once. I've been waiting for it to blow up for years so I can justify upgrading it. It's still running strong.

@JJJobson 6 ай бұрын

I have all the icon pliers minus the snap ring pliers. Can’t wait for these to drop

@Breezer56 5 ай бұрын

Well we all don't need the top tools! I have a 72" cabinet with a 52" on the top and it's the best tool chest I've owned. Many Harbor Freight tools have gotten me out of trouble. Thx for listening to us.