Update to macOS 14.1 is stuck? Here is a solution!
Рет қаралды 65,546
Күн бұрынJoin my Discord for Questions & Answers: / discord
If your unsupported MAC is stuck during the update to macOS 14.1, here is a solution how to be able to complete the update!
WEBSITES:
=========
Latest OpenCore Legacy Patcher download:
github.com/dortania/Opencore-...
OTHER VIDEOS:
=============
Easiest Tutorial to instal macOS Sonoma on UNSUPPORTED MACs:
• Easiest Tutorial to in...
No Boot Selector on MacPro with PC graphic card?
• NO Boot Selector on Ma...
All MAC shortcuts & boot modes:
• Troubleshooting your M...
CHAPTERS:
==========
0:00 Don't jump every new update!
0:41 Invitation to my Discord server for troubleshooting
1:48 New OpenCore Legacy Patcher 1.1.0
3:09 NVRAM reset
5:05 Booting into Safe Mode
8:02 Don't forget root patches!
If there are any concerns about copyright, please do not hesitate to contact me! All credits go to the creators of OpenCore, OC Legacy Patcher and many more who made all this possible!
#JessiesFlying #MacPro #MacBook
@bencolemanjr 8 ай бұрын
Holding down shift and booting into safe mode worked for me. I had updated using the System Settings, instead of the previous times using OCLP to patch first. Thanks.
@JessiesFlying 8 ай бұрын
👍
@this2ndlife 3 ай бұрын
Thank you for this. Shift and enter worked for me after a couple of attempts 🎉
@diesmilingxx 7 ай бұрын
NVRAM reset worked perfectly! Thanks!
@stevensahyun5493 Ай бұрын
Jessie is an absolute hero! Thank you so much! Shift and Post install trick worked on MacMini 2014 with Sonoma 14.5
@JessiesFlying Ай бұрын
Great to hear! 🚀
@java2architect 7 ай бұрын
Dude, you are a lifesaver. I ran into this problem with OCLP 1.3 and Sonoma 14.2. I normally wait for a while before upgrading but decided to be reckless. Safe Mode did the trick for me. Had to do it 3 times. but eventually finished, then again in Safe mode had to install the root patches. Next boot without Safe Mode, it was stuck and I was about to power cycle, when suddenly the bar shot forward and now I am running 14.2 on my Macbook air. Salute 🖖
@JessiesFlying 7 ай бұрын
great!
@anupammahato1 3 ай бұрын
I am stuck on the progress bar, and i installed the oclp in safe mode, still stuck what to do?
@ZariyaJ Ай бұрын
How did you get it to finish downloading mines is stuck in the middle😭
@drea4161 14 күн бұрын
10hrs ago my MacBook got stuck on the logo. Thank you for providing clear and measured directions to help me restore my system! Great post!!!
@JessiesFlying 14 күн бұрын
@@drea4161 👍😬
@DJBennyswift 4 ай бұрын
Very interesting! I couldn’t get mine to work so I went back to Maverick and now to try to upgrade to Sonoma or something more than Maverick or Catalina. I’m still learning about OCLP for my 2012 MacBook Pro 9,2
@zumwild 6 ай бұрын
Thanks! Fixed. Just used these tips (PAM/NVRAM) on my White 2010 macbook 7,1, which stuck doing an update from Ventura straight to Sonoma 14.2! Going like a real champ with 16GB ram and 4TB ssd. I also used a USB hub and external keyboard until my root patches were in.
@JessiesFlying 6 ай бұрын
👍
@deerstalker9882 9 ай бұрын
Very quick and helpful, thanks!
@elias_meske 9 ай бұрын
You are a hero! Your videos are the most comprehensive out there about mac os legacy patcher!
@JessiesFlying 9 ай бұрын
😊
@osmith5086 5 ай бұрын
Thank you, Jessie! Excellent presentation and explanation.
@scooter12335 3 ай бұрын
I know several software programs but the hardware end of it I am at a loss. I wasn't able to connect to WIFI so I watched your video probably four times before I attempted to load the root patches after I had updated to 14.1 OMG it worked!Thank you sooo much from a newbie!
@JessiesFlying 3 ай бұрын
👍🚀
@songsan807 9 күн бұрын
Thanks for a great troubleshooting video. Had this same stuck screen issue and could not bypass it. Didn't know about the safe mode. Using that helped me bypass the issue and go to the login screen. Out of curiosity I used the Cmd + V to output the verbose information and my issue seemed to be something with some bluetooth drivers. After reapplying the OCLP post patch that fixed the issue.
@Kleber- Ай бұрын
Thank you! Shift and Post install trick worked on MacMini 2011 with Sonoma 14.5
@JessiesFlying Ай бұрын
🚀
@IUStudios 8 ай бұрын
Thank you so much I had a MacBook Pro that was stuck on the first boot up of macOS 14.1.1 & holding in shift while booting sorted it out.
@JessiesFlying 8 ай бұрын
👍😬
@dmccoyny 3 ай бұрын
I can confirm that this works! My mid-June 2012 MBP is now running Sonoma 14.4, w/ OCLP 1.4.3, successfully. It was stuck on the Apple logo screen, but I rebooted and selected the EFI boot drive + Shift and it finally finished and booted up! Then I just patched the MBP boot drive, and now it's fully functional. Thank you!
@JessiesFlying 3 ай бұрын
🚀
@nickcorr7244 4 ай бұрын
Thanks - needed this today with 7,2 MacbookAir that got badly stuck on reboot, this worked. I think it was associated with a big jump in OCLP version on venture 0.6.8 to 1.4.1 while on Ventura. Went all out and installed sonoma 14.2., had the stuck progress bar the did the safe mode shift button, on 14.4 using 1.4.1. 😅. This video was extremely helpful. Many thanks.
@JessiesFlying 4 ай бұрын
You’re welcome!
@limhengkry836 4 ай бұрын
NVram reset helped me, thank you so much
@isbjorn64 2 ай бұрын
The first method worked for me! Thank you!
@funshocornelius6906 4 ай бұрын
Thank you for saving my life. I was literally scared but this just released the tension in my mind
@Locky2701 9 ай бұрын
My 2 Mac Pro mid 2012 were updated to Sonoma 14.1 without issues,created a macOS from OPC 1.1.0
@JessiesFlying 9 ай бұрын
Thx for the info
@TCRTechLife 9 ай бұрын
You are just amazing. Thank you so much for all your help
@dieter4002 9 ай бұрын
Great job! It worked! Thanks!
@ojdidit84 7 ай бұрын
This happened to my late '13 MBP. I hadn't even updated yet. Was still on 14.0. Only updated OCLP to 1.21, updated root patch in preparation for the upgrade and got stuck after restart. Tried everything. Ended up creating a new partition on the internal SSD, installing there using a Sonoma USB I'd already created, installing OCLP 1.3 and restoring to the new partition. Long process but worked for me.
@netsolutionsvpn5571 Ай бұрын
This is one of the most useful tutorials I've ever watched on KZfaq. Thanks!
@JessiesFlying Ай бұрын
😊 sharing appreciated 😬
@charlymontiyourtube 5 ай бұрын
Thank you so much ! I recover access to my MacBook Pro after this video. I really appreciate it
@blackandwhitejazz 9 ай бұрын
Had to do this while updating from 12.7 to 12.7.1. Thanks!!!
@JessiesFlying 9 ай бұрын
👍
@marklochan3809 8 ай бұрын
Thank you sir for your video. I got stuck install Sonoma 14.1 on a 2012 MacBook Pro 13” 🙏
@odeyprincess6864 4 ай бұрын
Oh my God! This saved me!! Thank you so much. I was installing the Sonoma 14.3 on a MacBook Pro 2015
@MGFACECOM 4 ай бұрын
I have same problem… but it’s not working to me.. MacBook Pro 2015
@odeyprincess6864 4 ай бұрын
@@MGFACECOM Maybe you can reiterate the process. That helps
@Avik-ws8wk 4 ай бұрын
Thank you it helped a lot i was trying to boot in sonoma in my 2011 macbook pro and the bar always got stuck 75% but after the vram reset it worked
@HBProductions. 9 ай бұрын
After rebooting, selecting the OCLP EFI, and reaching the MacOS HD selection screen, press and hold the space bar and after a few moments you should see additional options to boot from, including the "Reset NVRAM" executable. Select it and proceed as indicated from there.
@JessiesFlying 9 ай бұрын
Resetting NVRAM doesn’t help here
@HBProductions. 9 ай бұрын
@@JessiesFlying I didn't say that was THE solution. In the video, it was suggested trying it to see if it helps users be able to conitinue the upgrade or a reboot into safe mode. I only gave an easier alternative on how to do such task which is simpler than doing a multi-button combo press which varies depending on the hardware kb you have. Everyone has a spacebar and that tid-bit of info isn't as easily found online by newcomers to Mac's.
@JessiesFlying 9 ай бұрын
@@HBProductions. ah, now I got your point. You’re right, but if you don’t have the OpenCore installed (yet) you still need the keyboard combo…
@tinyaroa 6 ай бұрын
Updated to 14.3 on a Mac Mini 2012 and it got stuck on boot, entering through safe mode (shift) resolved the issue, thanks!
@JessiesFlying 6 ай бұрын
👍
@edwardpickett1760 9 ай бұрын
I did a full install on my MacBook Pro 15" 2015 11,4 and all went well, I did this after the trouble seen by Mr Mac and yourself. I didnt mind reinstalling programs as most passwords are in my keychain and others I remember by second nature. Up and running with all programs and 14.1 installed in 2 and a half hours. Using opencore of course
@JessiesFlying 9 ай бұрын
Thx for the insight 🚀
@MrSilviut 4 ай бұрын
This helped me! Thank you!!! Specifically the safe boot
@JessiesFlying 4 ай бұрын
👍
@MikeMitterer 8 ай бұрын
Saved my day! Thanks
@josephfredbill 9 ай бұрын
Very useful. Also great to see you mentioning the other two :-). I hope they fo likewise and will comment there if they dont
@JessiesFlying 9 ай бұрын
Thx. We should all help each other
@josephfredbill 9 ай бұрын
@@JessiesFlying 100% agree
@Abzockdaddy84 2 ай бұрын
Bro, fantastic! Since weeks my Pro stucks on logon and thx to u and your solution with „Safe Mode“ I‘m able to logon again. You and my son („Dad, never give up“) saved me around 1.000€ for a new Mac! Great!
@JessiesFlying 2 ай бұрын
Great to hear! 😬
@therealartvalero 9 ай бұрын
Thank you! Great video. Your instructions worked! :)
@JessiesFlying 9 ай бұрын
Great! Sharing appreciated😬
@nguyennhattuan1657 4 ай бұрын
Nice solution with my macbook pro 2011. Great
@kasey9513 8 ай бұрын
You sir are an absolute legend I thought I needed to reset my MacBook entirely and now I’m running 14.1.1 perfectly 🎉🎉❤
@JessiesFlying 8 ай бұрын
Great to hear! 😬🚀
@jan.26 8 ай бұрын
Okayy, better try this method instead kasey, bcs the "upgrade" installment method showing failure for 3-4 times, I couldn't figure out how to disable the AMFI 😭 But atleast I could entered the safe mode to back things up, thanks for the tips Jessie!
@manwilly 8 ай бұрын
Thank you , I install sonoma in my mac pro 2010 and another mac book air 2017 no problem thanks again
@IdeasQueBrillan 8 ай бұрын
Work like a charm dude... Thanks for your help!!!
@JessiesFlying 8 ай бұрын
great to hear!
@ProductionTheOne 9 ай бұрын
Sonoma 14.1 works very well on my Mac Pro 5.1. Right after installing OCLP 1.1, I upgraded the Mac OS and during the system installation the process stopped. I restarted the Mac by holding the "option" button and when the startup screen appeared, I selected "EFI Boot". The Mac turned on again and the installation process was completed. After installation, bluetooth and wifi did not work as usual. Using a cable keyboard, I did "Post-Install Root Patch" in OCLP 1.1 and everything works fine
@JessiesFlying 9 ай бұрын
Thx for the info
@marekpee7492 9 ай бұрын
With what graphics card? For me on 5.1 with rx580 it works great but with rx5700xt the progress bar stands every time. 🤨
@JessiesFlying 9 ай бұрын
@@marekpee7492 there are no drivers for these GPUs yet in OCLP for Sonoma
@marekpee7492 9 ай бұрын
So I look forward to adding drivers. Thx! 😌
@injusticemattersuk4744 9 ай бұрын
It really depends how old your machinery is
@trevorpsy 9 ай бұрын
Hey Jessie. Inadvertently you solved nagging problem. You may recall several weeks ago my email saying that Photoshop ran very slowly on my unsupported Mac running Monterey. Turns out, I had not reinstalled the OpenCore boot files after upgrading to Monterrey from Big Sur. After hearing you address this problem earlier today, I went through the upgrade process again, reinstalled the OpenCore files, and all is well. Thanks.
@JessiesFlying 9 ай бұрын
great!
@Paul-hx6gx 3 ай бұрын
Thank you, Jessie for your help.
@jacquesgoude-Thewebus 9 ай бұрын
You saved 3 Mac today ! Thank You a lot !!!!
@JessiesFlying 9 ай бұрын
You’re welcome! Sharing appreciated😬
@LeonardoDabus 9 ай бұрын
Mine MacBook Pro Touch Bar 2017 did update without any issues (OCLP 1.1 and Sonoma 14.1). Had Sonoma 14 and OCLP 1.0 already installed and upgraded to 1.1 before upgrading macOS.
@JessiesFlying 9 ай бұрын
Great, thx
@doomnationalist 9 ай бұрын
Thanks for the amazing video
@alaaloll4832 9 ай бұрын
thank you so much ❤
@besz2189 Ай бұрын
Lifesaver video!!! Thanks very much!
@JessiesFlying Ай бұрын
😊
@AmerTofaiel 27 күн бұрын
Thanks man, it worked
@joaoparreira7310 8 ай бұрын
I have a MacBook Pro retina 2012 just reset the NVRAM and worked perfectly… after just had to repatch the boot…thanks a lot
@JessiesFlying 8 ай бұрын
👍
@VividTheater 22 күн бұрын
Your first option NVram reset got things going. I was stuck on the boot screen forever and I was getting irritated. A simple NVram reset was all that was needed. 😊thanks
@JessiesFlying 22 күн бұрын
@@VividTheater 👍🚀
@VividTheater 22 күн бұрын
@@JessiesFlying it’s running extremely slow though, and I just found out that my install only works in safe mode, it freezes when attempting to boot normal mode.
@JessiesFlying 21 күн бұрын
@@VividTheater try to install root patches again
@VividTheater 21 күн бұрын
@@JessiesFlyingDoesn’t work. Oh well! It was good while it lasted 😢
@VividTheater 20 күн бұрын
@@JessiesFlying I forgot I had Bitdefender antivirus installed on my unsupported OS which was causing the problem. Uninstalled it and rooted it again and all is good
@simsharala 6 ай бұрын
You saved my life. Thank you
@aftabmondal2817 3 ай бұрын
You are a savior. You saved my day. Thank you soo much... ♥️
@luisteloarriaga 9 ай бұрын
Nice one!!It did work ;)
@JessiesFlying 9 ай бұрын
Great!
@viktormario8239 3 ай бұрын
This helped me, your explanation are best
@JessiesFlying 3 ай бұрын
😬
@snewall 8 ай бұрын
I already had 14.1 installed via opencore legacy patcher and unfortunately attempted to upgrade to 14.1.1 via General->SoftwareUpdate and of course my system would hang on a boot. I followed your video and SUCCESS. From safe mode I could run the legacy patcher to apply the necessary drivers. Thanks a million!!!! I now have 14.1.1 running
@JessiesFlying 8 ай бұрын
great!
@Imanoob505 4 ай бұрын
Thanks it worked I was trying to fix this for a week
@JessiesFlying 4 ай бұрын
👍
@MridulNath117 8 ай бұрын
thank you so much Sir...Happy Diwali from India.
@JessiesFlying 8 ай бұрын
thank you - greetings back from USA!
@alexanderschumacher6703 9 ай бұрын
Great Video!! thank you very much😊
@JessiesFlying 9 ай бұрын
You’re welcome! Sharing appreciated😬
@greshamjansen8673 11 күн бұрын
❤thanks so much -I’m using an old model Mac Pro 2011 and graphics is on point
@JessiesFlying 11 күн бұрын
@@greshamjansen8673 😬
@equysis 9 ай бұрын
I ran a clean Sonoma 14.1 install in a macbook air 2012, and it run pretty well,no issues with oclp 1.1.0
@JessiesFlying 9 ай бұрын
👍
@sko556 9 ай бұрын
I have MBA 2012 also. How much RAM in your MBA 2012 ?
@MuhammadSohail2213 6 ай бұрын
Thanks!😂 You save my soul 😍
@janithdilshan4369 9 ай бұрын
Great.. very helpful ❤
@JessiesFlying 9 ай бұрын
You’re welcome! Sharing appreciated😬
@BLUE84 9 ай бұрын
Thank you Man, you are life saver
@JessiesFlying 9 ай бұрын
😬
@teslaevblog7363 Ай бұрын
Thank you so much 🙏🏼🙏🏼🙏🏼
@teslaevblog7363 Ай бұрын
Dear friend, Unfortunately, the loading process still doesn't work. I've set the root „rights“ again with open core. Could it be because my version of Open Core is 1.0.x? Unfortunately, I don't have internet with wifi in Save Mode. Alternatively, I have an old Windows PC. Can I use that to create a new version on USB and install it on the Mac? Thank you 🙏🏼 for your help.
@cosmicpapa 5 ай бұрын
Amazing ! It worked with this magic of „shift+enter“ ! Thank you 🙏🏼! But what’s the explanation behind ?
@JessiesFlying 5 ай бұрын
It’s safe mode that doesn’t load all drivers
@nickcostas 3 ай бұрын
Man you saved my life and also move pics and reformat thanks
@JessiesFlying 3 ай бұрын
👍😬
@MrMarioMetz 7 ай бұрын
1000 Thanks, you save me Christmas.❤ Lovely Christmas 🎅🏻 too you and a Happy New Year. Big Hugs my friend.
@JessiesFlying 7 ай бұрын
Merry Christmas for you! Spread the word!
@luigioctaviano 9 ай бұрын
For me, I installed the OLCP 1.1 first then updated my Mac to 14.1 via Apple's OTA update. The update works fine on my end.
@JessiesFlying 9 ай бұрын
Thx for the info
@epistrepho 2 ай бұрын
Thank you so much. You're the best. Great solution, thank you for your KZfaq channel.
@JessiesFlying 2 ай бұрын
😊
@mammefuad4158 9 ай бұрын
This is the same as what happened to me when I told you about a malfunction the previous time in the 14.2 update, and when I entered safe mode, the installation was completed, I activated the patch, and the system became stable ... You are a really great person for your efforts
@JessiesFlying 9 ай бұрын
Thx for your kind words. Sharing appreciated😬
@msurfer30 9 ай бұрын
14.2? Sonoma 14.2? But actually is 14.1 only.
@JessiesFlying 9 ай бұрын
@@msurfer30 He installed the beta
@mammefuad4158 9 ай бұрын
@@msurfer30 And how can that be? It is not available here to send you a picture through the comments to make it clear to you that it is 14.2
@traventraven1256 8 ай бұрын
14.2 is the beta version I think @@mammefuad4158
@bsdooby 9 ай бұрын
Didn't know about the CTRL trick to set the bootloader to set/boot the "correct" boot meny entry. Did you find a way to disable the startup chime, once happy w/ the installation? I cannot seem to disable it...
@JessiesFlying 9 ай бұрын
Just turn down the volume and reboot, the chime should be silent as well
@macmanjimmy69 9 ай бұрын
so using made the drive you select as "START UP" or "Blessed" drive, interesting learn something new every day LOL
@zulpluxx 2 ай бұрын
Hey I just started the new update and I have the white background (I’m in safe mode) I open Opencore patcher and press post install root patch but it says everything is already installed even though I’m still having the background issue and slow performance, what should I do?
@JessiesFlying 2 ай бұрын
In safe mode the drivers are not loaded, that’s why there’s a white screen
@fabioorfeo 9 ай бұрын
Hi, congratulations for your videos, I have a question, I have a 2009 Imac and the only thing that doesn't work for me is Bluetooth, do you have a solution? Thanks.
@JessiesFlying 9 ай бұрын
Try NVRAM reset
@patrick-jefferson 9 ай бұрын
It worked on my MacBook Pro 2012 too. After it got stuck with the progress bar at about one third, rebooting manually to the efi boot and then booting into safe mode, checking if Sonoma 14.1 was installed (yes!), opening Open Core patcher and installing the root patches and after another reboot everything seems to be fine
@chapeaubay 9 ай бұрын
How do you reboot “manually”? I am frustrated as any recommendation given here fails to get me beyond the “log in page”! I also don’t make it with the “shift” pressing into safe boot. Anything else I could “press” to get the system running?
@patrick-jefferson 9 ай бұрын
Hi @chapeaubay , with rebooting 'manually' I meant a hard reboot. Then you select the efi boot and when you get the selection of boot drives (like Macintosh HD) you select the boot drive while holding the shift key and then press enter. If your Mac keyboard (built-in or bluetooth) doesn't do that you should you could use a usb keyboard. I hope that will help get it fixed
@traventraven1256 8 ай бұрын
Same problems and solution here on macbook pro mid 2014 '13. Thank you very much!👍👌
@gilangsastrawijaya 5 ай бұрын
You save me... thankss ❤
@darione1275 8 ай бұрын
Many thanks, you solve me the stuck lodo problem after regular sonoma 14.1.1 update in my macbookair 13 mid 2013. Only another question: by default, when i boot mac it's appear every time the choice of uefi boot sonoma (only that choice) and after 3 sec boot up. Is possible to delete the option and boot directly? thanks again
@JessiesFlying 8 ай бұрын
keep CTRL pressed while selecting to set it as standard. if you mean the OpenCore boot selector, start OCLP, go to settings and decrease show time for menu to 0 seconds, install to disk and reboot (not recommended though, set at least 1 sec)
@moemeyer374 4 ай бұрын
Thanks your are my Hero!
@JessiesFlying 4 ай бұрын
😊
@ploesti1943 9 ай бұрын
Hello Jessie, I followed your instructions but still don't have graphic support for MBP 11,4 mid 2015. after following your instructions in this video and the previous Sonoma installation video
@msurfer30 9 ай бұрын
Did you patch system by OpenCore Patcher? I had the same (white screen and slow motion mouse) plus problem with WiFi conection for OpenCore Patcher (computer had connection all the time, expect patcher) on Mac 11.5 (early Pro 2015). After installing patcher version 1.1 Patcher could connected to net and patch system perfectly.
@ploesti1943 9 ай бұрын
I had done that but no luck @@msurfer30
@Cocalyse27 9 ай бұрын
Thank U !!
@bd1zzle Ай бұрын
I have og touch bar Macbook and it was on high sierra and then on day I turned it on and said corrupted file and so I wiped it and on os Monterey and it still won’t download to the MacBook. Now I gotta hit the Apple Store and get them to download something so it boots up again and I can use it damn it
@user-zv4dd5tw6k 7 ай бұрын
Hi Jessie,I am using catalina on a so13 imac up to a month ago i was succesfuly running monteray but it was a bit slow so thought i'd try sonoma. the core patcher loads install to an external drive but when i load efi to same external and proceed to reboot holding down option key. afterer entering pasword the only option given is to use internal hard drive. Boots back up to catalina. After watching your video tried the whole process again to a second external but same thing happened. I now have both monterray and sonoma on seperate external drives. Where should i go from here. Mick
@JessiesFlying 7 ай бұрын
You have to reduce security settings to enable boot from external drive. Go to recovery and check your security settings
@injusticemattersuk4744 9 ай бұрын
like listening to Jessie because he makes a lot of sense you can learn a lot from him brakes it down so easy looks like from all different angles
@JessiesFlying 9 ай бұрын
Thank you so much for your kind words! 🥰
@user-mn2rz1pr4r 9 ай бұрын
I prepared for a serious "fight", but after installing OCLP 1.1 on my Boot NVMe Drive, my 2009 MacPro 4,1/5,1(with 2x X5690, 96GB RAM, AMD Radeon RX Vega-56 & upgraded WiFi-BT Module) updated to Sonoma 14,1 through a OCLP-1.1 created USB Installer in less than 30 min. without any issues, it didn't end up stuck during the install & i even didn't need to run the OCLP-1.1 Root-Patches after the update because WIFi & Bluetooth were running...only needed a wired Keyboard in the Recovery Mode of the MacOS Sonoma Installer...
@JessiesFlying 9 ай бұрын
Yes, installing from USB automatically applies root patches during install. Great to hear! 🚀
@ttolorunsogo 8 ай бұрын
@jessiesflying. Hi Jessie! How do I join the discord group? A quick question please. Can I update my mbp early 2011 to ventura? The mbp runs smoothly on Monterey patch.
@JessiesFlying 8 ай бұрын
I don’t recommend Macs older than 2012 for Ventura or Sonoma… just click the Discord link in the video description 👍
@ttolorunsogo 8 ай бұрын
@@JessiesFlying thanks jessie
@GLow-um6nh 9 ай бұрын
so, if a new update from apple were out, then what would be the correct steps to update the version of macos on an unsupported mac? a) a minor update...e.g. 14.1 to 14.2 or 14.3? b) major update...eg from sonoma 14 to the next macOS 15? thanks!
@JessiesFlying 9 ай бұрын
Subscribe me channel and wait for a 👍, then update to latest OCLP, download KDK for macOS version you want to update to, then create USB with new macOS version and install (root patches already applied when installing with USB)
@Jason-eo4cg 4 ай бұрын
Booted into safe mode. Login screen showed up. But not restarting automatically.
@michaelvogelsberg179 9 ай бұрын
Thx👍
@rinysnoeren6283 8 ай бұрын
worked perfect for me on the iMac 27 inch 2013 and the MacBook Pro 15 inch 2012. I noticed that stickers no longer work in the messaging app since Sonoma. When you call up stickers, the window immediately disappears from view. is there a solution for that?
@JessiesFlying 8 ай бұрын
Anyone?
@ASobhi92 9 ай бұрын
I used to always have to boot into safe mode on my MBP 11,3 but not anymore. I think I may wait however for a more stable installation. I also have a MacMini 6,1 and iMac 15,1. I may try the iMac and report back
@ASobhi92 9 ай бұрын
Update: ok so I need Ethernet on my iMac 15,1 so that OCLP could find the latest KDK and install root patches. Otherwise I was booting to Apple logo and stuck. Had to bless the HD volume to the last snapshot to get back in and then used Ethernet to get internet access. All is well now
@JessiesFlying 9 ай бұрын
@@ASobhi92 thx for the feedback
@TheCaveStudioFilms 4 ай бұрын
Hi Jessie I have a 2013 cylinder Mac and it was working fine with Sonoma using 3.1 open core… until I installed 1.4.1 and now I’m locked out. I tried everything you described in this video.. I was hoping to have it come out of its start up coma… Would you have any other suggestions to offer it would be tremendously appreciated….. 😊 Thanks
@JessiesFlying 4 ай бұрын
Did you try NVRAM reset already?
@Efis42 3 ай бұрын
Nice video, but in my case it doesn’t work. No reaction, it seems, that icant start in safety mode?
@JessiesFlying 3 ай бұрын
Did you try this? UNSUPPORTED MAC stuck after Root Patch? Here is a solution! kzfaq.info/get/bejne/o7STndCn37mUhqM.html
@cityzenkane108 2 ай бұрын
Hi. Might be a bit much to ask. Early 2008 mac tower. Intel. El Capitan. I did Pram and the shift option. The time remaining bar does indeed appear but every time it jams at 1 minute. I’ve even left it over night! No joy. 😢 so close. Now I’m stuck. Thank you in advance for your help. ❤
@JessiesFlying 2 ай бұрын
Is El Capitan the latest official macOS (so to have the latest firmware)?
@cityzenkane108 2 ай бұрын
See above thanks. @@JessiesFlying
@stephenreeve6732 8 ай бұрын
I had no problem upgrade to sonoma on my unsupported Macbook Pro, but what I would like to know, I use Super duper to keep a full backup of my internal drive. This now crashes at the copping stage. Do you know if the is because of the patcher. Or is there another way to do a full internal drive backup and be able to restore it back incase yo need this . I'm a strong advocate for doing a backup. Great videos
@JessiesFlying 8 ай бұрын
It’s recommended to revert the root patches before installing any backup and then do root patch afterwards again
@sebastiaamengualobrador1448 2 ай бұрын
Hello! I just installed an update while on the desktop of my MBP 2014. The update seemed correct, but after typing my password the loading bar is not completed… I tried to use a new usb with a newer Sonoma version and the error is the same. I would appreciatte any help! Thanks for your videos 👌🏽
@JessiesFlying 2 ай бұрын
Do you have FileVault activated?
@alterramoda5821 9 ай бұрын
Safe mode does not always work. You may have to boot from latest bootable snapshot to finish installation.
@JessiesFlying 9 ай бұрын
Already working on that video 😬
Fabiosa Animated
Рет қаралды 9 МЛН
Cool Items Official
Рет қаралды 47 МЛН
MaviGadget
Рет қаралды 1,6 МЛН
One More German
Рет қаралды 1,5 МЛН
LED Screen Factory-EagerLED
Рет қаралды 7 МЛН