Upgrade Your Ford Escape Stereo With Wireless CarPlay

Upgrade Your Ford Escape Stereo With Wireless CarPlay | Step-by-Step Installation Guide

Рет қаралды 8,121

3 ай бұрын

@mattsworlddiy
Subscribe: / @mattsworlddiy
Links to products used: Please note that as an Amazon Associate I may receive a small commission when you click on my links to make a purchase. This, however, has no bearing on my review of any products. Thank you.
Android CarPlay Stereo: amzn.to/4a3pRPl
Looking to enhance your driving experience in your Ford Escape? Say goodbye to tangled wires and hello to seamless connectivity with wireless CarPlay! In this comprehensive guide, we'll walk you through the process of upgrading your Ford Escape stereo system to enjoy the convenience of wireless CarPlay.
In today's fast-paced world, staying connected on the go is more important than ever. With wireless CarPlay, you can effortlessly access your favorite apps, make calls, send messages, and navigate with ease, all without the hassle of cables. Whether you're commuting to work or embarking on a road trip, wireless CarPlay ensures that you stay connected and entertained while keeping your focus on the road ahead.
In this step-by-step tutorial, we'll cover everything you need to know to upgrade your Ford Escape stereo system with wireless CarPlay. From removing the original stereo to installation tips and tricks, we've got you covered.
Why settle for outdated technology when you can enjoy the convenience of wireless connectivity? Join us as we unlock the potential of your Ford Escape with wireless CarPlay. Don't miss out on this opportunity to take your driving experience to the next level. Upgrade your stereo system today and stay connected wherever the road takes you!
Remember to like, share, and subscribe for more informative DIY videos. Let's embrace the future of in-car connectivity together!
#wireless #headunitandroid #diy

Пікірлер: 94

@dontshowmyname5293 3 күн бұрын

I installed it in a 2013 Ford Escape, works perfectly. 7mm socket, T25s. Reposition the wiring harness first referring to where the screen slots in. I placed it next to the right air vent, maneuvering it in the back around the plastic piece containing the old radio. I did the 6gb of ram model, seems to be a bit faster than shown.

@mattsworlddiy 3 күн бұрын

WOOHOO!! Thanks for your comment and I'm so glad that you are having a good experience with this unit as I am. It's like having a new car! Congrats!

@kevinrose6340 Күн бұрын

HI, I am in the uk and have a 2015 Kuga i have just done a test fitting of the same unit, did you connect the key wires the position 1 and 2, so you can still switch the unit on when the car is switched off, thanks for putting the video on it's as a masive help Regards Kev

@MrChadRainey Ай бұрын

Hi, I was wondering how you got to the camera settings to have the factory backup camera to work? Cant seem to find the menu

@AhmetIde-my7kf Ай бұрын

Hey Mat I hope you are doing great,thank you too much cause ı ordered that product and will arrive in 2 days and ıt will be great gift to my wife for Mothers day. I am grateful to you for your lights about upgrade ...

@mattsworlddiy Ай бұрын

Thank you for the kind comment. I'm sure your wife will LOVE it. It brings a new driving experience to my car. Thanks again!

@Dualsportdisciple Ай бұрын

is there a difference between the 32G and 64G what does that mean? is that storage? Thanks for the video! Also how is the call quality? Does the Mic work?

@andregrzech3854 Ай бұрын

Great video ! Thanks for sharing!! My question is how or where do I plug the usb ? Thanks again!

@mattsworlddiy Ай бұрын

There are two USB plugs that are plugged into the line of ports (See video at 4:43). I decided not to use them, but that is something that you can decide if you want them. I hope this helps. If you decide to use them, you could feed the line down into the glove box if you desire. Good luck!

@jacobreuter 12 күн бұрын

Hey bro, excellent video and I definitely subscribed for the future. One question I have is - I am currently driving a 2015 Escape SE 1.6 Eco - is that the same model shown in the video? I am very much thinking about changing out my head unit due to the small screen, and this might be the best tutorial and example I’ve ever seen. Thanks for the content!

@mattsworlddiy 12 күн бұрын

Jacob, thanks for the very kind comment. Actually, I have the 2014 Escape SE withe the ecoboost. The unit I installed will work from 2014 through 2019. Thanks again!

@techieboy7443 2 ай бұрын

Hey there, just wanted to know if you could use the factory back up camera built into the car with this unit? Great video!

@mattsworlddiy 2 ай бұрын

Yes, you absolutely can use the factory camera. I replaced mine because it was having issues. Thanks for the kind comment!

@FredInnes 2 ай бұрын

Good video, helped to answer some questions, do have one still, will this use the factory microphone or does it only use the one that is included?

@mattsworlddiy 2 ай бұрын

Hey, thanks. I'm not sure about the factory microphone, so I added the one that was included just in case. Works perfectly!

@marywatson6335 16 күн бұрын

Thanks Matt! Next question where should I buy or even find for my 2014 Escape? I’m ready to buy but my current head unit says SONY & your control panel is different from mine. I’d love to give the Amazon tip $ but…. Also, loved your engine air filter replacement video. I’ll be doing that first 😊. Look forward to more videos

@BenCauble 7 күн бұрын

@mattsworlddiy, thanks for the video. Very informative. One question: did you disconnect your battery to ensure the power was all the way off? That seems like the right move to me but I'm not sure.

@mattsworlddiy 7 күн бұрын

Excellent question Ben. Yes, to avoid shock or blowing any fuses, it is a very good idea to disconnect the battery before getting started with this project. Thanks for the comment as I would recommend the disconnection. Prior to installation!

@BenCauble 7 күн бұрын

@@mattsworlddiyI figured, thank you for confirming!

@ahmetide4579 Ай бұрын

Hi its very good and useful video thank you ,ı have a question please ; ı bought 2018 Escape SE for my wife and ı definetelly upgrade it does that product works for 2018 and what is the product name, where ı can find ? Thank you

@mattsworlddiy Ай бұрын

Hey, and thank you for the kind comment. It will certainly fit the 2018 Ford Escape. It actually works from years 2014-2019. It's called Roinvou 2+64G Android CarPlay Stereo for 2014-2019 Ford Escape, Built-in Wireless CarPlay Radio with Android Auto, 9'' Touch Screen in-Dash GPS Navigation Support Mirror Link BT FM RDS AHD DSP. Here's a link. amzn.to/3JU79y5 Good luck!

@OwenRobbins-xz8wb Ай бұрын

Hey! Great video and a huge help. Will this work on all head units? Mine is a Sony one different to this one?

@oualidelmadaghri4073 8 күн бұрын

It doesn't fit well in Sony, I installed it in Sony today and it doesn't fit the same.

@OwenRobbins-xz8wb 7 күн бұрын

@@oualidelmadaghri4073 oh no really! Finally found one to order but I’m on the fence now!

@ChIeFgLiDeR100 5 күн бұрын

Hey, thanks for the video. I will consult this when the display arrives in the next few days. But I still have a question... the Kuga has a built-in microphone for making phone calls. Can I just plug it in or do I have to use the microphone that comes with it? If I can use the existing one, where do I have to connect it? Thanks in advance

@mattsworlddiy 5 күн бұрын

No problem. I am not completely sure about how the microphone connections work and if one will override the other. Just to make sure, I connected the mic that came with the unit. Let me know how it works out for you, and best of luck!

@AndrewXTrey 2 ай бұрын

Question. I recently purchased this, and it will be in tomorrow. You said a new top plate at the end???? Do i have to purchase that seperate??? Also, does the plate that goes around the front of the screen come with this radio already? Or is that separate too?

@mattsworlddiy 2 ай бұрын

Great question. YES, all of the pieces that you saw me install are included. It's amazing how well it all comes together. Just remember to hold on to the yellow clips from the original trim pieces because you will use them to put onto the new one. I hope this helps!

@icefrenchy 2 ай бұрын

Hello Matt I would like to know how your Android so far do you have any problem with it by the way nice video

@mattsworlddiy 2 ай бұрын

Hey thanks. Yes, I found that the wireless carplay can be a little slow to initiate, but if I connect the USB's to use it "wired" the initial response is much faster. Other than that, I am quite satisfied with the performance. Having the updated features that my original unit did not have makes it feel like an entirely new car. My favorite thing is being able to connect to the WAZE app on my phone for navigation. No longer do I need to use my phone when navigating. Thanks for the comment!

@icefrenchy 2 ай бұрын

Good morning brother I just like do you know which wire is the backup camera yellow or black

@mattsworlddiy 2 ай бұрын

The backup camera is the yellow (video) connector. I hope this helps!

@gabe7959 22 күн бұрын

How’s the unit working? Still firing up everytime? Also does the audio quality diminish once the unit is changed?

@mattsworlddiy 22 күн бұрын

Gabe, all is good actually. The only time the audio quality changes is when I put the car in reverse, the volume of the music goes down. This is a safety feature built into the programming, so that's cool. As far as compared to the factory unit, I don't notice any difference at all.

@amberallen9893 2 ай бұрын

Still working well? I have seen some less than ideal reviews about these Amazon stereos so hoping the one I ordered will work well. Thanks-

@mattsworlddiy 2 ай бұрын

Yes, working great. So much better than the "low tech" factory unit. All the best to you!

@JabberJabber628 Ай бұрын

Junk

@ahmetide4579 Ай бұрын

Hi again,unfortunatelly i wouldnt be able to give to my wife Mothers day gift cause i did everything right but it doesnt work.İts not opening

@kyo44000 Ай бұрын

Your radio antenna câble is it the black or the White? I dont know wich one tu plug in

@mattsworlddiy Ай бұрын

You will need to plug in the black so you can receive FM radio.

@Dclark4510 Ай бұрын

Hi. I have the android for 2017 escape and an iPhone. I can’t since my contacts for some reason. Any ideas as to what I need to do? Thank you

@Dclark4510 Ай бұрын

Need to add it won’t sync my contacts and iPhone “paired devices” is yellow but shows phone connected

@marklee188 18 күн бұрын

Do you know if this unit works for 2012 C-Max SE? SE trim doesn't come with Factory back-up camera.

@mattsworlddiy 18 күн бұрын

No, the earliest Ford vehicle that this unit will fit is the 2014 Ford Escape. Sorry.

@youandben 27 күн бұрын

Comment faire pour ajouter KZfaq sur CarPlay?

@lilmccluck 19 күн бұрын

if you use the oem backup camera how do you set that up with the unit

@mattsworlddiy 19 күн бұрын

I am trying to remember, but just make sure that you connect the yellow "video" cable which will tap into the camera feed. I hope this helps.

@lilmccluck 19 күн бұрын

@@mattsworlddiy so as long as that oem video cable is connected you shouldn't have to worry i'm just asking because i know other installs you have to add a bunch of wiring

@mattsworlddiy 18 күн бұрын

@@lilmccluck In my case, all I had to do is connect the video cable, and it communicated with the backup camera without having to add new cabling. I DID, however, replace my backup camera because the original had failed prior to this install. Regardless, I did not have to rewire anything for this unit to work. Best of luck!

@qbshi1644 3 ай бұрын

Hi Matt, I bought the same product. But mine was not on after I ignited my car. Did you wait for a few minutes for the screen to wake up?

@mattsworlddiy 3 ай бұрын

Actually, it just took a few seconds for the screen to wake up. After that, it took about a minute for it to cycle through the "Android" screen, then the home screen came on. Did you install it in a Ford Escape? Just make sure that all of the connectors are secure. I would also go back in and disconnect then RECONNECT the top most connection which is power for the display. I hope this helps.

@qbshi1644 3 ай бұрын

Thank you Matt! Yes, I was installing it on my 2015 ford escape. I am sure the radio I bought was broken. I have sent it back and been waiting for a replacement from the seller.@@mattsworlddiy

@mattsworlddiy 3 ай бұрын

I'm sorry to hear that the radio you received was broken. There's always a chance of that happening, but, hopefully, the next radio will work fine. I love how it performs!@@qbshi1644

@Proskhomen 2 ай бұрын

I had the same exact issue

@RussCarolAnneKusler-kl1et 15 күн бұрын

I have it all connected, but the unit will not power on. There is no instructions for the “protocol box”, which I think they also call canbus. There is a 20 pin outlet on the box, and a 20 pin connector, but that didn’t work. The email I received this morning from China has a simple diagram that looks like the 16 pin connector should go into the 20 pin outlet on the black box. Any help would be great! Thanks!

@user-qn6xw6di1r 10 күн бұрын

Hi Russ, I'm facing the same issue. have you figured it out. Thank you

@RussCarolAnneKusler-kl1et 9 күн бұрын

@@user-qn6xw6di1r No. I ended up returning them to Amazon.

@richardatkins5771 24 күн бұрын

Will this work in the UK?

@mattsworlddiy 24 күн бұрын

Interesting. I am really not sure. My GUESS, would be that it should be fine, but I am not sure if there are amperage differences, etc that may impact electrical systems. I hope this helps and good luck!

@mattsworlddiy Ай бұрын

Hello all. I have received many technical questions/concerns about this product and how to get it to work for various people. Unfortunately, I do not have all of the answers, but I do have some suggestions. If there is something that is not working out for you, please remember that the seller has a 30 day return policy so if you need to return the item, you can. Another option is to contact Amazon and they may have some suggestions on how to make the head unit work, or will be able to put you in touch with some technical help so you do not have to bother with returning the product. I am still very happy with my new head unit, and I hope that you can enjoy the same features that I do with this item. All the best, but I just wanted to know that some inquiries may be beyond my level of expertise. I want everyone to have the help they deserve and to be as satisfied as possible. All the best, and I am interested to know how the customer service handles your questions. Thank you and good luck!

@JabberJabber628 Ай бұрын

Ha ha , contact Amazon to ask them how it works. You must be joking 😅

@jamiemartz3234 28 күн бұрын

What can i do to control from the steering wheel

@ryanleonhard4328 20 күн бұрын

@@jamiemartz3234I just did this for my wife's car. For steering wheel controls and radio buttons. Go to Settings > Factory Settings > enter in the code 1234 and hit ok > go to CAN Settings > enter in the make, model, and year. if it only gives you one year option select it (even if it's not your cars exact year) > enter the CFG in (I set mime to LOW) > Enter in the protocol (it only gave me the option RISE) > save the Settings and let it reboot. This should let your steering wheel and radio push buttons and dial work for audio control and other things.

@Samsin361 14 күн бұрын

Hey Matt, I just installed it and having misses with the factory reverse camera. Do you happen to have and customer service numbers for the product?

@ismail9149 21 күн бұрын

Works it with Auto park?

@mattsworlddiy 21 күн бұрын

Yes it does work while in Park.

@terrencesharma4568 Ай бұрын

How do you get android auto wireless to work properly?

@mattsworlddiy Ай бұрын

I am not exactly clear on what the question is, but do you have an iphone or android? Make sure that select the correct icon on the main menu. Select "CP" if you have an iphone. I hope this helps. Let me know if you have any additional questions. Best of luck!

@terrencesharma4568 Ай бұрын

@mattsworlddiy I have an android I don't see any options for apple carplay or android auto

@terrencesharma4568 Ай бұрын

@mattsworlddiy I don't see the option for android auto

@terrencesharma4568 Ай бұрын

Nothing even happens when i plug my phone in

@averyhollifield8434 Ай бұрын

I have been trying to install mine but the display will not turn on and everything is connected correctly

@mattsworlddiy Ай бұрын

I would recommend getting in touch with the vendor to see if you can do an exchange. There may be a problem with the unity that you have. There shouldn't be a problem swapping out units. I wish you all the best. Keep me posted on any updates!

@JabberJabber628 Ай бұрын

Exactly the same with me . Everything installed correctly and the unit is dead

@krevandadele6118 Ай бұрын

Same with me. The second unit has the same issue it could be a fuse im trying to check on that

@ryanleonhard4328 20 күн бұрын

There is a little black square that it comes with. One of the white connectors plugs into the little black square. The unit won't turn on without it. At least mine didn't. Make sure every connector is connected on the back that is necessary except for the USB and aux camera connections.

@mattsworlddiy 20 күн бұрын

@@ryanleonhard4328 EXACTLY...thanks for adding that. This may help other's who are having issues. I appreciate your input!

@hollyschiffler4847 Ай бұрын

Mine is install and it is all android, I saw in the video it ended up Apple. Please tell me what we did wrong.

@mattsworlddiy Ай бұрын

I actually. had to figure that one out myself. When you connect your iphone to the unit, go through the menu and look for the icon with "CP" on it. That stands for "Car Play". It is not apparently clear that this is what it stands for, but once you select "CP" then you can access your phone. I hope this helps, and best of luck!

@hollyschiffler4847 Ай бұрын

I connected my phone through Bluetooth but can’t connect to car play. What am I missing? Still all android.

@Proskhomen 2 ай бұрын

Mine won’t turn on after checking all of the connections and reconnecting

@mattsworlddiy 2 ай бұрын

Interesting. If you are positive that all connections are solid and made correctly, You may want to contact the vendor. I know it's a pain, but maybe you have a faulty unit. The only other thing I can imagine is that I would check all fuses as well. Best of luck!

@JabberJabber628 Ай бұрын

Doesn’t turn on

@AzIz-bt8xo 15 күн бұрын

❤❤❤❤

@ahmetide4579 Ай бұрын

İ mean its not turn on

@mattsworlddiy Ай бұрын

OH NO!! Make sure you check your fuses and also double-check your connections even though you think they are correct. As a last resort, connect with the vendor and see if they have advice or what the turnaround would be on making an exchange. I am so happy with my system, I hope you can find a solution very quickly! All the best.

@ahmetide4579 Ай бұрын

I made everything and triple check,it not working and even its not turn on.Return it Amazon but im sure that they send me different item (might be item for Ford Kuga) by the way did i missed someting in video about Can Bus?

@ryanleonhard4328 20 күн бұрын

Honestly, this video was not nearly as helpful as it could have been. You barely show anything and even skip a few steps. If there is a setting you need to change you shouldn't leave that out and just say "oh I forget what it is". To those that need some more detail- I just installed this in my wife's 2014 Ford Escape. After connecting everything, you have to go into the factory settings to get the factory back up camera to work and the dashboard dial/buttons, and steering wheel controls to actually work. For steering wheel controls and radio buttons. Go to Settings > Factory Settings > enter in the code 1234 and hit ok > go to CAN Settings > enter in the make and model, if it only gives you one year option select it (even if it's not your cars exact year) > enter the CFG in (I set mime to LOW) > Enter in the protocol (it only gave me the option RISE) > save the Settings and let it reboot. This should let your steering wheel and radio push buttons and dial work for audio control and other things. It took me a bit to figure this stuff out, but I'm an electrical engineer and have worked on automotive industrial applications for years. Most people don't know what a CAN Bus is and it comes disabled by default. You really should have taken more time to show what you did to connect everything and explain it better. Could hardly see anything you were doing.

@mattsworlddiy 20 күн бұрын

Ryan, I appreciate your honest input and I completely accept any criticisms. Thank you for adding any helpful details as you did. Thank you again.

@BenCauble 2 сағат бұрын

What did you do to get the factory camera to work? I've tried all the various yellow input cables but still get a "signal lost" error when reversing.

@OwenRobbins-xz8wb Ай бұрын

Hey! Great video and a huge help. Will this work on all head units? Mine is a Sony one different to this one?

@mattsworlddiy Ай бұрын

I believe it will. I just finished helping my friend install a similar unit in his Mercedes Benz and it looked almost identical. The connections are pretty much the same regardless of brand. I hope this helps you and good luck!

@OwenRobbins-xz8wb 28 күн бұрын

@@mattsworlddiy fab news! What about DAB radio? Current Sony one has it, logic tells me that the radio connector supply’s the DAB signal, does it work on the new unit?

@mattsworlddiy 28 күн бұрын

@@OwenRobbins-xz8wb That's a great question. I am not really sure, but by connecting the radio cable to the unit, I am able to get FM stations loud and clear without any issues.