You're most welcome! Indeed, it's a very fun car to work on. Has a Traxxas Slash but I still prefer to play with this little car
@apineda7165 ай бұрын
Bigger brushed motor is way better for drifting!! Cool video!!! I always love brushless too! But as far as drifting controlably for this car in particularly this car..i think an upgraged brushed motor is the way to go an a better batter! Then u can drift controlably at the second setting with good speed, and also have fun at high speeds if u turn the remotel up to 3!
@MrYansonMRY5 ай бұрын
You are right. I prefer using bigger motor as it has more torque at low speed compared to smaller motor. The rest, one just needs more practices to perfect the drifting lines.
@thatsmyrc Жыл бұрын
awesome video I am going to build one myself for fun
@MrYansonMRY Жыл бұрын
Thank you 😊 indeed a fun little rc car to upgrade and play
@christiangolf2 Жыл бұрын
Dear Sir, Thanks for the nice video. I have the same question as another viewer. I bought the sg1605, which I will receive in the coming days. It's also regarding the spur gear in plastic. We can purchase a metal gear for the engine, metal differentials. So as a result we have everything in metal, but still a plastic gear in-between, which makes no sense to me. And what about the drive shaft (I can't find anything about it)? Is it plastic or metal and can we buy it as spare-parts? Do you have perhaps an email address from the factory, where I can get some information? Many thanks and best regards.
@MrYansonMRY Жыл бұрын
As far as I know, all parts are upgradable to metal except the spur gear. Don't worry, I'm still using the stock spur gear with brushless setup. (I have 5 plastic spur gears as my spare, just in case) I'm sorry I don't have any contact with the factory.
@alvinceh7 ай бұрын
Can you inform the pinion and spur size? Default pinion cant fit into brushless motor
@MrYansonMRY7 ай бұрын
I'm not sure the size but you can use a brushless motor with 2.3mm shaft diameter to fit the stock pinion and spur.
@jesseblamey6494 Жыл бұрын
just got mine a few weeks ago. did you do the brushless setup? Where can I buy upgrades for this car ?
@MrYansonMRY Жыл бұрын
Congratulations. It's a blast to build and play. Yes, I upgraded to brushless setup by buying parts separately. You'd need 2.3mm shaft brushless motor, brushless ESC and 3 wired servo. For simpler way, you might consider the ready package from them. All are included. I bought them on Shopee.
@davidseychell Жыл бұрын
Nice car but pinion gear is plastik no agbrade to metal enowing
@MrYansonMRY Жыл бұрын
Spur gear is indeed still plastic but it's very durable despite the brushless power. Plus, plastic spur gear is quieter than metal
@davidseychell Жыл бұрын
@@MrYansonMRY thx for yore opinion
@davidseychell Жыл бұрын
But there out side are e metal spur???for this car?
@MrYansonMRY Жыл бұрын
There's no metal spur gear yet. However I saw a video of pupil's mod using Mod1 gear
@richad11002 жыл бұрын
Does the brushed model still have the same 5 wire servo? Thanks!
@MrYansonMRY2 жыл бұрын
Yes, it does have 5 wire servo
@richad11002 жыл бұрын
@@MrYansonMRY thank you!
@MrYansonMRY2 жыл бұрын
You're most welcome
@villalba3420 Жыл бұрын
your servo emits some strange sound even if you do not move the direction?
@MrYansonMRY Жыл бұрын
So far no audible sounds from my servo so far even if it's not moving.
@SultanTuner1 Жыл бұрын
Try to adjust the steering trim knob and the steering d/r knob, just in case, if does not work try to turn the car off, unplug the battery and try again
@MrYansonMRY Жыл бұрын
Noted! 👍🏼 Thanks for the tips 🙂
@SultanTuner1 Жыл бұрын
@@MrYansonMRY I hope it helps 🤘🏿🤘🏿
@MobileDeveloper1965 Жыл бұрын
Does this car have bearings?
@MrYansonMRY Жыл бұрын
Yes.
@sharkusd2 жыл бұрын
What shocks are ? Any link? Thanks Nice video
@MrYansonMRY2 жыл бұрын
shopee.com.my/product/253439561/9173739006?smtt=0.6768520-1655629222.9 Here's the link. Thanks for watching 👍
@sharkusd2 жыл бұрын
Thanks
@likzen8876 Жыл бұрын
4:55 very wrong. u need to add it until full and set it with a little bit of rebound
@MrYansonMRY Жыл бұрын
Well, it's up to your liking anyway. I personally think it's sufficient as it's just a light rig not as heavy as other 1/10 scale rigs.