Upgrades for my New Desk Setup // Flexispot Standing Desk

Рет қаралды 52,768

Күн бұрын

Check out my new standing desk setup along with some 3D printed upgrades I made to perfectly suite my workspace needs!
Thanks to Flexispot for the collaboration. Their E7 is the best value standing desk with dual motors!
Dont miss the Flash Sale through 3.21-3.23, as low as $349.99!
For US buyers, make sure to use my code【YTB15】for an extra 15% OFF over $500!
For CAN buyers, use my code as well to get $50 OFF over $500!
US site: bit.ly/3yDpoSS
CAN site: bit.ly/3Fq6wKX
𝐒𝐓𝐋 𝐅𝐢𝐥𝐞𝐬
• EZPZ Phone Stand : bit.ly/EZPZp
• EZPZ Cable Clip : bit.ly/EZPZc
• Pegboard SD/USB Organizer : bit.ly/PegSDs
• X-ACTO Gripster Knife Cap : bit.ly/xactoG
• Sceptre 24" Monitor Vertical Mount
• TPU Desk Foot Covers : bit.ly/TPUfoot
𝐒𝐡𝐨𝐩𝐩𝐢𝐧𝐠 𝐋𝐢𝐬𝐭*
• QIDI CF-Nylon Filament : amzn.to/403NySk
• MatterHackers PRO Series PLA : bit.ly/PRO-PLA
• GreenGate3D 'Devin Montes Cool Grey' Recycled PETG : bit.ly/coolGrey
• VHB Double Sided Foam Tape : amzn.to/42bYbV3
• X-ACTO Gripster Knife : amzn.to/3Fn6yTK
• Sceptre 24" Monitor : amzn.to/3TdxATv
• QIDI X-CF Pro 3D Printer : amzn.to/3LtW74Z
• 3D Connexion Spacemouse : amzn.to/3lsSgdz
- 3D Connexion site : bit.ly/3DcXn
• 3D Connexion Keyboard Pro with Numpad : amzn.to/3FxZXGq
• FlexiSpot Desk-mounted Pegboard : bit.ly/FlexiA
*Some of these links are connected to affiliate programs that give me a small commission on each sale at no additional cost to you. Thank you for supporting Make Anything!
➠ Join Team Make Anything on Patreon : / makeanything
➠ Join the Make Anything Discord server : / discord
➠ My 3D Printing files on MyMiniFactory : mmf.io/makeanything
Blue Sizzle - Madness Paranoia by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/...

Пікірлер: 89

@make.anything Жыл бұрын

Yeehaw, I got a much-needed upgrade to my workspace with this E7 Pro Plus standing desk + accessories! Thanks to Flexispot for the collaboration. Don't miss their Flash Sale through 3.21-3.23, as low as $349.99! For US buyers, make sure to use my code【YTB15】for an extra 15% OFF over $500! For CAN buyers, use my code as well to get $50 OFF over $500! US site: bit.ly/3yDpoSS CAN site: bit.ly/3Fq6wKX

@Elektrotechniker Жыл бұрын

Is this 2-legged version available with a deeper surface plate? One that would extend more back?

@make.anything Жыл бұрын

@@Elektrotechniker you can technically mount any desktop on the legs, but I think you'd want the 4 legged model to keep things stable if you're going bigger

@RaidZeroSF Жыл бұрын

okay, that intro was really something else. 😂

@dwang085 Жыл бұрын

Incredible❤🎉❤🎉

@ianchroniak186 Жыл бұрын

Can we get a separate video on the 3D mouse? That thing looked really cool and I’d love to see how you’ve integrated it into your workflow.

@MrSpartacus575 Жыл бұрын

Obviously this doesn't substitute a good video showing its functionality but as someone who uses a 3D mouse every day for work I can tell you a little of how they work! It's essentially a six-axis joystick. Think of a normal gaming joystick as 2-axis control, you can push it left/right and forward/back with all the degrees between. A 3D mouse can be pushed left/right, forward/back, and up/down in addition to being twisted/tilted to the left/right, forward/back, and and clockwise/counterclockwise (think roll, pitch, yaw if that makes sense). That probably sounds weird but the best way to think about using a 3D mouse is that your hand on the mouse is a direct correlation to your hand 'holding the part' you're working on. So if you want to zoom in you 'pull' the part closer to you. If you want to spin the part you would maybe twist it clockwise to turn it around. If you need to access the bottom face of your part you would 'lift the part' while 'tilting it forward' so that the bottom face is now facing towards you. It allows for super quick and precise view control but it can take a few days of practice to train your brain to use it! Sorry if this was incoherent its hard to explain but I hope it made sense! haha

@ianchroniak186 Жыл бұрын

@@MrSpartacus575 thanks man that does make sense! Devin if you're reading this still make the vid tho

@Craftlngo Жыл бұрын

3D Mouses are around for quite a time. I've used them for twenty plus years. The principle is like described by @MrSpartacus575. Many programs support the use of it, not only 3D construction software. Also software like Blender, Maya, Cinema 4D and so on.

@SoniaMadiesh Жыл бұрын

Loved that intro! This is no joke though, the death of cells (cellular apoptosis) of the glute muscles can be observed when subjects remain seated for 45 min. To avoid it, it's adviced that we should get up every 30-45 min and do some (5) squats, or alternating the use of a sitting and a standing desk.

@kevinolivares505 Жыл бұрын

I absolutely love this set up!! I might take inspirations from this to adjust my own!!! I also suggest maybe putting all your monitors on a raised platform that way you are not looking downward at the screens causing neck pains over extended periods of usage. :)

@make.anything Жыл бұрын

Thanks, great suggestion!

@gutrali Жыл бұрын

I use a "wire hammock" style of under desk wire organization and its the bee's knees!! Plenty of room for all the extension cords I use removable zip ties to hold up the front edge of the hammock. When it's time to get in there and change something its super simple to just drop the front and have access to all the velcro straps holding everything into the hammock. There are steel bars on the front and the rear which make it extremely strudy. Mine is almost the width of the entire desk and fits between the desk legs PERFECTLY! I decided to tap into the power cord going to the desk in order to provide power to everything on the desk, so there are only two wires running down one of the legs of the desk, eth and power) because I have a laptop and micro external graphics card to power 4x 4k!

@cookiegeddon4938 Жыл бұрын

5:52 Wichtig; Immer eine Kopie vom Struwwelpeter am Schreibtisch haben 😂

@badlighting Жыл бұрын

You can save up more space on your desk by popping the pc’s monitors on a VESA mount.

@Dorff_Meister Жыл бұрын

Nice desk. Nice customizations.

@AliTweel Жыл бұрын

The comedy 100% The information 100% The usefulness 100%

@mjenx86 10 ай бұрын

My kids and I love the hilarious intro 😂 💀

@Noah-ek8hp Жыл бұрын

Gotta love this man’s abstract but thoughtful intros

@pkbreeze08 Жыл бұрын

5:54 Struwwelpeter! I’m not even safe here!

@freescape08 Жыл бұрын

Looks like the space mouse is a new addition, you're going to get wrist problems pretty quick like that. I've got an older style with a wrist wrest built in, but you could print your own rest for it. 😉

@TheThursty100 Жыл бұрын

I wanted to get a standing desk for a while and was eye balling Flexispot for a while now. You're the second KZfaqr that I watch that has one. Although the first one wasn't even sponsored and recommended it. But with this it's sealed that I'll get a Flexispot

@RabbitsInBlack Жыл бұрын

It's all good if your job is to sit all day but I stand all day and when I'm at my desk it's a freaken amazing relief.

@xathridtech727 Жыл бұрын

I have medical issues can't stand or sit too long but I found out about drafting chairs and those with a standing desk changed my life

@jakemeyer8188 Жыл бұрын

That...that crunching noise as he stood up...or rather, "uncurled"...

@conyakeyez1 Жыл бұрын

Absolutely amazing!!!! 🤣 😂😂😂

@afreire70 Жыл бұрын

The Struwwelpeter mousepad was great. Make sure to clip your nails.

@LeonardThury Жыл бұрын

I really hope you get to managing those cables under the desk with 3d prints, looking forward to your ideas on that!

@sevenismy Жыл бұрын

Can you mount the pc under the desk with 3d prints and use it for cable management?

@yarmar97 Жыл бұрын

Great content!!! Very interesting

@AdamWebb1982 Жыл бұрын

i need one of these!

@nottingham82 Жыл бұрын

Dang you Devin. Now I need that pegboard for my workbench

@JohnSimpson36 Жыл бұрын

I won one of their desks on Twitter and it made my fiancé jealous 😂

@SparkyFace5 Жыл бұрын

The thumbnail got me 😂 love it!

@Cartocopia Жыл бұрын

Looks like you old desk was the classic Ikea Jerker (my go to). How does this compare for size and stability?

@FunDumb Жыл бұрын

Did you need to longer usb and hdmi cables?

@questionablecommands9423 Жыл бұрын

You should use Synergy (by symless) so you can go down to one keyboard and mouse. When I needed to switch between Mac and PC all the time, but only had room for one keyboard and mouse at a time, it was a godsend.

@dwang085 Жыл бұрын

Definitely mount the pc to the desk. Gets it off the floor so you can easily clean underneath!

@ZURAD Жыл бұрын

Oh man those back snapping noises lmao.

@disabeast3667 Жыл бұрын

Any chance anyone knows a good filament color match for the green pegboard attachments.

@dogafrazao Жыл бұрын

You phone case is so cool, have you released the stl for it before?

@TheIncredibleVasher Жыл бұрын

also would love to see a close up of the phone case!

@Pidge-ON Жыл бұрын

for charging my wireless mouse i bought a magnetic usbc cable adapter and made a dock so i can just slide my mouse into it when im done and its charged for my next use.

@ThitoO Жыл бұрын

ahaha the intro is amazing

@mururoa7024 Жыл бұрын

Sorry to disappoint you about that Qidi PA12-CF, since you seem to like it very much, but it only contains milled carbon, which is just carbon dust, no actual fibers. All the strength of the material you're experiencing comes from the Nylon itself, the carbon just adds color. A 750g spool of PA12-CF based on chopped fibers costs $50 to $100 more.

@snailwtcher760 Жыл бұрын

you don't spot the ad if whole video is the one

@AbstractMediums 2 ай бұрын

Truly curious how you imported the image of that TV into fusion 360.... or if you built that in 360 also.

@make.anything 2 ай бұрын

I modeled that as well, just with some quick measurements of the length width height of the body and screen. I didn't try to capture every detail, just enough to make sure my print would fit well and work the way I wanted it to. It's really helpful to have a 3D reference of the object you're building for!

@SeraphimKnight Жыл бұрын

You can't see it in the video, but at the beginning he's actually writing in a Death Note in his bag of chips.

@maximthemagnificent Жыл бұрын

I use my lowest of my three motorized desk positions for kneeling (feels good when my back is aching sometimes, with a pad on the floor, which is also nice for my feet during Winter). Got a bit of dual-use out of it by locating the keyboard shelf I added so that in that lowest setting the table top itself is at a convenient height when sitting in my chair so I can use it for soldering or other projects (my monitor is on an arm so can be pushed back out of the way). it's useful but it does mean my desk is covered with crap pretty much constantly.

@bbradleyjoness Жыл бұрын

I want that rock climbing phone case. Where can I get it????

@make.anything Жыл бұрын

I haven't released it since it's only for the OnePlus 6, which isn't a super recent phone model by today's standards :P Maybe I can make a 'tool' for applying it to other phone cases

@bbradleyjoness Жыл бұрын

@@make.anything thanks for the reply. Maybe post on r/3dprinting if you release it? Great video man! thanks for the inspiration.

@Slurgical_3D_Terrain_Channel 7 ай бұрын

E P I C

@blackhawk2788 Жыл бұрын

“Sitting is dying” Me: **tries to sit faster**

@wyannick888 Жыл бұрын

Third youtuber I see with this desk in 2 days....

@StopLossLOL 6 ай бұрын

Is this the "E7" or "E7 pro" model? Thx!

@make.anything 6 ай бұрын

E7 👍

@uniworkhorse Жыл бұрын

0:07 He just like me fr

@Joshkashley1 Жыл бұрын

Another entertaining video from Devon but I'm here for the space mouse comments! 😂😂 Should I pull the trigger on this thing yet or what? Can anyone speak to its benefit to workflow? Is it really worth it?

@make.anything Жыл бұрын

I can definitely still improve with it, but it does speed things up a bit once you get the muscle memory. I mostly like it for the smooth movement that is good for demos, and I think it would be most helpful for 3D sculpting

@Joshkashley1 Жыл бұрын

@@make.anything noted! 👍👍 I think I'm gonna have to giver a whirl Thanks for the reply!

@tarunsahu1249 Жыл бұрын

I wd prescribe expressions bd to that Doctor!

@rdyer8764 Жыл бұрын

Stimulated many of my own ideas. Who could ask for more.

@DinoSpidersTV Жыл бұрын

Somewhere to eat cheese at!

@DinoSpidersTV Жыл бұрын

3:58

@georgeaura Жыл бұрын

So am I dieing cuz I'm in a wheelchair most of my life? Lol

@vineethnair8014 Жыл бұрын

2:09

@RaidZeroSF Жыл бұрын

poggers

@89rjw Жыл бұрын

"50g each which is about 10$ in total" Aren't spools usually 1kg and between 20 and 30$? So wouldnt 2x50g just be between 2 and 3$? What am I missing?

@IGrowLotsOfRice Жыл бұрын

He used carbon fiber nylon filament which is $100 / kg. Honestly couldve printed the part in something like PLA at $20/kg and made the part more solid only trade off would be the weight of the stand increases.

@89rjw Жыл бұрын

@@IGrowLotsOfRice why not tpu. That's what I printed my anti slip stuff with and its under 30€ oh well

@mxm-ok Жыл бұрын

Make Anything pulled an i did a thing

@seoulman2u 7 ай бұрын

I'm an actor who has not worked since May 2023 due to my union strike. That said, it would equate to no income since then and an extreme challenge trying to secure regular work when employers find out I'm an actor. I would like to pivot into making content. How can I get Flexispot to send my a E7 desk with a large under drawer?

@Nick-hm9rh Жыл бұрын

1:35 why does my guy look 3 feet tall

@achannelhasnoname5182 Жыл бұрын

Nobody needs a standing desk. Just take regular breaks and move your body.

@thinamo7750 Жыл бұрын

Standing desks are amazing. If you spend close to 100 percent of work at a computer it's nice to do some of that time while standing. You can't just take a 3 hour pause, but you can work standing. Also it's nice if you have several steps in your workflow that requires you standing, so you don't have to stand up every time

@ObsessiveGeek Жыл бұрын

Nobody really needs a 3D printer either…yet chances are you own one.

@achannelhasnoname5182 Жыл бұрын

@@thinamo7750 Nobody says you have to take 3 hour breaks. 5 minutes is enough, I don't know any job where you don't have the time to get up. Just standing isn't going to help your back.

@ObsessiveGeek Жыл бұрын

@achannelhasnoname5182 Yes, it is. It's medically proven. There are plenty of desk jobs where sitting for long times causes long-term damage to the back, it's why there's a whole industry of products that attempt to alleviate this issue. Five-minute breaks aren't enough so the better solution isn't to stop working, but simply to find a better position and standing will help. Breaks in this instance then give you a rest from being on your feet.

@edgar0517 Жыл бұрын

0:02 I haven’t started the video yet, merely seen a glimpse of the thumbnail. I’m going to guess this is another scrounged item from another extendable desk company, your going to tell us how sturdy it is, how easy the set up is and babble about setting heights which has changed how you live now……….well at least until the next company sends you theirs. I really do wish given your projected way of life that you have found this table in the dump and are up-cycling it to suit your needs and I hope I’m pleasantly surprised, but I do know every KZfaqr who projects the “save the planet” life will in the blink of an eye bath in a tank of crude oil if it meant a company would sponsor them or send them tat….well I guess I’ll find out in 11 minutes

@edgar0517 Жыл бұрын

1:46 didn’t even take 2 seconds to work out what your true ethics are, shame as you didn’t come across as being a hypocrite but cash is king are your morals are easily swayed I suppose

@edgar0517 Жыл бұрын

3:20 ticked all 🎉

@make.anything Жыл бұрын

I wish my standing desk could lift up as high as that horse you're on! 😜 I'm a product designer so I'm constantly promoting products I like on this channel, and I never suggested "not getting paid" to be one of my morals. Sorry for disappointing you but thanks for watching!