Upgrading My Longer Ray5 Laser! Rotary Roller Setup
Рет қаралды 1,421
4 ай бұрынInstalling a Longer rotary roller and leg extension kit!
My Laser Channel: / @laser.101
Longer Rotary Roller: s.zbanx.com/r/NwL0srcpyLHK
Longer Ray5 10w Air Assist kit: s.zbanx.com/r/MDshoUeQZJPD
Longer Ray5 10w: s.zbanx.com/r/FVj2HoUOUhfY
$50 discount code：R10HWA
TP Link Smart Plug (1) amzn.to/4bcuiZp
Longer Honeycomb:
s.zbanx.com/r/OG5nctaeJi5r
Leg extension kit: laser101store.etsy.com/listin...
@offgridwanabe 4 ай бұрын
cool
@BillEngrave 20 күн бұрын
My laser longer 40watt b1 is only moving up and down not left and right with the rotary connected any suggestions
@BillEngrave 19 күн бұрын
Well, nobody helped me so I’ll help whoever might be watching this and is getting confused like I did. The B1 access is not on top. That is the X you need to plug the rotary into the lower left of the frame. That’s where the YXS motor is.
@autorepairbymike1356 4 ай бұрын
are you supposed to manually move the laser by hand to the location of where your engrave is going to be? I keep getting limit warnings.
@SmitHVAC. 4 ай бұрын
You may have the re-home the laser to stop the limit warnings
@autorepairbymike1356 4 ай бұрын
@@SmitHVAC. Understood. Let me take you through my steps here. Machine off>plug in the extension for the rotary>machine on>enable rotary>hit "test" and I get a soft limit warning.
@SmitHVAC. 4 ай бұрын
@@autorepairbymike1356 that's interesting. Manually move the laser to the location you want it in, then hit the position button on the lasers display. It should set its home position.
Immersed
Рет қаралды 50 МЛН
Functional Print Friday
Рет қаралды 3,2 М.
Drunk Carpenter
Рет қаралды 6 М.
Steve Makes Everything
Рет қаралды 20 М.
Ninja H2 Moto Tourist Bogey Biker Highlights -Ride4 Isle Of Man Drive Motorcycle Race Crashes #crash
Motorhub_089
Рет қаралды 4,5 МЛН
VFX Anshi
Рет қаралды 9 МЛН