Upgrading the Paint Booth with More Storage

No video

Upgrading the Paint Booth with More Storage | I Like To Make Stuff

Рет қаралды 309,130

Күн бұрын

Come see how you can make the ultimate paint booth with a bunch of storage space!
GET THESE DIGITAL PLANS: iliketomakestu...
TOOLS & SUPPLIES WE USED(affiliate links):
kit.co/iliketo...
kit.co/iliketo...
MUSIC: share.epidemics...
Subscribe: bit.ly/ILikeToM...
Check out my TopVideos!: bit.ly/ILikeToM...
Learn 3d modeling, get digital plans, and cool merch at
iliketomakestu...
Want to support ILTMS? Get exclusive content and more...
www.iliketomake...
FOLLOW:
/ iliketomakestuff
/ iliketomakestuff
/ iltms
#ILikeToMakeStuff
About I Like To Make Stuff:
We have lots of projects including woodworking, metalworking, electronics, 3D printing, prop making and more!
These videos are our attempt inspire and empower others to make the stuff that they want to have. Hopefully you'll see something here that will inspire you to make something that you're passionate about!
Upgrading the Paint Booth with More Storage | I Like To Make Stuff
• Upgrading the Paint Bo...
I Like To Make Stuff
/ iliketomakestuff

Пікірлер: 332

@LogHouseFarm 4 жыл бұрын

I love rebuilding something that has been used for a while, taking care of all the little things that were not quite right - and hopefully ending up with a more functional space.

@Iliketomakestuff 4 жыл бұрын

Absolutely. Making stuff yourself really allows you to constantly improve your space.

@wolfpreist 4 жыл бұрын

@@Iliketomakestuff are you painting a sith holocron?

@dougshaver285 3 жыл бұрын

@@Iliketomakestuff Ah, the Jimmy Diresta pinned comment hot tub. Love it! I'm totally taping my Shop-Vac hose to more things. I used a steel clamp and one of those black coupling hoses for my router, but that doesn't work for everything. And if I lose the clamp....

@PlanetEarthLifeSkills 2 жыл бұрын

I can see a lot of this being a good booth for selling things in the web. I'd just make the whiteboard on the inside, skip the ventilation, and make the pullouts wider.

@miedan21 4 жыл бұрын

The packing tape I would recommend two layers of tape since it's easier to peel tape off itself and the outside layer would be the sacrificial layer.

@LogHouseFarm 4 жыл бұрын

I have the same LED strips, and I left them on for a while and checked for heat... I don't think the tape will melt, and the double layer idea would take care of the over-spray

@WoodUCreate 3 жыл бұрын

I was thinking the same thing too, but instead some weak scotch tape, then the packing tape, because packing tape would be very difficult to removed from the LEDs and could end up ruining them.

@superflan2000 3 жыл бұрын

You mentioned changing your blower to an in-line fan. Could we get a link to that? Love the project & thanks for the awesome video! I’m really inspired by your channel :)

@lmnojulia 4 жыл бұрын

I love seeing the paint booth evolve over time! Really fun to watch! ☺️

@Iliketomakestuff 4 жыл бұрын

Glad you enjoyed it!

@DOGormanAD 3 жыл бұрын

I Like To Make Stuff can’t wait to see how u incorporate more tech in the booth 👀

@adamglendye 4 жыл бұрын

“I’m Bob at ILTMS. I don’t like painting but I made another paint booth”. Great work. So much fun and evolution of the paint booth over the years.

@James-ys7gj 4 жыл бұрын

I spray paint for a living my spray booths we lined with wood and then spray a silicon layer which just peels off once it gets thick with paint just an idea it's cheaper than replacing the wood all the time and it peels off pretty easy

@eclsnowman 4 жыл бұрын

As a rule of thumb, silicone is the mortal enemy of a paint shop. Are you sure it's silicone? Most peelable booth coats are a latex based. To be honest you never want to get silicone near automotive paint, even WD-40. I was part of the team that got to go fix and replace another vendors ductwork at a well-known snowmobile and ATV manufacturer because they're installers used silicone and they're paint fisheyed for half a year before they figured out the root cause. Silicone caulking for example doesn't fully out gas for a really long time.

@James-ys7gj 4 жыл бұрын

@@eclsnowman Yes latex lol 😀

@justinvirtue1374 4 жыл бұрын

11:10 When you said "I'm gonna clamp these on" I didn't realize you meant it literally, but I guess you are the clamp champ after all

@Calucig 4 жыл бұрын

Great video as always One thing I want to point out is that LED do get hot as any other electronic or machine that uses electricity as energy. The difference is the amount of power they need. So, those small leds won't heat up much because they are probably 1 watt each or so. But people can get confunsed and think that all LEDs, no matter the wattage, will run cool, and that can lead to accidents.

@Moh_431 4 жыл бұрын

Imagine how cool this guys house is , everything bespoke and perfectly made✌️ WANT IT BUILD IT

@Iliketomakestuff 4 жыл бұрын

Nothing is perfectly made. That's the point of doing it yourself, you can continually make it better.

@LogHouseFarm 4 жыл бұрын

@@Iliketomakestuff perfection is far away, but I am headed in that direction 🤣

@LL-wc4wn 3 жыл бұрын

@@Iliketomakestuff imagine how cool this guy's house is... everything is imperfectly made

@PlanetEarthLifeSkills 2 жыл бұрын

@@LL-wc4wn hee hee hee. I have a litany for that concept... My daddy was a plumber and all of our taps dripped!!!!

@wa4aos 3 жыл бұрын

Since becoming an engineer back in the 70's, I have learned so much more than I did in college from youtube videos. This channel is just one of many EXCELLENT channels. Thank You Professor !!

@C3DPropShop 4 жыл бұрын

How did you know this is exactly what I needed. 🤔🙌

@jamesfenlon 4 жыл бұрын

Lol

@NicholasRehm 4 жыл бұрын

“Let’s go cut down some 2x4s” Music to my ears

@zacbao-dai3045 4 жыл бұрын

Nicholas Rehm hehe

@UncleJessy 3 жыл бұрын

Bob makes everything look so easy. Love it. I really need to get around to building a spray booth for the winters here in NY

@Shaggy45517 2 жыл бұрын

Since I moved to CNY It makes painting a bit tricking during the winter. Im planning a paint booth now for the workshop

@andrewbean3361 4 жыл бұрын

You should change the fan opening to be a little more like a ceiling fan,,, where it wont go straight in but it pulls from the four outsides of a square cover (that way any of the fumes that are higher up get pulled in awell)

@bojkovszkyzsolt2280 4 жыл бұрын

I was thinking about something like a kitchen fume extractor

@YouCanMakeThisToo 4 жыл бұрын

Really like the vertical drawers on the bottom and all the problem solving, thanks for the sharing the process 👍🏼👍🏼 and congrats on 3mil!

@calmartine9709 4 жыл бұрын

This is a really great thing to do, revisiting things and finding out, "what did I think would work well but didn't" and "how can I improve this knowing what i know now" It's a great strategy for lots of things and makes a really interesting video!

@Iliketomakestuff 4 жыл бұрын

Absolutely!

@maskedredstonerproz 3 жыл бұрын

as a programmer , and content creator , I second this , I lost count how many times I changed something in my program or video , and it ended up heaps better than planned even

@FigmentsMade 4 жыл бұрын

That is such a good idea to cover the LEDs with clear tape that can be replaced when it gets covered with too much paint.

@JaredMize9 4 жыл бұрын

I love your extremely nice way of saying "I know this is never going to happen but people are probably going to comment on this so I'll just pretend maybe this could possibly happen...." love the new booth!

@zacbao-dai3045 4 жыл бұрын

Nice upgrade

@Iliketomakestuff 4 жыл бұрын

Thanks!

@jlarts 4 жыл бұрын

Reusing scraps is awesome, I've just done that on a project I'm working on where I've been able to use offcuts I had kept to the side which I really wasn't planning or even expecting to use for anything so yay. I'd quite like space for a paint booth too but I've no idea where I would put one in my tiny workshop so I'll probably stick to cans of paint for now...

@Jaig_Eyes77 4 жыл бұрын

This is just what I needed! I think for me I'd like to take this frame and scale it down for myself to about 50% in size so It'll fit better in my tiny space...

@rover8066 4 жыл бұрын

Ayy version 3! Iterating to make something better is always a good time

@fryreartechnology7611 3 жыл бұрын

Prototype, prototype with repairs and improvement then final version without the bugs. That’s a project I would love to have in my shop some day.

@jamesfenlon 4 жыл бұрын

I do woodworking in school and since watching theses videos I have improved some skills and my teacher was wondering how I progressed so quick. So I pointed her to your channel

@forby_ 4 жыл бұрын

Nice!

@lredding9890 3 жыл бұрын

Eye hooks instead of staples to attach the surgical tubing tying it to itself or on the eye hooks

@dumbass4826 3 жыл бұрын

Its always awesome to watch Bob make things, i got inspired and built a home gym, i made a bench, power rack, pullup and dip bars as well as the barbell itself

@feltron 3 жыл бұрын

If you are still accepting ideas for a project, I would love to see how you would build a desk with adjustable height. With memory positions.

@alexreid4131 3 жыл бұрын

Love it!!! This is actually a mini version of an ambitious firewood drying booth I am designing with sliding columns. You definitely gave me some new ideas. Thanks Bob.

@TheGingerWorkshop 4 жыл бұрын

Awesome creative upgrade!

@christopherstromberg3070 4 жыл бұрын

I love how creative you get. I wouldn’t have thought to use a flexible line to hold them in place. Awesome man.

@Dirk41Rathman 3 жыл бұрын

Really enjoyed the sharing of the design changes/progression for the under the cabinet storage solution.

@torbenscharnhorst5755 3 жыл бұрын

@16:00 I really like your great video. Just one point: no matter if bar goes from top zu bottom, the force get's in the system were you grab the bar.

@kylelaing4561 4 жыл бұрын

Another fantastic job Bob always keeping me entertained in the video from start to finish

@PatDinucci 4 жыл бұрын

The paint booth I never knew I needed. Amazing

@linod7265 3 жыл бұрын

Great up-grade, just one simple suggestion, the booth uses lights and fans at 12dcV , it can work with a solar panel off-the grid so it can also can be an emergency light for the shop. Just an idea. Great videos!!!

@nils1953 4 жыл бұрын

Thanks for keeping the video all in one part! Great idea with the stretchy tube around the cans!

@ffanddcondragh2911 4 жыл бұрын

Research lath screws. They are like truss head screws and are great for attaching thin materials without haveing the bugle head of a drywall screw sticking up.

@jonatham35 4 жыл бұрын

6:16 "It's a bob in a booth!" 😀

@Teklectic 4 жыл бұрын

That's an awesome build, definitely something I'd like in my shop! I think for the rattle can shelves I would add a second string of rubber towards the bottom or maybe a small lip so that the cans can't accidentally slip out.

@CLOUDZAUBACKUP 4 жыл бұрын

Good job

@sapelesteve 4 жыл бұрын

That turned out great Bob! Can't wait to see what improvements you come up with & add to this booth down the road a bit....... 👍👍😉😉

@JasonECI 4 жыл бұрын

You made everything bigger, heavier and "luxurier", seriously it looks great! With limited budget with limited skill, I think I will just stay with 2x2 frame, corrugated plastic (or vapor barrier), with 2 paint can karts underneath! There's always a gap between what we see great and what actually come out. Thanks for the video!!

@danielrisueno8003 4 жыл бұрын

Best channel ever

@robnhannon 4 жыл бұрын

You keep making my dream shop more complex. Great work.

@teresabell1014 4 жыл бұрын

Great job, especially liked the black tubing to hold the cans in.

@LanceMcCarthy 4 жыл бұрын

Tape over the LEDs was genius

@MultiDazzle123 4 жыл бұрын

U da man...man. that is one of the coolest paint booth I have ever seen.

@masterofnone 4 жыл бұрын

Another useful project for all the makers out there

@Iliketomakestuff 4 жыл бұрын

Absolutely

@samaker4 4 жыл бұрын

Ok That surgical tubing idea is genius. Great build

@SchysCraftCo. 4 жыл бұрын

Project turned out very well there keep up the great craftsmanship and hard work my friend keep making

@tooljourney 4 жыл бұрын

nice work bob

@DirkieB 4 жыл бұрын

The sliding storage is awesome!

@taylancooper319 4 жыл бұрын

Love the video and great job on the paint Booth. Hope you all are doing well.

@Iliketomakestuff 4 жыл бұрын

Thank you! You too!

@JasonPatz 3 жыл бұрын

The packing tape LED protector was such a good idea!

@4hedgesfamily 4 жыл бұрын

Nice! I use an old dishwasher box with an small fan held in place with iron tie wire.

@BrettS02 4 жыл бұрын

Wow cool video!

@srijankarunakaran165 4 жыл бұрын

This is amazing!

@Iliketomakestuff 4 жыл бұрын

Thanks!

@nix_finity4848 4 жыл бұрын

one thing That i think will cause the problem. that elastic thingy you use to guide the can is not enough... If its not fully loaded, there will be space... When you accidentally hit your knee or ankle (that will be so painful) the can will fall and roll over the place.. Nice build btw..

@BruceAUlrich 4 жыл бұрын

Love the ideas for storage in the drawers below!

@Iliketomakestuff 4 жыл бұрын

Glad you like them!

@DoctorMGL 3 жыл бұрын

this man is genius

@Warshipmodelsunderway 4 жыл бұрын

Great project! The surgical tubing was a clever addition.

@sta4tic470 4 жыл бұрын

I kinda forgot about this channel and I just remembered about it and it's just as amazing as I remember

@josephdionisio6947 3 жыл бұрын

Another option to hold down the spray cans would be to utilize short pieces of PVC pipe stuck together as a makeshift organizer. I imagine it would also prevent the cans from falling over when you pull on the drawer and the shelf isn't full. But either ways, another inspiring video!

@phylismaddox4880 4 жыл бұрын

Cool project! You might consider using restaurant grade plastic film to cover your surfaces. Like the strapping tape covering the lights, it's easily replaced as needed - and saves on repainting. It's also relatively cheap at restaurant supply stores. I love the storage idea. My only concern is that your ventilation hood is too low. But I'm definitely stealing the paint cabinet idea! Thanks for a great video!

@CrosshairLunchbox 3 жыл бұрын

One thought I had was to put the triangular baffle on a rocker rather than have it fixed with the triangles. Basically put the rocker at the horizontal centerline of the fan opening. When you are spraying hanging things towards the top you rock/toggle the baffle so the wide part of the triangle is up. When you are spraying things on the turntable near the bottom you rock/toggle the baffle so the wide part is on the bottom (like you currently have it permanently).

@chauffeurmarco Жыл бұрын

I love yours. but it's very convenient to have a nice big shop

@RianReview123 4 жыл бұрын

I remember watching your original paint booth video when it came out! Crazy how fast time goes, seems like just a few months ago! Keep doing amazing work!

@Iliketomakestuff 4 жыл бұрын

It does!

@Dsgj 4 жыл бұрын

you could use washers on the screws for the net just to be sure it doesnt slide out :)

@bonserk 4 жыл бұрын

Nice easy build for a common need in a multi use shop. Love your videos and podcast! You are part of the good in the world. One thing you mentioned that isn't in the description is the upgraded fan. Perhaps you can share that info with us?

@franskamstra2728 3 жыл бұрын

for all wondering about the pc fans. go for the arctic pwm F12 fans. they come in a 5 pack for 20 to 25 euro. great prive and they are able to be daisychaned

@JointerMark 3 жыл бұрын

Another good solution. Thank you for posting this.

@DrLoveQc 4 жыл бұрын

Bob, a suggestion for next project! you should make a spray can warmer device, made with aluminium or something with thermal conductivity, with the same shape as the can with a set temperature display so you can dial it and get your can always warm before and while using it. If cans has too many different shape it could had sides that move toward the center to touch it at many spot to warm it gently. nice content as always! I like the paint booth! if you need more powerfull inexpensive LED 12V DC, check aliexpress with WHITE DRL COB. its about 14cm yellow rectangle COB led with a black surrounding. The light coming from thoses are great, even better if you use a small PWM module to you can dim it very easy (if needed). Use many of those none had fail

@ogrerocks 4 жыл бұрын

The best way I've found to fasten surgical tubing is with a marble. Feed the surgical tubing through a hole, insert a marble that's bigger than the hole into the tubing into the tubing. Deburring the edge of the hole so it doesn't cut the tubing. Getting the marble into the tubing can be tricky, but rolling the tubing back onto it self (like a rolling up your pants) is the easiest way.

@chefgoldielocs 4 жыл бұрын

@6:37 Making a paint booth in paint splattered sole shoes😁

@forby_ 4 жыл бұрын

They're designed that way 😄

@zacprunty 4 жыл бұрын

Zoltan! Next up - bubble wrap paint booth suits.

@mjsimunovich013 3 жыл бұрын

You made sliding spice rack pull out drawers for paint cans. You could’ve used horizontal fans too.

@stuffandthingsworkshop3555 3 жыл бұрын

How many other people's Alexa devices couldn't find a device called exhaust. Gotta love technology 😃👍

@DistinctGamer_ 4 жыл бұрын

I thought your idea was cool for the fume problem around 5:00, but the way I would have gone about that is to make a hole as you did, but then add a board with 1" risers to go over it. That way, you can't spray directly into the hole but you also get suction from all around it from the blower.

@cabojay12 4 жыл бұрын

Great work and love the shop

@sitalkumardas3258 4 жыл бұрын

Thank You.

@FredMcIntyre 4 жыл бұрын

Nice upgrade Bob! 😃👍🏻👊🏻

@MigMonkey 4 жыл бұрын

Love the design, I definitely need a paint booth. Tired of all my projects having bugs in the paint from being painted in the yard. Also looking forward to seeing R2 get his feet now that you've teased us with this..

@MCsCreations 4 жыл бұрын

Fantastic work, Bob! It looks much better! And I really liked the tape idea! 😃 I'm going to need to build something like that for me as well, but I don't have much space... I'm thinking about your first design! Something like that! 😊 Anyway, stay safe there with your family! 🖖😊

@InfiniteCraftsman 4 жыл бұрын

Two cans...two cans...two cans...SAM! Say it! Finish the line!🤣

@matt34dogify 4 жыл бұрын

A cheaper version of the fan solution would be to get some clamp fans for dorm rooms at Walmart or target or something. It allows you to angle it to whatever you want and little restriction

@johnherrington1110 4 жыл бұрын

8:12 Looks like 1/2" hardware cloth. Pretty handy stuff.

@reforzar 3 жыл бұрын

Love that storage solution. Might have to make some.

@taylormcintyre5759 4 жыл бұрын

A suggestion for the exhaust fan, make the cover flat so it can suck from both above and below, especially since you’re planning on hanging things.

@sortafast.industries 4 жыл бұрын

Interested to see the fan you chose now, that’s the part that always scared me on an indoor paint booth

@cooperhoelscher7463 4 жыл бұрын

Bob should do more stuff with mark Rober

@topsniper99 4 жыл бұрын

The paint booth looks awesome :) i dont know if you plan on changing anything about it yet, but you could probably put the fans on some flexible arms like the ones you would have on your soldering station, but more stiff. You could add some little ring lights to them too, because you can never have enough lighting.

@wolfwoodworkingcreations4321 4 жыл бұрын

I never new I needed on of these until now. A strip of aluminum behind the lights and under the tape should dissipate any heat from the LED if it becomes an issue.

@MyrrdynWhitefall 4 жыл бұрын

4:10 Bob, have you thought about making the top slope down about 30° to 45° towards the back of the booth?

@RedHeadKevin 3 жыл бұрын

That would dramatically reduce the internal volume of the spray booth. Which is a good thing.

@Andrew-rv1xq 4 жыл бұрын

I also like to make stuff. Thanks for being you, Bob.

@David-jp5mo 4 жыл бұрын

Nice build! That helps me with some ideas I’ve got for a small parts booth. Thanks!

@woodlandburl6648 4 жыл бұрын

HEY I ‘M WOODLAND BURL AND I LIKE TO WATCH YOU MAKE STUFF!

@andydanganan2506 3 жыл бұрын

Perfect!

@Usonian7 4 жыл бұрын

Awesome build! The packing tape I think great, I know I have a tendency to over think and over build. I want to mention the hardware cloth hanging system, (as a painter by career) I think that might cause some dust issues. I definitely plan on using the drawer system soon!