Thank you. You flatter me. I ,m not typically details obsessive or pedantic, and leave the finish of my bikes and guns Rough’N’Raw.

牛逼

@@cynricloyloy8953 THANKS A LOT

ช1เฝ.@STEINBVG

Thanks.

Glad you like it!

yes.

its perfectly functional. it just doesnt fire.

Yes. You got it.

how?@@nowstopwhining

Thanks a lot...you should see me bake a cake)))

Thank you! Cheers!

​@@STEINBVG where can i buy or what will you call your company?

@brysonishesh Homemade. Not for sale

I hope don ,t have to…

​@@STEINBVGwhat you talking about? An Apocalypse is amazing😅

❤​@@STEINBVG

You forgetting that there's also other "him" with diferent agenda out there .

??

Yes, it was improvisational and built using existing plumbing parts and their standard measurements. For instance 1/2” x 8” threaded steel plumbing nipple for the receiver. Th end cap, trunnion ( if I were to make one) are simply corresponding 1/2” threaded fittings. Thanks for watching. This project if you watch all the videos is not a difficult to emulate without any plans, if one has mechanical inclination and skills.

Thanks

Thank you. You understand correctly. You can learn a lot from watching videos on channels like mine. And reading descriptions/ comments. That,s how I have learned and still learn. Good luck.

@STEINBVG thank you sir honestly I truly thought that you were army fire arm's specialist or professional gunsmith, one thing is for sure is that I won't be able to produce the same quality that you deliver but like I said I will study all your videos and try to produce at least a safe working fire arm for protection I have so many project that I won't live long enough to achieve everything but doing a fire arm is.now my priorities thank you for your videos. i noticed that your videos are well detailed and easy to follow so again frome a Jak of all trades, inventer of all sorts respect to you.

Glad to be your friend. Thanks.

Thank you kindly!

Thanks, not sure though what you referring to, but many complained about the spring guide protruding from the back . I have fixed that, see my last video. Now the spring and guide are internal,and clean .Watchkzfaq.info/get/bejne/ZrSJgJZjtafcgWw.html

Thanks. Unfortunately - not that many comments. Thus not difficult to answer. I wish people were more curious and participated in the discussions more and constructively. Perhaps when there are more hard core subscribers….

Una belleza

Thanks . Not sure what you mean by an upper assembly. It does have all the parts , upper and lower . Minus the barrel and trunnion . That,s where I drew the line in the sand. As is it remains a fidget for a 50+ y.o. nerd. Or a fancy paper weight.

Thanks. I build improvisationally. Never make blue prints. If you watch many of my videos- it,s clear. I do not hands-on teach. Capable mechanics can decypher the builds just by looking.

Thank you kindly!

Thanks a lot.

Thanks. Can you give me the link? I want to see that video too.

THANKS A LOT

Thanks. I had to stop at some point. It looks almost complete, but it,s just a paper weight. To make something like this work , there would be much more to do. It,s just a Concept, made of crappy common materials.

Не проблема. Дерзай! Поделись потом как вышло

Если он Русский, то наверное не в России живет.

@@ivan1982ize разве канал не показывает где я живу?

@@ivan1982ize какая разница где он живёт?

@@STEINBVG Да теперь понял, в США.

Все правильно . Это временный компромисс. У оригинального Уру, как и у ППС43 пружина тонкая на направляющей и проходит сбоку( ППС) или сверху(Уру) затвора избегая контакта с УСМ. Я вначале хотел проще, пружину диаметра на всю коробку, как у Стена или других простейших ПП. Но из-за специфики УСМ подобного УРУ , пружина тормозилась шепталом одиночного огня( задний бугорок) и пришлось уменьшить диаметр пружины и поместить ее на направляющую- которая выходит наружу. Я собираюсь переделать аналогично ППС, но чтоб ручка затвора держала направляющую и тонкую пружину. Нет времени пока да и желания…

​@@STEINBVGталантливый ты тип, держись подальше от ментов! 👍👋

Спасибо. Так и делаю- живу в США.

77% лишнего, избыточные узлы и навороченные в технологической сложности изготовления детали

Перечисли что бы ты убрал лишнего?????

Understood without translation. Thanks a lot

Спасибо. Все сделано как говорится на коленке. Использовал болгарку, сверлильный станок, дремел, напильники, наждак. размерны исходных метериалов в американском стандарте подходили друг к другу без нужды токарить. Магазин строить нет смысла и очень непросто - многие профессиональные компании использовали уже существующие доведенные и чужие магазины- от этого зависела надежность. Я использовал магазин от винтовки Хеклер-Кох 270( культовая штука) kzfaq.info/get/bejne/a59pn9J_sbjdoo0.html

THANKS FOR VISITING. THE ANSWER IS STILL NO

THANK YOU

How long u've been into smithing

Got my firearms is license and started to work on guns since Covid. Couple of years, but I have a long track of mechanical skills. To be a diagnostician, trouble shooter as an MD disciplines thinking and helps too

Thanks

The louder I do something , the louder they go.

Glad you enjoyed it

All the info in the vids and descriptions. Thanks

Thanks, will do!

Спасибо дружище. Вас также. Посмотрите все мои видео на канале об этом ПП. В первом эпизоде я дал ссылку на 2 видео показывающие механизм и стрельбу реального бразильского УРУ 9мм. Я скопировал УСУ в точности. В двух словах на курке 2 бугра- передний - боевой взвод, задний- разъединительный который ловит затвор на откате при нажатом пальце- отпустив курок затвор соскакивает ~ 10 mm вперёд на взводной бугор. Это одиночными. При очередями- переключатель огня опускает задний бугор ниже затвора. Тот продолжает туда сюда пока не отпустишь или патроны закончатся. Все это видно в моих и чужих видео. Помните, это открытый затвор, самый простой- фиксированный боёк на его передней части: поднял патрон и загоняя его а ствол- пробил капсюль . kzfaq.info/get/bejne/j7-JoJaZubGVj4k.html

O borular ve mekanizma çapı kaç iğne sabit mi

@@STEINBVG принял, благодарю🙏🏻😉

@@yilmazbozkurt6952are you asking what is the diameter of the drop in trigger pin and selector switch? They both started as 7/16”. If you asking how many pins holding everything together- 3: 1) trigger pin, 2) selector switch3 ) rear plunger that locks upper and lower receivers. I don,t count 2 little screws that hold the trigger flat spring and the bolt that holds the pistol grip.

The Forgotten Weapons channel on KZfaq has a video of how this trigger functions. Look up his video on the Brazilian gun this is modeled after.

Thanks a lot

Not much of specific forearm work. However- try to hold weights w/o wraps when do back exercises, changing grips: palms up or down. And also do reverse or hammer biceps curls to focus on forearms

Based on URU, BRAZILIAN SMG.

Thanks

ABSOLUTELY, PLUMBING +HARDWARE

Спасибо . Я старался. Платформа УРУ и универсальность трубопроводных соединений позволили чистоту- мало частей.

They are 2 males and are my advisors and critics: I get louder- they get louder

@@STEINBVG 😂😂the best advisors ever

No this is just a toy, for my mechanical amusement . For protection I have real serious weapons. Thanks

У нас тоже подтягивают гайки : от штата к штату варьирует интенсивность антиконституционного террора против оружия …хотя такой пистолет легально построить во многих юрисдикциях… Народ легко строит модульное оружие- AR15, SIG, GLOCK и другие, но куча ограничений , закалебаешься регистрировать. Свободный затвор и магазин как намёк на конверсию в автомат- забудь

У вас там, распечатывают на 3д приниерах много интересных вещей !

Подписался

@@user-zg1un5tr9k Да, 3д популярны, я раздумываю об этом и сканере. Но нужно также освоить CAD...

@@user-zg1un5tr9k thanks

Thanks. I give away my ideas for free- anybody welcome to use them if capable. I do not sell plans or completed creations …I don,t walk people step by step through the basics. In other words, don,t teach people how to play piano. I hope I show how to play jazz, to improvise…to do thing on the fly

No problem. Where,s fun in buying ? It,s like getting liposuction vs working your ass off in the gym- different level of joy and accomplishment ! Thanks

Me: enjoy

Scaled for but doesn’t shoot 22

Да. Переделаю пружину вовнутрь точно как в оригинале

Thank you so much 😀

Thanks

Thank you so much

Thanks

You must email me the pictures of you and the gun to the business email address listed for my KZfaq account - see under ‘ABOUT’ . I would be eternally grateful !!!

NO, THE BRAZILIAN URU IS THE PROTOTYPE...I JUST COPIED SOME OF IT'S DESIGNS

Я очень люблю историю строения оружия и мотоциклов , первые попытки , шикарные находки начала 20 века, обаяние стимпанк. Поэтому мои поделки в этом стиле , а кроме того моя примитивная технология гармонично приводит к такой эстетике.Посмотрите мой бобер Rough’N’Raw- Грубый и Неотесанный. Я не очень люблю обсосанную аэродинамичную эстетику пластика… Спасибо за просмотр

Please, watch the video carefully and read the descriptions. Thanks

I,m not sure what you,re looking at, but the brass nut that represents the barrel ( nonfunctional) is screwed on the front of upper ( round ) receiver which houses the bolt , main spring etc. The lower receiver, square tube , houses the fire control group and mag well/release. Watch other videos on the topic, it will be clearer. Thanks

Забавно, спасибо. Следующий будет из макраме!

Спасибо но нет: ведь написано в названии, что не стреляет…

@@STEINBVG аааа жаль а то я мысленно продолжил выходящий назад затвор в приклад как на G 33 А зачем тогда это всё

@@user-fc4hx2vv6r это уже сделано в следующих эпизодах а в последствии затвор переточен на внутренние пружину и направляющую. Как должно быть. А зачем ? Посмотри все что я делаю может будет понятнее

Thanks

Thank you kindly

All the materials are bought in a hardware store except the mag. I do not sell parts, complete items or offer plans. I give away just the ideas in sufficient details for a capable person to emulate. Thanks.

Yes. Using a video and pictures of the original BRAZILIAN URU submachine gun

@@STEINBVG I'm very interested in learning

Watch all the videos and read the descriptions and comments. You might be able to learn.

@@STEINBVG Thank you very much, you will be my first teacher

WOW. THANKS

NOT FOR SALE

Thanks

Просто стукнул ручкой об стол-грязь посыпалась

Thank you! Cheers!

WE WILL NEVER KNOW, WILL WE?

Thanks

Thanks

I do not offer blue prints or sell my creations. I give away the ideas. If crafty and handy, by watching all the videos on r(entropic and reading the descriptions and perhaps comments you will have enough info to emulate this. Thanks

Thanks

Thanks, but no plans

Comprar uma provavelmente não porquê a Uru ja não é mais fabricada, mais nada te empede de ir montando uma aos poucos. Baixa a planta na internet, manda fazer as peças e vai montando em casa medmo. Eu tenho bvontade de faser isso mas o que eu quero montar é aquelas pistolas de pederneira, tipoma do piratas do caribe.

@@miguelbabotdeoliveira7975 NEVER SAW BLUE PRINTS OF 9 MM URU ON THE NET. WOULD LIKE TO SEE THEM THOUGH. THANKS

@@miguelbabotdeoliveira7975 Teve um brasileiro que fez uma pistola idêntico a berreta, em 9mm tudo com maquinário em casa

???

This is an attempt of recreation of the mechanism of the military SMG, URU, made by a talented legit Brazilian engineer. But I,m sure due to it,s simplicity it found it,s way to the streets as illegal clones.

Damn Brazilian samurai

@@STEINBVG Yes it did, and that gun fucked, basically a m3a1 but better in every aspect

@@pewpewxdx12👌( ･ㅂ･)و💰

@@luizalex.7424 I would love to have a real one. There are some in the US, but fully legit transferable full auto guns are allowed only in republican states and cost like a good car… My nonfiring toy is as close as I can get to it…and feel it. But at least I am allowed to have registered guns to shoot. Indeed semi auto at best. Thanks for your patronage

sure

@@STEINBVG I’m joking, broseph

@@brutusmagnuson315 me too

THANKS

1) неполная разборка для чистки предполагает разбор верхней коробки, затвора, боевой пружины. Все нижнее остается нетронутым. Выкручивается задняя гайка и все. 2) всего 20 частей при разборке полностью. Покажите мне оружие где меньше??? И он разбираются без инструментов. 3) Бразильский Уру с которого делался этот образец считается самым простым ПП.

I build bikes and these models without any plans, by pure inspiration. See all the videos and read the descriptions , comments. If capable you will be able to build something like that. If not- I can not help you with more than just ideas. Thanks for watching

There,s no plan or file. If capable, you have enough info in the videos…

Yes you are absolutely correct. My first video about it pays a special tribute to the original Brazilian 9 mm SMG. In my heart it takes 1t place amongst SMG due to it's insane simplicity.

Посему не делайте ничего в подарок вашему государству, как я пытаюсь не дарить моему…А за видео и поделку спасибо, я старался

No you won,t . The damn thing just a fidget ….an interactive mechanical toy. I have enough things that shoot… and don,t cause problems. Thanks for the visit

Do not understand clearly, But thanks.

There is no ST. There were SA- semiauto, A-auto, and 2 safeties -S. Now there are only 3 positions: SA, A, AND S

Ha ha. Yes. By accident in the editing. Pushed the wrong button . By the time I noticed it was too late. I was wandering if somebody would comment. Thanks . PS. Russians wear rings on the right hand by the way. I used to…

@@STEINBVG Flipped mirror would account for a right handed person holding a gun left handed but it doesn't change a right hand thread into a left hand thread or does it? I may have to screw a nut and bolt together in front of a mirror to see. I figured you just used a propane fitting you had laying around but that still would have required a left hand die to thread the back of the reciever. They do make and sell left hand taps and dies but you probably won't be buying one at a local hardware store. I have watched the Forgotten Weapons video on this sub-gun and prefer the original recoil spring design.

Not sure what it means

Thanks

I wish... perhaps in another more free universe...

Really nice piece what country are you located??

@@jaystew3396 see my channel home page, section ‘ABOUT’ top right corner

Nice build and I love your birds in the background!

@@coreturkoane5570 THANKS

AS IT SAYS IN THE TITLE, IT is based on URU , I have said it in my description of this 22 tribute. THANKS

I have one 9mm Uru used during the military government in Brazil. It’s in its original case.

@@dr.edsonhenrytakeipsiquiat3513 wow, would like to see that. That,s a marvel. Have you shot it? Is it good? Reliable? Controllable?

Я в другом ролике вам ответил. В США у меня могут быть легальные проблемы. Информации во всех видео и описаниях достаточно для рукастых

My homepage states that I do not offer blue prints or sell my creations. I share freely my ideas with likeminded individuals who, if capable, can use them and build similar projects. Watch all the clips and read the descriptions, it might be enough

Thanks for the tip. They annoy me too.

No sales of any kind. Illegal

HA. The whole production is only 1 item....Although some manufacturers pumped themselves up for clients by starting a new production with #something like 10001, as if there were 10k guns before.

TY

Thanks

I wish I could teach my kid some of my skills...or rather he was able to acquire them. Thanks

Спасибо. Посмотри другие, не менее прикольные

@@STEINBVG Хорошо бро посмотрю но только уже завтра наверное... Ну я беглым взглядом посмотрел твой канал и 7 видосов в "смотреть позже" добавил )

Да нет, дo пенсии еще рановато- я врач. Да и забот в семье хватает. Просто нужно научиться быть дисциплинированным и тогда есть время...не очень много, но есть

@@STEINBVG 🙏