Thanks for watching and commenting. Definitely way more tools than I need for a DIYer but I’ve been a tool fanatic since I was around 6 or 7 and can’t help myself.

Thanks!

Ratchets for days...........

Thanks for watching! Apparently I have a ratchet fetish or more like a tool fetish.

Some people just have too much money to throw away

@@ua7pyro591 I'd rather have and not need than need and not have.

@@van1196 let’s face it, everyone watching this video has a tool fetish!

@@ua7pyro591 his entire collection is less than 1 drawer of snap on tools. Snap On guys have a literal house worth of tools sitting In a box that is more than a nice car

Thanks for watching and commenting!

Thanks!

Thanks for watching and commenting. It is a nice box especially for the DIYer.

Thanks for watching and commenting!

Thanks for watching and commenting!

Thanks for watching and commenting!

I still have more ratchets in my main box.

Gotta love a fellow ratchet addict. Loved your video. Nice cart!

@@billkoeh Thanks!

Thanks for watching!

Thanks for watching!

Thanks!

Thanks for watching and commenting!

Thanks for watching and commenting! I think you'll be happy with the cart when you upgrade.

Thanks for watching and commenting!

Thanks for watching and commenting!

Thanks for watching and commenting!

Thanks for watching and commenting!

Thanks!

Thanks for watching and commenting! My brain doesn't function sometimes when making a video.

Thanks for watching and commenting.

Thanks for watching and commenting!

Thanks for watching!

Thanks for watching and commenting!

Thanks for watching!

Thanks for watching and commenting! If I use them then I have to clean them

Thank you and thanks for watching!

Thanks for watching!

Thanks for watching and commenting! Gotta share the space with all brands.

Thanks for watching and commenting!

Thanks for watching and commenting!

Thanks for watching and commenting!

Thanks for watching and commenting! I got the magnetic boards from Lowes.

I made the wrench organizers on my 3D printer.

@@van1196 I really like those.

@@van1196 Nicely done. 👍🏻👊🏻

I was about to ask the same question but them I searched the comments before 🤣😅🤣😅🤣 I like how you really used the empty space between wrenches and still build a steady holder 😎😎😎

Thanks for watching!

Thanks for watching and commenting! I 3D printed the ratchet holders. I think toolorganizer.com sells something similar.

Thanks for watching and commenting! I designed and 3D printed the red wrench holders. The wrench holders that the ICON stubby , Gearwrench flare nut, ICON combination reversible ratcheting, and ICON combination wrenches are US General wrench organizers cut up to fit my drawer.

Thanks for watching and commenting! I 3D printed the ratchet holders. You can order the original ones from Apexorganizers.com.

Thanks! Yes I made the wrench organizers on my 3D printer.

@@van1196 you should start selling the wrench organizers if its your design. Id definitely buy those. I'd go as far to say I'd pay upwards of 30$ for them, each.

@@CarRimRod I'll have to think about it. The ones I have are specific to the wrenches I have and not sure if they'd work for yours. What ones are you looking for?

@@van1196 oh i have a shit ton of wrenches pretty much every different style of wrench sold by snap on other than industrial wrenches and diesel sizes i have. My current organizer is just wrench rails. I have to use 3 drawers on my side box to hold them all

@@van1196 I’d have to agree. I thought the same thing when I saw how many wrenches you have in there. I Also have the same US General 6 drawer cart, and with racks like that I’d be able to fit way more

Thanks for watching the video. I used 12mm x 3mm rare earth magnets on the rails. I used a 1/2" flat top de-burring tool in my drill press to make a flat surface for the magnets to sit in. I then used Starbond adhesive with their accelerator spray to attach the magnets to the rails.

@@van1196 appreciate the details..best execution of magnets on the aluminum rails I've seen yet...been wanting to check out starbond, see them in insta all the time..looking forward to more vids.thanks

Thanks! I just dipped the handles about 6 or 7 times in Plasti Dip.

Snapon did just release a set of blue handles that look amazing, I got the pod lights in the blue but my ratchets work fine so until they make the handle swappable I got the ol black and reds

@@No_Legos the snap on handles are swapable. As long as you have a soft grip, or the hard plastic grip (NOT straight chrome), you can change those babies out for whatever color, hard handle or soft grip you want. 💯

Thanks for watching and commenting! Hopefully you get your box setup the way you like.

Thanks for watching and commenting. Yes, they are Plasti dippped. The 2 red Tekton are also Trusty Cook. To me the handles on the Trusty Cooks are too slippery. I never felt like I had a good grip on them so I Plasti dipped them and don't have that issue anymore. I like the dead blow hammers now with the extra grip. Some KZfaq channels say that the steel shot gets blocked by the handle and head being one piece and that causes bounce back. They say that the Snap-on dead blows don't have the bounce back because the head is seperate from the handle. I don't know if there's a difference or not. I don't own a Snap-on, but would like to get one someday.

Thanks for watching and commenting. I 3D printed the ratchet holders.

Thanks for watching and commenting! I modified the design of the apexorganizers ratchet dock and 3D printed my own ratchet holders. Apexorganizers.com sells them.

@@van1196Apex apparently went out of business. Bummer.

@@billk5296 That's unfortunate

Thanks for watching and commenting! I believe it's 90 days. You can purchase an extended warranty.

Thanks for watching and commenting!

Thanks for watching and commenting!

Can you send me a link of the wrench organizers? They look like foam from the video.

@@cuttthroatperformance2752 I designed the wrench organizers and 3D printed them.

@@van1196 man really? You should sell them. I'll buy

Thanks for watching and commenting! This is the box I use to work on stuff. I just clean the tools when I'm done using them. I also have another box with mostly SAE. I'm not a mechanic just a DIYer so they don't get used everyday. I just like tools.

Thanks for watching and commenting! Completely agree about having to many ratchets. I can't help myself. I see a new tool and I need to own it.

Thanks for watching and commenting!

I got the silver Craftsman magnetic plates from Lowe’s and the green rails are from Olsa tools. The Olsa rails aren’t magnetic so I modified them with neodymium magnets.

Thanks for watching and commenting! The 3 row socket organizers are made by Westling Machine and you can order from their website. I 3D printed the ratchet holders.

Thanks for watching and commenting! You're correct, they don't get used everyday. I'm not a mechanic just a DIYer and I clean them after I use them.

Thanks! I used a white paint marker, let it dry, and then used a 3M rubber disc chucked up in my drill press to remove the excess paint.

@@van1196 nice, you did a great job, did you use a stencil or anything?

@@kdtxtooldad No stencil. All of the sockets are stamped and the paint fills in the impression then I remove the excess.

Harbor Freight. I used 2 of them and cut 1 of them to fit the opening

Thanks! I made the ratchet holders on my 3D printer. They are a similar design to Apex Organizers. He sells his version on line. You can check out Midwest Tool Review's videos about them.

@@van1196 By chance do you have them uploaded to Thingiverse? or anywhere i could buy the stl?

@@ChrisTheMobileMechanic Sorry, I just make them for myself. Unfortunately I don't plan on selling the ratchet docks. I don't want to take away from the guy who came up with the original ratchet dock. You can order his from apexorganizers.com

Great setup! I love the ratchet holders, great space saver. I appreciate you linking the company selling them, I just ordered a bunch. I thought I was organized, but I’ve learned a few things here. Maybe I have room for a few more tools after all 🤣

@@billk5296 Thanks for watching and commenting!

I changed the design and 3D printed the ratchet docks. You used to be able to get the original ratchet docks from Apexorganizers.com but someone commented that the website is no longer. The socket rails on the lid are from Olsa tools and I used Starbond adhesive and their accelerator to attach rare earth magnets to the rails.

Thanks for watching and commenting! Keep trying, you'll get it how you want it eventually.

Thanks for watching and commenting!

It depends on the length of the breaker bar and the handle. I have a 36” Tekton breaker bar and the handle is about a 1/4” from hitting the lid when it’s closed.

Thanks for watching and commenting!

Thanks for watching and commenting!

Never mind. I re watched and see they are on the side. On the top bay. Very nice setup! 👍

Thanks for watching and commenting!

Thanks for watching and commenting!

Thanks!

Thanks for watching and commenting. The rails are from Olsa tools. I added magnets to them, but I believe they now offer magnetic rails

Thanks for watching and commenting!

I used a white paint marker. After the paint dried I used a rubber wheel, made for stripping the tape residue off your vehicle paint when you take off the molding, in a drill press to remove the excess paint.

@@van1196 thank you sir very nice collection, you don’t have to be a 12 hour a day 7 day a week mechanic to enjoy and have a passion for good tools

Thanks for watching and commenting! Yes, I do love the smell of Kroll, but I don't love the price.

I would really like to know

Thanks for watching and commenting! I changed the design of the Ratchet Dock made by apexorganizers.com and 3D printed them. Unfortunately I think apexorganizers.com doesn't exist anymore.

Thanks for watching and commenting! I'm not a mechanic just a DIYer.

Thanks for watching and commenting! That's usually the way it goes, you buy something and the next week something similar comes out.

thats dumb 2 spend that money on matco snap on ect get the cheap shit works fine

@@JamesBrown-db9pk totally agree with you, I was like 19 at the time and definitely dumb. 😂

Thanks for watching and commenting! It's a master tech cart. As I said in the video I'm not a mechanic just a DIYer and I like tools.

Thanks for watching and commenting!

Thanks for watching and commenting!

Thanks for watching and commenting! One is a Snap-on and the other is a Gearwrench. The handles are just several layers of Plasti Dip.

Thanks for watching and commenting!