Use of 100% and 30% Feed Control Valves in a Power Plant | How does a Thermal power plant work?

Рет қаралды 6,242

2 жыл бұрын

Join this channel to get access to perks:
/ @electricalandautomati...
Feed Water System in Thermal Power Plant & their sub-systems.
It included FST (Feed Storage Tank), BFP (Boiler Feed Pump) , HPH (High Pressure Feed Water Heaters), FRS (Feed Regulating Station) /FCS (Feed Control Station) etc. In it a basic scheme of feed water system also included.
Electrical & Automation
Use of 100% and 30% Feed Control Valves in a Power Plant |
How does a Thermal power plant work?

Пікірлер: 58

@gajendrachauhan7579 2 жыл бұрын

Well done,Sir these video enhance my knowledge regularly.

@ElectricalAndautomation_guru 2 жыл бұрын

Thank you, please subscribe to our channel and do not forget to share with others. If you already subscribe to our channel then thank you for doing so.

@vsaktharhussain 2 жыл бұрын

With fully detailed plz Tq for your very informative knowledge for sharing....

@ElectricalAndautomation_guru 2 жыл бұрын

Thanks please subscribe and share our channel

@praveentiwari8490 2 жыл бұрын

Very good

@ElectricalAndautomation_guru 2 жыл бұрын

Thanks please subscribe and share our channel

@rajendrabisht8492 2 жыл бұрын

Nice Video

@ElectricalAndautomation_guru 2 жыл бұрын

Thanks please subscribe and share our channel

@pradeeptiwari4023 9 ай бұрын

Sir Afbc boiler light up ka video banaye dcs pe

@sap6319 2 жыл бұрын

Very helpful sir💥💥👍👍

@ElectricalAndautomation_guru 2 жыл бұрын

Welcome, thanks for the appreciation please share the video with others and do not forget to subscribe to the channel

@ramansen4812 2 жыл бұрын

Sir conveyor belt me lage equipment se releted ek video banaye

@mahibubmomin4492 2 жыл бұрын

Good jod sir

@ElectricalAndautomation_guru 2 жыл бұрын

Thanks please subscribe and share our channel

@ranjitsinhparmar4145 Жыл бұрын

Drum level measurement DP type transmitter replace and install GWR level transmitter.What is different?

@ElectricalAndautomation_guru Жыл бұрын

Huge different

@mohammedirshadalam175 Жыл бұрын

Yokogawa vortex flow meter ke configuration ki jankari lenithi bhai if you can make video on that🙏

@ElectricalAndautomation_guru Жыл бұрын

Okay

@vsaktharhussain 2 жыл бұрын

Hi dear Plz can u share combustion control and it's inputs taken and formula, hope you will make the video with out fail .

@ElectricalAndautomation_guru 2 жыл бұрын

Ok, sure.

@MANOJBEHERA-cx9hk 2 жыл бұрын

Sir kese plc mein example pt ft control valve configuration karte hai

@ElectricalAndautomation_guru Жыл бұрын

Hmm

@mdshabeerahmed2247 2 жыл бұрын

Pl make a detailed video of PID settings of this control valve

@ElectricalAndautomation_guru 2 жыл бұрын

Ok, Thank you, please subscribe to our channel and do not forget to share with others. If you already subscribe to our channel then thank you for doing so.

@biswajitpradhan6186 3 ай бұрын

Amonia chliller plant upor vedio banaiye

@ElectricalAndautomation_guru Ай бұрын

@VinodKumar-ut4dg Жыл бұрын

Hello sir, I have a problem in temperature control value, it's hunting continuously, i tested all regulator, air lock relay even I checked diaphragm n arrested all leakages still hunting ...wt I want to do sir?...gain is 2, Ti is 20

@ElectricalAndautomation_guru Жыл бұрын

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.

@VinodKumar-ut4dg Жыл бұрын

@@ElectricalAndautomation_guru i am asking solution sir

@virajmistry4998 2 жыл бұрын

Calibration ka video banavo filed mai kaise karte hai .... Temp pressure level flow kaa

@ElectricalAndautomation_guru 2 жыл бұрын

Ok, I will try

@virajmistry4998 2 жыл бұрын

@@ElectricalAndautomation_guru sir running plant mai transmitter bandh ho jaye toh kya karna padta hai ?

@rakeshkumarkar3216 11 ай бұрын

Agar ham 100 percentage cv starting main kya problem hoga

@ElectricalAndautomation_guru 11 ай бұрын

Excess water

@mdazmathossain7301 2 жыл бұрын

Drowning k thorough bataye pleas

@ElectricalAndautomation_guru 2 жыл бұрын

Okay

@syed_taha_ahmed Жыл бұрын

In combine cycle these 30% and 100 % are present?

@ElectricalAndautomation_guru Жыл бұрын

@syed_taha_ahmed Жыл бұрын

@@ElectricalAndautomation_guru In Cpmbine cycle plants we have either sliding control or constant pressure control The feed water to hrsg inlet is controlled by level control valve which open or close by looking three elements. Normally at ccpp at part load the ST CV are kept wide opened but the steam pressure drops. I've one question the FWP discharge pressure at base load of machine is approx 113 bar and 110 t/hr but at part load it is around 90 bar and 106 t/hr. The discharge pressure before CV change from 113 bar to 90 bar during steam turbine part load operation. How does feed water discharge pressure is varried? From Scooptube??

@learnbyshiva725 2 жыл бұрын

Sir pls make video for all type of calculation for instrumentation

@ElectricalAndautomation_guru 2 жыл бұрын

Ok, Thanks please subscribe and share our channel

@ElectricalAndautomation_guru 2 жыл бұрын

Ok. Thanks please subscribe and share our channel

@vsaktharhussain 2 жыл бұрын

Still not cleared fully about this video..... Need some thing deep information in this 30% and 100% feed control valve

@ElectricalAndautomation_guru 2 жыл бұрын

Thanks please subscribe and share our channel

@akshaychavan6245 2 жыл бұрын

Hii Sir I'm Instrumentation Diploma Engineer Sir I have questions about Split Range Control valve how work ,& How I check 4-20mA signal in Split Range positioner

@ElectricalAndautomation_guru 2 жыл бұрын

Ok,

@akshaychavan6245 2 жыл бұрын

Thank you sir