Use Section Designer in ETABS | Shear Wall with Boundary Element | Sandip Deb | ilustraca
Рет қаралды 5,778
3 жыл бұрын#ETABS #SECTIONDESIGNER #SHEARWALL
USE SECTION DESIGNER IN ETABS | SHEAR WALL WITH BOUNDARY ELEMENT
by / ilustraca
Presenter- Sandip Deb
Join our telegram group-
t.me/ilustracacivil
Download our Mobile App Here 👇🏻
play.google.com/store/apps/de...
Advance Program in Bridge Superstructure Design (RCC and PSC) using Midas Civil and Manual Approach-
amitco.courses.store/123160?u...
Advance Program in RCC Building and Foundation System Analysis and Design (ETABS+SAFE+Manual)-
amitco.courses.store/122568?u...
@komangerim5297 Жыл бұрын
THANKS...
@NedaAsadi-sh1xq 7 ай бұрын
Good
@civilideas1925 2 жыл бұрын
👍🏻
@athiraharidas4511 2 жыл бұрын
sir, how to add composite sections ( adding steel plate to boundary element) in shear wall??
@ganeshrasankar5791 2 жыл бұрын
Sir ek baar etabs ke results se detailing kaise kar sakhte hai iska ek video
@ilustraca 2 жыл бұрын
ok, will do that
@anastaha2438 5 ай бұрын
Hi , I made boundry element design , and then when I redesign the walls by assuming (assign general reinforcement) for the wall it self the D/C ratio is logic but for the wall summary the boundary element length is increased rather than the first length - which was used as creating new section for the wall- why is that? shall the boundary element in wall summary be greater?!! after I used the first value as new section
Tarek Youssef
Рет қаралды 9 М.
AnythingAlexia
Рет қаралды 26 МЛН
Eater Straw Hat
Рет қаралды 26 МЛН
DESIGN SKILL
Рет қаралды 584
ilustraca
Рет қаралды 5 М.
ilustraca
Рет қаралды 9 М.
ilustraca
Рет қаралды 1,1 М.
Earthquake Resistant Design-Base Shear and Overturning Moment Check | ETABS | ilustraca | Sandip Deb
ilustraca
Рет қаралды 8 М.
ilustraca
Рет қаралды 24 М.
Parash Joshi - Civil Construction and Tutor
Рет қаралды 7 М.