★THIS VIDEO WAS MADE POSSIBLE BY★ Bow featherboards- Uniquely designed to reduce table saw kickback like no other featherboard I have ever used! amzn.to/430ldhv *(BOW is a small, 2-man business and a supporter of our channel. They are worth supporting!)* *My Table Saw and Bandsaw are AWSOME! Check them out at Harvey Woodworking Machinery:* www.harveywoodworking.com/ *My hand tool collection includes premium tools from Bridge City Tool Works:* bridgecitytools.com/ *Please help support us by using the link above for a quick look around!* (If you use one of these affiliate links, we may receive a small commission) - Video about setting up a band saw properly: kzfaq.info/get/bejne/qraCpaiY09qbp4E.html *Some other useful links:* -Check out our project plans: stumpynubs.com/product-category/plans/ -Instagram: instagram.com/stumpynubs/ -Twitter: twitter.com/StumpyNubs ★SOME OF MY FAVORITE INEXPENSIVE TOOLS★ - #ISOtunes Hearing Protection (Save 10%): shop.isotunes.com/stumpy -BOW Featherboards: amzn.to/430ldhv -123 Blocks: lddy.no/vpij -Mechanical Pencils: amzn.to/2PA7bwK -Lumber pencil: amzn.to/2QtwZjv -Pocket Measuring Tape: amzn.to/2kNTlI9 -Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK -Self-Centering Bits: amzn.to/2xs71UW -Steel Ruler: lddy.no/10mv7 -Center-Finding Ruler: lddy.no/10nak -Bit & Blade Cleaner: amzn.to/2TfvEOI -Narex Chisels: lddy.no/sqm3 -Mini Pull Saw: amzn.to/2UEHBz6 -Shinwa Rulers: lddy.no/zl13 (If you use one of the affiliate links above, we may receive a small commission)
@user-bt5qt9pp4xАй бұрын
I used to achieve perfect freehand cuts with my saw! even the surgeon said he had never seen such accurate cuts
@lechatbotte.Ай бұрын
Lol😂
@markgigiel2722Ай бұрын
The coroner liked mine.
@brodrick3164Ай бұрын
How good was the surgeon when stitching you back up. Were his stitch lines as straight? You did say that you used to achieve perfect freehand cuts.
@LetzgoBrandanАй бұрын
Yes, we often free hand/scribe base on the table saw, no riving knife and fence a the way to the right. Prior to turning on the saw it is necessary to yell 8 ball corner pocket!
@JAMESMT-mm6zlАй бұрын
😂🤣
@johnford7847Ай бұрын
I've used and read about bandsaws for 50 years and never before heard about this. Thank you very much.
@Michdave700Ай бұрын
Wow! What a simple and valuable technique. However, I am upset you didn’t do this video about 12 years ago!
@johnopfer8065Ай бұрын
My dad taught me this when I was like 12. Thanks for demonstrating this to those whose dad was not a woodworker.
@brenth308921 күн бұрын
I bought one of the Bows Feather Boards , to see what the hype was about. I ended up buying a set for my router table. THEY. ARE. AWESOME!! I really look forward to watching your videos every week. They are very helpful for improving my woodworking skills.
@RobertKarlBerta23 күн бұрын
I am 77 years old. When I took a high school summer school woodworking class for fun in the early 1960s.... the instructor showed us how to do that. He also talked about NOT cutting on a marked line but on the side of a line.... just barely missing that line. This was both on band saw, table saw, miter saws.... and also hand saws. I assumed everyone did it that way.... guess not!
@petersuhmann7742Ай бұрын
I learned something today. I been avoiding my band saw due to the lack of precision. Thank you
@fuzzywunАй бұрын
As one who is constantly frustrated by my bandsaw - I'm off to try this......
@schechneraАй бұрын
I've watched SO many videos on bandsaw techniques but have never seen this before. This is great. Thanks, James!
@thomlipiczky9021Ай бұрын
Steering with the back of the blade! Yeah, I saw Tom McLaughlin (Epic Woodworking) try to explain how to do this, but your video was very clear.Thanks.
@johnlynnbeckАй бұрын
What the...? How did I not know this already?? Thank you. Can't wait to try this out!
@thp3free71Ай бұрын
Thanks for sharing this tip. As a veteran bandsawer cutting in aluminium, bronze, steel, as well as all kinds of wood over the past 40 years, I've been using this technique as long as I can remember. One caveat, if your cut strays from your line then so does your guide, adjust accordingly. This guide from the blade back side is especially helpful with large heavy awkward pieces that resist smooth movement along the table.
@cooperken11Ай бұрын
Perfectly described once again, I’ve done it for years and you are spot on again as usual. Well done.
@trplankowner3323Ай бұрын
Great tips, about both the bandsaw technique and the feather board!
@twcmakerАй бұрын
I use this method and have been for years. I cut to the line. On a recent project, I then went over the edge of the wood with my Spokeshave and maybe only 4 passes and it was done. No sanding to the line, and then no sanding at all on the edge of the board, as it was ready to accept the first coat of Oil. Great video 👍
@chriskennard5920Ай бұрын
Brilliant, all should know this. This is the way I use my bandsaw too
@jackspeer2127Ай бұрын
what a great tip. thanks. I have always had a hard time with my bandsaw. like you I cut off the line then sand. now I' gonna practice this trick and do much better.
@tylerjohncampbell3846Ай бұрын
You know I’ve followed your channel off and on but this vid is what made me hit the sub button. Really helpful thank you so much for posting it.
@woodturner1954Ай бұрын
Been doing this for a many years, dad taught me cause he hated table saws and we only had a one car garage and worked outside most of the time. Short of large sheet goods I usually use my 16" Laguna for anything but large cross cuts.
@wdtaut5650Ай бұрын
Great technique, Stump. Thanks for the tutorial. As you said, it will take some practice, as all precision sawing does.
@marcboardman118729 күн бұрын
You are awesome! Thank you James. I have found your tips, tool evaluations, and instruction consistently reliable. Two years ago you steered me away from a bad dust collection system to the Clear Vue with 6” ducting. Works great, a versatile system with blast gates positioned near the start of each 45 degree branch. My system is now the envy of several woodworker friends. 👍🏻
@joellaferriere8130Ай бұрын
This is the best close up I have seen for this technique . Excellent
@groxxАй бұрын
Makes sense. And touching the blade on the line's dude also prevents the blade from drifting towards the line, because it's supported
@sgsaxАй бұрын
I've heard people talk about this, but never seen a proper demonstration until now. I need to do some practicing on this now. Thanks for sharing!
@Antony_blrАй бұрын
This is gold. Keep up the good work.
@garyhome7101Ай бұрын
I learned this from Tom Mclaughlin awhile back. Took a minute to learn, and a bit of practice, but it works quite well!
@jerryloughney4757Ай бұрын
Fascinating!!! I assume it gets easier with practice. And I like your first point about it being easier with wider blades. I was going to ask about that. Thanks for the great tip. I’ll try it.
@jeffreyoneill6439Ай бұрын
Very bloody clever!
@ardeetАй бұрын
To be perfectly frank it took me till 2 minutes in before I realised you weren’t talking about cutting with the back of the blade. That’s on me as a noob (and yes I did have a bit a of laugh at myself). Thanks once again for useable information.
@caroleast9636Ай бұрын
You’re not alone in that👍
@MacProwler1Ай бұрын
I want to thank you so much for all the updates and information that you have provided to a newbie in woodworking!
@_P0tat07_Ай бұрын
Those nickel plated saws look amazing and that feather board is super intriguing. Never seen anyone support their body weight like that
@earljtharpАй бұрын
I’ve head this before but didn’t quite understand it. Your explanation is much better. Now I understand it and it works for me now. Thanks !
@clemmcguinness1087Ай бұрын
New technique! Thank you
@terrmasoАй бұрын
So simple, yet so effective. Thank you for sharing. I will definitely be using this in the future.
@egbluesuede1220Ай бұрын
never seen this technique before, but I'm often amazed at how good some people are at cutting straight or right up to a line. (Looking at you Andy Klein) I'll have to watch them and see if they are doing this too. I'll definitely give this a shot, as I stay way off the line and make more work for myself. BTW - looking forward to seeing that new Harvey.
@gillgetter3004Ай бұрын
Was taught this technique years ago👍
@garymiller5937Ай бұрын
Thank you for the tip. I don't own a band saw but have access to one. I'll try this next time. 😊😊❤❤
@MCsCreationsАй бұрын
Thanks a bunch for the tip, James! 😊 Stay safe there with your family! 🖖😊
@johnnyb95678Ай бұрын
What a great technique, thank you for sharing.
@ManuFortisАй бұрын
So, today I learned that my first time using a band saw was beginners luck I guess. I basically did exactly what you explained, by default. This was like... 20 years ago now, but I remember seeing the cutout part being wider than the blade was, and figured I should only lightly adjust the work piece to keep on the line. Ended up with the nicest cuts the teacher had seen in a long time, and was asked to help others do their cuts afterwards. Again, I had never used a band saw before. Other saws, yes, but not a band saw.
@danielhanawalt4998Ай бұрын
That makes sense. I don't have a band saw yet but I'll keep this in mind when I get one.
@campriole5410Ай бұрын
Awesome info.I always learn something from you videos. Thank you
@joz_tecАй бұрын
Wow! Very interesting technique. Makes me want to try it tomorrow. I'll remember this idea and give it a try next time I'm using my bandsaw. Thank you.
@pirobot668betaАй бұрын
I've used this technique in curves, never thought it'd work on the straight line cut.
@slingerssecretlaboratoryАй бұрын
Wow, amazing results. Thanks this video.
@Go4CorvetteАй бұрын
Great info and very useful. Thanks for the video.
@TheOldBlackCrowАй бұрын
Hey, I don't freak out when I sit a cold beverage on my bandsaw table... I just wait a few months and sand down the rust! Easy! 😂
@richardbryant5773Ай бұрын
Another good lesson thanks
@erickdanielsson6710Ай бұрын
Thanks James, Timely tip..... Will try in the AM...
@francescozani9488Ай бұрын
I've tuned my cheap Record power by swpping the upper tire for a cork one, I've hand rectified to be perectly round and slightly barrel shaped. I's a blast!
@KeithCooper-AlbuquerqueАй бұрын
Thanks for another useful video!
@msmith3537Ай бұрын
I did not know this technique and will give it a try. Thanks!
@watermain48Ай бұрын
Great video. Thanks James.
@MaddMaxxWoodWorksАй бұрын
Thank you for this awesome tip
@andygrayson7485Ай бұрын
this is a great tip, totally makes sense ✌
@olddawgdreaming5715Ай бұрын
Excellent information James, thanks for sharing, stay safe around there. Fred.
@rodpotts2666Ай бұрын
great tip. thanks Nubs.
@SebastopolmarkАй бұрын
Thank you Mr Nubs, I will give it a try and try and try! !! !!!
@MrStrizverАй бұрын
Thank you, once again, for the invaluable education!
@alfred2011Ай бұрын
Great vid! Michael Fortune wrote about this technique in Fine Woodworking issue #199, July/Aug 2008 😀
@va3ngcАй бұрын
I will have to try this.
@BobHerresАй бұрын
💗Absolutely amazing! Thank you so much. You always provide great, concise content. I can't wait to try this trick!
@kiwdwksАй бұрын
Awesome...thank you!
@tadaaaa952Ай бұрын
Brilliant!
@jimrosson6702Ай бұрын
What a great tip Thanks for sharing going to have to try this.
@RoseKindred29 күн бұрын
This is how I learned to do it way back in "Tech Class," basically woodshop.
@larryg.4398Ай бұрын
Well now you did it ! I can’t claim to be a know it all anymore. Thanks for your channel. I’m a grumpy old man and have learned a lot from you 👍
@jvmiller1995Ай бұрын
Yep he got me on that one too. I built my mom her nd my first jewelry box at age 8. Maybe a little help from dad. LOL That was 40 plus years ago. I grew up in a woodshop have my own tools now and fixing to start learning the grandson in a few years. I have watched every New Yankee workshop, this old house and countless other.. plus a shit ton of youtube videos that should not be allowed to air anyplace. Anyway my point is this is a new one to me too, and I am hoping a game changer..... I got a couple great cedar logs just begging to become a bandsaw box
@saltwaterinmyveinsАй бұрын
Thanks!
@EK--ry3lrАй бұрын
Really neat idea
@agconsАй бұрын
This makes sense to me: I get smooth edges and very accurate cuts on fabric not by watching where the shears are actually cutting, but by watching the cutting line just ahead of the points. Something similar has to be going on with respect to human hand-eye co-ordination.
@socketmanАй бұрын
Still on this quest to be able to cut with any accuracy. I've got a Jet JWBS-14SFX and it wanders like an intact stray. I pretty much only use it for very rough work, work that doesn't need to be remotely straight, or cuts that are very very short. Thanks for the tips...
@im4dabirdsАй бұрын
thanks
@donaldfrederick1557Ай бұрын
Interesting plane on your table
@goodtimeclubАй бұрын
James would you mind travelling back in time to release this video last week, BEFORE I cut all the templates for my Veritas Kitchissippi chairs?
@user-go5ym2oe6pАй бұрын
wow now that's clever! thanks
@LuciFeric137Ай бұрын
Gotta try this.
@uponeric3626 күн бұрын
About cutting boards: what would you use for regular maintenance? Something that really confused me is that pretty much any drying oil will take at least a week to cure (? heard lots of conflicting info on this curing time matter) which is a long time to have your cutting board out of service! If you have a food safe drying oil like hemp seed or walnut, does it matter if you use it for food prep tasks during that curing time? Like if I put up the cutting board for the night at like 10 pm after a wash from dinner, sanded it, put say hemp seed oil on it, and let it dry for until the morning so like 9 am, is that 8~12 hour period enough for it dry and not immediately come off from a light rinse? Will it keep curing through the week even during use? I haven't seen hemp oil talked much about but it seems like a perfectly valid wood finish. For that matter, is there even a difference in pure hemp seed oil/walnut oil advertised for food and for wood? Researched a ton but couldn't find answers for these things.
@kenerickson4923Ай бұрын
I'll try that. Good tip.
@oafkadАй бұрын
I felt like an idiot for a bit. I thought you meant you were cutting from the backside of the blade (opposite the teeth) and was like "Holy cow...you can do that?"
@OtherTheDaveАй бұрын
Same 😂
@jamesdilger8678Ай бұрын
Also guilty of that thought😂
@braddofnerАй бұрын
That is precisely the reason I clicked in. The only wood I have ever worked with in making fires. Im no carpenter, but this idea intrigued me... I was disappointed but still enjoyed the video. Now feel like I can use a band saw better than most, having hardly ever touched one myself.
@bencorley8687Ай бұрын
Mind. Blown.
@RJSDZNSАй бұрын
First of all, thank you I will try this next time e I use my bandsaw. Second, you look like you're losing weight, if you're doing it on purpose, good job my man! I lost 50 lbs 3 years ago and have kept it off. Great content!
@GarryAndrews_Ай бұрын
Can I say, you’re looking really good bud
@eugenetaljaard7568Ай бұрын
I’ve learned something.
@edwardmclaughlin7935Ай бұрын
This is Premier League, nuts and bolts advice. Brilliant.
@richardblair919Ай бұрын
Yep, a fundamental not widely known. Thanks
@marqpsmythe228Ай бұрын
Wow, just wow ❤
@makinnewcounts6676Ай бұрын
Love thls guy so humble, he is the Joe Rogan of woodworking
@lennytheleopardАй бұрын
Awesome! Thanks
@jeremymmrobinsonАй бұрын
U R da man!
@TaylerMadeАй бұрын
i guess this is the difference between being properly trained as a furniture maker to use a tool and using youtube to learn. apart from a few sites such as this, most youtuber video makers haven't got a clue. they just repeat the same old mistakes and claim its the right way.
@jamesjastrzebski1536Ай бұрын
Makes me wonder if putting a thin "fin" behind the blade to act as a fence would help even more.
@contessa.adellaАй бұрын
I did use the back of the blade…but it took ages to wear through the wood.
@aurtisanminer2827Ай бұрын
Like steering a snowboard!
@WW-jc7diАй бұрын
I hope that you will acknowledge Tom McLaughlin @ Epic Woodworking who recently published this very topic on KZfaq.
@StumpyNubsАй бұрын
Not sure if I've seen his video. Who did he acknowledge for teaching him?
@WW-jc7diАй бұрын
@@StumpyNubs Good question. I re-watched the video (episode #208). He does not acknowledge anyone. You each have a good video on the topic.
@FFT-J25 күн бұрын
Hey Stumpy, been watching your videos for a few years now and just wanted to say youre looking good. Looks like you lost some weight?
@shykitten55Ай бұрын
That feather device looks great! Minor thing, I'd call it the DEPTH of the blade, not with WIDTH. To me the width is the distance left - right. Depth is front to back. But all good. Good idea.
@StumpyNubsАй бұрын
Maybe that's how you understand the words. But it is hardly a universal rule. What you call "width" (left to right) in this case I would call thickness.
@shykitten55Ай бұрын
@@StumpyNubs 3:52. I'm using a 3/4 inch wide blade. That is front to back distance - yes? But sorry, maybe I am being pedantic. I just wanted to be sure I understood what you meant.
@MemphisCorollaSАй бұрын
I must’ve missed the video when the Harvey workbench replaced the Sjoberg
@ToogracedАй бұрын
I really like the beard. Short is sweet. Don't go too big and fluffy.