One of the best tutorials on setting up a repeater/extender. I set up an old wifi router in the living room to extend the signal from the main wifi router in the basement at the other end of the house. I wasn't able to connect from upstairs before and now I get full signal bars. Thanks.

Been watching almost every other tutorial. Only yours works. Key is to enable WDS bridging on the root router. Thanks a million!

WOW, you explained it better than any other router tutorials on UTube. Thanks bro..

Watched tons of videos like this. I came here just because "(No cables required)" lol. Thanks bro, actually helped

Thank you, brother. I wish I'd found this one first. I've watched 20 videos on how to do this with no luck , until I found yours, this is the ONLY video I needed to watch.

Perfect tutorial, I can give my old router another life.

Maybe I'm easily pleased but I LOVED how your music dropped at the exact same moment the IP address changed and reconnected. Genius editing.

Thank you man its the only tutorial that actually helped me. I've had some problems when i moved to main router part (it had completely different ui and required manually writing mac address) but finally i managed to do this.

When you realise you still need the power cable

This is exactly what I was looking for. Thank you for the video.

Can use use secondary router as repeater/extender even without enabling WDS in primary router. Only thing to remeber is to avoid ip conflict. Just change secondary router's ip address. No need of WDS enabling in primary. 1) Reset secondary router 2) Change ip address of secondary router. 3) Enable WDS bridging in secondary router and connect to primary router either by scanning or by survey option. Provide primary router's password. Select Channel as Auto or provide same channel for secondary as you seen in scan/survey list of primary connection. Change SSID of secondary according to your wish (say "wifi extender") if needed. 4) Go to DHCP and disable 5) Reboot. 6) You will be able to see wifi extender SSID. 7) Connect it and enjoy the same internet as in primary router

thank you, this helped me figure out how to set up a repeater with an existing home router

What is the speed of your main wifi and what is the speed coming in the router which you are using as repeater, is there is huge difference or only minor losses??

Damn thanks bro, work with my Tenda N300 4G router and this video was 3 years ago

this made my day a whole lot better

You described complete procedure... By your method connected successfully... Thanks... 👌👏

dislikes are from the people with old routers with no WDS

Instructions not clear. The title says no cables required, so I'm not using the power cable and the router won't turn on.

bro two question 1. speed second router ma ali slow huncha ki same? 2. can I use LAN with second router for stable ping? and happy to see a nepali creator :D

what to do if my router doesnt have internet connection?

wow so on point!! this helped me, usually wifi wasn't able to reach my father's room but now it's working! Also, I see Premier league on your computer. Which is your fav team?

Bro can you help me please.. my second router settings are completed.. but I am not able to find WDS BRIDGING on my main router.. Main router Is TP link WR820N.. please suggest

If you stuck, make sure the broadcast channels are the same!

in wireless basic settings i can only see the AP wireless access point not WDS bridge mode my wifi is leoxsys (LEO-150N-AD)

Hey bro. This is amazing. I just wanna ask: How can I connect my Tenda router as an extender to be connected to my main router which is Tenda also in wireless connection? Is the process the same with your tutorial?

the last digit of the IP address of the secondary router cannot be "anything you like" because there's a limit of up to 254 only.

Thankew for explaining so well.....it worked😊👍

Note : Depending on your location, with this method there will be 30-40% speed loss in the second router. If you want the second router to receive full speed, you must use a cable. Here is the video to do that: kzfaq.info/get/bejne/Y9qmnJN02KqwdKM.html

Can you still access the admin panel of the 2nd router after having changed the IP address and done all the reboots on both? Mine keeps saying can’t connect or took too long to connect.

After resetting the second router my WLAN light is not coming on the second router. What to do

Man I Dont Know How To Thank You,THANK YOU SOOO SOOO MUCH,LOVE FROM INDIA😊😊

Very well explained yours is the best

hello bro! can i use my B315s 936 as wifi extender wirelessly?

It's interesting to do wireless repeaters

All asking, will this method make the speed slower? Yes! it will, you cannot do anything to increase the speed. If you are a PS4 player, repeater will have NAT type 3 connection.

How come my tp link routers dont have the enabling wds bridging option :(

Is this applicable even if your router have NO WAN?

You should have a web page or maybe a blog entry for this my friend! :) But the video itself is already excellent! Thanks!!!!

Hi guys , i have not enable wds bridge mode first router still i can use internet in second router

worth every second ---MUST WATCH

Sure would like to know how you logged into router being connected with no internet..

Can I connect to the 2 wifi modems?? And use internet wireless??

thanks sir you gave me a lot of knowladge

Will it amplify a poor signal to excellent? Without wire pls reply

I've a Genexis platinum 4410 which is connected to Optical fibre. For internet I connect to my Genexis WIFI. So what I need is receive this WIFI in my Netgear D500 router and extend the WIFI. I tried following these steps but I don't have a WDS setting in the Genexis. Please help me.

I couldn't find a single video where anyone is using any other router instead of tp link as wifi repeater/extender. Koi bhi tp link ke alawa koi dusra router use hi nahi kar raha hai.. kya bakwas hai.

I don’t find WDS option in my first model alphion

i love my handphone's hotspot. how can i use my tenda 4g680 as a wifi repeater for my handphone's hotspot because i find it tedious to remove sim card from phone to Tenda every time?

Ditch the annoying music if you want to make more effective tutorials

I dont have any of this in my settings for tp-link. sucks. i just gotta get a really long ethernet cable and figure out how to get that through the wall so I can shut my door.

Well done, that was useful

That music made want to stab an ice pick in my ears. My router is nothing like this didn't work.

I have a bridge connection for my second router but there's no option to scan

Thanks for the amazing tutorial, just have one question: Would I need to reconnect the second router if the power goes off or would it reconnect to the main router automatically?

The idea is good, but you only have so much bandwidth. So yes it will possibly reach further, but not boost you’re speed nor anything else.

This video is only for Tenda routers or the procedure is same for all brand routers? I've Binatone as secondary and Dlink as primary.

Also mention that every wifi router does not have this feature

Hello! On my second router(Belkin), there's no option of 'WDS bridge'. So is there any other way that I can connect it wirelessly?

mine doesn't give me the advanced option in the beginning?

couldnt find WDS bridge option in dlink router....any suggestion??

I have an old Belkin N150. Can it be used as a repeater as i am not able to see the bridge option in it. Also my primary router is Jiofiber. Any step/recommendations that i can follow is much welcome

Is this possible with g1100 Verizon?

Lmao, you exposed your ip adress😂👍

how can i access the ip address of the 2nd router if it doenst have an internet

All of the speech has been lost due to the music being far to loud and being distracting.

Hi SL7 Tech, My question is can we setup password for the second router as it seems to be open network and I think other can join too. Also will it decrease the speed of the internet too?

Due to no internet in 2nd router, I can't open setting page in computer. What to do ?

I HAVE ARCHER C 5 SUPPLIED BY MY ISP. ON THE TPLINK LOGIN PAGE ,I CAN NOT LOGIN FOR WANT OF CORRECT CREDENTIALS. RESET TO FACTORY SETIING BY PRESSING THE BUTTON WITH A SHARP EDGED MATTER, ON THE BACK SIDE OF ROUTER ,DOES NOT WORK, . THIS ROUTER IS SINCE REPLACED WITH A DUAL ROUTER.NOW I WANT TO USE ARCHER C5 (WHICH IS IDLE NOW) AS RANGE EXTENDER. Any suggestion pls

At 2:41 my main router network is not visible. What should I do ? The Main router is of Huawei

I have TPlink adsl modem connected with jio fiber modem with lan cable, can i use adsl modem as repeater without lan connection.

I’m still having issues connecting my second router because it is refusing to connect to my network at all, I have tried direct lining it to my internet cable, running it from a second computer in the room I will be using as an access point and running an Ethernet cable from my main router into the lan port of the second router and that is the only way I can get it to have internet which doesn’t help me and even then I can’t access the router settings page on it with any up address I have typed in

How do i connect to the router that I just reset when it has no internet?

Password to access wifi is not set up in 2nd router - why?

So is it possible to have my router inside house to give internet for a modem in my garage that i could use ethernet cables on?

Hello. Mero wifi ma wireless extender jodiyeko xa ani main router ra extender ma maile different name ra password haleko xu and i need to block devices tara block garda main router wala name used vako devices matra block hunxa extender ko name used devices haru block hudaina k garna sakiyela. ?

My primary router is tenda and it doesnt have bridge,/wds enabling option or I might not found this, help me out bruh

Do I have to do the main router, or can I bypass that somehow?

Does wireless bridge mode do the same thing

Problem is my 2nd router doesn't have internet access only the main router

Will this make my internet slower? I really like to try this out

The old router would not show up even if I manually put the SSID in the hidden network. Sad.

So after apply evrything the main router will keep working normally or not

Bro at 2:40 there is no scan option in my window

I have dual band router as my main router will it be any problem for me to get the same speed bcz my second router is the same tp link router what is shown in the video

Nice info.thank you sir

Whats with the yellow dot on your mouse pointer? Its a bit annoying

Hey bro. This Tip is working but how to do it without a Computer?. But did not try this before because i dont have any computer.

After scanning it’s not showing my main router do I have to configure some setting in main router before setting 2nd router? (I have jio fiber as main router and using tenda Asdl d151 as extender )

I am currently using an LTE Huawei Router E5573s_606. Is it at all possible to extend its range through a similar method? I do have a Tenda Router available? I do not see WDS Bridge on the router's page though.

Can I do this with my phone instead of a laptop?

I'm using a dlink router and I can't find wds bridge anywhere

jio fiber mera existing modem hai bt mujhe wds option mil nhi rha ...kya krun

Vai main router ka speed kitna aa raha tha or repeater use karne ke baad speed kitna aa raha ha baatao...

Bro can we use it at the distance between 1 house?

Hello thank you for this video I am facing one issue My main router is Tenda (AC10) and secondary router is TP link (WR841N) I done everything you said in your video for the second router and its working fine without changing anything in first router. But the problem is when I turn off my router and turn it on again next day.. it's not connect and give obtaining IP address error So I have to reset and put every setting again and then it will work. do you have any solution for this problem thanks

after adding 1st router's MAC address, SSID and selecting same channel as 1st router, the 2nd router reboots itself but I cannot reconnect to it. Can you help? I tried logging in using 2nd router's ip address after it rebooted but it doesn't connect.

Sir I am planning to use the old router as repeater and I have doubt can I connect my old router i.e repeater throught ethernet to android tv and simultaneously use as wifi to other phones !??? I hope you got the point

Can not find wds vridging in main router excitel fibre router

This is the only tutorial that works.

With this setting can we use internet throught LAN in 2nd router ?