Using marking spray to make custom tumblers

Рет қаралды 21,744

2 жыл бұрын

Making an order of plain stainless tumblers into custom tumblers. I use marking spray and my XTool D1 to get great results. To set the "return to" location, watch this video- • Setting the "return to...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
XTool Website
www.xtool.com/?ref=TheClackSh...
Amazon links
D1 bundle that I have on Amazon:
amzn.to/3sJRPMC
Marking spray
amzn.to/38xG2tP
Tumblers
amzn.to/3Nn2BQQ
Dewalt Sander
amzn.to/3wtDgix
400 grit sand paper
amzn.to/3FWiStv
Finishing paper- assorted including 1000
amzn.to/3lqFQzg

Пікірлер: 96

@markbigham6653 2 жыл бұрын

That is what I call "keeping it simple". Well done. Now I know I can do tumblers.

@TheClackShack 2 жыл бұрын

The fewer steps, the less chance of a mistake.

@millionmilerclub Жыл бұрын

Cool I’m doing my stainless ones now

@TheClackShack Жыл бұрын

Nice

@pasadenapaul 2 жыл бұрын

Another killer video!!!!

@TheClackShack 2 жыл бұрын

Thanks

@Gnecro Жыл бұрын

Awesome info! Subscribed!

@TheClackShack Жыл бұрын

Thanks

@terrybrum9319 2 жыл бұрын

Good job! Lucky you live in the US Cermark spray at Amazon in Canada is 73 dollars for 2oz can. Love your videos

@TheClackShack 2 жыл бұрын

Wow, I may need to stock up. That is crazy. Thanks..

@joepiper871 2 жыл бұрын

I've watched this a few times now. I'm curious about the vacuum table. I'd love to make something like this work instead of a full enclosure. Is it effective for deep burn engraving and cutting for clearing vapor/smoke?

@TheClackShack 2 жыл бұрын

Its all I use, I do not have scientific equipment to test the air but I can work in the shop with the doors closed and not be sitting in a cloud. I wouldn't mind the blower being larger and have plans to upgrade that part.

@TheClackShack 2 жыл бұрын

Most 5 gallon shop vac are around 100CFM max, I plan to upgrade to a 200 CFM or more fan

@pewpewpewengraving Жыл бұрын

I'm having problems with the image stretching about 2x the size from side to side. Using the Xtool D1 Pro 20 W with the new chuck rotary. Using Lightburn. The diameter is set correctly in Lightburn. Any suggestions? Thanks again for your videos and advice. I'm from the Gadsden, AL area but did see your display at Peach Park the other day. BTW your jigs work great!!!!!

@TheClackShack Жыл бұрын

My knowledge of the RA2 is very limited to just what I have learned doing research, I don’t currently have one. Sounds to me that the step measurement needs to be increased. Make sure the settings for the steps is set correctly. Thanks… the display is probably empty. I haven’t gotten a call to refill it lately

@davidsohlstrom6977 2 жыл бұрын

Good vid. What would be your thoughts on using a glass bead blaster to take off OOPs. Dave

@TheClackShack 2 жыл бұрын

That would probably work, a sand blaster or bead blaster would also make for a cool finish. I happen to have a sand blaster….

@love2travel609 2 жыл бұрын

Enjoy your videos! Saw your other tumbler video and you used a red tumbler. Do you have a stainless tumbler without the paint? I would like to see to compare. Should look fine, right?

@TheClackShack 2 жыл бұрын

I don’t do them without marking spray. It will turn the surface a grey color but it is kinda hard to see. I can maybe do one in the future.

@dougbell1676 Жыл бұрын

Those birds are better than watchdogs!

@TheClackShack Жыл бұрын

Yes, they are. Thanks for watching..

@jimc31 Жыл бұрын

How do you level your tumblers? Seems to be my biggest issue. I have your jig (works great)and I use the hassle 20oz tumblers but have issues keeping them level.

@TheClackShack Жыл бұрын

I use spacers to level the rotary and a weight inside. I have more videos explaining. keyword tumbler.

@mrsdizi1234 Жыл бұрын

Thank you so much, I went to your affiliate Amazon store. it shows that the tumblers already have the powder coating, does that apply to the silver cups as well? and do I still need to spray again? on top of the powder coat. thank you.

@TheClackShack Жыл бұрын

No, coated tumblers are basically stripped of their coating revealing the metal. Only plain stainless requires marking spray. If you want black on coated tumblers, that would be a process.

@joepiper871 2 жыл бұрын

good stuff. algorithm banged.

@TheClackShack 2 жыл бұрын

Glad you think so, not sure what you mean by algorithm banged..

@joepiper871 2 жыл бұрын

People leaving comments increases your discoverability due to YT algorithm and gets you more monetization opportunities.

@brianpacchetti5028 2 жыл бұрын

Have you tried Laser Engraving a multi tool like Leatherman using your marking spray? I am going to try myself if Amazon order ever arrives. - No 2 day delivery in my part of Oregon.

@TheClackShack 2 жыл бұрын

I have done pocket knives, cooking utensils and large knives. As long as it is good stainless steel, it seems to work great.

@richardsonphotography1352 Жыл бұрын

Can you do different colors of engrave with the plan silver. I am hoping to get the machine in Nov

@TheClackShack Жыл бұрын

If you are referring to stainless, it will slightly mark without spray but requires spray to leave the darker marks currently the only sprays on the market are black that I am aware of.

@reverendbebop8629 6 ай бұрын

I’ve been considering trying the ceracoat but it’s quite expensive. How does it compare to how some people are using acrylic or cold galvanizing compound?

@TheClackShack 6 ай бұрын

No, I started using cermark and the results have been good for me. Never used the other approaches

@jackking8026 Жыл бұрын

I have an Ortur LM2 15W. I’m burning at 100/100 and it is slow. What do ya think about speeding it up?

@TheClackShack Жыл бұрын

I am not familiar with that particular machine. I suggest a test grid to be sure. If you plan on doing stainless air, it would be worth it. You can always sand it down and recycle.

@johncloete9000 2 жыл бұрын

Guinee Fowls - Wow

@TheClackShack 2 жыл бұрын

They follow me around and come into the shop to eat cat food.

@rigopulido4897 2 жыл бұрын

Hello I have a question do you have to change the ciconferense and diameter for each cup that are different sizes?

@TheClackShack 2 жыл бұрын

The basic rotary has range settings on each of the width adjustments. You have to use the corresponding setting on the physical machine.

@rigopulido4897 2 жыл бұрын

@@TheClackShack sorry to bother you, I'm new to the laser, yes I have the xtool d1 10w, and the new rotary the chuck's and I was checking on it and I see the circumference and diameter if they are different sides I have to change that

@TheClackShack 2 жыл бұрын

@@rigopulido4897 , you need to move the bar to the setting for that size. There should be indicators printed on the rotary

@CoCosMonkeyBusiness 7 ай бұрын

Curious why you are not using lightburn for this process? I ask bc I have the same setup as you and lightburn gave me inconsistent results, I switched back to creative space and haven’t had any issues.

@TheClackShack 7 ай бұрын

This was back in the laser box basic days. Before I had lightburn figured out, basic was just easy

@steveday805 Жыл бұрын

I have really been struggling with the darkness on my stainless tumblers. I opted to use black laser metal spray from brilliance. I have ordered the Cermark thinking maybe that is the issue. I have played with power and speed settings. In order to get a nice dark image it takes 6-8 hours for a 3”x2” image. Thoughts?

@TheClackShack Жыл бұрын

8 hours? I do these in 15 minutes, what power and how are you doing them?

@TheClackShack Жыл бұрын

2 coats of cermark, 70 mm/s at 100% only 1 pass and you will be done in 15 minutes with a 10 watt. I have done lots of them, many in batches of 20 or more.

@steveday805 Жыл бұрын

I’ve used 100 power 70mm and it is very faint. Dropped to 50mm a little darker. 20mm better but still 152 minutes. Right now it’s 306 minutes 100 power 5mm. (240 dpi)

@TheClackShack Жыл бұрын

@@steveday805that is with using marking spray? If so you need cermark. Expensive but it works

@steveday805 Жыл бұрын

@@TheClackShack As mentioned, I have ordered the CerMark. The Brilliance laser marking dries as a white powder makes a mess of my rotary. They must not work the same.

@1bads5 6 ай бұрын

Its hard to tell in the video, but how dark did the black come out? Is there a way to make it very black?

@TheClackShack 6 ай бұрын

It is black, I use cermark

@chucklenz9011 Жыл бұрын

U could add a town name to the side within a star zooming to the location within the state.

@TheClackShack Жыл бұрын

These were made for a statewide organization. I have done that on others

@edmelzark1069 Жыл бұрын

How did you set it up to keep the map in tact while you washed the marking off. Ed

@TheClackShack Жыл бұрын

Not sure I am follwing, the burn includes the map and text. Cermark washes off with water if it isn,t part of the burn.

@edmelzark1069 Жыл бұрын

@@TheClackShack So that would be treated as a fill , correct?

@TheClackShack Жыл бұрын

@@edmelzark1069 yes, The text will retract from the burned area

@lctrindade 2 жыл бұрын

How much do you charge if i needed to get some tumblers engraved with a college logo?

@TheClackShack 2 жыл бұрын

I charge $15 per engrave plus cost of tumbler in my area. I only do business logos or custom graphics provided by the customer. I do not provide copyrighted content.

@tko6196 Жыл бұрын

Do you run air assist with your tumbles normally.

@TheClackShack Жыл бұрын

Yes, just enough to keep the lens clean

@kukasally 9 ай бұрын

Does the counterweight scratch the inside of the tumbler?

@TheClackShack 9 ай бұрын

No, it rolls

@rebelmarshall3632 Жыл бұрын

How did you make the rotary jig?

@TheClackShack Жыл бұрын

Lots of trial and error, I sell it on etsy,

@RanfyFPS 8 ай бұрын

Do you just buy normal tumblers? Or do they have a coating on them? I purchased a marking spray and it didn’t work, the company told me it didn’t work because my stainless steel tumblers have a “coating” on them?

@TheClackShack 8 ай бұрын

I use marking spray, should be in the video.

@RanfyFPS 8 ай бұрын

@@TheClackShack it was.. I’m just dumb and jumped the gun and asked before finishing the video ha. I also now know what to do with my bad cups I’ve messed up. Great video! Thank you!

@JoeGalanteTribute 2 жыл бұрын

Have you ever tried etching the tumblers with color. Basically the same tumblers that your link goes to on Amazon, but they are a couple dollars more for the same tumblers with color. Instead of burning the paint, you would be removing the color down to the stainless. Great videos by the way, just found your videos today when looking for XTOOL videos

@TheClackShack 2 жыл бұрын

Yes, I have done lots of them. Pics on my FB page and here is a video. kzfaq.info/get/bejne/eL6Knq-arJzFmJ8.html

@JoeGalanteTribute 2 жыл бұрын

@@TheClackShack - Thank you. Looking at buying the new D1 Pro with a rotating piece. Will rely on your videos and will buy through your link when the time comes.

@TheClackShack 2 жыл бұрын

@@JoeGalanteTribute , as soon as it gets here. I will be putting it through the paces.

@anarchometalista9616 Жыл бұрын

Thumb up for the flag

@TheClackShack Жыл бұрын

Thanks

@nicholasweseman9704 2 жыл бұрын

What is the name of your etsy store to purchase your jigs

@TheClackShack 2 жыл бұрын

Clack Custom Creations

@fredericksmith8772 Жыл бұрын

How long did it take per tumbler?

@TheClackShack Жыл бұрын

Usually around 15 minutes with the 10 watt, 20 watt is faster.

@ericwood6124 8 ай бұрын

What are your settings?

@TheClackShack 8 ай бұрын

Should be in the video, this was over a year ago.

@chucklenz9011 Жыл бұрын

If u really wanted to make production add another roller to the left/right, front/back and just unload and reloading to the first roller while it’s burning the second cup. Push button and go through the cycle again.

@TheClackShack Жыл бұрын

That might be a little overboard, I am content with my method.

@mmorrissey9899 8 ай бұрын

As I was watching the video when you started the reclamation of the tumbler with the sander, it appears that you aren’t using hear protection of any sort. Hearing loss is cumulative, especially at the higher freqs. and volume as recorded on the video. As one who is now paying the price for years of thinking brief exposure isn’t much to worry about, I won’t even let contractors work without adequate protection.

@TheClackShack 8 ай бұрын

Thanks

@TheFeist77 2 жыл бұрын

if you don't put a sealer on the stainless steel after sanding it back, it will have rust spots. by sanding you removed the coating that is on stainless steel.

@TheClackShack 2 жыл бұрын

Guess I am lucky. It hasn’t rusted after a couple months. I must say that as a child,my dad built stainless steel whiskey stills. We never coated them with anything after welding or grinding them. 30 years later and they still look like new. It is my understanding that as long as the alloy contains more than 10.5 percent chromium, the reaction between the chromium and oxygen will reform the rust barrier.

@TheFeist77 2 жыл бұрын

@@TheClackShack I must have removed more on mine when I sanded. I don't know how thick the coating on stainless is, I may just need to be more careful on how much I remove, also the one that rusted on me was etched with a fiber laser, so that might be the difference.

@TheClackShack 2 жыл бұрын

@@TheFeist77 , it could have to do with an imperfection in the steel as well.