Do a test pan on your tailings to make sure you’re not loosing gold out the back!

Good job fellas!!

Turn the motor on idle and let it run the overburden off. Great job guys looks motivating. 👍

Hats off to you both.

Tilt that box a little, 5-8 degrees is a good start, If you ever need a bigger one I have a 4 and 5”, good luck see you fellers on the water!

Maybe try a jarvinne riffle in the front. Probably do well with a jarvine riffle and a dream mat. Be a fun experiment nonetheless

Nice color. Great work guys

First full video I've seen from y'all in quite a while! Y'all doing good! Still looking forward to a possibility of getting to join up with you guys sometime.

Watching you turn the pump on to clean out made me LMFAO 🤣

love the bigfoot @ 2:30

Great machine, great effort, bad spot

Nicely done. Start to finish 🎉

Recently found your channel and love it. Hope y’all find a bunch. I’ve always thought about doing what you are doing.

Right ON guys thanks for sharing

Nice work Justin!

It's really nice seeing you,s again

Enjoyed the hell out of it guys best of luck to you. You know you could put that pop up in the river and stay dry from the rain or get 2👍

The second run is sweet

Fun video to watch! My first dredge was a 3” combo and I spent most of the first 2 days learning the habits of the machine and how to tweak it. And it looks like you are having as much fun as I had! Blowing out the sluice trying to do a cleanup was hilarious!! It only takes a couple buckets of water to clean out my 6” so I would suggest doing cleanups manually. To prevent the riffles from getting too clogged I always start with my engines at full speed and slide the sluice back as far as possible so it’s as flat as possible. If I see the riffles clogging, I move the sluice back to give it more angle. I NEVER take my engines off of full speed because dredging is all about throughput. The more suction, the more material, the more gold. Fortunately sliding the sluice back and forth has always worked. I agree with swapping the punch plate with modern punch plate. Easier for the smaller material to get thru and increase water flow to keep it clean and efficient. I would actually keep the riffles. It looks like the gold in your area is big enough that it won’t affect gold capture. I only take out my riffles if the area is known for very, very small gold. Looking forward to see what the plan is for mods. Remember the golden (pun intended) rule - keep is simple stupid! There’s nothing worse than being in the middle of no where and some weird new fangled setup breaks.

Could you make a video on how you guys clean up all your gold from the black sand and everything would be nice to see how you do it everytime

nice gold thank you for sharing the adventure and information 😊

wow amazing my friend, very good video to watch my friend, thank you for sharing the video my friend.👍👍🤝🇮🇩

Catching it is catching it brother

Watching from philippines❤

Great job way to up your game it’s nice to see how much it worked congratulations

I'd be checking with a metal detector the tailing pile, a Finger size nugget would make it through.

L like how you guys work your GOLD !!!!!!!!!!

Nooooo 😂 I do it every damn time.. I'm literally like "OMG YESSSSSSSS" clicking all happy, ready to go on an adventure and then it's like "Ahhhhh, 40 something hours fool" and I die a little on the inside 💀 can't wait tho, looks like it's gunna be awesome as always. Love your channel guys!

Can’t wait to see the DM results!

I’m a local welder and would love to help you guys build stuff in the future. I’m learning to prospect myself and could use any advice I can get!

Wow that’s cool I have always wanted to do something like this but I don’t think New England has any good good spots lol

Nice rig

Cool video 🇮🇩💎⚒️⛏️🌸👍👍

I've done a lot of panning in Northern California. I've moved to North Carolina 18 years ago and I have a creek that runs through my property with a lot of pyrite and black sand and big boulders with a small waterfall I'm wanting to put a dredge in there see what I find

Nice work guys""🤘luv ya work✌️

I also think that you need a little bit more angle on the slice tray. But I’ve never sluiced tbh so idk.

Yeah buddddy!!!:)

Make sure your box angle is around 10 degrees and level….

just to ask do you have to use gas powered generators to power those dredges or can you use a couple solar powered generators that recharge themself with sun light ?

bedrock is where the big gold is

Nice!

Nice can’t wait

Where did you find the pontoons for your dredge?

So dredging is allowed in NC and will you need permit to prospect?

Good luck you guys,hope you do well.

Nice gold

Sad that your clean up didn't even cover your gas for the pump, even less so your time and vehicle gas.

Could you run the pump with solar. Lotta noise. I don't think I would want someone to know I was there .yo

i jus reliezed we live in the same town lol i havent had any luck at uwharrie yet thou

Bagus alat-alat nya untuk cari emas di Kalimantan

Nice job.

If you over fill the fuel tank over full it will serge due to vacuum 🤷🏼‍♂️ my pressure washer does it.

Water too slow or sluic box too low

Build in a hopper and capture your gems and agates …

What happened to you guy's I have been waiting for your new modifications on the dredge. I hope everything is ok with ya'll. I am heading down your way in two weeks to try out my new gold cube. If you could point me in the right direction of a couple of creeks to try I would greatly appreciate it.

niiiiiice

You would probably catch a lot more fine gold if you added 3 more feet to your sluice

I don't know what to say ... I'm a little disappointed. Hope you get lucky one day. Anyway, spending a day in nature is always good 🙂👍

So yeah, mistakes were made. But as long as you figure out what you did wrong, it's still a positive. You guys are gonna move some dirt this season! I was gonna take a "guess" at the weight, but I just watched Wills video, and that might be cheating,... el oh el

gold will be 60.00 a gram very soon. 2.46 x S60.00

gold always sits on bedrock

I think you need to change your mat ?

I really enjoy watching you guys!!! I’m just starting to learn about panning for gold!! YOU GUYS ARE SO HOT!!!!❤

Yeah fast is not good

.52 grams

50 bucks

.276

. 39

Put on a wet suit and go to work!🤣🤣🤣

Единственный русский комментарий

WINGNUT, not even. Tu

The second I saw that dredge I was thinking you need to loose about 60% of that mat, so good call there! However I still think you are blowing at least 50% of your gold out of the Sluice! You definitely need an intake box and i would put a 1" grizzly on the intake as well! New equipment is fun just gotta dial it in! All in all great job and hope you find the gold!!

You have your riffles totally clogged. Your loosing lots of fines.

Hey guys, hope you're doing alright? Getting a bit worried cause I'm starting to twitch cause I haven't had my video fix in a while and they're highly addictive! So yeah, just wanted to send some love and make sure everything is alright 💜

For all your time,effort and supplies using a 3-inch dredge that's a horrible ROI !

Are y’all losing any gold by running too fast?

Spend all day, several thousand dollars, collect $10 in gold... Yea, there is a reason no one gets gold other than YTbrs selling episodes and those dinking around for funz. It is fun, done it myself... in good weather... in poor weather utter misery!

Boring

.48