Using Reverb on the Behringer XR18

Рет қаралды 6,940

Күн бұрын

The Behringer X-Air has 4 effects racks internally on the mixer and using reverb on the Behringer XR18 is a quick setup! In this video I will show you how to route your channels to add reverb into your mix. An added bonus is that I'll show you how I route my vocal delay back into the reverb send to get a more complex sound to my vocals.
New Course!!
- Complete Guide To Mixing Audio on the Behringer X-Air: drewbrashler.com/x-air-course/
Products shown in this video:
Behringer X-Air XR18 Mixer:
- Sweetwater: sweetwater.sjv.io/EK6Z69
- Guitar Center: guitar-center.pxf.io/Or74aK
Chapters:
00:00 Intro
00:17 Effects Racks on the Behringer X-Air and Midas M-Air
00:34 How do Reverb Effects Work?
01:03 Post Fader Send for Effects on the X-Air
02:02 Sending Channels to the Reverb on the XR18
03:58 Preventing the Accidental Feedback Loop
04:50 Mixing a Vocal Delay into the Reverb
07:07 Conclusion

Пікірлер: 16

@user-ru9pn5um9b Ай бұрын

I just got my hands on cq18t from A&H. Hope you could do a lecture on it, esp xfs since they only provide handful. Always grateful for your contents! Really helpful!

@adventureseeker423 Ай бұрын

Loving these XAir specific videos!!! Keep it up!!

@1800nodavid Ай бұрын

Never thought about feeding a delay into a reverb like that, I'll try that next time! Thanks

@fusionsoundproductions Ай бұрын

It sounds good. I am going to try it too

@realbingus Ай бұрын

Thanks for this video, also very useful for our Midas M32. Knew some stuff, but learned a lot too :)

@DavidMend18 Ай бұрын

Thank You for doing this video

@UrMusicConceptz1 Ай бұрын

Thank you Drew

@TheJesusrep Ай бұрын

Hey Drew! I asked about the supper rack performer. I wanted to know if there’s a way you have found to apply it on the LR on the XR18?

@MKMTTG Ай бұрын

can you do a videi about Virtual soundcheck mixing on Behringer X Air 18.

@DavidMoonWainwright Ай бұрын

I'd love some comparisons of hardware controllers with the XAir series

@alan93 6 күн бұрын

the most confusing thing about that interface is how to get an effect on just one channel. I literally spend an hour trying to figure out how to not get delay on every channel and just put it on one vocal channel. did you explain that?

@donaldburns4462 Ай бұрын

This is a little off-topic, but I need help with saving a scene to a usb drive for safekeeping on the wing.

@djameleddinefenni3148 15 сағат бұрын

Is it possible to have a set of fx différents for every aux output Example Aux 1 : only snare has reverb Aux 2 : only vocals have delay Aux 3 : only bas has compression Etc etc

@kevinrodriguez3093 Ай бұрын

Hello, I bought a brand new XR18. Once I connected to it and tried to set up the latest firmware. All my channels are showing max signal levels. And no sound comes in or out of the mixer. Factory rest and loading different scenes. And even tried intializing the mixer and no change. Seems like it's locked up. Any ideas or solutions for this?

@leee79 Ай бұрын

Hey Drew Thanks for the video. I have a question. I have 7 vocals(1 lead and 6 back), which are fed to Hall reverb FX1 return. I have the FX going to the main LR, but not to any of buses.. All the vocals have wireless IEM setup and 3 floor monitors that are daisy chained. So Bus1 is for the lead, Bus2 is for the vocal 1 and so on, and Bus8 is for the floor monitor. Vocals want FX to be fed into their IEMs and when I feed the FX1 to a particular vocal’s IEM, FX return from all of the vocals go to that vocal’s IEM as well. Is there any way I can just feed just that vocal’s FX to that IEM? I am using Midas 32. Thank you.