Using the accelerometer and gyroscope on your Nano 33 BLE

Рет қаралды 13,955

Scott Fitzgerald

3 жыл бұрын

Library docs : www.arduino.cc/en/Reference/A...

Пікірлер: 5

@redstone51 3 жыл бұрын

My reply is same as ToolTimeTabor with the same request regarding the BLE!!! THANKS!!!

@ToolTimeTabor 3 жыл бұрын

HUGE BEAUTIFUL MAN! I am a total newbie to Arduino. Got my Nano 33 BLE today and have spent hours trying to a) get something to compile and install, b) get feedback of ANY KIND to tell me it worked. Your video did both. I finally have some sort of conceptual basis, using a working example, of how the programming is done. I got the accelerometer example working. By any chance, have you done the bluetooth connectivity portion? As I understand it, we need to a) define the service our Nano is going to provide as the peripheral, then b) advertise the service to make it visible to our client application, then c) send the client some information from our accelerometer (e.g. every time it goes from positive to negative and back). THANK YOU SO MUCH!

@maxwelljohnson8477 Жыл бұрын

what would you do if it keeps reading "failed to initialize IMU", would you get a new board?

@AFKBinding 3 жыл бұрын

Why are the gyroscope data not constant, even when its not moving?

@uchihasasuke7436 3 жыл бұрын

There will be a little bit of error, the sensor data isn't perfect. You can try to calibrate with some code but I dont usually bother with it lol Whatever you have the input as you can just make it a range instead of "1 = ledON and 2 = ledOff", you could say "0-1= ledOn and 1.01-2 = ledOff" just as an example