In case it is helpful, here are all my Matlab videos in a single playlist kzfaq.info/sun/PLxdnSsBqCrrEU0dLSrTcl0-w9cVYKMTaF. Please let me know what you think in the comments. Thanks for watching!
@boonerowen81273 жыл бұрын
not sure if anyone gives a damn but if you guys are stoned like me during the covid times then you can watch pretty much all of the latest movies and series on InstaFlixxer. I've been streaming with my girlfriend for the last few months xD
@lukasmarlon58463 жыл бұрын
@Boone Rowen yea, been watching on InstaFlixxer for months myself =)
@romanoscar47423 жыл бұрын
@Boone Rowen definitely, I've been watching on InstaFlixxer for months myself =)
@ESuryaG3 жыл бұрын
Sir I have been watching all these control videos and I have never been clear with my concepts ...thank you and I wish u could do a control design for renewable system like solar mppt...not like any other videos in other channels jus giving a mere model with no explanation so that I would be glad ...😇😇I'm a electrical student this will mean a lot to me or else pls help in making a convertor based modern controller video
@caramelsurpriz4 жыл бұрын
Bruh you've made more sense of this for me in 53 minutes than my professor has in two months.
@ChristopherLum4 жыл бұрын
I'm glad it was helpful. I have all my controls related videos in a single playlist at kzfaq.info/sun/PLxdnSsBqCrrEU0dLSrTcl0-w9cVYKMTaF. Please feel free to check it out and let me know what you think in the comments. I hope to hear from you again in another video. Thanks for watching!
@JulieLynnX883 жыл бұрын
SO MUCH OF THE YES
@samblake99534 ай бұрын
I know right? And it seems like this man does everything! I was just watching his wave equation derivation for my numerical methods for PDES class and now I’m looking for help on my control systems class and behold! Here he is! Thank you Christopher!
@zaneyosif Жыл бұрын
AE511: This really ties in all the past couple of weeks of lectures into designing control systems. It's pretty crazy how all the manual work we have done making the bode plots and root locus is done with the control system designer tool in matlab. It's a great tool in a situation where you are given design requirements and need to develop the system on the fly with said requirements in mind!
@AnilTasdemirT11 ай бұрын
It has been 3 years since this video is uploaded but your understanding and the delivery of it is outstanding. Thank you for your efforts.
@ChristopherLum11 ай бұрын
Hi, Thanks for the kind words, I'm glad you enjoyed the video. If you find these videos helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum or via the 'Thanks' button underneath the video. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. I can also answer any questions, provide code, notes, downloads, etc. on Patreon. Thanks for watching! -Chris
@nathanlipshutz3140 Жыл бұрын
AE511: This really ties everything together on the SISO controller design. Before watching this video, I was just thinking about all the different tools that you would have to cross-reference to adequately design a SISO controller based on what we've learned to-date.
@prashantpant85014 жыл бұрын
I have so much respect for you. Thanks for sharing your knowledge.
@ChristopherLum4 жыл бұрын
I'm glad it was helpful. There are several related videos on the channel. Please feel free to check them out and I would love to hear what you think in the comments. Thanks for watching!
@m.anitha60222 жыл бұрын
your language of explanation is indeed connecting with practical knowledge of more information . Its a wonderful video I found.thank you Sir
@wes15885 жыл бұрын
Great video on the control system designer. Very thorough breakdown on all the features!
@12turo3 жыл бұрын
all my dreams come true , Control System Designer :) ... thank you Professor Lum you are a wonderful teacher!!!!
@ChristopherLum3 жыл бұрын
I'm glad it was helpful. There are several related videos on the channel. Please feel free to check them out and I would love to hear what you think in the comments. Thanks for watching!
@sulabhkhare47004 жыл бұрын
Your method of explaining theory and then going to Matlab to apply it is impressive. I was looking for some good material on Control sytems and found your channel very useful. Thank you.
@ChristopherLum4 жыл бұрын
You are welcome. There are other similar videos on the channel, please feel free to check them out and let me know what you think in the comments. Thanks for watching!
@krystoflis71575 жыл бұрын
Excellent Overview of Control System Designer (Formally Siso Tool). The power of Control System Designer is huge.
@MrMARS-yk1yv3 жыл бұрын
my best of the best i love you soooo much. thank you isn´t enough. i found everything i needed here
@ChristopherLum3 жыл бұрын
I'm glad it was helpful. There are several related videos on the channel. Please feel free to check them out and I would love to hear what you think in the comments. Thanks for watching!
@darylfishback-duran35805 жыл бұрын
Very glad for this in-depth tutorial.
@mouhoudyassine18195 жыл бұрын
Thank you for your videos , I really appreciate the efforts that you put in. Huge respect
@ChristopherLum5 жыл бұрын
I'm glad you're enjoying them. I'll have a lot more coming so stay tuned. Thanks for watching!
@SPeeDKiLL453 жыл бұрын
what a beautiful explanation man great!
@ChristopherLum3 жыл бұрын
I'm glad it was helpful. There are several related videos on the channel. Please feel free to check them out and I would love to hear what you think in the comments. Thanks for watching!
@alanlee43265 жыл бұрын
AE511-Fantastic overview of the Control System Designer!now to use my 2 remaining wishes...1) It is worth noting that the creation of Simulink model functionality was first released in R2018a.2) (very minor, but just so I can use up my second wish) The example had settling time for within 2% of final value which didn't get inputted in the designer.
@ChristopherLum5 жыл бұрын
Alan, as always, thanks for the careful attention to detail. I will try to put a note in the video outlining the oversight about the 1% vs 2% final value.
@MrRadnartjie2 жыл бұрын
Thank you Christopher for this tutorial! You are a great instructor.
@ChristopherLum2 жыл бұрын
Thanks for the kind words, I'm glad you enjoyed the video. If the find the these videos to be helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. Thanks for watching!
@balasubramani21262 жыл бұрын
Very nice video. i didnt get like this earlier. Thank you christopher lum for making this. looking forward many videos like this...
@ChristopherLum2 жыл бұрын
Thanks for the kind words, I'm glad you enjoyed the video. If the find the these videos to be helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. Thanks for watching!
@harishkarneddi37493 жыл бұрын
Sir it makes clear idea on controlSystemDesign and thankyou very much sir
@rummanhuda22602 жыл бұрын
This was really helpful. Learned a lot from this session. Great work.
@ChristopherLum2 жыл бұрын
Hi, Thanks for the kind words, I'm glad you enjoyed the video. If you find these videos helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum or via the 'Thanks' button underneath the video. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. Thanks for watching! -Chris
@selamhendrix52525 жыл бұрын
this is such a powerful & well organized tool! thank you for breaking it down into easy to follow steps with tips.
@djlfjslkjflksdjlkfjs4 жыл бұрын
you are the man!Greaaaaaaaaaaaaaaaaat
@ChristopherLum4 жыл бұрын
I'm glad it was helpful. I have other similar videos at kzfaq.info/sun/PLxdnSsBqCrrEU0dLSrTcl0-w9cVYKMTaF. Please feel free to check them out and let me know what you think in the comments. Thanks for watching!
@karthikmurthy25113 жыл бұрын
Thank you. I have become your fan after watching your lectures.
@capitansheriff7426 Жыл бұрын
your channel is officially my favorite on my list. kudos professor
@ChristopherLum Жыл бұрын
Hi, Thanks for the kind words, I'm glad you enjoyed the video. If you find these videos helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum or via the 'Thanks' button underneath the video. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. I can also answer any questions you might have about any of the videos on Patreon. Thanks for watching! -Chris
@fabianv.o5732 жыл бұрын
Gracias bro, si en mi universidad explicaran como tu seria otra cosa
@omarmaaroof96215 жыл бұрын
You perfectly presented it, i will keep following your lectures. All respect.
@sidneykantor2 жыл бұрын
Amazing video! Thanks so much!
@ChristopherLum2 жыл бұрын
Hi Sidney, Thanks for the kind words, I'm glad you enjoyed the video. If you find these videos helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. Thanks for watching! -Chris
@nhuphan696910 ай бұрын
perfect tutorial !
@hichamelhaouari8592 жыл бұрын
High level Thank you Professor Lum
@user-fj6vc1uf5x4 жыл бұрын
Thank you so much. this video is really helpful.
@ChristopherLum4 жыл бұрын
I'm glad it was helpful. There are other Matlab videos on the channel. Please check them out and let me know what you think. Thanks for watching!
@andrewmelean8259 Жыл бұрын
Awesome!
@alexandercuchillovalverde6688 Жыл бұрын
gracias esta bien detallado el video
@GxAxL4 жыл бұрын
Amazing videos! thank you very much
@ChristopherLum4 жыл бұрын
I'm glad it was helpful thanks for watching!
@MAMTAMAHARJAN4 жыл бұрын
Thank you for the great videos. These are really helpful. Could you please upload gain and phase margin Video too?
@lxzhang49114 жыл бұрын
Hi sir, here is a reminder: Introduction to Gain and Phase Margin (TBD)
@ych16884 жыл бұрын
thank you! It help me a lot.
@ChristopherLum4 жыл бұрын
Glad it helped!
@DIYmaker12 жыл бұрын
Very nice, thanks you!
@ChristopherLum2 жыл бұрын
Thanks for the kind words, I'm glad you enjoyed the video. If the find the these videos to be helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. Thanks for watching!
@shakhzodbeksayidov21143 жыл бұрын
It was so usefull. Thank you!
@michaeltina38663 жыл бұрын
Nice video 👌👌👌👍👍👍
@MattAero5 жыл бұрын
ae 511, nice overview of this tool. It has nice capabilities, but Im most interested in its limitations with real world systems
@justinhendrick37435 жыл бұрын
I'm starting to come around on Matlab. I used to think it was a terrible programming language. Now I realize it's not really a programming language, more like a powerful toolbox with a scripting language gluing the pieces together.
@kaisemuw70745 жыл бұрын
AE 511. This is an incredibly useful app in MATLAB... Makes analysis a lot easier
@mahmoudel_dabah79465 жыл бұрын
Great work. Please may you illustrate digital control theory as classical control videos. Your style is excellent. Go a head. Ass. Prof. M dabah
@ilsAndrew4 жыл бұрын
Thank you, sir!
@ChristopherLum4 жыл бұрын
I'm glad it was helpful thanks for watching!
@havafazai90235 жыл бұрын
Thank you for good tutorial. It was really helpful.
@donabien-aime18843 жыл бұрын
AE511 sends me here!
@aarongettingup2 жыл бұрын
Amazing Thank You :)
@ChristopherLum2 жыл бұрын
Hi Aaron, Thanks for the kind words, I'm glad you enjoyed the video. If the find the these videos to be helpful, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum. Given your interest in this topic, I'd love to have you a as a Patron as I'm able to talk/interact personally with all Patrons. Thanks for watching! -Chris
@aarongettingup2 жыл бұрын
@@ChristopherLum thank you for letting me know, i will take a look. :)
@hmusawa133 жыл бұрын
Thank you
@gitarplayer135 жыл бұрын
AE511. What happens if you have conflicting requirements that over constrain the system? Does this cause an error with Control System Designer or are the requirements that are added to the plots just acting like guidelines?
@ChristopherLum5 жыл бұрын
Great question. These regions are more like guideline. There is nothing stopping you from adding too many constraints and leaving you with no solutions. In that case, you'll need to relax or remove some constraints.
@brianhumphreys51615 жыл бұрын
AE 511: very minor, but having the DC motor video links pop up at the start of the example (lab experiment and zeigler-nichols method) would have been nice.
@ChristopherLum5 жыл бұрын
Brian, thanks for the feedback, let me see what I can do about the links.
@nikkrause55465 жыл бұрын
Good intro for CSD
@smithdeagle10103 жыл бұрын
please upload the video on introduction to gain and phase margin
@scatteringparameters.41673 жыл бұрын
wow.
@edwardsanchez23315 жыл бұрын
ae511, another good video on a useful looking tool from matlab
@asitkumar77884 жыл бұрын
The link to the video "Introduction to Gain and Phase Margin"?
@catywhiskey41304 жыл бұрын
First of all, thank you for your effort, your videos are just amazing! I have a question concerning the controlSystemDesigner. Everything worked fine while I used it for PTn-Plants. But it doesn´t seem to work properly with ITn-Plants. I tried a fairy simple IT1-Transfer Function for my linear actuator I want to control and while the step resonse in Matlab (using step()) looked as expected, the step response in the csd did not look any similar. It doesn´t look like the typical ITn-response at all. Do you have any experience with that?
@timproby7624 Жыл бұрын
[AE 511] 5:55 Controls system genie!!!
@ironman5034Ай бұрын
In which video did you derive the dynamic model of the motor?
@lemonstealer29024 жыл бұрын
I love you
@gregorylay33334 жыл бұрын
This is great. However, an example that had a value for H(s) would have been better.
@dewanmohammedabdulahad57662 жыл бұрын
The video is very helpful. Thank you. However, what is the theoretical way to find the value of C ? Suppose, for System = (s+3)/((s+1)*(s+4)*(s+5)*(s^2+4*s+5)), I have to design a controller "C" to ensure rise time less than 3 sec and overshoot less than 5%. Considering F( input) = 1 and H =1. Because, it is hard to find the value of C by tunning different values.
@ChristopherLum2 жыл бұрын
Hi Dewan, Thanks for reaching out, I'm glad you enjoyed the video. Unfortunately I'm unable to respond to questions on KZfaq due to the sheer volume of inquiries that I receive. That being said, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum as I'll be able to answer questions there. Given your interest in the topic, I'd love to have you as a Patron as I'm able to talk/interact personally with Patrons. Thanks for watching! -Chris
@pallavichaturvedi18342 жыл бұрын
Thanks for such great teaching..made our journey with control much easier..need ur help as how can i write tf in matlab with complex zero . Tf = K( s+K)+jw/(s+k)^2+w^2 Appreciate ur help !!
@ChristopherLum2 жыл бұрын
Thanks for reaching out. If you have questions or would like to request a video, please consider supporting the channel via Patreon at www.patreon.com/christopherwlum. I interact personally with Patrons at all levels. Thanks for watching!
@timproby7624 Жыл бұрын
[AE 511] 39:00 So root locus is only 100% valid for 2nd order systems? Regardless input, if you have a 3rd order denominator, the root locus regions are not 100% accurate?
@ChristopherLum Жыл бұрын
No, the root locus is valid for any amount of poles. The equations for things like PO and settling time that are functions of wn and zeta are only exactly valid for 2nd order systems.
@user-du2pt4zv5i3 жыл бұрын
I’m very new in this topic. Can I know how to design the plant model?
@Zeroksis2 жыл бұрын
Where can I find the videos of the design of P and PID controllers?
@ChristopherLum2 жыл бұрын
Hi Derek, Thanks for reaching out, I'm glad you enjoyed the video. Unfortunately I'm unable to respond to questions on KZfaq due to the sheer volume of inquiries that I receive. That being said, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum as I'll be able to answer questions there. Given your interest in the topic, I'd love to have you as a Patron as I'm able to talk/interact personally with Patrons. Thanks for watching! -Chris
@kristenleenerman13515 жыл бұрын
Describes a tool for designing control systems in Matlab
@4kstreamer442 жыл бұрын
can you adjust the input function
@ChristopherLum2 жыл бұрын
Hi, Thanks for reaching out. If you have questions or would like to request a video, I hope you'll consider supporting the channel via Patreon at www.patreon.com/christopherwlum. I'd love to have you as a Patron as I'm able to talk/interact personally with Patrons. Thanks for watching! -Chris
@4kstreamer442 жыл бұрын
@@ChristopherLum yeah you just adjust F. You also have you see what your blocks look like inside so you have to do some math.
@salahazizou4 жыл бұрын
thank you for your videos i have learned a lot of thing from them, plz i have a question i have this open loop transfer function G=20/(p*(p+10)*(p+1)*(p-1)). But when i do a feedback the system is stay unstable and goes rapidly to infinity i have tried to stabilize it by adding a gain so i can have a positive phase margin, but even though the positive phase margin and infinite gain margin the system still unstable please can you help me. Can i use a pid controller to stabilize it? And how can I do that? Thank you.