U.S.SAWS Core EZ: Advanced Core Drilling System

Рет қаралды 2,312,953

8 жыл бұрын

The Core EZ is the most efficient, portable, and versatile core drilling tool on the market to date.
The Core EZ is a portable, easy to use core drilling system. The Core EZ anchors at the center of the core, so there is no off-set mounting! The Core EZ holds the core once drilling is complete.
The unit is compact and can drill in small, hard-to-reach places. The entire unit comes in a wheeled case and weighs less than 50 pounds.
For more information, please contact U.S.SAWS at 877-817-6687 or visit our website at www.ussaws.com/.
Subscribe to our channel for the latest U.S.SAWS videos: / ussawsvids
U.S.SAWS offers a commanding & robust equipment for the construction industry that matches the toughest environments nature has to offer. Our equipment allows you to keep pace and stay effective in the most challenging types of conditions.

Пікірлер: 388

@hardcase1659 3 жыл бұрын

This is just great. Rare to see well thought out tools nowadays.

@fencegodhittaz8192 6 жыл бұрын

Jeez this things helps me at my job site all the time

@OrcForge 2 жыл бұрын

This was the coolest video I've seen all day!

@toobglued 6 жыл бұрын

what a beautiful invention. awesome tool.

@USSAWS 4 жыл бұрын

Thanks!

@cloviskouame6511 5 жыл бұрын

This machine is the best drill that I have to use.On has acquired 1 and frankly it is the top of the top .1 carrot of 25cm in 10min. There's nothing better. Thanks to allemends and bravo to the Americans for the system.

@USSAWS 4 жыл бұрын

Glad you enjoy the system!

@49erwindchaser 4 жыл бұрын

I rented the unit. Never drilled before except with a hammer drill. Drilled 6 6” holes in no time and exactly where I wanted. Short learning curve, feels safe to use especially when you discover the clutch kicks in smoothly and at manageable load. I would let my wife use it.

@USSAWS 4 жыл бұрын

Awesome!

@AlphatecEngineering 3 жыл бұрын

Great video folks!

@charlest.velten6983 5 жыл бұрын

LOVE TO HEAR FROM ALL THE WEEKEND WARRIORS WHO KNOW IT ALL !

@eugenenoah6639 3 жыл бұрын

Less dust..great system

@thatguywiththeface1741 6 жыл бұрын

I'm good with the Hilti core drill I use. The anti-jam clutch isn't a new thing, been around for quite some time

@marbleflooringjitendrasharma 6 жыл бұрын

Nice

@nadeembajwa4482 6 жыл бұрын

Pliss call me 00966559074251

@USSAWS 3 жыл бұрын

@@nadeembajwa4482 you can give us a call at 866-987-7297 or e-mail us at sales@ussaws for more information

@VuongNguyen-pr8ls 6 жыл бұрын

Wow very easy and safe to works

@oldtruk9466 4 жыл бұрын

Отличная,и необходимая технология! Суппер парни придумали! Успехов в работе! Привет из России!!!

@realgg8712 4 жыл бұрын

Когда попадут на полумесяц(произойдёт клин коронки), этот парень останется без руки! И с переломанными ногами) 100 % .

@oldtruk9466 4 жыл бұрын

@@realgg8712 есть такое опасение.Успехов

@oetken007 6 жыл бұрын

4:12 A shielding to reduce the splatter would make it perfect.

@USSAWS 3 жыл бұрын

There are slurry rings available to help.

@markmozsem 2 жыл бұрын

@@USSAWS sir tell me pleas .from where i buy core ez system. Really i need it.

@markmozsem 2 жыл бұрын

@@USSAWS i am from india and here is not available.

@yeahwerepthesamesmartech7113 6 жыл бұрын

I work in masonry.. this is a great tool to have

@garymoreau2444 7 жыл бұрын

This is a great coring system

@alanshelby5980 6 жыл бұрын

Very nice tool.

@sri3445 5 жыл бұрын

Technology fantastic

@786otto 6 жыл бұрын

looks good

@Technical-1234 6 жыл бұрын

Good job

@itsmisterchris 6 жыл бұрын

This is so cool

@nikunjmpatelssddffddserrd1963 3 жыл бұрын

HfzsxhsDdZffsgaFDFxjdjhsdsidausfjqhjihsuidwewgygwf vegghbz Hzbdhsshgdgdddsfgggzsjzizdarkgsgidsjxzvvvvzzfzffsfzd. BzhHdhcffzvhgfdaf

@corbonzo1 6 жыл бұрын

the new Payday DLC looks great

@karamatali2460 3 жыл бұрын

Very good this video

@IntegraDIY 6 жыл бұрын

How do you set a guide post at an angle.. to use the core bit at an angle

@user-gj6nu5cb9z 5 жыл бұрын

Отличная штука!

@scarpionsila9762 6 жыл бұрын

Вооот этоо вещь!!! 👍

@Goldersan 6 жыл бұрын

Super :-)

@ricardograciaspisfil1414 5 жыл бұрын

Muy buena idea

@schorschdorsch810 4 жыл бұрын

And if the jam remains, your fins will break or what is it like?

@JZ-tg1cm 3 жыл бұрын

You need a splash guard wet dry vacuum accessory to contain over flow of the water. That's always a challenge when ever we core in existing spaces with carpets n stuff. It can really complicates things.

@USSAWS 3 жыл бұрын

We sell Kor-It slurry rings that are very helpful.

@akaredcrossbow 2 жыл бұрын

Need a second technician to operate a wet vac, and suck up all the water.

@RileyGoss 6 жыл бұрын

Always wondered how core drilling was done.

@muhhamadtahir9072 4 жыл бұрын

Mesinnya sdh renopasi

@shazadhussain4204 3 жыл бұрын

I wonder if I can modify my Harbor Freight oscillating tool to do the same thing.

@julianreverse 6 жыл бұрын

German power tools are simply the best, even in the US :-D

@aitherkratos5939 5 жыл бұрын

German power - where is, it is the sound was gone, song of this times is Alahu achbar. Germany is lost

@Raven-fu1zz 6 жыл бұрын

I got a call in middle of this video, and I had to say "sorry, im busy"

@USSAWS 4 жыл бұрын

We don't monitor the site in that way. Sorry that you received a call for sales pitch.

@drozcan 4 жыл бұрын

@@USSAWS lol

@CGFUN829 3 жыл бұрын

@@drozcan lmao what a funny misunderstanding here.

@firozahmed6991 4 жыл бұрын

I need this one

@USSAWS 4 жыл бұрын

You can buy online at www.ussaws.com or give us a call 866-987-7297.

@BushTuned 3 жыл бұрын

How do you go about cracked cores?

@maratvakurow7434 4 жыл бұрын

А если керн сломался, что делать? И анкер уже не держит

@HeavilyArmed 6 жыл бұрын

I don't have a use for one of these, but I want one.

@andrealazalo6206 5 жыл бұрын

Well drilingi woter

@recepyigit5556 3 жыл бұрын

Woaw welcome 🌹 Tahank you 🌹

@michaelburnell604 3 жыл бұрын

A genuine question, how would this work with a cavity wall?

@bazoldragth 6 жыл бұрын

take my money !!!

@bakerrrc1900 6 жыл бұрын

Can I get it down a liftshaft and make a hole big enough for me to climb through?

@ProfStroySnab 6 жыл бұрын

nice :)

@gedeontorval1907 6 жыл бұрын

ПрофТехСнаб | www.tool-tech.ru l

@jresquivel7389 6 жыл бұрын

Here is the real question can it cut though a reinforced safe

@kencleopas4392 Жыл бұрын

What if the core sample needs to be tested via compressor?

@jasonhull2163 6 жыл бұрын

I cannot get into the idea of a Angle Grinder running this bore. The adapter would have to have insane gear reductions. Although I do see a Metabo Grinder being used. That is definately a plus.

@piotrekmotas 6 жыл бұрын

TAKE MY MONY NOW!

@ranaarifbilal8884 4 жыл бұрын

03 year Experience Concrete core cutting machine operator .Which site does concrete core cutting jobs take? i need job

@MinkieWinkle 3 жыл бұрын

you didn't show, , bad camera shot, when cutting down, Wont the hole rig just drop once it penetrates the other side smashing it into the upper surface of the surface you just cut? if the operator was not expecting it to penetrate at that moment, if they are holding on to the rig, depending of the weight of the core of course, could they not do some serious harm to their back when it drops, pulling them down suddenly with the rig ? other than that, it is a great looking tool.

@rentaldeherramientas3077 4 жыл бұрын

Good afternoon. what tool is it from Argentina ALQUIMAX Rental

@bailoncreed7536 6 жыл бұрын

It seems this system could lack in torque compared to others due to being angle driven. I get the concept and that it has a better clearing radius.. But I am very curious to see how this system would hold up in really bad binding.

@oliverabogado8399 4 жыл бұрын

A salesmen pitched this to the company my brother and i worked for, As he was drilling he broke the core of before it was all the way through. He asked the sales guy what now and that was the end of it. This a cool system but its dependent on the anchor completly, It's common for cores to break due to mooning rebar or cutting tie wire and getting jammed up.

@hangngoaigiare 4 жыл бұрын

still can be a great for tight space and up high i think. one time it take us 2 guys several hour to set up a core drill. we have to take the drill apart and assembly them back together up high 10 ft in the tight spot in the ceiling.

@shiekarfan86 6 жыл бұрын

I want tis product..

@markmozsem 2 жыл бұрын

I am also need this

@wickedleeloopy2115 4 жыл бұрын

As a plumber , I want one...

@USSAWS 4 жыл бұрын

Feel free to reach out to us at 866-987-7297 or sales@ussaws.com

@rosinaldogamagama7006 5 жыл бұрын

onde tem no Brasil???

@raghukalwaddar3584 2 жыл бұрын

I want this its work IN Stone also?

@alitonekaboni-dg2tn Жыл бұрын

Thats very good machine. Whats name of all part this machine?

@quinguyen3920 5 жыл бұрын

what happen if the core breaks while drilling? or the anchor came lose?

@dannyseay4409 3 жыл бұрын

Was thing the same thing

@mickg4378 3 жыл бұрын

What happens if the core snaps after the anchor depth, and before you’re through the slab?

@africanelectron751 3 жыл бұрын

Well you fucked then.... What I would do I re attache a smaller core than the inside diameter and drill a ll the way through then use a chissle to remove the thin layer or cement around the inner surface of the broken cutter. At this point you weld a puller to the broken coring tool and pull. Then finish the job. But in all likelihood the tube of the cutter is far less likely than the union between the tube and the shaft it connects to. ps in really high at the moment so I could be talking shit.

@mickg4378 3 жыл бұрын

@@africanelectron751 should just stick with the offset rig and anchor bolt, if it ain’t broke don’t fix it 👍

@antongyrt4814 6 жыл бұрын

Изи изи ноу хоу супер пупер мега макс!

@alkeshsoni6473 4 жыл бұрын

But where is the purchase bro

@twistyturd 6 жыл бұрын

Great video kept me busy whist waiting for a poo to fall out my arse

@get-the-lead-out.4593 6 жыл бұрын

yawn yawn....no one cares

@ASIFMUGHALKUWAIT 6 жыл бұрын

How much this attachment....?

@user-cp4is2ih7h 4 жыл бұрын

코어내요 영상감사합니다

@shinidagewo-jl7oo Жыл бұрын

I want to have a set. Is it available? How can I contact you to buy it

@stevencarnell4917 6 жыл бұрын

If the exact depth of a floor slab is not known. How do you stop the drill from over drilling?

@succulentflakesofperfectly5541 6 жыл бұрын

just pull out pieces by pieces

@robertopics 5 жыл бұрын

Floor slabs are usually 3"-5" Feedback or the lack of it will let you know you're done.

@likilikiki 4 жыл бұрын

Looks nice and all but i would go insane if i had to use both hands the entire time. And what happens with the set-up when you drill a hole in the floor but don't know the thickness and go through unexpected?

@USSAWS 4 жыл бұрын

Give us a call 866-987-7297 and we can walk you through any concern!

@likilikiki 4 жыл бұрын

@@USSAWS Thanks for the offer but i think i'll stick to my Hilti set-up :P

@USSAWS 4 жыл бұрын

@@likilikiki They have a great set up as well!

@19bjerke88 6 жыл бұрын

Can i use my bits that i already have with it?

@USSAWS 4 жыл бұрын

No, we have specialized bits for the machine.

@user-jc8pd5rd5s 6 жыл бұрын

Thank you now I will go rob a bank

@copee2960 6 жыл бұрын

Anybody else here because of the Hatton garden job. ha ha.

@sanketsavant3176 6 ай бұрын

Hello I am from India, how can I purchase, Please guide

@megachanel8815 6 жыл бұрын

💪👏👍

@futurecaredesign 4 жыл бұрын

Could this be used for wood? I trying to find an easy way to make birdhouses in trees similar to a woodpecker :)

@futurecaredesign 4 жыл бұрын

I wouldn't drill them too deep and remove the excess wood with an SDS bit sharpened to a chisel, mounted on a rotary hammer drill. I would plug the hole with a circular cap hammered into it, with an appropriately sized hole for the birds.

@user-se5tk8xp5y 3 жыл бұрын

2صضصذذضذذذذذشذصذذصذذصذضذذذذذذصذضصذسصضضذضذصذذذضشضضضشذذضضضضضضضضضضشذص

@chitharanjenkg7706 6 жыл бұрын

What the material to used as coring tool,diamond or tungsten carbide?.

@thatguywiththeface1741 6 жыл бұрын

chitharanjen kg tungsten carbide usually

@chitharanjenkg7706 6 жыл бұрын

Seth Carron ,Thank you.

@zstrode.8953 6 жыл бұрын

Carbine forsure

@elyeli6250 6 жыл бұрын

lol half of these people are asking for this channel to contact them when they can easily look up the company online. and buy it there for ~$3,000

@SuperAWaC 6 жыл бұрын

indians dont really understand how the internet works

@RingoAnselmo 5 жыл бұрын

You dont pay any atention to those. Not real clients...

@umarjalal397 5 жыл бұрын

@mjuarez2099 6 жыл бұрын

how much, i need to make a hole on Sheetrock to install a light fixture

@USSAWS 4 жыл бұрын

Feel free to give us a call 866-987-7297 and we can walk you through.

@MShahzaibwoodwork 3 жыл бұрын

Naic bro Wood carpantar shahzaib

@rusorusonnegron262 7 ай бұрын

QUIERO SABER SI HACE MUCHO RUIDO, TODO CASO, EXISTE UN EQUIPO QUE NO HAGA RUIDO? , I WANT TO KNOW IF IT MAKES A LOT OF NOISE, IN ANY CASE, IS THERE A EQUIPMENT THAT DOES NOT MAKE NOISE?

@ben3462 3 жыл бұрын

How much is this fine tool a pretty penny I know

@USSAWS 3 жыл бұрын

Link to purchase the Core EZ: www.ussaws.com/core-ez-core-drilling-machine it is priced at $2975.00

@fayyazkhan1602 3 жыл бұрын

This better than hilti

@pubgromania6865 6 жыл бұрын

the water flowing down the walls says it rains the mechanism

@MrMarukas86 5 жыл бұрын

Stand are much easier and no that much vibration.

@davidvillalva1284 4 жыл бұрын

Quiero ésa máquina cuánto cuesta$ soy de Argentina

@rajupersaud8341 7 жыл бұрын

Hi,where can I get one of these

@deserteagle1166 7 жыл бұрын

Raju persaud nowhere

@rahulsalunkhe3117 6 жыл бұрын

I am buying machine prizes kiti ahe kuthe milelal ( Pune madhe milelal ka)

@orellaminx3530 6 жыл бұрын

4:08 So, is that crack going to be a problem?

@ezequielfuentes1823 4 жыл бұрын

I think its water

@refaan1 4 жыл бұрын

Yes it's water

@user-hd5dx4su7n 2 жыл бұрын

Одно отверстие один анкер. А если выбуривать дверной проем?

@XavierAncarno 6 жыл бұрын

Open a bank vault with this things

@tatterz__ 6 жыл бұрын

Xavier Ancarno bout to say that, happened as well in some bank stealing over 1 mill in pounds

@PayrollTips 6 жыл бұрын

Just what I was thinking ;)

@jordandurham8951 6 жыл бұрын

Hatton garden heist

@mmsabre7931 6 жыл бұрын

My first thought!

@sledgenwedge 6 жыл бұрын

Xavier Ancarno not really after pumping concrete for many years they add stuff into the concrete that will slow the bit cover the diamonds and eventually lock up the bit it's in the concrete mix most modern banks have shredded Steel along with ball bearings and rebar all around

@mikeperoutka7475 6 жыл бұрын

No dust suppression on hammer drill ooo I get yelled at all the time

@beingooljalool 3 жыл бұрын

what is the maximum diameter available for core bit. please reply.

@USSAWS 3 жыл бұрын

10"

@abuwsm 6 жыл бұрын

it is looks as grinder tool> there is a gear add to it chang it to core drill pls where i find the gear

@USSAWS 4 жыл бұрын

It is a core drill.

@timohan100 6 жыл бұрын

Love to see that toy hit some #7 rebar...never hold up on a real job site.

@MrMarukas86 5 жыл бұрын

Agree try to drill 20 holes with this 350 deep with 127 bit. You will lose your hand :) not for professional use

@USSAWS 4 жыл бұрын

There are many contract cutters using our core drill. Our machine is made for holes between 3" to 10". Feel free to reach out if you have questions.

@rockknock5866 3 жыл бұрын

@@USSAWS So are you a core drill manufacturer? If yes please send me your manufacture details, if not where where I can buy these tools these tools looks very handy , thank you appreciate it.

@USSAWS 3 жыл бұрын

@@rockknock5866 Yes, we manufacture the core drill. If you e-mail us at marketing@ussaws.com we will send you a list.

@rockknock5866 3 жыл бұрын

@@USSAWS Great , I really appreciate that, thank you 🙏 , here is my email , nischalrj94@gmail.com

@elfrodo5460 5 жыл бұрын

How much price ??

@neyazansari3351 6 жыл бұрын

What is price of machine

@frankwacker3520 3 жыл бұрын

Wenn das gut wäre dann würde das auch bei uns geben

@shahramtabas5164 2 жыл бұрын

A Metabo mill and a simple metal converter with a single $ 4,200 bit do not seem too expensive, although it has become easier to increase the price. This is not fair.

@USSAWS 2 жыл бұрын

It's more of a complex innovative system to why the price is higher, we also manufacture in the states. Sorry you feel this is over priced.