Schlumpf Mountain Drive Installation Procedure | Utah Trikes
Рет қаралды 9,040
If you're looking for a unique front gearing option, the Schlumpf Mountain Drive and High Speed Drive are some excellent options. Installation can be a little tricky as it requires chamfering your boom. Stick with Lewis while he walks you through the process.
Schlumpf Mountain Drive/High Speed Drive: www.utahtrikes.com/UTCAT-180.html
Chamfer Tool: www.utahtrikes.com/PROD-11618879.html
Visit us at UtahTrikes.com for more information!
@keithguiste2659 4 жыл бұрын
EXCELLENT! Very informative, detailed video, good job Louis.I have seen multiple explanations of this installation but none of the others mentioned the 41mm requirement on the chamfer or the alignment of the grooves on that driveside washer. Thank You for an excellent video
@christopherw1708 4 жыл бұрын
Lewis is an amazing mechanic. Much appreciated.
@eca7773 2 жыл бұрын
Shows how childish I am, I laughed hard when he said "Back off these Nuts"
@GreyWolfeOutdoors 4 жыл бұрын
Thanks for kaking this video and sharing it. I'm about to order a trike with this on it.
@stompindakka3222 4 жыл бұрын
Nice video!
@zachwasil Жыл бұрын
Funny I have been running a schlumpf on a racing bent for about 10 years, never chamfered anything and tightened the lock nut with channell-locks, zero slippage...ever.
@beaudjangles 2 жыл бұрын
Great video. I’d just add some cutting fluid when doing the chamfering so to not wear the tools out and improve the cut.
@tarunntarunn 4 жыл бұрын
Hello Utah Trikes, Could you explain the correct process to grease the Schlumpf Speed drive?
@massmanute Жыл бұрын
Do you offer chamfering service for local clients who want to do the rest of the installation themselves?
@kjm-ch7jc Жыл бұрын
Could do with some cutting fluid pal, you did say the tool was pricey.
@dangalpern2979 3 жыл бұрын
Why did Lewis utilize no grease on the drive and crank arm threads?
@yourstruly9340 2 жыл бұрын
Nice video but you forgot one important step to mention the proper torque when tightening
@zachwasil Жыл бұрын
Funny I have been running a schlumpf on a racing bent for about 10 years, never chamfered anything and tightened the lock nut with channell-locks, zero slippage...ever.
@kenscott4811 2 жыл бұрын
HOW WOULD YOU ADD MORE CHAIN RINGS TO GIVE MORE GEARS ON A MOUNTAIN UNIT ?
@FlyNatural Жыл бұрын
Where else can you get one of those chamfering tools, it says it’s out of stock on your website, so if I wanted to do this myself where could I buy one of those?
@zachwasil Жыл бұрын
Funny I have been running a schlumpf on a racing bent for about 10 years, never chamfered anything and tightened the lock nut with channell-locks, zero slippage...ever.
@monkeyhaters9258 Жыл бұрын
So the schlumpf itself is expensive ,🤔and then you have to buy a one time expensive tool to put it in😳🤦♂️
@UtahTrikesOnline Жыл бұрын
Most people will send their bottom bracket in to have us so it or rent the tool.
@monkeyhaters9258 Жыл бұрын
@@UtahTrikesOnline Doesn't sound much cheaper...?
@jeffstrait2212 4 жыл бұрын
Louis umm umm umm really umm umm
@UtahTrikesOnline 4 жыл бұрын
*Lewis* and it's actually "umm errmm really umm erm." It would be a travesty for Lewis' eloquence to be misquoted.
Gufee.medalin
Рет қаралды 9 МЛН