Vacuum Chucking for Woodturners Part 2 of 2

No video

Vacuum Chucking for Woodturners Part 2 of 2

Рет қаралды 5,733

Steve Criscenzo Woodturning

Күн бұрын

Пікірлер: 20

@danielmetzler307 11 ай бұрын

Great video. Have a vac. Pump and liked all the basic and advanced tips. Learned some more details of how to improve my system.

@prsearls 2 жыл бұрын

Really good information. Your knowledge, experience and recommendations satisfied all of my questions.

@crackerjack3359 2 жыл бұрын

Thanks Steve. That's two excellent videos on vacuum chucking. I had been thinking of buying a thread cutting jig as my next step forward but I'm I'm thinking that this will have a lot more regular uses.

@aaroncarey7209 Жыл бұрын

Great video! Ive been wanting a vacuum chuck for awhile. i decided on the Frugal. i called him today to find out hes retired from the business. back to the drawing board for me.

@kugeldrechsler866 8 ай бұрын

Dilettantic work on the PVC plastic tubes!

@mattradtke2190 3 жыл бұрын

Great info, fantastic video.

@bowlreveal 3 жыл бұрын

Smart dude enjoying his equipment. That’s how he got it. Great information, Thanks will contact Frugal Vacuum

@johnnyspropshop 2 жыл бұрын

Thanks for sharing, enjoyed it.

@stevef1314 3 жыл бұрын

In situations where there is not a centre mark to reference, I use a spindle adapter (sold by Oneway) on my Oneway live centre so I can mount my chucked workpiece on the tailstock and bring it up to the vacuum chuck. Once the vacuum is established I can release the workpiece from the chuck and remove the tailstock.

@larrysmelcer7966 3 жыл бұрын

were helpful thanks for sharing the video stay safe

@mikesbackyardgarage5578 6 ай бұрын

what did you use for a seal surface on the pvc !! That info would be helpful !

@garycrooks9881 Жыл бұрын

Steve will your homemade vac chucks work with the Hold Fast System?

@mikeb4555 11 ай бұрын

Watched this video today (09/16/23), is the creator monitoring/answering questions (one of the questions suggested otherwise, that this person retired?)

@Jestey6 10 ай бұрын

Looks like it. The one part he missed was how to seal the vacuum pipe into the hole in wooden base, whilst allowing it to remain stationary, i.e. not rotating when the chuck revolves. However I found an easy way on another video, which used a small ball race epoxied into the wooden base, with the pipe epoxied into inner bearing 😊

@mikecrouch1613 2 жыл бұрын

what type of adapter should I use for my powermatic 3520a

@kugeldrechsler866 8 ай бұрын

You have explained the Rotary Vein Pump (Drehschieberpumpe) in a wrong way! The Rotation is clockwise. At the right side is the suction side: vacuum connector! Der Rotor rotiert nach rechts , dort ist auch die Ansaugseite!! Best wishes!